* [dts] [PATCH V1 1/2] test_plans/dynamic_flowtype: remove a cmd to adapt dpdk
2021-06-02 8:01 [dts] [PATCH V1 0/2] dynamic_flowtype: remove a cmd to adapt dpdk Xiang An
@ 2021-06-02 8:01 ` Xiang An
2021-06-07 8:53 ` Lin, Xueqin
2021-06-02 8:01 ` [dts] [PATCH V1 2/2] tests/dynamic_flowtype: " Xiang An
2021-06-09 7:12 ` [dts] [PATCH V1 0/2] dynamic_flowtype: " Tu, Lijuan
2 siblings, 1 reply; 6+ messages in thread
From: Xiang An @ 2021-06-02 8:01 UTC (permalink / raw)
To: dts; +Cc: xueqin.lin, Xiang An
Signed-off-by: Xiang An <xiangx.an@intel.com>
---
test_plans/dynamic_flowtype_test_plan.rst | 48 +++++++++++--------------------
1 file changed, 16 insertions(+), 32 deletions(-)
diff --git a/test_plans/dynamic_flowtype_test_plan.rst b/test_plans/dynamic_flowtype_test_plan.rst
index 83ed5eb..ad68536 100644
--- a/test_plans/dynamic_flowtype_test_plan.rst
+++ b/test_plans/dynamic_flowtype_test_plan.rst
@@ -176,22 +176,18 @@ Test Case: Update flow type to GTP-U IPv4 pctype mapping item
testpmd> show port 0 pctype mapping
-4. Add udp key to hash input set for flow type id 26 on port 0::
-
- testpmd> set_hash_input_set 0 26 udp-key add
-
-5. Enable flow type id 26's RSS::
+4. Enable flow type id 26's RSS::
testpmd> port config all rss 26
-6. Start testpmd
+5. Start testpmd
-7. Send GTP-U IPv4 packets, check RSS could work, print PKT_RX_RSS_HASH::
+6. Send GTP-U IPv4 packets, check RSS could work, print PKT_RX_RSS_HASH::
>>> p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header()/IP()/Raw('x'*20)
>>> p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP()/Raw('x'*20)
-8. Send GTP-U IPv6, GTP-U PAY4 and GTP-C PAY4 packets, check receive packets
+7. Send GTP-U IPv6, GTP-U PAY4 and GTP-C PAY4 packets, check receive packets
from queue 0 and don't have PKT_RX_RSS_HASH print.
@@ -209,22 +205,18 @@ Test Case: Update flow type to GTP-U IPv6 pctype mapping item
testpmd> show port 0 pctype mapping
-4. Add udp key to hash input set for flow type id 23 on port 0::
-
- testpmd> set_hash_input_set 0 23 udp-key add
-
-5. Enable flow type id 23's RSS::
+4. Enable flow type id 23's RSS::
testpmd> port config all rss 23
-6. Start testpmd
+5. Start testpmd
-7. Send GTP-U IPv6 packets, check RSS could work, print PKT_RX_RSS_HASH::
+6. Send GTP-U IPv6 packets, check RSS could work, print PKT_RX_RSS_HASH::
>>> p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header()/IPv6()/Raw('x'*20)
>>> p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IPv6()/Raw('x'*20)
-8. Send GTP-U IPv4, GTP-U PAY4 and GTP-C PAY4 packets, check receive
+7. Send GTP-U IPv4, GTP-U PAY4 and GTP-C PAY4 packets, check receive
packets from queue 0 and don't have PKT_RX_RSS_HASH print
@@ -243,22 +235,18 @@ Test Case: Update flow type to GTP-U PAY4 pctype mapping item
testpmd> show port 0 pctype mapping
-4. Add udp key to hash input set for flow type id 24 on port 0::
-
- testpmd> set_hash_input_set 0 24 udp-key add
-
-5. Enable flow type id 24's RSS::
+4. Enable flow type id 24's RSS::
testpmd> port config all rss 24
-6. Start testpmd
+5. Start testpmd
-7. Send GTP-U, PAY4 packets, check RSS could work, print PKT_RX_RSS_HASH::
+6. Send GTP-U, PAY4 packets, check RSS could work, print PKT_RX_RSS_HASH::
>>> p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header()/Raw('x'*20)
>>> p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/Raw('x'*20)
-8. Send GTP-U IPv4, GTP-U IPv6 and GTP-C PAY4 packets, check receive
+7. Send GTP-U IPv4, GTP-U IPv6 and GTP-C PAY4 packets, check receive
packets from queue 0 and don't have PKT_RX_RSS_HASH print.
@@ -274,22 +262,18 @@ Test Case: Update flow type to GTP-C PAY4 pctype mapping item
3. Check flow ptype to pctype mapping adds 25 this mapping
-4. Add udp key to hash input set for flow type id 25 on port 0::
-
- testpmd> set_hash_input_set 0 25 udp-key add
-
-5. Enable flow type id 25's RSS::
+4. Enable flow type id 25's RSS::
testpmd> port config all rss 25
-6. Start testpmd
+5. Start testpmd
-7. Send GTP-C PAY4 packets, check RSS could work, print PKT_RX_RSS_HASH::
+6. Send GTP-C PAY4 packets, check RSS could work, print PKT_RX_RSS_HASH::
>>> p=Ether()/IP()/UDP(dport=2123)/GTP_U_Header()/Raw('x'*20)
>>> p=Ether()/IPv6()/UDP(dport=2123)/GTP_U_Header()/Raw('x'*20)
-8. Send GTP-U IPv4, GTP-U IPv6 and GTP-U PAY4 packets, check receive packets
+7. Send GTP-U IPv4, GTP-U IPv6 and GTP-U PAY4 packets, check receive packets
from queue 0 and don't have PKT_RX_RSS_HASH print.
--
1.8.3.1
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [dts] [PATCH V1 0/2] dynamic_flowtype: remove a cmd to adapt dpdk
2021-06-02 8:01 [dts] [PATCH V1 0/2] dynamic_flowtype: remove a cmd to adapt dpdk Xiang An
2021-06-02 8:01 ` [dts] [PATCH V1 1/2] test_plans/dynamic_flowtype: " Xiang An
2021-06-02 8:01 ` [dts] [PATCH V1 2/2] tests/dynamic_flowtype: " Xiang An
@ 2021-06-09 7:12 ` Tu, Lijuan
2 siblings, 0 replies; 6+ messages in thread
From: Tu, Lijuan @ 2021-06-09 7:12 UTC (permalink / raw)
To: An, XiangX, dts; +Cc: Lin, Xueqin, An, XiangX
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Xiang An
> Sent: 2021年6月2日 16:02
> To: dts@dpdk.org
> Cc: Lin, Xueqin <xueqin.lin@intel.com>; An, XiangX <xiangx.an@intel.com>
> Subject: [dts] [PATCH V1 0/2] dynamic_flowtype: remove a cmd to adapt dpdk
>
> v1:
> - According to dpdk commit 81db321daeccec0c78bbe8bf4492f18f084ba30f,
> remove command "set_hash_input_set <port_id> <flowtype_id> udp-key
> add" to adapt dpdk, contain testplan and testsuite.
>
> *** BLURB HERE ***
>
> Xiang An (2):
> test_plans/dynamic_flowtype: remove a cmd to adapt dpdk
> tests/dynamic_flowtype: remove a cmd to adapt dpdk
>
> test_plans/dynamic_flowtype_test_plan.rst | 48 +++++++++++--------------------
> tests/TestSuite_dynamic_flowtype.py | 2 --
> 2 files changed, 16 insertions(+), 34 deletions(-)
>
Applied the series.
> --
> 1.8.3.1
^ permalink raw reply [flat|nested] 6+ messages in thread