From: "Lin, Xueqin" <xueqin.lin@intel.com>
To: "Huang, ZhiminX" <zhiminx.huang@intel.com>,
"dts@dpdk.org" <dts@dpdk.org>
Subject: Re: [dts] [PATCH V2 1/4] test_plans/cvl_fdir_test_plan:add esp flow test plan
Date: Wed, 15 Sep 2021 03:27:12 +0000 [thread overview]
Message-ID: <BN7PR11MB2658204878D013F4CC3CF33994DB9@BN7PR11MB2658.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20210914181204.20088-2-zhiminx.huang@intel.com>
> -----Original Message-----
> From: Huang, ZhiminX <zhiminx.huang@intel.com>
> Sent: Wednesday, September 15, 2021 2:12 AM
> To: dts@dpdk.org
> Cc: Lin, Xueqin <xueqin.lin@intel.com>; Huang, ZhiminX
> <zhiminx.huang@intel.com>
> Subject: [dts] [PATCH V2 1/4] test_plans/cvl_fdir_test_plan:add esp flow test
> plan
>
> add 21.08 new feature testplan,this feature support esp flow to match outer
> ip header.
> take ip src/dst and spi for inputset,add 4 new cases in cvl_fdir test plan.
>
> Signed-off-by: Zhimin Huang <zhiminx.huang@intel.com>
Acked-by: Xueqin Lin <xueqin.lin@intel.com>
> ---
> test_plans/cvl_fdir_test_plan.rst | 457 ++++++++++++++++++++++++++++++
> 1 file changed, 457 insertions(+)
>
> diff --git a/test_plans/cvl_fdir_test_plan.rst
> b/test_plans/cvl_fdir_test_plan.rst
> index 9f4cae4a..2ee2154c 100644
> --- a/test_plans/cvl_fdir_test_plan.rst
> +++ b/test_plans/cvl_fdir_test_plan.rst
> @@ -87,6 +87,14 @@ Pattern and input set
> +------------------------------+----------------------------+----------------------------------
> ---------------------------------------------+
> | L2 Ethertype | L2 Ethertype | [Ethertype]
> |
> +------------------------------+----------------------------+----------------------------------
> ---------------------------------------------+
> + | ESP | MAC_IPV4_ESP | [Source IP] [Dest IP] [SPI]
> |
> + +------------------------------+----------------------------+---------------------------------
> ----------------------------------------------+
> + | | MAC_IPV6_ESP | [Source IP] [Dest IP] [SPI]
> |
> + +------------------------------+----------------------------+---------------------------------
> ----------------------------------------------+
> + | | MAC_IPV4_NAT-T-ESP | [Source IP] [Dest IP] [SPI]
> |
> + +------------------------------+----------------------------+---------------------------------
> ----------------------------------------------+
> + | | MAC_IPV6_NAT-T-ESP | [Source IP] [Dest IP] [SPI]
> |
> + +------------------------------+----------------------------+---------------------------------
> ----------------------------------------------+
>
> .. note::
>
> @@ -518,6 +526,55 @@ Send packets
>
> sendp([Ether(dst="00:11:22:33:44:55",type=0x88f7)/"\\x00\\x02"],
> iface="enp134s0f1")
>
> +* MAC_IPV4_ESP
> +
> + matched packets::
> +
> +
> sendp(Ether(dst='00:11:22:33:44:55')/IP(src="192.168.0.20",dst="192.168.0.2
> 1",proto=50)/ESP(spi=7)/Raw('x'*480),iface="enp134s0f1")
> +
> + mismatched packets::
> +
> +
> sendp(Ether(dst='00:11:22:33:44:55')/IP(src="192.168.0.22",dst="192.168.0.2
> 1",proto=50)/ESP(spi=7)/Raw('x'*480),iface="enp134s0f1")
> +
> sendp(Ether(dst='00:11:22:33:44:55')/IP(src="192.168.0.20",dst="192.168.0.1
> 1",proto=50)/ESP(spi=7)/Raw('x'*480),iface="enp134s0f1")
> +
> sendp(Ether(dst='00:11:22:33:44:55')/IP(src="192.168.0.20",dst="192.168.0.2
> 1",proto=50)/ESP(spi=17)/Raw('x'*480),iface="enp134s0f1")
> +
> +* MAC_IPV6_ESP
> +
> + matched packets::
> +
> +
> sendp(Ether(dst='00:11:22:33:44:55')/IPv6(src="2001::1",dst="2001::2",nh=5
> 0)/ESP(spi=7)/Raw('x'*480),iface="enp134s0f1")
> +
> + mismatched packets::
> +
> +
> sendp(Ether(dst='00:11:22:33:44:55')/IPv6(src="2001::8",dst="2001::2",nh=5
> 0)/ESP(spi=7)/Raw('x'*480),iface="enp134s0f1")
> +
> sendp(Ether(dst='00:11:22:33:44:55')/IPv6(src="2001::1",dst="2001::9",nh=5
> 0)/ESP(spi=7)/Raw('x'*480),iface="enp134s0f1")
> +
> sendp(Ether(dst='00:11:22:33:44:55')/IPv6(src="2001::1",dst="2001::2",nh=5
> 0)/ESP(spi=17)/Raw('x'*480),iface="enp134s0f1")
> +
> +* MAC_IPV4_NAT-T-ESP
> +
> + matched packets::
> +
> +
> sendp(Ether(dst='00:11:22:33:44:55')/IP(src="192.168.0.20",dst="192.168.0.2
> 1")/UDP(dport=4500)/ESP(spi=7)/Raw('x'*480),iface="enp134s0f1")
> +
> + mismatched packets::
> +
> +
> sendp(Ether(dst='00:11:22:33:44:55')/IP(src="192.168.0.22",dst="192.168.0.2
> 1")/UDP(dport=4500)/ESP(spi=7)/Raw('x'*480),iface="enp134s0f1")
> +
> sendp(Ether(dst='00:11:22:33:44:55')/IP(src="192.168.0.20",dst="192.168.0.1
> 1")/UDP(dport=4500)/ESP(spi=7)/Raw('x'*480),iface="enp134s0f1")
> +
> sendp(Ether(dst='00:11:22:33:44:55')/IP(src="192.168.0.20",dst="192.168.0.2
> 1")/UDP(dport=4500)/ESP(spi=77)/Raw('x'*480),iface="enp134s0f1")
> +
> +
> +* MAC_IPV6_NAT-T-ESP
> +
> + matched packets::
> +
> +
> sendp(Ether(dst='00:11:22:33:44:55')/IPv6(src="2001::1",dst="2001::2")/UDP(
> dport=4500)/ESP(spi=7)/Raw('x'*480),iface="enp134s0f1")
> +
> + mismatched packets::
> +
> +
> sendp(Ether(dst='00:11:22:33:44:55')/IPv6(src="2001::8",dst="2001::2")/UDP(
> dport=4500)/ESP(spi=7)/Raw('x'*480),iface="enp134s0f1")
> +
> sendp(Ether(dst='00:11:22:33:44:55')/IPv6(src="2001::1",dst="2001::9")/UDP(
> dport=4500)/ESP(spi=7)/Raw('x'*480),iface="enp134s0f1")
> +
> sendp(Ether(dst='00:11:22:33:44:55')/IPv6(src="2001::1",dst="2001::2")/UDP(
> dport=4500)/ESP(spi=77)/Raw('x'*480),iface="enp134s0f1")
> +
> Test case: flow validation
> ==========================
>
> @@ -2924,6 +2981,406 @@ Subcase 7: unsupported Ethertype
>
> the number "2" stands for switch rule, fdir doesn't support IPV4/IPV6
> ethertype.
>
> +Test case: MAC_IPV4_ESP pattern
> +==================================
> +
> +Subcase 1: MAC_IPV4_ESP queue index
> +--------------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> 192.168.0.21 / esp spi is 7 / end actions queue index 13 / mark id 7 / end
> +
> +2. send matched packets, check the packets are distributed to queue 13
> with FDIR matched ID.
> + send mismatched packets, check the packets are not distributed to queue
> 13 without FDIR matched ID.
> +
> +3. verify rules can be listed and destroyed::
> +
> + testpmd> flow list 0
> +
> + check the rule listed.
> + destroy the rule::
> +
> + testpmd> flow destroy 0 rule 0
> +
> +4. verify matched packets are not distributed to queue 13 without FDIR
> matched ID.
> + check there is no rule listed.
> +
> +Subcase 2: MAC_IPV4_ESP rss queues
> +-------------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> 192.168.0.21 / esp spi is 7 / end actions rss queues 1 2 3 4 end / mark id 6 /
> end
> +
> +2. send matched packets, check the packets are distributed to queue 1 or 2
> or 3 or 4 with FDIR matched ID.
> + send mismatched packets, check the packets are not distributed to queue
> 1 or 2 or 3 or 4 without FDIR matched ID.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are not distributed to queue 1 or 2 or 3 or 4
> without FDIR matched ID.
> + check there is no rule listed.
> +
> +Subcase 3: MAC_IPV4_ESP passthru
> +-----------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> 192.168.0.21 / esp spi is 7 / end actions passthru / mark id 1 / end
> +
> +2. send matched packets, check the packets are distributed by RSS with FDIR
> matched ID.
> + send mismatched packets, check the packets are distributed by RSS
> without FDIR matched ID.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are distributed to the same queue without FDIR
> matched ID.
> + check there is no rule listed.
> +
> +Subcase 4: MAC_IPV4_ESP drop
> +-------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> 192.168.0.21 / esp spi is 7 / end actions drop / end
> +
> +2. send matched packets, check the packets are dropped
> + send mismatched packets, check the packets are not dropped.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are not dropped.
> + check there is no rule listed.
> +
> +Subcase 5: MAC_IPV4_ESP mark+rss
> +-----------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> 192.168.0.21 / esp spi is 7 / end actions mark id 2 / rss / end
> +
> +2. send matched packets, check the packets are distributed by RSS with FDIR
> matched ID.
> + send mismatched packets, check the packets are distributed by RSS
> without FDIR matched ID.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are distributed to the same queue without FDIR
> matched ID.
> + check there is no rule listed.
> +
> +Subcase 6: MAC_IPV4_ESP mark
> +-------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> 192.168.0.21 / esp spi is 7 / end actions mark id 15 / end
> +
> +2. send matched packets, check the packets are received with FDIR matched
> ID.
> + send mismatched packets, check the packets are received without FDIR
> matched ID.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are received without FDIR matched ID.
> + check there is no rule listed.
> +
> +Test case: MAC_IPV6_ESP pattern
> +==================================
> +
> +Subcase 1: MAC_IPV6_ESP queue index
> +--------------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv6 src is 2001::1 dst is 2001::2 / esp
> spi is 7 / end actions queue index 13 / mark id 7 / end
> +
> +2. send matched packets, check the packets are distributed to queue 13
> with FDIR matched ID.
> + send mismatched packets, check the packets are not distributed to queue
> 13 without FDIR matched ID.
> +
> +3. verify rules can be listed and destroyed::
> +
> + testpmd> flow list 0
> +
> + check the rule listed.
> + destroy the rule::
> +
> + testpmd> flow destroy 0 rule 0
> +
> +4. verify matched packets are not distributed to queue 13 without FDIR
> matched ID.
> + check there is no rule listed.
> +
> +Subcase 2: MAC_IPV6_ESP rss queues
> +-------------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv6 src is 2001::1 dst is 2001::2 / esp
> spi is 7 / end actions rss queues 1 2 3 4 end / mark id 6 / end
> +
> +2. send matched packets, check the packets are distributed to queue 1 or 2
> or 3 or 4 with FDIR matched ID.
> + send mismatched packets, check the packets are not distributed to queue
> 1 or 2 or 3 or 4 without FDIR matched ID.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are not distributed to queue 1 or 2 or 3 or 4
> without FDIR matched ID.
> + check there is no rule listed.
> +
> +Subcase 3: MAC_IPV6_ESP passthru
> +-----------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv6 src is 2001::1 dst is 2001::2 / esp
> spi is 7 / end actions passthru / mark id 1 / end
> +
> +2. send matched packets, check the packets are distributed by RSS with FDIR
> matched ID.
> + send mismatched packets, check the packets are distributed by RSS
> without FDIR matched ID.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are distributed to the same queue without FDIR
> matched ID=0x0.
> + check there is no rule listed.
> +
> +Subcase 4: MAC_IPV6_ESP drop
> +-------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv6 src is 2001::1 dst is 2001::2 / esp
> spi is 7 / end actions drop / end
> +
> +2. send matched packets, check the packets are dropped
> + send mismatched packets, check the packets are not dropped.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are not dropped.
> + check there is no rule listed.
> +
> +Subcase 5: MAC_IPV6_ESP mark+rss
> +-----------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv6 src is 2001::1 dst is 2001::2 / esp
> spi is 7 / end actions mark id 2 / rss / end
> +
> +2. send matched packets, check the packets are distributed by RSS with FDIR
> matched ID.
> + send mismatched packets, check the packets are distributed by RSS
> without FDIR matched ID.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are distributed to the same queue without FDIR
> matched ID.
> + check there is no rule listed.
> +
> +Subcase 6: MAC_IPV6_ESP mark
> +-------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv6 src is 2001::1 dst is 2001::2 / esp
> spi is 7 / end actions mark id 15 / end
> +
> +2. send matched packets, check the packets are received with FDIR matched
> ID.
> + send mismatched packets, check the packets are received without FDIR
> matched ID.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are received without FDIR matched ID.
> + check there is no rule listed.
> +
> +Test case: MAC_IPV4_NAT-T-ESP pattern
> +========================================
> +
> +Subcase 1: MAC_IPV4_NAT-T-ESP queue index
> +--------------------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> 192.168.0.21 / udp / esp spi is 7 / end actions queue index 13 / mark id 7 /
> end
> +
> +2. send matched packets, check the packets are distributed to queue 13
> with FDIR matched ID.
> + send mismatched packets, check the packets are not distributed to queue
> 13 without FDIR matched ID.
> +
> +3. verify rules can be listed and destroyed::
> +
> + testpmd> flow list 0
> +
> + check the rule listed.
> + destroy the rule::
> +
> + testpmd> flow destroy 0 rule 0
> +
> +4. verify matched packets are not distributed to queue 13 without FDIR
> matched ID.
> + check there is no rule listed.
> +
> +Subcase 2: MAC_IPV4_NAT-T-ESP rss queues
> +-------------------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> 192.168.0.21 / udp / esp spi is 7 / end actions rss queues 1 2 3 4 end / mark
> id 6 / end
> +
> +2. send matched packets, check the packets are distributed to queue 1 or 2
> or 3 or 4 with FDIR matched ID.
> + send mismatched packets, check the packets are not distributed to queue
> 1 or 2 or 3 or 4 without FDIR matched ID.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are not distributed to queue 1 or 2 or 3 or 4
> without FDIR matched ID.
> + check there is no rule listed.
> +
> +Subcase 3: MAC_IPV4_NAT-T-ESP passthru
> +-----------------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> 192.168.0.21 / udp / esp spi is 7 / end actions passthru / mark id 1 / end
> +
> +2. send matched packets, check the packets are distributed by RSS with FDIR
> matched ID.
> + send mismatched packets, check the packets are distributed by RSS
> without FDIR matched ID.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are distributed to the same queue without FDIR
> matched ID.
> + check there is no rule listed.
> +
> +Subcase 4: MAC_IPV4_NAT-T-ESP drop
> +-------------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> 192.168.0.21 / udp / esp spi is 7 / end actions drop / end
> +
> +2. send matched packets, check the packets are dropped
> + send mismatched packets, check the packets are not dropped.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are not dropped.
> + check there is no rule listed.
> +
> +Subcase 5: MAC_IPV4_NAT-T-ESP mark+rss
> +-----------------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> 192.168.0.21 / udp / esp spi is 7 / end actions mark id 2 / rss / end
> +
> +2. send matched packets, check the packets are distributed by RSS with FDIR
> matched ID.
> + send mismatched packets, check the packets are distributed by RSS
> without FDIR matched ID.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are distributed to the same queue without FDIR
> matched ID.
> + check there is no rule listed.
> +
> +Subcase 6: MAC_IPV4_NAT-T-ESP mark
> +-------------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is
> 192.168.0.21 / udp / esp spi is 7 / end actions mark id 15 / end
> +
> +2. send matched packets, check the packets are received with FDIR matched
> ID.
> + send mismatched packets, check the packets are received without FDIR
> matched ID.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are received without FDIR matched ID.
> + check there is no rule listed.
> +
> +Test case: MAC_IPV6_NAT-T-ESP pattern
> +========================================
> +
> +Subcase 1: MAC_IPV6_NAT-T-ESP queue index
> +--------------------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv6 src is 2001::1 dst is 2001::2 / udp /
> esp spi is 7 / end actions queue index 13 / mark id 7 / end
> +
> +2. send matched packets, check the packets are distributed to queue 13
> with FDIR matched ID.
> + send mismatched packets, check the packets are not distributed to queue
> 13 without FDIR matched ID.
> +
> +3. verify rules can be listed and destroyed::
> +
> + testpmd> flow list 0
> +
> + check the rule listed.
> + destroy the rule::
> +
> + testpmd> flow destroy 0 rule 0
> +
> +4. verify matched packets are not distributed to queue 13 without FDIR
> matched ID.
> + check there is no rule listed.
> +
> +Subcase 2: MAC_IPV6_NAT-T-ESP rss queues
> +-------------------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv6 src is 2001::1 dst is 2001::2 / udp /
> esp spi is 7 / end actions rss queues 1 2 3 4 end / mark id 6 / end
> +
> +2. send matched packets, check the packets are distributed to queue 1 or 2
> or 3 or 4 with FDIR matched ID.
> + send mismatched packets, check the packets are not distributed to queue
> 1 or 2 or 3 or 4 without FDIR matched ID.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are not distributed to queue 1 or 2 or 3 or 4
> without FDIR matched ID.
> + check there is no rule listed.
> +
> +Subcase 3: MAC_IPV6_NAT-T-ESP passthru
> +-----------------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv6 src is 2001::1 dst is 2001::2 / udp /
> esp spi is 7 / end actions passthru / mark id 1 / end
> +
> +2. send matched packets, check the packets are distributed by RSS with FDIR
> matched ID.
> + send mismatched packets, check the packets are distributed by RSS
> without FDIR matched ID.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are distributed to the same queue without FDIR
> matched ID.
> + check there is no rule listed.
> +
> +Subcase 4: MAC_IPV6_NAT-T-ESP drop
> +-------------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv6 src is 2001::1 dst is 2001::2 / udp /
> esp spi is 7 / end actions drop / end
> +
> +2. send matched packets, check the packets are dropped
> + send mismatched packets, check the packets are not dropped.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are not dropped.
> + check there is no rule listed.
> +
> +Subcase 5: MAC_IPV6_NAT-T-ESP mark+rss
> +-----------------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv6 src is 2001::1 dst is 2001::2 / udp /
> esp spi is 7 / end actions mark id 2 / rss / end
> +
> +2. send matched packets, check the packets are distributed by RSS with FDIR
> matched ID.
> + send mismatched packets, check the packets are distributed by RSS
> without FDIR matched ID.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are distributed to the same queue without FDIR
> matched ID.
> + check there is no rule listed.
> +
> +Subcase 6: MAC_IPV6_NAT-T-ESP mark
> +-------------------------------------
> +
> +1. create filter rules::
> +
> + flow create 0 ingress pattern eth / ipv6 src is 2001::1 dst is 2001::2 / udp /
> esp spi is 7 / end actions mark id 15 / end
> +
> +2. send matched packets, check the packets are received with FDIR matched
> ID.
> + send mismatched packets, check the packets are received without FDIR
> matched ID.
> +
> +3. repeat step 3 of subcase 1.
> +
> +4. verify matched packets are received without FDIR matched ID.
> + check there is no rule listed.
> +
> Test case: negative cases
> =========================
> Note: the error message may be changed.
> --
> 2.17.1
next prev parent reply other threads:[~2021-09-15 3:27 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-14 18:12 [dts] [PATCH V2 0/4] enable esp flow Zhimin Huang
2021-09-14 18:12 ` [dts] [PATCH V2 1/4] test_plans/cvl_fdir_test_plan:add esp flow test plan Zhimin Huang
2021-09-15 3:27 ` Lin, Xueqin [this message]
2021-09-14 18:12 ` [dts] [PATCH V2 2/4] test_plans/iavf_fdir_test_plan:add " Zhimin Huang
2021-09-15 3:27 ` Lin, Xueqin
2021-09-14 18:12 ` [dts] [PATCH V2 3/4] tests/cvl_fdir:add esp flow test case Zhimin Huang
2021-09-15 3:28 ` Lin, Xueqin
2021-09-14 18:12 ` [dts] [PATCH V2 4/4] tests/iavf_fdir:add " Zhimin Huang
2021-09-15 3:28 ` Lin, Xueqin
2021-09-27 5:20 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BN7PR11MB2658204878D013F4CC3CF33994DB9@BN7PR11MB2658.namprd11.prod.outlook.com \
--to=xueqin.lin@intel.com \
--cc=dts@dpdk.org \
--cc=zhiminx.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).