Hi all,

Hi can anyone explain me why in in DTS 18.02, dut_prerequisites(), it is calling disable_tester_ipv6().

Why is there a need of disabling testers IPV6 support.

While executing testcases it is showing me this:  DUT PORT MAP: [-1, -1], and there is a Index Error exception raised.

File "/root/dts-18.02/framework/dut.py", line 984, in disable_tester_ipv6

    if self.tester.ports_info[tester_port]['type'] != 'ixia':

IndexError: list index out of range

However if I comment out the disable_tester_ipv6() function call, I am able to run some test cases, while some test cases  fail and raise ParameterInvalidException,

File "/root/dts-18.02/framework/tester.py", line 188, in get_interface

    raise ParameterInvalidException("local port should not be -1")

ParameterInvalidException: local port should not be -1

dut.172.28.12.218: echo 0000:af:00.0 > /sys/bus/pci/devices/0000\:af\:00.0/driver/unbind

             dut.172.28.12.218:

             dut.172.28.12.218: modprobe qede

             dut.172.28.12.218:

             dut.172.28.12.218: echo 0000:af:00.0 > /sys/bus/pci/drivers/qede/bind

             dut.172.28.12.218:

             dut.172.28.12.218: ifconfig eth0 up

             dut.172.28.12.218:

             dut.172.28.12.218: echo 0000:af:00.1 > /sys/bus/pci/devices/0000\:af\:00.1/driver/unbind

             dut.172.28.12.218:

             dut.172.28.12.218: modprobe qede

             dut.172.28.12.218:

             dut.172.28.12.218: echo 0000:af:00.1 > /sys/bus/pci/drivers/qede/bind

             dut.172.28.12.218:

             dut.172.28.12.218: ifconfig eth1 up

             dut.172.28.12.218:

             dut.172.28.12.218: ip link show eth0

             dut.172.28.12.218: 33: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000

    link/ether 14:02:ec:ce:ee:24 brd ff:ff:ff:ff:ff:ff

             dut.172.28.12.218: ip -family inet6 address show dev eth0 | awk '/inet6/ { print $2 }'

             dut.172.28.12.218: fe80::1602:ecff:fece:ee24/64

             dut.172.28.12.218: ip -family inet address show dev eth0 | awk '/inet/ { print $2 }'

             dut.172.28.12.218:

             dut.172.28.12.218: ip link show eth1

             dut.172.28.12.218: 34: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN mode DEFAULT qlen 1000

    link/ether 14:02:ec:ce:ee:25 brd ff:ff:ff:ff:ff:ff

             dut.172.28.12.218: ip -family inet6 address show dev eth1 | awk '/inet6/ { print $2 }'

             dut.172.28.12.218: fe80::1602:ecff:fece:ee25/64

             dut.172.28.12.218: ip -family inet address show dev eth1 | awk '/inet/ { print $2 }'

             dut.172.28.12.218:

dut.172.28.12.218: DUT PORT MAP: [-1, -1]

                                        dts:  PREREQ EXCEPTION Traceback (most recent call last):

File "/root/dts-18.02/framework/dts.py", line 341, in dts_run_prerequisties

    dutobj.prerequisites()

  File "/root/dts-18.02/framework/project_dpdk.py", line 327, in prerequisites

    self.dut_prerequisites()

  File "/root/dts-18.02/framework/dut.py", line 216, in dut_prerequisites

    self.disable_tester_ipv6()

  File "/root/dts-18.02/framework/dut.py", line 984, in disable_tester_ipv6

    if self.tester.ports_info[tester_port]['type'] != 'ixia':

IndexError: list index out of range

Regards,

Yash