On Thu, 16 Jul 2020 15:42:36 -0400
Owen Hilyard <ohilyard@iol.unh.edu> wrote:

> Sorry about sending this twice, I noticed after todays meeting that this was caught in the moderator queue and I want to get it out to the mailing list at large asap.
>
> add multicast filtering test case
> add multicast test case test plan
>
> Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
> ---
>  test_plans/mac_filter_test_plan.rst | 27 ++++++++++++++++++++
>  tests/TestSuite_mac_filter.py       | 39 ++++++++++++++++++++++++++---
>  2 files changed, 62 insertions(+), 4 deletions(-)
>
> diff --git a/test_plans/mac_filter_test_plan.rst b/test_plans/mac_filter_test_plan.rst
> index 1335e9f..e8a4f66 100644
> --- a/test_plans/mac_filter_test_plan.rst
> +++ b/test_plans/mac_filter_test_plan.rst
> @@ -172,3 +172,30 @@ Add one more different address::
>     testpmd> mac_addr add 0 <A+n+1> 
> 
>  Verify that the response is "No space left on device" (-ENOSPC)
> +
> +Test Case: Multicast Filter
> +===========================
> +
> +Initialize first port without ``promiscuous mode``::
> +
> +  testpmd> set promisc 0 off
> +
> +
> +Add the multicast MAC address to the multicast filter::
> +
> +   testpmd> mcast_addr add 0 01:00:5E:00:00:00
> +
> +Send a packet with multicast destination MAC address to port 0::
> +
> +   port 0/queue 0: received 1 packets
> +     src=52:00:00:00:00:00 - dst=01:00:5E:00:00:00 - type=0x0800 - length=60 - nb_segs=1 - hw    ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP  - sw ptype: L2_ETHER L3_IPV4 L4_UDP  - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x0
> +     ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
> +
> +
> +Remove the multicast MAC address from the multicast filter::
> +
> +   testpmd> mcast_addr remove 0 01:00:5E:00:00:00
> +
> +Send a packet with multicast destination MAC address to port 0
> +
> +Verify that the packet was not received (Check for "received" in the output). There will be no output if the nic responds properly.
> \ No newline at end of file

Ok, but you must fix this.

Please set your editor so it generates text files that always have a newline at the end.
Although git supports files without ending newline, it is not something we want in this project.