From: Owen Hilyard <ohilyard@iol.unh.edu>
brcm_57414 and brcm_P2100G are not currently in the settings files for
DTS. This causes errors when DTS is run with these nics. The community
lab was running a patched version of DTS, but we are making an effort to
more closely align to upstream. Since these nics are used in CI for
DPDK, they are well tested with DTS and shouldn't cause any issues.
Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
---
conf/nic_single_core_perf.cfg | 8 +++++++-
framework/settings.py | 8 ++++++--
2 files changed, 13 insertions(+), 3 deletions(-)
diff --git a/conf/nic_single_core_perf.cfg b/conf/nic_single_core_perf.cfg
index 7970995e..4a1073f5 100644
--- a/conf/nic_single_core_perf.cfg
+++ b/conf/nic_single_core_perf.cfg
@@ -72,4 +72,10 @@ expected_throughput = {
'1C/2T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}}}},
'ConnectX5_MT4121': {
'1C/1T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}},
- '1C/2T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}}}}
+ '1C/2T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}}},
+ 'brcm_57414': {
+ '1C/1T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}},
+ '1C/2T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}}},
+ 'brcm_P2100G': {
+ '1C/1T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}},
+ '1C/2T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}}}}
\ No newline at end of file
diff --git a/framework/settings.py b/framework/settings.py
index 9ceffe2e..fe7c01b5 100644
--- a/framework/settings.py
+++ b/framework/settings.py
@@ -110,7 +110,9 @@ NICS = {
'fastlinq_ql41000_vf': '1077:8090',
'carlsville': '8086:15ff',
'hi1822': '19e5:1822',
- 'foxville': '8086:15f2'
+ 'foxville': '8086:15f2',
+ 'brcm_57414': '14e4:16d7',
+ 'brcm_P2100G': '14e4:1750'
}
DRIVERS = {
@@ -174,7 +176,9 @@ DRIVERS = {
'fastlinq_ql41000_vf': 'qede',
'carlsville': 'i40e',
'hi1822': 'hinic',
- 'foxville':'igc'
+ 'foxville':'igc',
+ 'brcm_57414': 'bnxt_en',
+ 'brcm_P2100G': 'bnxt_en'
}
"""
--
2.30.2