* [dts] [PATCH v2] tests: add new suite
@ 2021-04-08 14:25 Hailin Xu
2021-04-08 6:55 ` Xu, HailinX
2021-04-08 7:00 ` Xu, HailinX
0 siblings, 2 replies; 5+ messages in thread
From: Hailin Xu @ 2021-04-08 14:25 UTC (permalink / raw)
To: dts; +Cc: qi.fu, Hailin Xu
add cvl_qinq suite
Signed-off-by: Hailin Xu <hailinx.xu@intel.com>
---
v1: add cvl_qinq suite
v2: fix format issue and spelling issue
tests/TestSuite_cvl_qinq.py | 872 ++++++++++++++++++++++++++++++++++++
1 file changed, 872 insertions(+)
create mode 100644 tests/TestSuite_cvl_qinq.py
diff --git a/tests/TestSuite_cvl_qinq.py b/tests/TestSuite_cvl_qinq.py
new file mode 100644
index 00000000..1160b0cd
--- /dev/null
+++ b/tests/TestSuite_cvl_qinq.py
@@ -0,0 +1,872 @@
+# BSD LICENSE
+#
+# Copyright(c) 2021 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+import re
+import time
+import random
+from packet import Packet
+from pmd_output import PmdOutput
+from test_case import TestCase, check_supported_nic
+from utils import GREEN, RED
+from rte_flow_common import RssProcessing
+
+mac_qinq_ipv4_pay_src_ip = {
+ 'name': 'mac_qinq_ipv4_pay_src_ip',
+ 'rule': 'flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv4 src is 196.222.232.221 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="196.222.232.221")/("X"*480)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="196.222.232.222")/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(dst="196.222.232.221")/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="196.222.232.221")/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)']},
+ 'check_param': {'port_id':1}
+}
+
+mac_qinq_ipv4_pay_dst_ip = {
+ 'name': 'mac_qinq_ipv4_pay_dst_ip',
+ 'rule': 'flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv4 dst is 196.222.232.221 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(dst="196.222.232.221")/("X"*480)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(dst="196.222.232.222")/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="196.222.232.221")/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(dst="196.222.232.221")/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IP(dst="196.222.232.221")/("X"*480)']},
+ 'check_param': {'port_id':1}
+}
+
+mac_qinq_ipv4_pay_dest_mac = {
+ 'name': 'mac_qinq_ipv4_pay_dest_mac',
+ 'rule': 'flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/("X"*480)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IP()/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IPv6()/("X"*480)']},
+ 'check_param': {'port_id':1}
+}
+
+mac_qinq_ipv4_pay = [mac_qinq_ipv4_pay_src_ip, mac_qinq_ipv4_pay_dst_ip, mac_qinq_ipv4_pay_dest_mac]
+
+mac_qinq_ipv6_pay_src_ip = {
+ 'name': 'mac_qinq_ipv6_pay_src_ip',
+ 'rule': 'flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888")/("X"*480)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(src="1111:2222:3333:4444:5555:6666:7777:9999")/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888")/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888")/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x86DD)/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888")/("X"*480)']},
+ 'check_param': {'port_id': 1}
+}
+
+mac_qinq_ipv6_pay_dst_ip = {
+ 'name': 'mac_qinq_ipv6_pay_dst_ip',
+ 'rule': 'flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888")/("X"*480)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:9999")/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888")/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888")/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x86DD)/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888")/("X"*480)']},
+ 'check_param': {'port_id': 1}
+}
+
+mac_qinq_ipv6_pay_dest_mac = {
+ 'name': 'mac_qinq_ipv6_pay_dest_mac',
+ 'rule': 'flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6()/("X"*480)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6()/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6()/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x86DD)/IPv6()/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IP()/("X"*480)']},
+ 'check_param': {'port_id': 1}
+}
+
+mac_qinq_ipv6_pay = [mac_qinq_ipv6_pay_src_ip, mac_qinq_ipv6_pay_dst_ip, mac_qinq_ipv6_pay_dest_mac]
+
+mac_qinq_pppoe_pay = [{
+ 'name': 'mac_qinq_pppoe_pay',
+ 'rule': 'flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/("X"*480)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x2)/PPP(proto=0x57)/IPv6()/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x2)/PPP(proto=0x21)/IP()/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/("X"*480)']},
+ 'check_param': {'port_id': 1}
+}]
+
+mac_qinq_pppoe_proto = [{
+ 'name': 'mac_qinq_pppoe_proto',
+ 'rule': 'flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / pppoe_proto_id is 0x0057 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x2)/PPP(proto=0x57)/IPv6()/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/("X"*480)']},
+ 'check_param': {'port_id': 1}
+}]
+
+mac_qinq_pppoe_ipv4_src_ip = {
+ 'name': 'mac_qinq_pppoe_ipv4_src_ip',
+ 'rule': 'flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 src is 196.222.232.221 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP(src="196.222.232.221")/UDP(dport=23)/("X"*480)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP(src="196.222.232.222")/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP(dst="196.222.232.221")/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x2)/PPP(proto=0x21)/IP(src="196.222.232.221")/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP(src="196.222.232.221")/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP(src="196.222.232.221")/UDP(dport=23)/("X"*480)']},
+ 'check_param': {'port_id': 1}
+}
+
+mac_qinq_pppoe_ipv4_dst_ip = {
+ 'name': 'mac_qinq_pppoe_ipv4_dst_ip',
+ 'rule': 'flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 dst is 196.222.232.221 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP(dst="196.222.232.221")/UDP(dport=23)/("X"*480)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP(dst="196.222.232.222")/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP(src="196.222.232.221")/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x2)/PPP(proto=0x21)/IP(dst="196.222.232.221")/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP(dst="196.222.232.221")/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP(dst="196.222.232.221")/UDP(dport=23)/("X"*480)']},
+ 'check_param': {'port_id': 1}
+}
+
+mac_qinq_pppoe_ipv4_dest_mac = {
+ 'name': 'mac_qinq_pppoe_ipv4_dest_mac',
+ 'rule': 'flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/UDP(dport=23)/("X"*480)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x2)/PPP(proto=0x21)/IP()/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IPv6()/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x21)/IP()/UDP(dport=23)/("X"*480)']},
+ 'check_param': {'port_id': 1}
+}
+
+mac_qinq_pppoe_ipv4 = [mac_qinq_pppoe_ipv4_src_ip, mac_qinq_pppoe_ipv4_dst_ip, mac_qinq_pppoe_ipv4_dest_mac]
+
+mac_qinq_pppoe_ipv6_src_ip = {
+ 'name': 'mac_qinq_pppoe_ipv6_src_ip',
+ 'rule': 'flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=23)/("X"*480)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6(src="1111:2222:3333:4444:5555:6666:7777:9999")/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x2)/PPP(proto=0x57)/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=23)/("X"*480)']},
+ 'check_param': {'port_id': 1}
+}
+
+mac_qinq_pppoe_ipv6_dst_ip = {
+ 'name': 'mac_qinq_pppoe_ipv6_dst_ip',
+ 'rule': 'flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=23)/("X"*480)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:9999")/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x2)/PPP(proto=0x57)/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=23)/("X"*480)']},
+ 'check_param': {'port_id': 1}
+}
+
+mac_qinq_pppoe_ipv6_dest_mac = {
+ 'name': 'mac_qinq_pppoe_ipv6_dest_mac',
+ 'rule': 'flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 / end actions vf id 1 / end',
+ 'scapy_str': {'matched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/UDP(dport=23)/("X"*480)'],
+ 'mismatched': ['Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x2)/PPP(proto=0x57)/IPv6()/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IP()/UDP(dport=23)/("X"*480)',
+ 'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(proto=0x57)/IPv6()/UDP(dport=23)/("X"*480)']},
+ 'check_param': {'port_id': 1}
+}
+
+mac_qinq_pppoe_ipv6 = [mac_qinq_pppoe_ipv6_src_ip, mac_qinq_pppoe_ipv6_dst_ip, mac_qinq_pppoe_ipv6_dest_mac]
+
+
+class TestCvlQinq(TestCase):
+
+ @check_supported_nic(["columbiaville_25g", "columbiaville_100g", "columbiaville_25gx2"])
+ def set_up_all(self):
+ '''
+ Run at the start of each test suite.
+ prerequisites.
+ '''
+ # Based on h/w type, choose how many ports to use
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.verify(len(self.dut_ports) >= 1, 'Insufficient ports for testing')
+ # Verify that enough threads are available
+ cores = self.dut.get_core_list('1S/4C/1T')
+ self.verify(cores is not None, 'Insufficient cores for speed testing')
+ self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
+ self.tester_port0 = self.tester.get_local_port(self.dut_ports[0])
+ self.tester_port1 = self.tester.get_local_port(self.dut_ports[1])
+ self.tester_iface0 = self.tester.get_interface(self.tester_port0)
+ self.tester_iface1 = self.tester.get_interface(self.tester_port1)
+
+ self.used_dut_port = self.dut_ports[0]
+ self.pf_interface = self.dut.ports_info[self.dut_ports[0]]['intf']
+ port = self.dut.ports_info[0]['port']
+ port.bind_driver()
+
+ self.vf_flag = False
+ self.vf0_mac = ''
+ self.vf1_mac = '00:11:22:33:44:11'
+ self.vf2_mac = '00:11:22:33:44:22'
+ self.vf3_mac = '00:11:22:33:44:33'
+ self.path = self.dut.apps_name['test-pmd']
+ self.pkt = Packet()
+ self.pmd_output = PmdOutput(self.dut)
+
+ def set_up(self):
+ '''
+ Run before each test case.
+ '''
+ self.pci_list = []
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable on' % self.pf_interface, "#")
+
+ def setup_pf_vfs_env(self, vfs_num=4):
+
+ if self.vf_flag is False:
+ self.dut.generate_sriov_vfs_by_port(self.used_dut_port, vfs_num, driver=self.kdriver)
+ self.sriov_vfs_port = self.dut.ports_info[self.used_dut_port]['vfs_port']
+ self.vf_flag = True
+ if vfs_num > 1:
+ self.dut.send_expect('ip link set %s vf 0 trust on' % (self.pf_interface), '# ')
+ self.dut.send_expect('ip link set %s vf 1 mac %s' % (self.pf_interface, self.vf1_mac), '# ')
+ self.dut.send_expect('ip link set %s vf 2 mac %s' % (self.pf_interface, self.vf2_mac), '# ')
+ self.dut.send_expect('ip link set %s vf 3 mac %s' % (self.pf_interface, self.vf3_mac), '# ')
+ else:
+ self.dut.send_expect('ip link set %s vf 0 mac %s' % (self.pf_interface, self.vf1_mac), '# ')
+
+ try:
+ for port in self.sriov_vfs_port:
+ port.bind_driver(self.drivername)
+ self.pci_list.append(port.pci)
+
+ self.vf0_prop = {'opt_host': self.sriov_vfs_port[0].pci}
+ self.dut.send_expect('ifconfig %s up' % self.pf_interface, '# ')
+ self.dut.send_expect('ip link set dev %s vf 0 spoofchk off' % self.pf_interface, '# ')
+ if vfs_num == 4:
+ self.dut.send_expect('ip link set dev %s vf 1 spoofchk off' % self.pf_interface, '# ')
+ self.dut.send_expect('ip link set dev %s vf 2 spoofchk off' % self.pf_interface, '# ')
+ self.dut.send_expect('ip link set dev %s vf 3 spoofchk off' % self.pf_interface, '# ')
+ except Exception as e:
+ self.destroy_iavf()
+ raise Exception(e)
+
+ def destroy_iavf(self):
+ if self.vf_flag is True:
+ self.dut.destroy_sriov_vfs_by_port(self.used_dut_port)
+ self.vf_flag = False
+
+ def launch_testpmd(self, vfs_num=4, dcf_param=False):
+ if dcf_param:
+ port_options = {self.pci_list[0]: 'cap=dcf,representor=[1]'}
+ else:
+ port_options = {self.pci_list[0]: 'cap=dcf'}
+ if vfs_num > 1:
+ param = ' '
+ self.pmd_output.start_testpmd(cores='1S/4C/1T', param=param,
+ ports=self.pci_list, socket=self.ports_socket, port_options=port_options)
+ else:
+ param = '--rxq=16 --txq=16'
+ self.pmd_output.start_testpmd(cores='1S/4C/1T', param=param,
+ ports=self.pci_list, socket=self.ports_socket)
+ self.confing_testpmd(vfs_num, dcf_param)
+
+ def confing_testpmd(self, vfs_num, dcf_param):
+ driver_type = 'Device name.*?%s.*?\n(.*)' % self.sriov_vfs_port[0].pci
+ if dcf_param or vfs_num == 1:
+ flow_type = 'mac'
+ if vfs_num > 1:
+ output = self.pmd_output.execute_cmd('show port info all')
+ out = re.findall(driver_type, output)
+ self.verify(len(out) == 2, "port0 and port1 driver not is net_ice_dcf")
+ else:
+ flow_type = 'rxonly'
+ output = self.pmd_output.execute_cmd('show port info 0')
+ out = re.findall(driver_type, output)
+ self.verify(len(out) == 1, "vf0 driver not is net_ice_dcf")
+ self.pmd_output.execute_cmd('set fwd %s' % flow_type)
+ self.pmd_output.execute_cmd('set verbose 1')
+ self.pmd_output.execute_cmd('start')
+
+ def create_switch_rule(self, rule, session_name="", check_stats=True):
+ if session_name == "":
+ session_name = self.pmd_output
+ p = re.compile(r"Flow rule #(\d+) created")
+ rule_list = []
+ if isinstance(rule, list):
+ for rule in rule:
+ out = session_name.execute_cmd(rule) #create a rule
+ m = p.search(out)
+ if m:
+ rule_list.append(m.group(1))
+ else:
+ rule_list.append(False)
+ else:
+ out = session_name.execute_cmd(rule) #create a rule
+ m = p.search(out)
+ if m:
+ rule_list.append(m.group(1))
+ else:
+ rule_list.append(False)
+ if check_stats:
+ self.verify(all(rule_list), "some rules not created successfully, result %s, rule %s" % (rule_list, rule))
+ else:
+ self.verify(not any(rule_list), "all rules should create failed, result %s" % rule_list)
+ return rule_list
+
+ def check_switch_rule(self, port_id=0, stats=True, rule_list=None):
+ out = self.pmd_output.execute_cmd("flow list %s" % port_id)
+ p = re.compile(r"ID\s+Group\s+Prio\s+Attr\s+Rule")
+ matched = p.search(out)
+ if stats:
+ self.verify(matched, "flow rule on port %s is not existed" % port_id)
+ if rule_list:
+ p = re.compile("^(\d+)\s")
+ li = out.splitlines()
+ res = list(filter(bool, list(map(p.match, li))))
+ result = [i.group(1) for i in res]
+ self.verify(sorted(result) == sorted(rule_list),
+ "check rule list failed. expect %s, result %s" % (rule_list, result))
+ else:
+ self.verify(not matched, "flow rule on port %s is existed" % port_id)
+
+ def destroy_switch_rule(self, port_id=0, rule_id=None):
+ if rule_id is None:
+ rule_id = 0
+ if isinstance(rule_id, list):
+ for i in rule_id:
+ out = self.dut.send_command("flow destroy %s rule %s" % (port_id, i), timeout=1)
+ p = re.compile(r"Flow rule #(\d+) destroyed")
+ m = p.search(out)
+ self.verify(m, "flow rule %s delete failed" % rule_id)
+ else:
+ out = self.dut.send_command("flow destroy %s rule %s" % (port_id, rule_id), timeout=1)
+ p = re.compile(r"Flow rule #(\d+) destroyed")
+ m = p.search(out)
+ self.verify(m, "flow rule %s delete failed" % rule_id)
+ self.check_switch_rule(stats=False)
+
+ def send_packets(self, pkts, tx_port=None, count=1):
+ self.pkt.update_pkt(pkts)
+ tx_port = self.tester_iface0 if not tx_port else tx_port
+ self.pkt.send_pkt(crb=self.tester, tx_port=tx_port, count=count)
+
+ def send_pkts_getouput(self, pkts, port_id=0, count=1):
+ tx_port = self.tester_iface0 if port_id == 0 else self.tester_iface1
+ self.send_packets(pkts, tx_port=tx_port, count=count)
+ time.sleep(0.5)
+ out = self.pmd_output.get_output()
+ port_stats = self.pmd_output.execute_cmd("show port stats all")
+ self.pmd_output.execute_cmd("clear port stats all")
+ self.pmd_output.execute_cmd("stop")
+ self.pmd_output.execute_cmd("start")
+ return out + port_stats
+
+ def check_packets(self, out, port_id, pkt_num=1, check_stats=True):
+ p = 'port (\d+)/queue.*'
+ result_list = re.findall(p, out)
+ if check_stats:
+ self.verify(len(result_list) == pkt_num, "received packets mismatch".format(port_id))
+ for res in result_list:
+ if check_stats:
+ self.verify(int(res) == port_id, "port {} did not received the packets".format(port_id))
+ else:
+ self.verify(int(res) != port_id, "port {} should not received a packets".format(port_id))
+
+ def _rte_flow_validate_pattern(self, test_vector):
+ test_results = {}
+ for test in test_vector:
+ self.logger.info((GREEN("========test subcase: %s========" % test["name"])))
+ try:
+ port_id = test['check_param']['port_id']
+ rule_list = self.create_switch_rule(test['rule'])
+ self.check_switch_rule()
+ # send matched packets and check
+ matched_packets = test['scapy_str']['matched']
+ out = self.send_pkts_getouput(matched_packets)
+ self.check_packets(out, port_id, len(matched_packets))
+ # send mismatched packets and check
+ mismatched_packets = test['scapy_str']['mismatched']
+ out = self.send_pkts_getouput(mismatched_packets)
+ self.check_packets(out, port_id, len(mismatched_packets), check_stats=False)
+ self.destroy_switch_rule()
+ out = self.send_pkts_getouput(matched_packets)
+ self.check_packets(out, port_id, len(matched_packets), check_stats=False)
+ test_results[test["name"]] = True
+ self.logger.info((GREEN("subcase passed: %s" % test["name"])))
+ except Exception as e:
+ self.logger.warning((RED(e)))
+ self.dut.send_command("flow flush 0", timeout=1)
+ self.dut.send_command("flow flush 1", timeout=1)
+ test_results[test["name"]] = False
+ self.logger.info((RED("subcase failed: %s" % test["name"])))
+ continue
+ failed_cases = []
+ for k, v in list(test_results.items()):
+ if not v:
+ failed_cases.append(k)
+ self.verify(all(test_results.values()), "{} failed.".format(failed_cases))
+
+ def start_tcpdump(self, rxItf):
+ self.tester.send_expect("rm -rf getPackageByTcpdump.cap", "#")
+ self.tester.send_expect("tcpdump -A -nn -e -vv -w getPackageByTcpdump.cap -i %s 2> /dev/null& " % rxItf, "#")
+ time.sleep(2)
+
+ def get_tcpdump_package(self):
+ time.sleep(1)
+ self.tester.send_expect("killall tcpdump", "#")
+ return self.tester.send_expect("tcpdump -A -nn -e -vv -r getPackageByTcpdump.cap", "#")
+
+ def test_mac_qinq_ipv4_pay(self):
+ """
+ DCF switch for MAC_QINQ_IPV4_PAY
+ """
+ self.setup_pf_vfs_env()
+ self.launch_testpmd()
+ self._rte_flow_validate_pattern(mac_qinq_ipv4_pay)
+
+ def test_mac_qinq_ipv6_pay(self):
+ """
+ DCF switch for MAC_QINQ_IPV6_PAY
+ """
+ self.setup_pf_vfs_env()
+ self.launch_testpmd()
+ self._rte_flow_validate_pattern(mac_qinq_ipv6_pay)
+
+ def test_mac_qinq_pppoe_pay(self):
+ """
+ DCF switch for MAC_QINQ_PPPOE_PAY
+ """
+ self.setup_pf_vfs_env()
+ self.launch_testpmd()
+ self._rte_flow_validate_pattern(mac_qinq_pppoe_pay)
+
+ def test_mac_qinq_pppoe_pay_proto(self):
+ """
+ DCF switch for MAC_QINQ_PPPOE_PAY_Proto
+ """
+ self.setup_pf_vfs_env()
+ self.launch_testpmd()
+ self._rte_flow_validate_pattern(mac_qinq_pppoe_proto)
+
+ def test_mac_qinq_pppoe_ipv4(self):
+ """
+ DCF switch for MAC_QINQ_PPPOE_IPV4
+ """
+ self.setup_pf_vfs_env()
+ self.launch_testpmd()
+ self._rte_flow_validate_pattern(mac_qinq_pppoe_ipv4)
+
+ def test_mac_qinq_pppoe_ipv6(self):
+ """
+ DCF switch for MAC_QINQ_PPPOE_IPV6
+ """
+ self.setup_pf_vfs_env()
+ self.launch_testpmd()
+ self._rte_flow_validate_pattern(mac_qinq_pppoe_ipv6)
+
+ def reset_vf(self):
+ self.pmd_output.execute_cmd("port stop 2")
+ self.pmd_output.execute_cmd("port reset 2")
+ self.pmd_output.execute_cmd("port start 2")
+ self.pmd_output.execute_cmd("start")
+
+ def send_packet_check_vlan_strip(self, pkts, outer=False, inner=False):
+ for pkt in pkts:
+ pkt_index = pkts.index(pkt)
+ self.start_tcpdump(self.tester_iface0)
+ out = self.send_pkts_getouput(pkt)
+ self.check_packets(out, 2, pkt_num=1)
+ tcpdump_out = self.get_tcpdump_package()
+ vlan_list = re.findall("vlan \d+", tcpdump_out)
+ if pkt_index == 1:
+ vlan_num = 2
+ if outer or inner:
+ vlan_num -= 1
+ self.verify(len(vlan_list) == vlan_num, "received outer vlan packet!!!")
+ else:
+ vlan_num = 4
+ if inner and outer:
+ vlan_num -= 2
+ elif outer:
+ vlan_num -= 1
+ self.verify(len(vlan_list) == vlan_num, "received outer vlan packet error!!!")
+
+ def test_vlan_strip_in_pvid_enable(self):
+ """
+ vlan strip when pvid enable
+ """
+ pkts = ['Ether(dst="%s",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac,
+ 'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=21,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
+ self.setup_pf_vfs_env()
+ self.launch_testpmd(dcf_param=True)
+ self.pmd_output.execute_cmd("stop")
+ self.pmd_output.execute_cmd("vlan set strip on 1")
+ self.reset_vf()
+ self.send_packet_check_vlan_strip(pkts, outer=True)
+ self.pmd_output.execute_cmd("stop")
+ self.pmd_output.execute_cmd("vlan set strip off 1")
+ self.reset_vf()
+ self.send_packet_check_vlan_strip(pkts)
+ self.pmd_output.execute_cmd("stop")
+ self.pmd_output.execute_cmd("vlan set strip on 1")
+ self.reset_vf()
+ self.pmd_output.execute_cmd("vlan set strip on 2")
+ self.send_packet_check_vlan_strip(pkts, outer=True, inner=True)
+ self.pmd_output.execute_cmd("quit", "#")
+ self.launch_testpmd(dcf_param=True)
+ self.pmd_output.execute_cmd("stop")
+ self.pmd_output.execute_cmd("vlan set strip on 2")
+ self.pmd_output.execute_cmd("vlan set strip on 1")
+ self.reset_vf()
+ self.send_packet_check_vlan_strip(pkts, outer=True, inner=True)
+
+ def _send_packet_check_vlan_inter(self, pkts, out_vlan, port_id=3, vlan_header=None, iner_vlan=None):
+ for pkt in pkts:
+ pkt_index = pkts.index(pkt)
+ self.start_tcpdump(self.tester_iface0)
+ out = self.send_pkts_getouput(pkt)
+ self.check_packets(out, port_id)
+ p = "vlan (\d+)"
+ tcpdump_out = self.get_tcpdump_package()
+ vlan_list = re.findall(p, tcpdump_out)
+ if vlan_header:
+ header = re.findall(vlan_header, tcpdump_out)
+ if pkt_index == 0:
+ if out_vlan == 1:
+ self.verify(len(vlan_list) == 1, "received packet outer vlan not is %s" % out_vlan)
+ elif out_vlan == 0:
+ self.verify(len(vlan_list) == 0, "received packet outer vlan not is %s" % out_vlan)
+ else:
+ self.verify(int(vlan_list[0]) == out_vlan, "received packet outer vlan not is %s" % out_vlan)
+ if iner_vlan:
+ self.verify(int(vlan_list[1]) == iner_vlan, "received packet outer vlan not is %s" % iner_vlan)
+ else:
+ if out_vlan == 1:
+ self.verify(len(vlan_list) == 3 and int(vlan_list[1]) == out_vlan, "received packet outer vlan not is %s" % out_vlan)
+ elif out_vlan == 0:
+ self.verify(len(vlan_list) == 2, "received packet outer vlan not is %s" % out_vlan)
+ else:
+ self.verify(int(vlan_list[1]) == out_vlan, "received packet outer vlan not is %s" % out_vlan)
+ if iner_vlan:
+ self.verify(int(vlan_list[2]) == iner_vlan, "received packet outer vlan not is %s" % iner_vlan)
+ if vlan_header == "0x8100":
+ self.verify(vlan_header in tcpdump_out, "vlan header not matched, expect: %s." % vlan_header)
+ elif vlan_header is None:
+ pass
+ else:
+ self.verify(len(header) == 1, "vlan header not matched, expect: %s." % vlan_header)
+
+ def test_vlan_insert_in_pvid_enable(self):
+ """
+ vlan insertion when pvid enable
+ """
+ out_vlan = 24
+ iner_vlan = 11
+ header = "0x8100"
+ pkt_list = ['Ether(dst="%s",type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf2_mac,
+ 'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=1,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf2_mac]
+ self.setup_pf_vfs_env()
+ self.launch_testpmd(dcf_param=True)
+ self.pmd_output.execute_cmd("stop")
+ self.pmd_output.execute_cmd("tx_vlan set pvid 1 %d on" % out_vlan)
+ self.reset_vf()
+ self._send_packet_check_vlan_inter(pkt_list, out_vlan, vlan_header=header)
+ header = "0x88a8"
+ self.pmd_output.execute_cmd("stop")
+ self.pmd_output.execute_cmd("vlan set outer tpid %s 1" % header)
+ self.reset_vf()
+ self._send_packet_check_vlan_inter(pkt_list, out_vlan, vlan_header=header)
+ header = "0x9100"
+ self.pmd_output.execute_cmd("stop")
+ self.pmd_output.execute_cmd("vlan set outer tpid %s 1" % header)
+ self.reset_vf()
+ self._send_packet_check_vlan_inter(pkt_list, out_vlan, vlan_header=header)
+ self.pmd_output.execute_cmd("stop")
+ self.pmd_output.execute_cmd("port stop 2")
+ self.pmd_output.execute_cmd("tx_vlan set 2 %d" % iner_vlan)
+ self.pmd_output.execute_cmd("port start 2")
+ self.pmd_output.execute_cmd("start")
+ self._send_packet_check_vlan_inter(pkt_list, out_vlan, vlan_header=header, iner_vlan=iner_vlan)
+ self.pmd_output.execute_cmd("quit", "# ")
+ self.launch_testpmd(dcf_param=True)
+ self.pmd_output.execute_cmd("stop")
+ self.pmd_output.execute_cmd("port stop 2")
+ self.pmd_output.execute_cmd("tx_vlan set 2 %d" % iner_vlan)
+ self.pmd_output.execute_cmd("port start 2")
+ self.pmd_output.execute_cmd("tx_vlan set pvid 1 %d on" % out_vlan)
+ self.reset_vf()
+ self._send_packet_check_vlan_inter(pkt_list, out_vlan, port_id=3, vlan_header=header, iner_vlan=iner_vlan)
+
+ def test_vlan_filter_in_pvid_enable(self):
+ """
+ vlan filter when pvid enable
+ """
+ pkt_list1 = ['Ether(dst="%s",type=0x8100)/Dot1Q(vlan=11,type=0x8100)/Dot1Q(vlan=2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac,
+ 'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=11,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
+ pkt_list2 = ['Ether(dst="%s",type=0x8100)/Dot1Q(vlan=21,type=0x8100)/Dot1Q(vlan=2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac,
+ 'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=21,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
+ self.setup_pf_vfs_env()
+ self.launch_testpmd(dcf_param=True)
+ self.pmd_output.execute_cmd("vlan set filter on 1")
+ out = self.pmd_output.execute_cmd("rx_vlan add 11 1")
+ self.verify("failed" in out, "add rx_vlan successfully for VF1 by representor")
+ self.pmd_output.execute_cmd("vlan set filter on 2")
+ self.pmd_output.execute_cmd("rx_vlan add 11 2")
+ for pkt in pkt_list1:
+ out = self.send_pkts_getouput(pkt)
+ self.check_packets(out, 2)
+ for pkt in pkt_list2:
+ out = self.send_pkts_getouput(pkt)
+ self.check_packets(out, 2, pkt_num=0, check_stats=False)
+ self.pmd_output.execute_cmd("rx_vlan rm 11 2")
+ for pkt in pkt_list1:
+ out = self.send_pkts_getouput(pkt)
+ self.check_packets(out, 2, pkt_num=0, check_stats=False)
+
+ def check_vlan_offload(self, vlan_type, stats):
+ p = "VLAN offload.*\n.*?%s (\w+)" % vlan_type
+ out = self.pmd_output.execute_cmd("show port info 0")
+ vlan_stats = re.search(p, out).group(1)
+ self.verify(vlan_stats == stats, "VLAN stats mismatch")
+
+ def test_enable_disable_iavf_vlan_filter(self):
+ """
+ Enable/Disable IAVF VLAN filtering
+ """
+ pkt_list1 = ['Ether(dst="%s",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac,
+ 'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=1,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
+ pkt_list2 = ['Ether(dst="%s",type=0x8100)/Dot1Q(vlan=11,type=0x8100)/Dot1Q(vlan=2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac,
+ 'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=11,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
+ self.setup_pf_vfs_env(vfs_num=1)
+ self.launch_testpmd(vfs_num=1)
+ self.pmd_output.execute_cmd("vlan set filter on 0")
+ self.check_vlan_offload(vlan_type="filter", stats="on")
+ out = self.send_pkts_getouput(pkt_list1)
+ receive_pkt = re.findall('dst=%s' % self.vf1_mac, out)
+ self.verify(len(receive_pkt) == 0, 'Failed error received vlan packet!')
+
+ self.pmd_output.execute_cmd("rx_vlan add 1 0")
+ self.start_tcpdump(self.tester_iface0)
+ out = self.send_pkts_getouput(pkt_list1)
+ tcpdump_out = self.get_tcpdump_package()
+ receive_pkt = re.findall("dst=%s" % self.vf1_mac, out)
+ self.verify(len(receive_pkt) == 2, "Failed error received vlan packet!")
+ tester_pkt = re.findall("vlan \d+", tcpdump_out)
+ self.verify(len(tester_pkt) == 6, "Failed pass received vlan packet!")
+
+ out = self.send_pkts_getouput(pkt_list2)
+ receive_pkt = re.findall('dst=%s' % self.vf1_mac, out)
+ self.verify(len(receive_pkt) == 0, 'Failed error received vlan packet!')
+
+ self.pmd_output.execute_cmd("rx_vlan rm 1 0")
+ out = self.send_pkts_getouput(pkt_list1)
+ receive_pkt = re.findall('dst=%s' % self.vf1_mac, out)
+ self.verify(len(receive_pkt) == 0, 'Failed error received vlan packet!')
+
+ def test_enable_disable_iavf_vlan_strip(self):
+ """
+ Enable/Disable IAVF VLAN header stripping
+ """
+ pkt_list = ['Ether(dst="%s",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac,
+ 'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=1,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
+ self.setup_pf_vfs_env(vfs_num=1)
+ self.launch_testpmd(vfs_num=1)
+ self.pmd_output.execute_cmd("vlan set filter on 0")
+ self.pmd_output.execute_cmd("rx_vlan add 1 0")
+ self.check_vlan_offload(vlan_type="filter", stats="on")
+ self.pmd_output.execute_cmd("vlan set strip on 0")
+ self.check_vlan_offload(vlan_type="strip", stats="on")
+
+ self.start_tcpdump(self.tester_iface0)
+ out = self.send_pkts_getouput(pkt_list)
+ tcpdump_out = self.get_tcpdump_package()
+ receive_pkt = re.findall("dst=%s" % self.vf1_mac, out)
+ self.verify(len(receive_pkt) == 2, "Failed error received vlan packet!")
+ tester_pkt = re.findall("vlan \d+", tcpdump_out)
+ self.verify(len(tester_pkt) == 4, "Failed pass received vlan packet!")
+
+ self.pmd_output.execute_cmd("vlan set strip off 0")
+ self.check_vlan_offload(vlan_type="strip", stats="off")
+ self.start_tcpdump(self.tester_iface0)
+ out = self.send_pkts_getouput(pkt_list)
+ tcpdump_out = self.get_tcpdump_package()
+ receive_pkt = re.findall("dst=%s" % self.vf1_mac, out)
+ self.verify(len(receive_pkt) == 2, "Failed error received vlan packet!")
+ tester_pkt = re.findall("vlan \d+", tcpdump_out)
+ self.verify(len(tester_pkt) == 6, "Failed pass received vlan packet!")
+
+ def test_enable_disable_iavf_vlan_insert(self):
+ """
+ Enable/Disable IAVF VLAN header insertion
+ """
+ out_vlan = 1
+ pkt_list = ['Ether(dst="%s",type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac,
+ 'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=11,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable on' % self.pf_interface, '#')
+ self.setup_pf_vfs_env(vfs_num=1)
+ self.launch_testpmd(vfs_num=1)
+ self.pmd_output.execute_cmd("stop")
+ self.pmd_output.execute_cmd("port stop 0")
+ self.pmd_output.execute_cmd("tx_vlan set 0 1")
+ self.pmd_output.execute_cmd("port start 0")
+ self.pmd_output.execute_cmd("start")
+ self._send_packet_check_vlan_inter(pkt_list, out_vlan, port_id=0)
+
+ self.pmd_output.execute_cmd("stop")
+ self.pmd_output.execute_cmd("port stop 0")
+ self.pmd_output.execute_cmd("tx_vlan reset 0")
+ self.pmd_output.execute_cmd("port start 0")
+ self.pmd_output.execute_cmd("start")
+ self._send_packet_check_vlan_inter(pkt_list, out_vlan=0, port_id=0)
+
+ def _send_pkt_check_vlan_and_crc(self, pkt, pkt_len=None, vlan_strip=False, crc_strip=False):
+ if pkt_len:
+ self.start_tcpdump(self.tester_iface0)
+ out = self.send_pkts_getouput(pkt)
+ pkt_length = re.search("length=(\d+)", out).group(1)
+ rx_bytes = re.search("RX-bytes:\s+(\d+)", out).group(1)
+ if crc_strip:
+ self.verify(rx_bytes == pkt_length, "CRC strip on failed")
+ else:
+ self.verify(int(rx_bytes) == int(pkt_length)+4, "CRC strip off failed")
+ if pkt_len:
+ tcpdump_out = self.get_tcpdump_package()
+ vlan_list = re.findall("vlan\s+\d+", tcpdump_out)
+ if not vlan_strip:
+ self.verify(pkt_length == pkt_len, "vlan strip off failed")
+ self.verify(len(vlan_list) == 4, "Failed pass received vlan packet")
+ elif vlan_strip:
+ self.verify(int(pkt_length)+4 == int(pkt_len), "vlan strip off failed")
+ self.verify(len(vlan_list) == 3 and vlan_list[0] != vlan_list[-1], "Failed error received vlan packet")
+
+ def test_enable_disable_iavf_CRC_strip(self):
+ """
+ Enable/disable AVF CRC stripping
+ """
+ param = '--rxq=16 --txq=16 --disable-crc-strip'
+ pkt = 'Ether(dst="%s",type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
+ self.setup_pf_vfs_env(vfs_num=1)
+ self.pmd_output.start_testpmd(cores='1S/4C/1T', param=param, ports=self.pci_list, socket=self.ports_socket)
+ self.pmd_output.execute_cmd("set fwd mac")
+ self.pmd_output.execute_cmd("set verbose 1")
+ self.pmd_output.execute_cmd("start")
+ self._send_pkt_check_vlan_and_crc(pkt)
+
+ self.pmd_output.execute_cmd("stop")
+ self.pmd_output.execute_cmd("port stop 0")
+ self.pmd_output.execute_cmd("port config 0 rx_offload keep_crc off")
+ self.pmd_output.execute_cmd("port start 0")
+ self.pmd_output.execute_cmd("start")
+ self._send_pkt_check_vlan_and_crc(pkt, crc_strip=True)
+
+ self.pmd_output.execute_cmd("stop")
+ self.pmd_output.execute_cmd("port stop 0")
+ self.pmd_output.execute_cmd("port config 0 rx_offload keep_crc on")
+ self.pmd_output.execute_cmd("port start 0")
+ self.pmd_output.execute_cmd("start")
+ self._send_pkt_check_vlan_and_crc(pkt)
+
+ self.pmd_output.execute_cmd("quit", "#")
+ self.launch_testpmd(vfs_num=1)
+ self.start_tcpdump(self.tester_iface0)
+ self._send_pkt_check_vlan_and_crc(pkt, crc_strip=True)
+
+ def test_CRC_strip_iavf_vlan_strip_coexists(self):
+ """
+ AVF CRC strip and Vlan strip co-exists
+ """
+ pkt = 'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, "#")
+ self.setup_pf_vfs_env(vfs_num=1)
+ self.launch_testpmd(vfs_num=1)
+ self.check_vlan_offload(vlan_type="strip", stats="off")
+ self.pmd_output.execute_cmd("stop")
+ self.pmd_output.execute_cmd("vlan set strip off 0")
+ self.check_vlan_offload(vlan_type="strip", stats="off")
+ self.pmd_output.execute_cmd("vlan set filter on 0")
+ self.pmd_output.execute_cmd("rx_vlan add 1 0")
+ self.pmd_output.execute_cmd("start")
+
+ self.start_tcpdump(self.tester_iface0)
+ out = self.send_pkts_getouput(pkt)
+ tcpdump_out = self.get_tcpdump_package()
+ pkt_len = re.search("length=(\d+)", out).group(1)
+ vlan_list = re.findall("vlan\s+\d+", tcpdump_out)
+ self.verify(len(vlan_list) == 4, "vlan strip off failed")
+ rx_bytes = re.search("RX-bytes:\s+(\d+)", out).group(1)
+ tx_bytes = re.search("TX-bytes:\s+(\d+)", out).group(1)
+ self.verify(rx_bytes == tx_bytes == pkt_len, "CRC strip on failed")
+
+ self.pmd_output.execute_cmd("vlan set strip on 0")
+ self.check_vlan_offload(vlan_type="strip", stats="on")
+ self._send_pkt_check_vlan_and_crc(pkt=pkt, pkt_len=pkt_len, vlan_strip=True)
+
+ self.pmd_output.execute_cmd("vlan set strip off 0")
+ self.check_vlan_offload(vlan_type="strip", stats="off")
+ self.pmd_output.execute_cmd("stop")
+ self.pmd_output.execute_cmd("port stop 0")
+ self.pmd_output.execute_cmd("port config 0 rx_offload keep_crc on")
+ self.pmd_output.execute_cmd("port start 0")
+ self.pmd_output.execute_cmd("start")
+ self._send_pkt_check_vlan_and_crc(pkt=pkt, pkt_len=pkt_len)
+
+ out = self.pmd_output.execute_cmd("vlan set strip on 0")
+ p = "iavf_config_vlan_strip_v2(): fail to execute command VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2"
+ self.verify(p in out, "set vlan strip on successfully")
+ self._send_pkt_check_vlan_and_crc(pkt=pkt, pkt_len=pkt_len)
+
+ self.pmd_output.execute_cmd("vlan set strip off 0")
+ self.check_vlan_offload(vlan_type="strip", stats="off")
+ self.pmd_output.execute_cmd("stop")
+ self.pmd_output.execute_cmd("port stop 0")
+ self.pmd_output.execute_cmd("port config 0 rx_offload keep_crc off")
+ self.pmd_output.execute_cmd("port start 0")
+ self.pmd_output.execute_cmd("start")
+ self._send_pkt_check_vlan_and_crc(pkt=pkt, pkt_len=pkt_len, crc_strip=True)
+
+ def tear_down(self):
+ self.pmd_output.execute_cmd('quit', '#')
+ self.dut.kill_all()
+ self.destroy_iavf()
+
+ def tear_down_all(self):
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
\ No newline at end of file
--
2.17.1
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [dts] [PATCH v2] tests: add new suite
2021-04-08 14:25 [dts] [PATCH v2] tests: add new suite Hailin Xu
@ 2021-04-08 6:55 ` Xu, HailinX
2021-04-08 7:00 ` Xu, HailinX
1 sibling, 0 replies; 5+ messages in thread
From: Xu, HailinX @ 2021-04-08 6:55 UTC (permalink / raw)
To: dts; +Cc: Fu, Qi
[-- Attachment #1: Type: text/plain, Size: 460 bytes --]
> -----Original Message-----
> From: Xu, HailinX <hailinx.xu@intel.com>
> Sent: Thursday, April 8, 2021 10:26 PM
> To: dts@dpdk.org
> Cc: Fu, Qi <qi.fu@intel.com>; Xu, HailinX <hailinx.xu@intel.com>
> Subject: [dts][PATCH v2] tests: add new suite
> add cvl_qinq suite
> Signed-off-by: Hailin Xu <hailinx.xu@intel.com>
> ---
> v1: add cvl_qinq suite
> v2: fix format issue and spelling issue
> Tested-by: Xu Hailin <hailinx.xu@intel.com>
[-- Attachment #2: TestCvlQinq.log --]
[-- Type: application/octet-stream, Size: 856308 bytes --]
[-- Attachment #3: TestCvlQinq.log --]
[-- Type: application/octet-stream, Size: 1013309 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dts] [PATCH v2] tests: add new suite
2021-04-08 14:25 [dts] [PATCH v2] tests: add new suite Hailin Xu
2021-04-08 6:55 ` Xu, HailinX
@ 2021-04-08 7:00 ` Xu, HailinX
2021-04-08 8:48 ` Fu, Qi
1 sibling, 1 reply; 5+ messages in thread
From: Xu, HailinX @ 2021-04-08 7:00 UTC (permalink / raw)
To: dts; +Cc: Fu, Qi
[-- Attachment #1: Type: text/plain, Size: 458 bytes --]
> -----Original Message-----
> From: Xu, HailinX <hailinx.xu@intel.com>
> Sent: Thursday, April 8, 2021 10:26 PM
> To: dts@dpdk.org
> Cc: Fu, Qi <qi.fu@intel.com>; Xu, HailinX <hailinx.xu@intel.com>
> Subject: [dts][PATCH v2] tests: add new suite
> add cvl_qinq suite
> Signed-off-by: Hailin Xu <hailinx.xu@intel.com>
> ---
> v1: add cvl_qinq suite
> v2: fix format issue and spelling issue
Tested-by: Xu Hailin <hailinx.xu@intel.com>
[-- Attachment #2: TestCvlQinq.log --]
[-- Type: application/octet-stream, Size: 1013309 bytes --]
[-- Attachment #3: TestCvlQinq.log --]
[-- Type: application/octet-stream, Size: 856308 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dts] [PATCH v2] tests: add new suite
2021-04-08 7:00 ` Xu, HailinX
@ 2021-04-08 8:48 ` Fu, Qi
2021-04-12 5:44 ` Tu, Lijuan
0 siblings, 1 reply; 5+ messages in thread
From: Fu, Qi @ 2021-04-08 8:48 UTC (permalink / raw)
To: Xu, HailinX, dts
Acked-by: Fu, Qi <qi.fu@intel.com>
> -----Original Message-----
> From: Xu, HailinX <hailinx.xu@intel.com>
> Sent: Thursday, April 8, 2021 3:00 PM
> To: dts@dpdk.org
> Cc: Fu, Qi <qi.fu@intel.com>
> Subject: RE: [dts][PATCH v2] tests: add new suite
>
> > -----Original Message-----
> > From: Xu, HailinX <hailinx.xu@intel.com>
> > Sent: Thursday, April 8, 2021 10:26 PM
> > To: dts@dpdk.org
> > Cc: Fu, Qi <qi.fu@intel.com>; Xu, HailinX <hailinx.xu@intel.com>
> > Subject: [dts][PATCH v2] tests: add new suite
>
> > add cvl_qinq suite
>
> > Signed-off-by: Hailin Xu <hailinx.xu@intel.com>
> > ---
>
> > v1: add cvl_qinq suite
> > v2: fix format issue and spelling issue
>
> Tested-by: Xu Hailin <hailinx.xu@intel.com>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dts] [PATCH v2] tests: add new suite
2021-04-08 8:48 ` Fu, Qi
@ 2021-04-12 5:44 ` Tu, Lijuan
0 siblings, 0 replies; 5+ messages in thread
From: Tu, Lijuan @ 2021-04-12 5:44 UTC (permalink / raw)
To: Fu, Qi, Xu, HailinX, dts
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Fu, Qi
> Sent: 2021年4月8日 16:48
> To: Xu, HailinX <hailinx.xu@intel.com>; dts@dpdk.org
> Subject: Re: [dts] [PATCH v2] tests: add new suite
>
> Acked-by: Fu, Qi <qi.fu@intel.com>
>
>
> > -----Original Message-----
> > From: Xu, HailinX <hailinx.xu@intel.com>
> > Sent: Thursday, April 8, 2021 3:00 PM
> > To: dts@dpdk.org
> > Cc: Fu, Qi <qi.fu@intel.com>
> > Subject: RE: [dts][PATCH v2] tests: add new suite
> >
> > > -----Original Message-----
> > > From: Xu, HailinX <hailinx.xu@intel.com>
> > > Sent: Thursday, April 8, 2021 10:26 PM
> > > To: dts@dpdk.org
> > > Cc: Fu, Qi <qi.fu@intel.com>; Xu, HailinX <hailinx.xu@intel.com>
> > > Subject: [dts][PATCH v2] tests: add new suite
> >
> > > add cvl_qinq suite
> >
> > > Signed-off-by: Hailin Xu <hailinx.xu@intel.com>
> > > ---
> >
> > > v1: add cvl_qinq suite
> > > v2: fix format issue and spelling issue
> >
> > Tested-by: Xu Hailin <hailinx.xu@intel.com>
Applied
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-04-12 5:44 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-08 14:25 [dts] [PATCH v2] tests: add new suite Hailin Xu
2021-04-08 6:55 ` Xu, HailinX
2021-04-08 7:00 ` Xu, HailinX
2021-04-08 8:48 ` Fu, Qi
2021-04-12 5:44 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).