* [dts][PATCH V1 1/2] test_plans/l3fwdacl: merge l3fwd-acl with l3fwd
2022-06-15 12:48 [dts][PATCH V1 0/2] l3fwdacl: merge l3fwd-acl with l3fwd Yu Jiang
@ 2022-06-15 12:48 ` Yu Jiang
2022-06-15 12:48 ` [dts][PATCH V1 2/2] tests/l3fwdacl: merge l3fwd-acl with l3fwd and fix to support different force-max-simd-bitwidth Yu Jiang
1 sibling, 0 replies; 6+ messages in thread
From: Yu Jiang @ 2022-06-15 12:48 UTC (permalink / raw)
To: lijuan.tu, dts; +Cc: Yu Jiang
According to dpdk22.07rc1 commit id 6de0ea50e("examples/l3fwd: merge l3fwd-acl example"),
modify l3fwdacl test plan.
Signed-off-by: Yu Jiang <yux.jiang@intel.com>
---
test_plans/l3fwdacl_test_plan.rst | 69 +++++++++++++++++++++----------
1 file changed, 47 insertions(+), 22 deletions(-)
diff --git a/test_plans/l3fwdacl_test_plan.rst b/test_plans/l3fwdacl_test_plan.rst
index cf838ac0..34f978bc 100644
--- a/test_plans/l3fwdacl_test_plan.rst
+++ b/test_plans/l3fwdacl_test_plan.rst
@@ -12,6 +12,8 @@ This document contains the test plan and results for testing
``l3fwd-acl`` using the ACL library for access control and L3
forwarding.
+Refer to http://git.dpdk.org/dpdk/tree/doc/guides/sample_app_ug/l3_forward.rst
+
The ``l3fwd-acl`` application uses an IPv4 5-tuple syntax for packet
matching. The 5-tuple consist of source IP address, destination IP
address, source port, destination port and a protocol identifier.
@@ -44,12 +46,35 @@ Prerequisites
insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
./usertools/dpdk-devbind.py --bind=igb_uio 04:00.0 04:00.1
-Build dpdk and examples=l3fwd-acl:
- CC=gcc meson -Denable_kmods=True -Dlibdir=lib --default-library=static <build_target>
- ninja -C <build_target>
-
- meson configure -Dexamples=l3fwd-acl <build_target>
- ninja -C <build_target>
+3. Build dpdk and examples=l3fwd::
+
+ CC=gcc meson -Denable_kmods=True -Dlibdir=lib --default-library=static <build_target>
+ ninja -C <build_target>
+ meson configure -Dexamples=l3fwd <build_target>
+ ninja -C <build_target>
+
+4. Run l3fwd-acl by using "--lookup acl" on L3FWD::
+
+ The application has a number of command line options:
+ ./<build_target>/examples/dpdk-l3fwd [EAL options] -- -p PORTMASK
+ --rule_ipv4=FILE
+ --rule_ipv6=FILE
+ [-P]
+ [--lookup LOOKUP_METHOD]
+ --config(port,queue,lcore)[,(port,queue,lcore)]
+ [--eth-dest=X,MM:MM:MM:MM:MM:MM]
+ [--max-pkt-len PKTLEN]
+ [--no-numa]
+ [--hash-entry-num]
+ [--ipv6]
+ [--parse-ptype]
+ [--per-port-pool]
+ [--mode]
+ [--eventq-sched]
+ [--event-eth-rxqs]
+ [--event-vector [--event-vector-size SIZE] [--event-vector-tmo NS]]
+ [-E]
+ [-L]
Test Case: packet match ACL rule
================================
@@ -63,7 +88,7 @@ Ipv4 packet match source ip address 200.10.0.1 will be dropped::
Add one default rule in rule file /root/rule_ipv6.db
R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00 0
- ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+ ./<build_target>/examples/dpdk-l3fwd -c ff -n 3 -- -p 0x3 --lookup acl --parse-ptype --config="(0,0,2),(1,0,3)"
--rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
Send one ipv4 packet with source ip address 200.10.0.1 will be dropped.
@@ -78,7 +103,7 @@ Ipv4 packet match destination ip address 100.10.0.1 will be dropped::
Add one default rule in rule file /root/rule_ipv6.db
R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00 0
- ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+ ./<build_target>/examples/dpdk-l3fwd -c ff -n 3 -- -p 0x3 --lookup acl --parse-ptype --config="(0,0,2),(1,0,3)"
--rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
Send one ipv4 packet with destination ip address 100.10.0.1 will be dropped.
@@ -93,7 +118,7 @@ Ipv4 packet match source port 11 will be dropped::
Add one default rule in rule file /root/rule_ipv6.db
R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00 0
- ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+ ./<build_target>/examples/dpdk-l3fwd -c ff -n 3 -- -p 0x3 --lookup acl --parse-ptype --config="(0,0,2),(1,0,3)"
--rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
Send one ipv4 packet with source port 11 will be dropped.
@@ -108,7 +133,7 @@ Ipv4 packet match destination port 101 will be dropped::
Add one default rule in rule file /root/rule_ipv6.db
R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00 0
- ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+ ./<build_target>/examples/dpdk-l3fwd -c ff -n 3 -- -p 0x3 --lookup acl --parse-ptype --config="(0,0,2),(1,0,3)"
--rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
Send one ipv4 packet with destination port 101 will be dropped.
@@ -123,7 +148,7 @@ Ipv4 packet match protocol TCP will be dropped::
Add one default rule in rule file /root/rule_ipv6.db
R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00 0
- ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+ ./<build_target>/examples/dpdk-l3fwd -c ff -n 3 -- -p 0x3 --lookup acl --parse-ptype --config="(0,0,2),(1,0,3)"
--rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
Send one TCP ipv4 packet will be dropped.
@@ -138,7 +163,7 @@ Ipv4 packet match 5-tuple will be dropped::
Add one default rule in rule file /root/rule_ipv6.db
R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00 0
- ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+ ./<build_target>/examples/dpdk-l3fwd -c ff -n 3 -- -p 0x3 --lookup acl --parse-ptype --config="(0,0,2),(1,0,3)"
--rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
Send one TCP ipv4 packet with source ip address 200.10.0.1,
@@ -158,7 +183,7 @@ Ipv6 packet match source ipv6 address 2001:0db8:85a3:08d3:1319:8a2e:0370:7344/12
Add one default rule in rule file /root/rule_ipv4.db
R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
- ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+ ./<build_target>/examples/dpdk-l3fwd -c ff -n 3 -- -p 0x3 --lookup acl --parse-ptype --config="(0,0,2),(1,0,3)"
--rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
Send one ipv6 packet with source ip address 2001:0db8:85a3:08d3:1319:8a2e:0370:7344/128 will be dropped.
@@ -173,7 +198,7 @@ Ipv6 packet match destination ipv6 address 2002:0db8:85a3:08d3:1319:8a2e:0370:73
Add one default rule in rule file /root/rule_ipv4.db
R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
- ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+ ./<build_target>/examples/dpdk-l3fwd -c ff -n 3 -- -p 0x3 --lookup acl --parse-ptype --config="(0,0,2),(1,0,3)"
--rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
Send one ipv6 packet with destination ip address 2002:0db8:85a3:08d3:1319:8a2e:0370:7344/128 will be dropped.
@@ -188,7 +213,7 @@ Ipv6 packet match source port 11 will be dropped::
Add one default rule in rule file /root/rule_ipv4.db
R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
- ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+ ./<build_target>/examples/dpdk-l3fwd -c ff -n 3 -- -p 0x3 --lookup acl --parse-ptype --config="(0,0,2),(1,0,3)"
--rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
Send one ipv6 packet with source port 11 will be dropped.
@@ -203,7 +228,7 @@ Ipv6 packet match destination port 101 will be dropped::
Add one default rule in rule file /root/rule_ipv4.db
R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
- ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+ ./<build_target>/examples/dpdk-l3fwd -c ff -n 3 -- -p 0x3 --lookup acl --parse-ptype --config="(0,0,2),(1,0,3)"
--rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
Send one ipv6 packet with destination port 101 will be dropped.
@@ -218,7 +243,7 @@ Ipv6 packet match protocol TCP will be dropped::
Add one default rule in rule file /root/rule_ipv4.db
R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
- ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+ ./<build_target>/examples/dpdk-l3fwd -c ff -n 3 -- -p 0x3 --lookup acl --parse-ptype --config="(0,0,2),(1,0,3)"
--rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
Send one TCP ipv6 packet will be dropped.
@@ -233,7 +258,7 @@ Ipv6 packet match 5-tuple will be dropped::
Add one default rule in rule file /root/rule_ipv4.db
R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
- ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+ ./<build_target>/examples/dpdk-l3fwd -c ff -n 3 -- -p 0x3 --lookup acl --parse-ptype --config="(0,0,2),(1,0,3)"
--rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
Send one TCP ipv6 packet with source ip address 2001:0db8:85a3:08d3:1319:8a2e:0370:7344/128,
@@ -259,7 +284,7 @@ Add two exact rule as below in rule_ipv6.db::
Start l3fwd-acl and send packet::
- ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+ ./<build_target>/examples/dpdk-l3fwd -c ff -n 3 -- -p 0x3 --lookup acl --parse-ptype --config="(0,0,2),(1,0,3)"
--rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
Send one TCP ipv4 packet with source ip address 200.10.0.1, destination
@@ -290,7 +315,7 @@ Add two LPM rule as below in rule_ipv6.db::
Start l3fwd-acl and send packet::
- ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+ ./<build_target>/examples/dpdk-l3fwd -c ff -n 3 -- -p 0x3 --lookup acl --parse-ptype --config="(0,0,2),(1,0,3)"
--rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
Send one TCP ipv4 packet with destination ip address 1.1.1.1 will be forward to PORT0.
@@ -311,7 +336,7 @@ Packet match 5-tuple will be dropped::
@2001:0db8:85a3:08d3:1319:8a2e:0370:7344/128 2002:0db8:85a3:08d3:1319:8a2e:0370:7344/101 11 : 11 101 : 101 0x06/0xff
R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00 0
- ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+ ./<build_target>/examples/dpdk-l3fwd -c ff -n 3 -- -p 0x3 --lookup acl --parse-ptype --config="(0,0,2),(1,0,3)"
--rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db" --scalar
Send one TCP ipv4 packet with source ip address 200.10.0.1, destination ip address 100.10.0.1,
@@ -341,7 +366,7 @@ Add two ACL rule as below in rule_ipv6.db::
Start l3fwd-acl::
- ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+ ./<build_target>/examples/dpdk-l3fwd -c ff -n 3 -- -p 0x3 --lookup acl --parse-ptype --config="(0,0,2),(1,0,3)"
--rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
The l3fwdacl will not set up because of ivalid ACL rule.
--
2.25.1
^ permalink raw reply [flat|nested] 6+ messages in thread* [dts][PATCH V1 2/2] tests/l3fwdacl: merge l3fwd-acl with l3fwd and fix to support different force-max-simd-bitwidth
2022-06-15 12:48 [dts][PATCH V1 0/2] l3fwdacl: merge l3fwd-acl with l3fwd Yu Jiang
2022-06-15 12:48 ` [dts][PATCH V1 1/2] test_plans/l3fwdacl: " Yu Jiang
@ 2022-06-15 12:48 ` Yu Jiang
2022-06-15 8:52 ` Chen, LingliX
` (2 more replies)
1 sibling, 3 replies; 6+ messages in thread
From: Yu Jiang @ 2022-06-15 12:48 UTC (permalink / raw)
To: lijuan.tu, dts; +Cc: Yu Jiang, Lingli Chen
1, According to dpdk22.07rc1 commit id 6de0ea50e("examples/l3fwd: merge l3fwd-acl example"),
modify l3fwdacl suite.
2, Since DTS commit "7eaf4b60 tests/l3fwdacl: modify pmd param for acl" has incorrect usage,
fix script to support different rx_mode.
Signed-off-by: Lingli Chen <linglix.chen@intel.com>
Signed-off-by: Yu Jiang <yux.jiang@intel.com>
---
conf/app_name.cfg | 3 +--
tests/TestSuite_l3fwdacl.py | 49 ++++++++++++++++++++++---------------
2 files changed, 30 insertions(+), 22 deletions(-)
diff --git a/conf/app_name.cfg b/conf/app_name.cfg
index 5d3244da..84f65c92 100644
--- a/conf/app_name.cfg
+++ b/conf/app_name.cfg
@@ -37,7 +37,6 @@ l2fwd-event=target/examples/dpdk-l2fwd-event
l2fwd-jobstats=target/examples/dpdk-l2fwd-jobstats
l2fwd-keepalive=target/examples/dpdk-l2fwd-keepalive
l3fwd=target/examples/dpdk-l3fwd
-l3fwd-acl=target/examples/dpdk-l3fwd-acl
l3fwd-power=target/examples/dpdk-l3fwd-power
link_status_interrupt=target/examples/dpdk-link_status_interrupt
ntb=target/examples/dpdk-ntb
@@ -68,4 +67,4 @@ node=target/examples/dpdk-efd_node
server=target/examples/dpdk-efd_server
testpmd_vf=target/app/dpdk-testpmd-vf
vm_power_manager=target/examples/dpdk-vm_power_manager
-guest_cli=target/examples/dpdk-guest_cli
\ No newline at end of file
+guest_cli=target/examples/dpdk-guest_cli
diff --git a/tests/TestSuite_l3fwdacl.py b/tests/TestSuite_l3fwdacl.py
index 0876b978..58e23886 100644
--- a/tests/TestSuite_l3fwdacl.py
+++ b/tests/TestSuite_l3fwdacl.py
@@ -355,7 +355,7 @@ class TestL3fwdacl(TestCase):
extra_args = '--alg="scalar"'
cmdline = (
- '%s %s -- -p %s --config="(%d,0,2),(%d,0,3)" --rule_ipv4="%s" --rule_ipv6="%s" %s'
+ '%s %s -- -p %s --lookup acl --config="(%d,0,2),(%d,0,3)" --rule_ipv4="%s" --rule_ipv6="%s" %s --parse-ptype'
% (
self.app_l3fwd_acl_path,
self.eal_para,
@@ -447,6 +447,9 @@ class TestL3fwdacl(TestCase):
"""
tx_interface = self.tester.get_interface(tx_port)
rx_interface = self.tester.get_interface(rx_port)
+ # wait tester's interface up
+ for intfx in [tx_interface, rx_interface]:
+ self.tester.is_interface_up(intf=intfx)
if rule["sIpAddr"] != "ALL":
rule["sIpAddr"] = self.create_ipv4_ip_not_match(rule["sIpAddr"])
if rule["dIpAddr"] != "ALL":
@@ -478,6 +481,9 @@ class TestL3fwdacl(TestCase):
"""
tx_interface = self.tester.get_interface(tx_port)
rx_interface = self.tester.get_interface(rx_port)
+ # wait tester's interface up
+ for intfx in [tx_interface, rx_interface]:
+ self.tester.is_interface_up(intf=intfx)
if rule["sIpAddr"] != "ALL":
rule["sIpAddr"] = self.create_ipv6_ip_not_match(rule["sIpAddr"])
if rule["dIpAddr"] != "ALL":
@@ -499,7 +505,6 @@ class TestL3fwdacl(TestCase):
pkt = packet.Packet()
pkt.append_pkt(ethernet_str)
pkt.send_pkt(crb=self.tester, tx_port=tx_interface, timeout=30)
-
out = self.remove_dhcp_from_revpackets(inst)
return len(out)
@@ -509,6 +514,9 @@ class TestL3fwdacl(TestCase):
"""
tx_interface = self.tester.get_interface(tx_port)
rx_interface = self.tester.get_interface(rx_port)
+ # wait tester's interface up
+ for intfx in [tx_interface, rx_interface]:
+ self.tester.is_interface_up(intf=intfx)
etherStr = self.create_ipv4_rule_string(rule, "Ether")
dst_filter = {"layer": "ether", "config": {"dst": "not ff:ff:ff:ff:ff:ff"}}
@@ -526,6 +534,9 @@ class TestL3fwdacl(TestCase):
"""
tx_interface = self.tester.get_interface(tx_port)
rx_interface = self.tester.get_interface(rx_port)
+ # wait tester's interface up
+ for intfx in [tx_interface, rx_interface]:
+ self.tester.is_interface_up(intf=intfx)
etherStr = self.create_ipv6_rule_string(rule, "Ether")
fil = [{"layer": "ether", "config": {"dst": "not ff:ff:ff:ff:ff:ff"}}]
@@ -533,7 +544,6 @@ class TestL3fwdacl(TestCase):
pkt = packet.Packet()
pkt.append_pkt(etherStr)
pkt.send_pkt(crb=self.tester, tx_port=tx_interface, timeout=30)
-
out = self.remove_dhcp_from_revpackets(inst)
return len(out)
@@ -807,7 +817,7 @@ class TestL3fwdacl(TestCase):
self.create_acl_ipv4_db(rule_list)
cmdline = (
- '%s %s -- -p %s --config="(%d,0,2),(%d,0,3)" --rule_ipv4="%s" --rule_ipv6="%s"'
+ '%s %s -- -p %s --lookup acl --config="(%d,0,2),(%d,0,3)" --rule_ipv4="%s" --rule_ipv6="%s" --parse-ptype'
% (
self.app_l3fwd_acl_path,
self.eal_para,
@@ -834,7 +844,7 @@ class TestL3fwdacl(TestCase):
self.create_acl_ipv6_db(rule_list)
cmdline = (
- '%s %s -- -p %s --config="(%d,0,2),(%d,0,3)" --rule_ipv4="%s" --rule_ipv6="%s"'
+ '%s %s -- -p %s --lookup acl --config="(%d,0,2),(%d,0,3)" --rule_ipv4="%s" --rule_ipv6="%s" --parse-ptype'
% (
self.app_l3fwd_acl_path,
self.eal_para,
@@ -867,14 +877,17 @@ class TestL3fwdacl(TestCase):
cores = self.get_core_list()
self.verify(cores is not None, "Insufficient cores for speed testing")
- self.eal_para = self.dut.create_eal_parameters(
- cores=self.get_core_list(), other_eal_param="force-max-simd-bitwidth"
- )
+ self.eal_para = self.dut.create_eal_parameters(cores=self.get_core_list())
self.core_mask = utils.create_mask(cores)
print("Core mask: %s" % self.core_mask)
-
- if self.dut.dpdk_version >= "20.11.0":
- self.eal_para += " --force-max-simd-bitwidth=0"
+ # When execution.cfg set rx_mode=xxx, it should have priority.
+ print("eal_para = {}".format(self.eal_para))
+ if "force-max-simd-bitwidth" in self.eal_para:
+ pass
+ else:
+ # DTS commit 68bb1b92("tests/l3fwdacl: try to use highest available method") when dpdk > 20.11.0 by konstantin.ananyev@intel.com
+ if self.dut.dpdk_version >= "20.11.0":
+ self.eal_para += " --force-max-simd-bitwidth=0"
valid_ports = [port for port in ports if self.tester.get_local_port(port) != -1]
self.verify(
@@ -889,11 +902,8 @@ class TestL3fwdacl(TestCase):
TestL3fwdacl.default_rule["Port"] = self.dut_ports[1]
- # compile l3fwd-acl
- out = self.dut.build_dpdk_apps("examples/l3fwd-acl")
- self.app_l3fwd_acl_path = self.dut.apps_name["l3fwd-acl"]
- self.verify("Error" not in out, "compilation error 1")
- self.verify("No such file" not in out, "compilation error 2")
+ # dpdk22.07-rc1 commit 6de0ea50("examples/l3fwd: merge l3fwd-acl example"), compile l3fwd example.
+ self.app_l3fwd_acl_path = self.dut.build_dpdk_apps("examples/l3fwd")
def test_l3fwdacl_acl_rule(self):
"""
@@ -1025,8 +1035,7 @@ class TestL3fwdacl(TestCase):
TestL3fwdacl.lpm_rule_list_ipv6[1], tx_port, rx_port
)
- self.dut.send_expect("^C", "#", 20)
-
+ self.dut.send_expect("^C", "#", 30)
self.verify(out1 >= 1, "Rx port0 not receive expected packet")
self.verify(out2 >= 1, "Rx port1 not receive expected packet")
@@ -1103,7 +1112,7 @@ class TestL3fwdacl(TestCase):
self.create_acl_ipv4_db(rule_list_ipv4)
cmdline = (
- '%s %s -- -p %s --config="(%d,0,2),(%d,0,3)" --rule_ipv4="%s" --rule_ipv6="%s" --alg="scalar"'
+ '%s %s -- -p %s --lookup acl --config="(%d,0,2),(%d,0,3)" --rule_ipv4="%s" --rule_ipv6="%s" --alg="scalar" --parse-ptype'
% (
self.app_l3fwd_acl_path,
self.eal_para,
@@ -1123,7 +1132,7 @@ class TestL3fwdacl(TestCase):
self.create_acl_ipv6_db(rule_list_ipv6)
cmdline = (
- '%s %s -- -p %s --config="(%d,0,2),(%d,0,3)" --rule_ipv4="%s" --rule_ipv6="%s" --alg="scalar"'
+ '%s %s -- -p %s --lookup acl --config="(%d,0,2),(%d,0,3)" --rule_ipv4="%s" --rule_ipv6="%s" --alg="scalar" --parse-ptype'
% (
self.app_l3fwd_acl_path,
self.eal_para,
--
2.25.1
^ permalink raw reply [flat|nested] 6+ messages in thread