Greetings Team,

We are aiming to setup DPDK test suite in our environment and want to execute the test cases that are bundled with DTS

However, we are encountering issues such as compilation errors on “Target DUT” as indicated below in the output snippet

dts:

DUT 10.70.2.6

tester: ssh root@10.70.2.5

dut.10.70.2.6: ssh root@10.70.2.6

dts: CACHE: Cache will not be read.

dts: SKIP: The DPDK setup steps will be executed.

tester: sed -i '/10.70.2.6/d' ~/.ssh/known_hosts

tester: killall scapy 2>/dev/null; echo tester

tester: awk '/Hugepagesize/ {print $2}' /proc/meminfo

tester: scp -v dep/tgen.tgz root@10.70.2.5:~/

tester: scp -v dep/tclclient.tgz root@10.70.2.5:~/

tester: tar zxf tgen.tgz

tester: tar zxf tclclient.tgz

tester: modprobe uio

tester: Core0 bypassed

tester: modprobe igb

tester: modprobe ixgbe

tester: modprobe e1000e

tester: modprobe e1000

tester: cat /sys/bus/pci/devices/0000\:04\:00.0/vendor

tester: cat /sys/bus/pci/devices/0000\:04\:00.0/device

tester: cat /sys/bus/pci/devices/0000\:04\:00.0/vendor

tester: cat /sys/bus/pci/devices/0000\:04\:00.0/device

tester: ifconfig eno49 up

tester: cat /sys/bus/pci/devices/0000\:04\:00.1/vendor

tester: cat /sys/bus/pci/devices/0000\:04\:00.1/device

tester: cat /sys/bus/pci/devices/0000\:04\:00.1/vendor

tester: cat /sys/bus/pci/devices/0000\:04\:00.1/device

tester: ifconfig eno50 up

tester: cat /sys/bus/pci/devices/0000\:05\:00.0/vendor

tester: cat /sys/bus/pci/devices/0000\:05\:00.0/device

tester: cat /sys/bus/pci/devices/0000\:05\:00.0/vendor

tester: cat /sys/bus/pci/devices/0000\:05\:00.0/device

tester: ifconfig ens2f0 up

tester: cat /sys/bus/pci/devices/0000\:05\:00.1/vendor

tester: cat /sys/bus/pci/devices/0000\:05\:00.1/device

tester: cat /sys/bus/pci/devices/0000\:05\:00.1/vendor

tester: cat /sys/bus/pci/devices/0000\:05\:00.1/device

tester: ifconfig ens2f1 up

tester: Tester: [0000:04:00.0 10df:0720] unknow_nic

tester: Tester: [0000:04:00.1 10df:0720] unknow_nic

tester: Tester: [0000:05:00.0 8086:10fb] ens2f0

tester: Tester: [0000:05:00.1 8086:10fb] ens2f1

tester: {'intf': 'ens2f0', 'mac': '14:02:ec:74:2b:ec', 'pci': '0000:05:00.0', 'ipv4': '10.70.12.5', 'ipv6': 'fe80::1602:ecff:fe74:2bec', 'type': '8086:10fb', 'port': <net_device.NetDevice object at 0x7fc492c72790>}

tester: {'intf': 'ens2f1', 'mac': '14:02:ec:74:2b:ed', 'pci': '0000:05:00.1', 'ipv4': '10.70.3.5', 'ipv6': 'fe80::1602:ecff:fe74:2bed', 'type': '8086:10fb', 'port': <net_device.NetDevice object at 0x7fc492c72650>}

self.package dep/dpdk.tar.gz

dut.10.70.2.6: ls /tmp/ && cd ~

dut.10.70.2.6: scp -v dep/dpdk.tar.gz root@10.70.2.6:/tmp/

dut.10.70.2.6: ulimit -c unlimited

dut.10.70.2.6: rm -rf ~/dpdk

dut.10.70.2.6: tar zxf /tmp/dpdk.tar.gz -C ~

dut.10.70.2.6: ls ~/dpdk

prepare_package

dut.10.70.2.6: cd ~/dpdk

dut.10.70.2.6: alias ls='ls --color=none'

dut.10.70.2.6: Core0 bypassed

dut.10.70.2.6: DUT: [0000:04:00.0 10df:0720] Skipped: Unknown/not selected

dut.10.70.2.6: DUT: [0000:04:00.1 10df:0720] Skipped: Unknown/not selected

dut.10.70.2.6: cat /sys/bus/pci/devices/0000\:05\:00.0/vendor

dut.10.70.2.6: cat /sys/bus/pci/devices/0000\:05\:00.0/device

dut.10.70.2.6: cat /sys/bus/pci/devices/0000\:05\:00.0/vendor

dut.10.70.2.6: cat /sys/bus/pci/devices/0000\:05\:00.0/device

dut.10.70.2.6: cat /sys/bus/pci/devices/0000\:05\:00.1/vendor

dut.10.70.2.6: cat /sys/bus/pci/devices/0000\:05\:00.1/device

dut.10.70.2.6: cat /sys/bus/pci/devices/0000\:05\:00.1/vendor

dut.10.70.2.6: cat /sys/bus/pci/devices/0000\:05\:00.1/device

dut.10.70.2.6: echo 0000:05:00.0 > /sys/bus/pci/devices/0000\:05\:00.0/driver/unbind

dut.10.70.2.6: modprobe ixgbe

dut.10.70.2.6: echo 0000:05:00.0 > /sys/bus/pci/drivers/ixgbe/bind

dut.10.70.2.6: ifconfig ens2f0 up

dut.10.70.2.6: echo 0000:05:00.1 > /sys/bus/pci/devices/0000\:05\:00.1/driver/unbind

dut.10.70.2.6: modprobe ixgbe

dut.10.70.2.6: echo 0000:05:00.1 > /sys/bus/pci/drivers/ixgbe/bind

dut.10.70.2.6: ifconfig ens2f1 up

dut.10.70.2.6: ip link show ens2f0

dut.10.70.2.6: ip -family inet6 address show dev ens2f0 | awk '/inet6/ { print $2 }'

dut.10.70.2.6: ip -family inet address show dev ens2f0 | awk '/inet/ { print $2 }'

dut.10.70.2.6: ip link show ens2f1

dut.10.70.2.6: ip -family inet6 address show dev ens2f1 | awk '/inet6/ { print $2 }'

dut.10.70.2.6: ip -family inet address show dev ens2f1 | awk '/inet/ { print $2 }'

tester: ping -w 5 -c 5 -A -I ens2f0 10.70.12.5

dut.10.70.2.6: PORT MAP: [dut 0: tester 0]

tester: ping6 -w 5 -c 5 -A fe80::1602:ecff:fe74:239d%ens2f1

dut.10.70.2.6: PORT MAP: [dut 1: tester 1]

dut.10.70.2.6: DUT PORT MAP: [0, 1]

dut.10.70.2.6: {'intf': 'ens2f0', 'mac': '14:02:ec:74:23:9c', 'pci': '0000:05:00.0', 'numa': 0, 'ipv6': 'Not connected', 'type': '8086:10fb', 'port': <net_device.NetDevice object at 0x7fc492c72890>, 'ipv4': ''}

dut.10.70.2.6: {'intf': 'ens2f1', 'mac': '14:02:ec:74:23:9d', 'pci': '0000:05:00.1', 'numa': 0, 'ipv6': 'fe80::1602:ecff:fe74:239d', 'type': '8086:10fb', 'port': <net_device.NetDevice object at 0x7fc492c72e90>, 'ipv4': '10.70.3.6'}

dut_prerequisites

dts:

TARGET x86_64-native-linuxapp-gcc

dut.10.70.2.6: export RTE_TARGET=x86_64-native-linuxapp-gcc

dut.10.70.2.6: export RTE_SDK=`pwd`

dut.10.70.2.6: rm -rf x86_64-native-linuxapp-gcc

dut.10.70.2.6: rm -rf ./app/test/test_resource_c.res.o

dut.10.70.2.6: rm -rf ./app/test/test_resource_tar.res.o

dut.10.70.2.6: rm -rf ./app/test/test_pci_sysfs.res.o

dut.10.70.2.6: make -j 19 install T=x86_64-native-linuxapp-gcc

dut.10.70.2.6: make -j 19 -C test/

dut.10.70.2.6: cp -f ./test/test/test ./x86_64-native-linuxapp-gcc/app

dut.10.70.2.6: cp -f ./test/test-acl/testacl ./x86_64-native-linuxapp-gcc/app

dut.10.70.2.6: cp -f ./test/test-pipeline/testpipeline ./x86_64-native-linuxapp-gcc/app

dut.10.70.2.6: cp -f ./test/cmdline_test/cmdline_test ./x86_64-native-linuxapp-gcc/app

dut.10.70.2.6: ERROR - try without '-j'

dut.10.70.2.6: make install T=x86_64-native-linuxapp-gcc

dut.10.70.2.6: make -j 19 -C test/

dut.10.70.2.6: cp -f ./test/test/test ./x86_64-native-linuxapp-gcc/app

dut.10.70.2.6: cp -f ./test/test-acl/testacl ./x86_64-native-linuxapp-gcc/app

dut.10.70.2.6: cp -f ./test/test-pipeline/testpipeline ./x86_64-native-linuxapp-gcc/app

dut.10.70.2.6: cp -f ./test/cmdline_test/cmdline_test ./x86_64-native-linuxapp-gcc/app

dts: TARGET ERROR: Compilation error...

tester: modprobe igb

tester: modprobe ixgbe

tester: modprobe e1000e

tester: modprobe e1000

tester: ifconfig eno49 up

tester: ifconfig eno50 up

tester: ifconfig ens2f0 up

tester: ifconfig ens2f1 up

dut.10.70.2.6: echo 0000:05:00.0 > /sys/bus/pci/devices/0000\:05\:00.0/driver/unbind

dut.10.70.2.6: modprobe ixgbe

dut.10.70.2.6: echo 0000:05:00.0 > /sys/bus/pci/drivers/ixgbe/bind

dut.10.70.2.6: ifconfig ens2f0 up

dut.10.70.2.6: echo 0000:05:00.1 > /sys/bus/pci/devices/0000\:05\:00.1/driver/unbind

dut.10.70.2.6: modprobe ixgbe

dut.10.70.2.6: echo 0000:05:00.1 > /sys/bus/pci/drivers/ixgbe/bind

dut.10.70.2.6: ifconfig ens2f1 up

dts: DTS ended

It would be helpful if anyone could guide me with the correct pointers to go over this issue and help me advance further.

The current running configuration in our set-up is as follows:

[root@tester dts]# cat conf/ports.cfg

# DUT Port Configuration

# [DUT IP]

# ports=

# pci=Pci BDF,intf=Kernel interface;

# pci=Pci BDF,mac=Mac address,peer=Tester Pci BDF,numa=Port Numa

# pci=Pci BDF,peer=IXIA:card.port

# pci=Pci BDF,peer=Tester Pci BDF,tp_ip=$(IP),tp_path=$({PERL_PATH);

# pci=Pci BDF,peer=Tester Pci BDF,sec_port=yes,first_port=Pci BDF;

# [VM NAME] virtual machine name; This section is for virutal scenario

# ports =

# dev_idx=device index of ports info, peer=Tester Pci BDF

[10.70.2.6]

ports =

pci=05:00.0,intf=ens2f0;

pci=05:00.1,intf=ens2f1;

[root@tester dts]# cat executions/execution.cfg

[Execution1]

crbs=10.70.2.6

drivername=igb_uio

test_suites=hello_world

test_suites=

cmdline,

hello_world

targets=x86_64-native-linuxapp-gcc

parameters=nic_type=niantic:func=true

[root@tester dts]# cat conf/crbs.cfg

#DUT crbs Configuration

#[DUT IP]

# dut_ip: DUT ip address

# dut_user: Login DUT username

# dut_passwd: Login DUT password

# os: operation system type linux or freebsd

# tester_ip: Tester ip address

# tester_passwd: Tester password

# ixia_group: IXIA group name

# channels: Board channel number

# bypass_core0: Whether by pass core0

[10.70.2.6]

dut_ip=10.70.2.6

dut_user=root

dut_passwd=HP1nvent

os=fedora

tester_ip=10.70.2.5

tester_passwd=HP1nvent

channels=4

Thanking in advance

Chengappa