[dts] [PATCH V1 0/2] support pvp_multi_paths_vhost_single_core_performance run per patch

[dts] [PATCH V1 0/2] support pvp_multi_paths_vhost_single_core_performance run per patch

[lihong]

*add config file and modify suite to support pvp_multi_paths_vhost_single_core_performance
check throughput value can reach expected.

lihong (2):
  conf: add config file to support per patch performance of virtio
  tests/pvp_multi_paths_vhost_single_core_performance: modify code to
    support per patch performance

 ...p_multi_paths_vhost_single_core_performance.cfg |   6 +
 ...vp_multi_paths_vhost_single_core_performance.py | 228 +++++++++++++++++----
 2 files changed, 199 insertions(+), 35 deletions(-)
 create mode 100644 conf/pvp_multi_paths_vhost_single_core_performance.cfg

-- 
2.7.4

[dts] [PATCH V1 1/2] conf: add config file to support per patch performance of virtio

[lihong]

add config file pvp_multi_paths_vhost_single_core_performance.cfg to
support suite run per patch performance

Signed-off-by: lihong <lihongx.ma@intel.com>
---
 conf/pvp_multi_paths_vhost_single_core_performance.cfg | 6 ++++++
 1 file changed, 6 insertions(+)
 create mode 100644 conf/pvp_multi_paths_vhost_single_core_performance.cfg

diff --git a/conf/pvp_multi_paths_vhost_single_core_performance.cfg b/conf/pvp_multi_paths_vhost_single_core_performance.cfg
new file mode 100644
index 0000000..c2e9a02
--- /dev/null
+++ b/conf/pvp_multi_paths_vhost_single_core_performance.cfg
@@ -0,0 +1,6 @@
+[suite]
+update_expected = True
+test_parameters = {64: [1024],1518: [1024]}
+test_duration = 60
+accepted_tolerance = 2
+expected_throughput = {'test_perf_vhost_single_core_virtio11_mergeable': {64: {1024: 0.00}, 1518: {1024: 0.00}}, 'test_perf_vhost_single_core_virtio11_normal': {64: {1024: 0.00}, 1518: {1024: 0.00}}, 'test_perf_vhost_single_core_virtio11_inorder_mergeable': {64: {1024: 0.00}, 1518: {1024: 0.00}}, 'test_perf_vhost_single_core_virtio11_inorder_normal': {64: {1024: 0.00}, 1518: {1024: 0.00}}, 'test_perf_vhost_single_core_inorder_mergeable': {64: {1024: 0.00}, 1518: {1024: 0.00}}, 'test_perf_vhost_single_core_inorder_no_mergeable': {64: {1024: 0.00}, 1518: {1024: 0.00}},'test_perf_vhost_single_core_mergeable': {64: {1024: 0.00}, 1518: {1024: 0.00}},'test_perf_vhost_single_core_normal': {64: {1024: 0.00}, 1518: {1024: 0.00}},'test_perf_vhost_single_core_vector_rx': {64: {1024: 0.00}, 1518: {1024: 0.00}}}
-- 
2.7.4

Re: [dts] [PATCH V1 1/2] conf: add config file to support per patch performance of virtio

[Ma, LihongX]

Tested-by:ma,lihong<lihongx.ma@intel.com>

Regards,
Ma,lihong


-----Original Message-----
From: Ma, LihongX 
Sent: Friday, February 28, 2020 6:41 AM
To: dts@dpdk.org
Cc: Ma, LihongX <lihongx.ma@intel.com>
Subject: [dts][PATCH V1 1/2] conf: add config file to support per patch performance of virtio

add config file pvp_multi_paths_vhost_single_core_performance.cfg to support suite run per patch performance

Signed-off-by: lihong <lihongx.ma@intel.com>
---
 conf/pvp_multi_paths_vhost_single_core_performance.cfg | 6 ++++++
 1 file changed, 6 insertions(+)
 create mode 100644 conf/pvp_multi_paths_vhost_single_core_performance.cfg

diff --git a/conf/pvp_multi_paths_vhost_single_core_performance.cfg b/conf/pvp_multi_paths_vhost_single_core_performance.cfg
new file mode 100644
index 0000000..c2e9a02
--- /dev/null
+++ b/conf/pvp_multi_paths_vhost_single_core_performance.cfg
@@ -0,0 +1,6 @@
+[suite]
+update_expected = True
+test_parameters = {64: [1024],1518: [1024]} test_duration = 60 
+accepted_tolerance = 2 expected_throughput = 
+{'test_perf_vhost_single_core_virtio11_mergeable': {64: {1024: 0.00}, 
+1518: {1024: 0.00}}, 'test_perf_vhost_single_core_virtio11_normal': 
+{64: {1024: 0.00}, 1518: {1024: 0.00}}, 
+'test_perf_vhost_single_core_virtio11_inorder_mergeable': {64: {1024: 
+0.00}, 1518: {1024: 0.00}}, 
+'test_perf_vhost_single_core_virtio11_inorder_normal': {64: {1024: 
+0.00}, 1518: {1024: 0.00}}, 
+'test_perf_vhost_single_core_inorder_mergeable': {64: {1024: 0.00}, 
+1518: {1024: 0.00}}, 
+'test_perf_vhost_single_core_inorder_no_mergeable': {64: {1024: 0.00}, 
+1518: {1024: 0.00}},'test_perf_vhost_single_core_mergeable': {64: 
+{1024: 0.00}, 1518: {1024: 0.00}},'test_perf_vhost_single_core_normal': 
+{64: {1024: 0.00}, 1518: {1024: 
+0.00}},'test_perf_vhost_single_core_vector_rx': {64: {1024: 0.00}, 
+1518: {1024: 0.00}}}
--
2.7.4

[dts] [PATCH V1 2/2] tests/pvp_multi_paths_vhost_single_core_performance: modify code to support per patch performance

[lihong]

Signed-off-by: lihong <lihongx.ma@intel.com>
---
 ...vp_multi_paths_vhost_single_core_performance.py | 228 +++++++++++++++++----
 1 file changed, 193 insertions(+), 35 deletions(-)

diff --git a/tests/TestSuite_pvp_multi_paths_vhost_single_core_performance.py b/tests/TestSuite_pvp_multi_paths_vhost_single_core_performance.py
index a8b9e67..4abaa6b 100644
--- a/tests/TestSuite_pvp_multi_paths_vhost_single_core_performance.py
+++ b/tests/TestSuite_pvp_multi_paths_vhost_single_core_performance.py
@@ -34,10 +34,15 @@ DPDK Test suite.
 Test PVP vhost single core performance using virtio_user on 8 tx/rx path.
 """
 
+import json
+import rst
+import os
 import utils
 from test_case import TestCase
 from packet import Packet
 from pktgen import PacketGeneratorHelper
+from settings import UPDATE_EXPECTED, load_global_setting
+from copy import deepcopy
 
 
 class TestPVPMultiPathVhostPerformance(TestCase):
@@ -62,6 +67,10 @@ class TestPVPMultiPathVhostPerformance(TestCase):
             self.tester.send_expect('mkdir -p %s' % self.out_path, '# ')
         # create an instance to set stream field setting
         self.pktgen_helper = PacketGeneratorHelper()
+        self.vhost_user = self.dut.new_session(suite="user")
+        self.vhost = self.dut.new_session(suite="vhost")
+        self.save_result_flag = True
+        self.json_obj = {}
 
     def set_up(self):
         """
@@ -69,12 +78,26 @@ class TestPVPMultiPathVhostPerformance(TestCase):
         """
         # Prepare the result table
         self.table_header = ['Frame']
-        self.table_header.append("Mode")
+        self.table_header.append("Mode/RXD-TXD")
         self.table_header.append("Mpps")
         self.table_header.append("% linerate")
         self.result_table_create(self.table_header)
-        self.vhost_user = self.dut.new_session(suite="user")
-        self.vhost = self.dut.new_session(suite="vhost")
+
+        self.test_parameters = self.get_suite_cfg()['test_parameters']
+        # test parameters include: frames size, descriptor numbers
+        self.test_parameters = self.get_suite_cfg()['test_parameters']
+
+        # traffic duraion in second
+        self.test_duration = self.get_suite_cfg()['test_duration']
+
+        # initilize throughput attribution
+        # {'$framesize':{"$nb_desc": 'throughput'}
+        self.throughput = {}
+
+        # Accepted tolerance in Mpps
+        self.gap = self.get_suite_cfg()['accepted_tolerance']
+        self.test_result = {}
+        self.nb_desc = self.test_parameters[64][0]
 
     def send_and_verify(self, case_info):
         """
@@ -82,33 +105,36 @@ class TestPVPMultiPathVhostPerformance(TestCase):
         """
         for frame_size in self.frame_sizes:
             tgen_input = []
-            for port in range(self.number_of_ports):
-                rx_port = self.tester.get_local_port(
-                    self.dut_ports[port % self.number_of_ports])
-                tx_port = self.tester.get_local_port(
-                    self.dut_ports[(port) % self.number_of_ports])
-                destination_mac = self.dut.get_mac_address(
-                    self.dut_ports[(port) % self.number_of_ports])
-
-                pkt = Packet(pkt_type='UDP', pkt_len=frame_size)
-                pkt.config_layer('ether', {'dst': '%s' % destination_mac})
-                pkt.save_pcapfile(self.tester, "%s/multi_path_%d.pcap" % (self.out_path, port))
-                tgen_input.append((tx_port, rx_port, "%s/multi_path_%d.pcap" % (self.out_path, port)))
+            self.throughput[frame_size] = dict()
+            self.logger.info("Test running at parameters: " +
+                "framesize: {}, rxd/txd: {}".format(frame_size, self.nb_desc))
+            rx_port = self.tester.get_local_port(
+                self.dut_ports[0])
+            tx_port = self.tester.get_local_port(
+                self.dut_ports[0])
+            destination_mac = self.dut.get_mac_address(
+                self.dut_ports[0])
+
+            pkt = Packet(pkt_type='UDP', pkt_len=frame_size)
+            pkt.config_layer('ether', {'dst': '%s' % destination_mac})
+            pkt.save_pcapfile(self.tester, "%s/multi_path.pcap" % (self.out_path))
+            tgen_input.append((tx_port, rx_port, "%s/multi_path.pcap" % (self.out_path)))
 
             self.tester.pktgen.clear_streams()
             streams = self.pktgen_helper.prepare_stream_from_tginput(tgen_input, 100, None, self.tester.pktgen)
             traffic_opt = {'delay': 5}
             _, pps = self.tester.pktgen.measure_throughput(stream_ids=streams, options=traffic_opt)
             Mpps = pps / 1000000.0
-            self.verify(Mpps > 0, "%s can not receive packets of frame size %d" % (self.running_case, frame_size))
+            self.verify(Mpps > 0.0, "%s can not receive packets of frame size %d" % (self.running_case, frame_size))
 
-            throughput = Mpps * 100 / \
+            linerate = Mpps * 100 / \
                          float(self.wirespeed(self.nic, frame_size, self.number_of_ports))
+            self.throughput[frame_size][self.nb_desc] = Mpps
 
             results_row = [frame_size]
             results_row.append(case_info)
             results_row.append(Mpps)
-            results_row.append(throughput)
+            results_row.append(linerate)
             self.result_table_add(results_row)
 
     @property
@@ -130,7 +156,8 @@ class TestPVPMultiPathVhostPerformance(TestCase):
                                                    vdevs=['net_vhost0,iface=vhost-net,queues=1'])
         if self.check_2M_env:
             eal_param += " --single-file-segments"
-        command_line_client = "./%s/app/testpmd " % self.target + eal_param + " -- -i --nb-cores=1 --txd=1024 --rxd=1024"
+        command_line_client = "./%s/app/testpmd " % self.target + eal_param + \
+                    " -- -i --nb-cores=1 --txd=%d --rxd=%d" % (self.nb_desc, self.nb_desc)
         self.vhost.send_expect(command_line_client, "testpmd> ", 120)
         self.vhost.send_expect("set fwd mac", "testpmd> ", 120)
         self.vhost.send_expect("start", "testpmd> ", 120)
@@ -140,16 +167,114 @@ class TestPVPMultiPathVhostPerformance(TestCase):
         start testpmd on virtio
         """
         eal_param = self.dut.create_eal_parameters(cores=self.core_list_user, prefix='virtio',
+                                                    ports=[0],
                                                    vdevs=['virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,%s' %
                                                           args["version"]])
         if self.check_2M_env:
             eal_param += " --single-file-segments"
-        command_line_user = "./%s/app/testpmd " % self.target + eal_param + " -- -i %s --nb-cores=2 --txd=1024 --rxd=1024" % \
-                            args["path"]
+        command_line_user = "./%s/app/testpmd " % self.target + eal_param + \
+                            " -- -i %s --nb-cores=2 --txd=%d --rxd=%d" % \
+                            (args["path"], self.nb_desc, self.nb_desc)
         self.vhost_user.send_expect(command_line_user, "testpmd> ", 120)
         self.vhost_user.send_expect("set fwd io", "testpmd> ", 120)
         self.vhost_user.send_expect("start", "testpmd> ", 120)
 
+    def handle_expected(self):
+        """
+        Update expected numbers to configurate file: conf/$suite_name.cfg
+        """
+        if load_global_setting(UPDATE_EXPECTED) == "yes":
+            for frame_size in self.test_parameters.keys():
+                for nb_desc in self.test_parameters[frame_size]:
+                    self.expected_throughput[frame_size][nb_desc] = round(self.throughput[frame_size][nb_desc], 3)
+
+    def handle_results(self):
+        """
+        results handled process:
+        1, save to self.test_results
+        2, create test results table
+        3, save to json file for Open Lab
+        """
+        header = self.table_header
+        header.append("Expected Throughput")
+        header.append("Throughput Difference")
+        for frame_size in self.test_parameters.keys():
+            wirespeed = self.wirespeed(self.nic, frame_size, self.number_of_ports)
+            ret_datas = {}
+            for nb_desc in self.test_parameters[frame_size]:
+                ret_data = {}
+                ret_data[header[0]] = frame_size
+                ret_data[header[1]] = nb_desc
+                ret_data[header[2]] = "{:.3f} Mpps".format(
+                        self.throughput[frame_size][nb_desc])
+                ret_data[header[3]] = "{:.3f}%".format(
+                        self.throughput[frame_size][nb_desc] * 100 / wirespeed)
+                ret_data[header[4]] = "{:.3f} Mpps".format(
+                        self.expected_throughput[frame_size][nb_desc])
+                ret_data[header[5]] = "{:.3f} Mpps".format(
+                        self.throughput[frame_size][nb_desc] -
+                        self.expected_throughput[frame_size][nb_desc])
+                ret_datas[nb_desc] = deepcopy(ret_data)
+            self.test_result[frame_size] = deepcopy(ret_datas)
+        # Create test results table
+        self.result_table_create(header)
+        for frame_size in self.test_parameters.keys():
+            for nb_desc in self.test_parameters[frame_size]:
+                table_row = list()
+                for i in range(len(header)):
+                    table_row.append(
+                        self.test_result[frame_size][nb_desc][header[i]])
+                self.result_table_add(table_row)
+        # present test results to screen
+        self.result_table_print()
+        # save test results as a file
+        if self.save_result_flag:
+            self.save_result(self.test_result)
+
+    def save_result(self, data):
+        '''
+        Saves the test results as a separated file named with
+        self.nic+_perf_virtio_user_pvp.json in output folder
+        if self.save_result_flag is True
+        '''
+        case_name = self.running_case
+        self.json_obj[case_name] = list()
+        status_result = []
+        for frame_size in self.test_parameters.keys():
+            for nb_desc in self.test_parameters[frame_size]:
+                row_in = self.test_result[frame_size][nb_desc]
+                row_dict0 = dict()
+                row_dict0['performance'] = list()
+                row_dict0['parameters'] = list()
+                row_dict0['parameters'] = list()
+                result_throughput = float(row_in['Mpps'].split()[0])
+                expected_throughput = float(row_in['Expected Throughput'].split()[0])
+                # delta value and accepted tolerance in percentage
+                delta = result_throughput - expected_throughput
+                gap = expected_throughput * -self.gap * 0.01
+                delta = float(delta)
+                gap = float(gap)
+                self.logger.info("Accept tolerance are (Mpps) %f" % gap)
+                self.logger.info("Throughput Difference are (Mpps) %f" % delta)
+                if result_throughput > expected_throughput + gap:
+                    row_dict0['status'] = 'PASS'
+                else:
+                    row_dict0['status'] = 'FAIL'
+                self.verify(row_dict0['status'] == 'PASS', 'The throughput is not in correct range')
+                row_dict1 = dict(name="Throughput", value=result_throughput, unit="Mpps", delta=delta)
+                row_dict2 = dict(name="Txd/Rxd", value=row_in["Mode/RXD-TXD"], unit="descriptor")
+                row_dict3 = dict(name="frame_size", value=row_in["Frame"], unit="bytes")
+                row_dict0['performance'].append(row_dict1)
+                row_dict0['parameters'].append(row_dict2)
+                row_dict0['parameters'].append(row_dict3)
+                self.json_obj[case_name].append(row_dict0)
+                status_result.append(row_dict0['status'])
+        with open(os.path.join(rst.path2Result,
+                        '{0:s}_{1}.json'.format(
+                            self.nic, self.suite_name)), 'w') as fp:
+            json.dump(self.json_obj, fp)
+        self.verify("Fail" not in status_result, "Exceeded Gap")
+
     def close_all_testpmd(self):
         """
         close all testpmd of vhost and virtio
@@ -168,130 +293,163 @@ class TestPVPMultiPathVhostPerformance(TestCase):
         """
         performance for Vhost PVP virtio 1.1 Mergeable Path.
         """
+        self.test_target = self.running_case
+        self.expected_throughput = self.get_suite_cfg()['expected_throughput'][self.test_target]
         virtio_pmd_arg = {"version": "in_order=0,packed_vq=1,mrg_rxbuf=1",
                             "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
         self.start_vhost_testpmd()
         self.start_virtio_testpmd(virtio_pmd_arg)
         self.send_and_verify("virtio_1.1_mergeable on")
         self.close_all_testpmd()
-
-        self.close_all_session()
+        self.logger.info('result of all framesize result')
         self.result_table_print()
+        self.handle_expected()
+        self.handle_results()
 
     def test_perf_vhost_single_core_virtio11_normal(self):
         """
         performance for Vhost PVP virtio1.1 Normal Path.
         """
+        self.test_target = self.running_case
+        self.expected_throughput = self.get_suite_cfg()['expected_throughput'][self.test_target]
         virtio_pmd_arg = {"version": "in_order=0,packed_vq=1,mrg_rxbuf=0",
                             "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
         self.start_vhost_testpmd()
         self.start_virtio_testpmd(virtio_pmd_arg)
         self.send_and_verify("virtio_1.1 normal")
         self.close_all_testpmd()
-        self.close_all_session()
+        self.logger.info('result of all framesize result')
         self.result_table_print()
+        self.handle_expected()
+        self.handle_results()
 
     def test_perf_vhost_single_core_virtio11_inorder_mergeable(self):
         """
         performance for Vhost PVP virtio 1.1 inorder Mergeable Path.
         """
+        self.test_target = self.running_case
+        self.expected_throughput = self.get_suite_cfg()['expected_throughput'][self.test_target]
         virtio_pmd_arg = {"version": "in_order=1,packed_vq=1,mrg_rxbuf=1",
                             "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
         self.start_vhost_testpmd()
         self.start_virtio_testpmd(virtio_pmd_arg)
         self.send_and_verify("virtio_1.1_inorder_mergeable on")
         self.close_all_testpmd()
-
-        self.close_all_session()
+        self.logger.info('result of all framesize result')
         self.result_table_print()
+        self.handle_expected()
+        self.handle_results()
 
     def test_perf_vhost_single_core_virtio11_inorder_normal(self):
         """
         performance for Vhost PVP virtio1.1 inorder Normal Path.
         """
+        self.test_target = self.running_case
+        self.expected_throughput = self.get_suite_cfg()['expected_throughput'][self.test_target]
         virtio_pmd_arg = {"version": "in_order=1,packed_vq=1,mrg_rxbuf=0",
                             "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
         self.start_vhost_testpmd()
         self.start_virtio_testpmd(virtio_pmd_arg)
         self.send_and_verify("virtio_1.1 inorder normal")
         self.close_all_testpmd()
-        self.close_all_session()
+        self.logger.info('result of all framesize result')
         self.result_table_print()
+        self.handle_expected()
+        self.handle_results()
 
     def test_perf_vhost_single_core_inorder_mergeable(self):
         """
         performance for Vhost PVP In_order mergeable Path.
         """
+        self.test_target = self.running_case
+        self.expected_throughput = self.get_suite_cfg()['expected_throughput'][self.test_target]
         virtio_pmd_arg = {"version": "packed_vq=0,in_order=1,mrg_rxbuf=1",
                             "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
         self.start_vhost_testpmd()
         self.start_virtio_testpmd(virtio_pmd_arg)
         self.send_and_verify("inoder mergeable on")
         self.close_all_testpmd()
-        self.close_all_session()
+        self.logger.info('result of all framesize result')
         self.result_table_print()
+        self.handle_expected()
+        self.handle_results()
 
     def test_perf_vhost_single_core_inorder_no_mergeable(self):
         """
         performance for Vhost PVP In_order no_mergeable Path.
         """
+        self.test_target = self.running_case
+        self.expected_throughput = self.get_suite_cfg()['expected_throughput'][self.test_target]
         virtio_pmd_arg = {"version": "packed_vq=0,in_order=1,mrg_rxbuf=0",
                         "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
         self.start_vhost_testpmd()
         self.start_virtio_testpmd(virtio_pmd_arg)
         self.send_and_verify("inoder mergeable off")
         self.close_all_testpmd()
-        self.close_all_session()
+        self.logger.info('result of all framesize result')
         self.result_table_print()
+        self.handle_expected()
+        self.handle_results()
 
     def test_perf_vhost_single_core_mergeable(self):
         """
         performance for Vhost PVP Mergeable Path.
         """
+        self.test_target = self.running_case
+        self.expected_throughput = self.get_suite_cfg()['expected_throughput'][self.test_target]
         virtio_pmd_arg = {"version": "packed_vq=0,in_order=0,mrg_rxbuf=1",
                             "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
         self.start_vhost_testpmd()
         self.start_virtio_testpmd(virtio_pmd_arg)
         self.send_and_verify("mergeable on")
         self.close_all_testpmd()
-        self.close_all_session()
+        self.logger.info('result of all framesize result')
         self.result_table_print()
+        self.handle_expected()
+        self.handle_results()
 
     def test_perf_vhost_single_core_normal(self):
         """
         performance for Vhost PVP Normal Path.
         """
+        self.test_target = self.running_case
+        self.expected_throughput = self.get_suite_cfg()['expected_throughput'][self.test_target]
         virtio_pmd_arg = {"version": "packed_vq=0,in_order=0,mrg_rxbuf=0",
                             "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
         self.start_vhost_testpmd()
         self.start_virtio_testpmd(virtio_pmd_arg)
         self.send_and_verify("normal")
         self.close_all_testpmd()
-        self.close_all_session()
+        self.logger.info('result of all framesize result')
         self.result_table_print()
+        self.handle_expected()
+        self.handle_results()
 
     def test_perf_vhost_single_core_vector_rx(self):
         """
         performance for Vhost PVP Vector_RX Path
         """
+        self.test_target = self.running_case
+        self.expected_throughput = self.get_suite_cfg()['expected_throughput'][self.test_target]
         virtio_pmd_arg = {"version": "packed_vq=0,in_order=0,mrg_rxbuf=0",
                             "path": "--tx-offloads=0x0"}
         self.start_vhost_testpmd()
         self.start_virtio_testpmd(virtio_pmd_arg)
         self.send_and_verify("vector rx")
         self.close_all_testpmd()
-        self.close_all_session()
+        self.logger.info('result of all framesize result')
         self.result_table_print()
+        self.handle_expected()
+        self.handle_results()
 
     def tear_down(self):
         """
         Run after each test case.
         """
-        self.dut.send_expect("killall -s INT testpmd", "#")
-        self.close_all_session()
+        self.dut.kill_all()
 
     def tear_down_all(self):
         """
         Run after each test suite.
         """
-        pass
+        self.close_all_session()
-- 
2.7.4

Re: [dts] [PATCH V1 2/2] tests/pvp_multi_paths_vhost_single_core_performance: modify code to support per patch performance

[Ma, LihongX]

Tested-by:ma,lihong<lihongx.ma@intel.com>

Regards,
Ma,lihong


-----Original Message-----
From: Ma, LihongX 
Sent: Friday, February 28, 2020 6:42 AM
To: dts@dpdk.org
Cc: Ma, LihongX <lihongx.ma@intel.com>
Subject: [dts][PATCH V1 2/2] tests/pvp_multi_paths_vhost_single_core_performance: modify code to support per patch performance

Signed-off-by: lihong <lihongx.ma@intel.com>
---
 ...vp_multi_paths_vhost_single_core_performance.py | 228 +++++++++++++++++----
 1 file changed, 193 insertions(+), 35 deletions(-)

diff --git a/tests/TestSuite_pvp_multi_paths_vhost_single_core_performance.py b/tests/TestSuite_pvp_multi_paths_vhost_single_core_performance.py
index a8b9e67..4abaa6b 100644
--- a/tests/TestSuite_pvp_multi_paths_vhost_single_core_performance.py
+++ b/tests/TestSuite_pvp_multi_paths_vhost_single_core_performance.py
@@ -34,10 +34,15 @@ DPDK Test suite.
 Test PVP vhost single core performance using virtio_user on 8 tx/rx path.
 """
 
+import json
+import rst
+import os
 import utils
 from test_case import TestCase
 from packet import Packet
 from pktgen import PacketGeneratorHelper
+from settings import UPDATE_EXPECTED, load_global_setting from copy 
+import deepcopy
 
 
 class TestPVPMultiPathVhostPerformance(TestCase):
@@ -62,6 +67,10 @@ class TestPVPMultiPathVhostPerformance(TestCase):
             self.tester.send_expect('mkdir -p %s' % self.out_path, '# ')
         # create an instance to set stream field setting
         self.pktgen_helper = PacketGeneratorHelper()
+        self.vhost_user = self.dut.new_session(suite="user")
+        self.vhost = self.dut.new_session(suite="vhost")
+        self.save_result_flag = True
+        self.json_obj = {}
 
     def set_up(self):
         """
@@ -69,12 +78,26 @@ class TestPVPMultiPathVhostPerformance(TestCase):
         """
         # Prepare the result table
         self.table_header = ['Frame']
-        self.table_header.append("Mode")
+        self.table_header.append("Mode/RXD-TXD")
         self.table_header.append("Mpps")
         self.table_header.append("% linerate")
         self.result_table_create(self.table_header)
-        self.vhost_user = self.dut.new_session(suite="user")
-        self.vhost = self.dut.new_session(suite="vhost")
+
+        self.test_parameters = self.get_suite_cfg()['test_parameters']
+        # test parameters include: frames size, descriptor numbers
+        self.test_parameters = self.get_suite_cfg()['test_parameters']
+
+        # traffic duraion in second
+        self.test_duration = self.get_suite_cfg()['test_duration']
+
+        # initilize throughput attribution
+        # {'$framesize':{"$nb_desc": 'throughput'}
+        self.throughput = {}
+
+        # Accepted tolerance in Mpps
+        self.gap = self.get_suite_cfg()['accepted_tolerance']
+        self.test_result = {}
+        self.nb_desc = self.test_parameters[64][0]
 
     def send_and_verify(self, case_info):
         """
@@ -82,33 +105,36 @@ class TestPVPMultiPathVhostPerformance(TestCase):
         """
         for frame_size in self.frame_sizes:
             tgen_input = []
-            for port in range(self.number_of_ports):
-                rx_port = self.tester.get_local_port(
-                    self.dut_ports[port % self.number_of_ports])
-                tx_port = self.tester.get_local_port(
-                    self.dut_ports[(port) % self.number_of_ports])
-                destination_mac = self.dut.get_mac_address(
-                    self.dut_ports[(port) % self.number_of_ports])
-
-                pkt = Packet(pkt_type='UDP', pkt_len=frame_size)
-                pkt.config_layer('ether', {'dst': '%s' % destination_mac})
-                pkt.save_pcapfile(self.tester, "%s/multi_path_%d.pcap" % (self.out_path, port))
-                tgen_input.append((tx_port, rx_port, "%s/multi_path_%d.pcap" % (self.out_path, port)))
+            self.throughput[frame_size] = dict()
+            self.logger.info("Test running at parameters: " +
+                "framesize: {}, rxd/txd: {}".format(frame_size, self.nb_desc))
+            rx_port = self.tester.get_local_port(
+                self.dut_ports[0])
+            tx_port = self.tester.get_local_port(
+                self.dut_ports[0])
+            destination_mac = self.dut.get_mac_address(
+                self.dut_ports[0])
+
+            pkt = Packet(pkt_type='UDP', pkt_len=frame_size)
+            pkt.config_layer('ether', {'dst': '%s' % destination_mac})
+            pkt.save_pcapfile(self.tester, "%s/multi_path.pcap" % (self.out_path))
+            tgen_input.append((tx_port, rx_port, "%s/multi_path.pcap" % 
+ (self.out_path)))
 
             self.tester.pktgen.clear_streams()
             streams = self.pktgen_helper.prepare_stream_from_tginput(tgen_input, 100, None, self.tester.pktgen)
             traffic_opt = {'delay': 5}
             _, pps = self.tester.pktgen.measure_throughput(stream_ids=streams, options=traffic_opt)
             Mpps = pps / 1000000.0
-            self.verify(Mpps > 0, "%s can not receive packets of frame size %d" % (self.running_case, frame_size))
+            self.verify(Mpps > 0.0, "%s can not receive packets of 
+ frame size %d" % (self.running_case, frame_size))
 
-            throughput = Mpps * 100 / \
+            linerate = Mpps * 100 / \
                          float(self.wirespeed(self.nic, frame_size, self.number_of_ports))
+            self.throughput[frame_size][self.nb_desc] = Mpps
 
             results_row = [frame_size]
             results_row.append(case_info)
             results_row.append(Mpps)
-            results_row.append(throughput)
+            results_row.append(linerate)
             self.result_table_add(results_row)
 
     @property
@@ -130,7 +156,8 @@ class TestPVPMultiPathVhostPerformance(TestCase):
                                                    vdevs=['net_vhost0,iface=vhost-net,queues=1'])
         if self.check_2M_env:
             eal_param += " --single-file-segments"
-        command_line_client = "./%s/app/testpmd " % self.target + eal_param + " -- -i --nb-cores=1 --txd=1024 --rxd=1024"
+        command_line_client = "./%s/app/testpmd " % self.target + eal_param + \
+                    " -- -i --nb-cores=1 --txd=%d --rxd=%d" % 
+ (self.nb_desc, self.nb_desc)
         self.vhost.send_expect(command_line_client, "testpmd> ", 120)
         self.vhost.send_expect("set fwd mac", "testpmd> ", 120)
         self.vhost.send_expect("start", "testpmd> ", 120) @@ -140,16 +167,114 @@ class TestPVPMultiPathVhostPerformance(TestCase):
         start testpmd on virtio
         """
         eal_param = self.dut.create_eal_parameters(cores=self.core_list_user, prefix='virtio',
+                                                    ports=[0],
                                                    vdevs=['virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,%s' %
                                                           args["version"]])
         if self.check_2M_env:
             eal_param += " --single-file-segments"
-        command_line_user = "./%s/app/testpmd " % self.target + eal_param + " -- -i %s --nb-cores=2 --txd=1024 --rxd=1024" % \
-                            args["path"]
+        command_line_user = "./%s/app/testpmd " % self.target + eal_param + \
+                            " -- -i %s --nb-cores=2 --txd=%d --rxd=%d" % \
+                            (args["path"], self.nb_desc, self.nb_desc)
         self.vhost_user.send_expect(command_line_user, "testpmd> ", 120)
         self.vhost_user.send_expect("set fwd io", "testpmd> ", 120)
         self.vhost_user.send_expect("start", "testpmd> ", 120)
 
+    def handle_expected(self):
+        """
+        Update expected numbers to configurate file: conf/$suite_name.cfg
+        """
+        if load_global_setting(UPDATE_EXPECTED) == "yes":
+            for frame_size in self.test_parameters.keys():
+                for nb_desc in self.test_parameters[frame_size]:
+                    self.expected_throughput[frame_size][nb_desc] = 
+ round(self.throughput[frame_size][nb_desc], 3)
+
+    def handle_results(self):
+        """
+        results handled process:
+        1, save to self.test_results
+        2, create test results table
+        3, save to json file for Open Lab
+        """
+        header = self.table_header
+        header.append("Expected Throughput")
+        header.append("Throughput Difference")
+        for frame_size in self.test_parameters.keys():
+            wirespeed = self.wirespeed(self.nic, frame_size, self.number_of_ports)
+            ret_datas = {}
+            for nb_desc in self.test_parameters[frame_size]:
+                ret_data = {}
+                ret_data[header[0]] = frame_size
+                ret_data[header[1]] = nb_desc
+                ret_data[header[2]] = "{:.3f} Mpps".format(
+                        self.throughput[frame_size][nb_desc])
+                ret_data[header[3]] = "{:.3f}%".format(
+                        self.throughput[frame_size][nb_desc] * 100 / wirespeed)
+                ret_data[header[4]] = "{:.3f} Mpps".format(
+                        self.expected_throughput[frame_size][nb_desc])
+                ret_data[header[5]] = "{:.3f} Mpps".format(
+                        self.throughput[frame_size][nb_desc] -
+                        self.expected_throughput[frame_size][nb_desc])
+                ret_datas[nb_desc] = deepcopy(ret_data)
+            self.test_result[frame_size] = deepcopy(ret_datas)
+        # Create test results table
+        self.result_table_create(header)
+        for frame_size in self.test_parameters.keys():
+            for nb_desc in self.test_parameters[frame_size]:
+                table_row = list()
+                for i in range(len(header)):
+                    table_row.append(
+                        self.test_result[frame_size][nb_desc][header[i]])
+                self.result_table_add(table_row)
+        # present test results to screen
+        self.result_table_print()
+        # save test results as a file
+        if self.save_result_flag:
+            self.save_result(self.test_result)
+
+    def save_result(self, data):
+        '''
+        Saves the test results as a separated file named with
+        self.nic+_perf_virtio_user_pvp.json in output folder
+        if self.save_result_flag is True
+        '''
+        case_name = self.running_case
+        self.json_obj[case_name] = list()
+        status_result = []
+        for frame_size in self.test_parameters.keys():
+            for nb_desc in self.test_parameters[frame_size]:
+                row_in = self.test_result[frame_size][nb_desc]
+                row_dict0 = dict()
+                row_dict0['performance'] = list()
+                row_dict0['parameters'] = list()
+                row_dict0['parameters'] = list()
+                result_throughput = float(row_in['Mpps'].split()[0])
+                expected_throughput = float(row_in['Expected Throughput'].split()[0])
+                # delta value and accepted tolerance in percentage
+                delta = result_throughput - expected_throughput
+                gap = expected_throughput * -self.gap * 0.01
+                delta = float(delta)
+                gap = float(gap)
+                self.logger.info("Accept tolerance are (Mpps) %f" % gap)
+                self.logger.info("Throughput Difference are (Mpps) %f" % delta)
+                if result_throughput > expected_throughput + gap:
+                    row_dict0['status'] = 'PASS'
+                else:
+                    row_dict0['status'] = 'FAIL'
+                self.verify(row_dict0['status'] == 'PASS', 'The throughput is not in correct range')
+                row_dict1 = dict(name="Throughput", value=result_throughput, unit="Mpps", delta=delta)
+                row_dict2 = dict(name="Txd/Rxd", value=row_in["Mode/RXD-TXD"], unit="descriptor")
+                row_dict3 = dict(name="frame_size", value=row_in["Frame"], unit="bytes")
+                row_dict0['performance'].append(row_dict1)
+                row_dict0['parameters'].append(row_dict2)
+                row_dict0['parameters'].append(row_dict3)
+                self.json_obj[case_name].append(row_dict0)
+                status_result.append(row_dict0['status'])
+        with open(os.path.join(rst.path2Result,
+                        '{0:s}_{1}.json'.format(
+                            self.nic, self.suite_name)), 'w') as fp:
+            json.dump(self.json_obj, fp)
+        self.verify("Fail" not in status_result, "Exceeded Gap")
+
     def close_all_testpmd(self):
         """
         close all testpmd of vhost and virtio @@ -168,130 +293,163 @@ class TestPVPMultiPathVhostPerformance(TestCase):
         """
         performance for Vhost PVP virtio 1.1 Mergeable Path.
         """
+        self.test_target = self.running_case
+        self.expected_throughput = 
+ self.get_suite_cfg()['expected_throughput'][self.test_target]
         virtio_pmd_arg = {"version": "in_order=0,packed_vq=1,mrg_rxbuf=1",
                             "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
         self.start_vhost_testpmd()
         self.start_virtio_testpmd(virtio_pmd_arg)
         self.send_and_verify("virtio_1.1_mergeable on")
         self.close_all_testpmd()
-
-        self.close_all_session()
+        self.logger.info('result of all framesize result')
         self.result_table_print()
+        self.handle_expected()
+        self.handle_results()
 
     def test_perf_vhost_single_core_virtio11_normal(self):
         """
         performance for Vhost PVP virtio1.1 Normal Path.
         """
+        self.test_target = self.running_case
+        self.expected_throughput = 
+ self.get_suite_cfg()['expected_throughput'][self.test_target]
         virtio_pmd_arg = {"version": "in_order=0,packed_vq=1,mrg_rxbuf=0",
                             "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
         self.start_vhost_testpmd()
         self.start_virtio_testpmd(virtio_pmd_arg)
         self.send_and_verify("virtio_1.1 normal")
         self.close_all_testpmd()
-        self.close_all_session()
+        self.logger.info('result of all framesize result')
         self.result_table_print()
+        self.handle_expected()
+        self.handle_results()
 
     def test_perf_vhost_single_core_virtio11_inorder_mergeable(self):
         """
         performance for Vhost PVP virtio 1.1 inorder Mergeable Path.
         """
+        self.test_target = self.running_case
+        self.expected_throughput = 
+ self.get_suite_cfg()['expected_throughput'][self.test_target]
         virtio_pmd_arg = {"version": "in_order=1,packed_vq=1,mrg_rxbuf=1",
                             "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
         self.start_vhost_testpmd()
         self.start_virtio_testpmd(virtio_pmd_arg)
         self.send_and_verify("virtio_1.1_inorder_mergeable on")
         self.close_all_testpmd()
-
-        self.close_all_session()
+        self.logger.info('result of all framesize result')
         self.result_table_print()
+        self.handle_expected()
+        self.handle_results()
 
     def test_perf_vhost_single_core_virtio11_inorder_normal(self):
         """
         performance for Vhost PVP virtio1.1 inorder Normal Path.
         """
+        self.test_target = self.running_case
+        self.expected_throughput = 
+ self.get_suite_cfg()['expected_throughput'][self.test_target]
         virtio_pmd_arg = {"version": "in_order=1,packed_vq=1,mrg_rxbuf=0",
                             "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
         self.start_vhost_testpmd()
         self.start_virtio_testpmd(virtio_pmd_arg)
         self.send_and_verify("virtio_1.1 inorder normal")
         self.close_all_testpmd()
-        self.close_all_session()
+        self.logger.info('result of all framesize result')
         self.result_table_print()
+        self.handle_expected()
+        self.handle_results()
 
     def test_perf_vhost_single_core_inorder_mergeable(self):
         """
         performance for Vhost PVP In_order mergeable Path.
         """
+        self.test_target = self.running_case
+        self.expected_throughput = 
+ self.get_suite_cfg()['expected_throughput'][self.test_target]
         virtio_pmd_arg = {"version": "packed_vq=0,in_order=1,mrg_rxbuf=1",
                             "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
         self.start_vhost_testpmd()
         self.start_virtio_testpmd(virtio_pmd_arg)
         self.send_and_verify("inoder mergeable on")
         self.close_all_testpmd()
-        self.close_all_session()
+        self.logger.info('result of all framesize result')
         self.result_table_print()
+        self.handle_expected()
+        self.handle_results()
 
     def test_perf_vhost_single_core_inorder_no_mergeable(self):
         """
         performance for Vhost PVP In_order no_mergeable Path.
         """
+        self.test_target = self.running_case
+        self.expected_throughput = 
+ self.get_suite_cfg()['expected_throughput'][self.test_target]
         virtio_pmd_arg = {"version": "packed_vq=0,in_order=1,mrg_rxbuf=0",
                         "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
         self.start_vhost_testpmd()
         self.start_virtio_testpmd(virtio_pmd_arg)
         self.send_and_verify("inoder mergeable off")
         self.close_all_testpmd()
-        self.close_all_session()
+        self.logger.info('result of all framesize result')
         self.result_table_print()
+        self.handle_expected()
+        self.handle_results()
 
     def test_perf_vhost_single_core_mergeable(self):
         """
         performance for Vhost PVP Mergeable Path.
         """
+        self.test_target = self.running_case
+        self.expected_throughput = 
+ self.get_suite_cfg()['expected_throughput'][self.test_target]
         virtio_pmd_arg = {"version": "packed_vq=0,in_order=0,mrg_rxbuf=1",
                             "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
         self.start_vhost_testpmd()
         self.start_virtio_testpmd(virtio_pmd_arg)
         self.send_and_verify("mergeable on")
         self.close_all_testpmd()
-        self.close_all_session()
+        self.logger.info('result of all framesize result')
         self.result_table_print()
+        self.handle_expected()
+        self.handle_results()
 
     def test_perf_vhost_single_core_normal(self):
         """
         performance for Vhost PVP Normal Path.
         """
+        self.test_target = self.running_case
+        self.expected_throughput = 
+ self.get_suite_cfg()['expected_throughput'][self.test_target]
         virtio_pmd_arg = {"version": "packed_vq=0,in_order=0,mrg_rxbuf=0",
                             "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
         self.start_vhost_testpmd()
         self.start_virtio_testpmd(virtio_pmd_arg)
         self.send_and_verify("normal")
         self.close_all_testpmd()
-        self.close_all_session()
+        self.logger.info('result of all framesize result')
         self.result_table_print()
+        self.handle_expected()
+        self.handle_results()
 
     def test_perf_vhost_single_core_vector_rx(self):
         """
         performance for Vhost PVP Vector_RX Path
         """
+        self.test_target = self.running_case
+        self.expected_throughput = 
+ self.get_suite_cfg()['expected_throughput'][self.test_target]
         virtio_pmd_arg = {"version": "packed_vq=0,in_order=0,mrg_rxbuf=0",
                             "path": "--tx-offloads=0x0"}
         self.start_vhost_testpmd()
         self.start_virtio_testpmd(virtio_pmd_arg)
         self.send_and_verify("vector rx")
         self.close_all_testpmd()
-        self.close_all_session()
+        self.logger.info('result of all framesize result')
         self.result_table_print()
+        self.handle_expected()
+        self.handle_results()
 
     def tear_down(self):
         """
         Run after each test case.
         """
-        self.dut.send_expect("killall -s INT testpmd", "#")
-        self.close_all_session()
+        self.dut.kill_all()
 
     def tear_down_all(self):
         """
         Run after each test suite.
         """
-        pass
+        self.close_all_session()
--
2.7.4

Re: [dts] [PATCH V1 2/2] tests/pvp_multi_paths_vhost_single_core_performance: modify code to support per patch performance

[Tu, Lijuan]

Applied failed, could you please rework it, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of lihong
> Sent: Friday, February 28, 2020 6:42 AM
> To: dts@dpdk.org
> Cc: Ma, LihongX <lihongx.ma@intel.com>
> Subject: [dts] [PATCH V1 2/2]
> tests/pvp_multi_paths_vhost_single_core_performance: modify code to
> support per patch performance
> 
> Signed-off-by: lihong <lihongx.ma@intel.com>
> ---
>  ...vp_multi_paths_vhost_single_core_performance.py | 228
> +++++++++++++++++----
>  1 file changed, 193 insertions(+), 35 deletions(-)
> 
> diff --git
> a/tests/TestSuite_pvp_multi_paths_vhost_single_core_performance.py
> b/tests/TestSuite_pvp_multi_paths_vhost_single_core_performance.py
> index a8b9e67..4abaa6b 100644
> --- a/tests/TestSuite_pvp_multi_paths_vhost_single_core_performance.py
> +++ b/tests/TestSuite_pvp_multi_paths_vhost_single_core_performance.py
> @@ -34,10 +34,15 @@ DPDK Test suite.
>  Test PVP vhost single core performance using virtio_user on 8 tx/rx path.
>  """
> 
> +import json
> +import rst
> +import os
>  import utils
>  from test_case import TestCase
>  from packet import Packet
>  from pktgen import PacketGeneratorHelper
> +from settings import UPDATE_EXPECTED, load_global_setting from copy
> +import deepcopy
> 
> 
>  class TestPVPMultiPathVhostPerformance(TestCase):
> @@ -62,6 +67,10 @@ class TestPVPMultiPathVhostPerformance(TestCase):
>              self.tester.send_expect('mkdir -p %s' % self.out_path, '# ')
>          # create an instance to set stream field setting
>          self.pktgen_helper = PacketGeneratorHelper()
> +        self.vhost_user = self.dut.new_session(suite="user")
> +        self.vhost = self.dut.new_session(suite="vhost")
> +        self.save_result_flag = True
> +        self.json_obj = {}
> 
>      def set_up(self):
>          """
> @@ -69,12 +78,26 @@ class TestPVPMultiPathVhostPerformance(TestCase):
>          """
>          # Prepare the result table
>          self.table_header = ['Frame']
> -        self.table_header.append("Mode")
> +        self.table_header.append("Mode/RXD-TXD")
>          self.table_header.append("Mpps")
>          self.table_header.append("% linerate")
>          self.result_table_create(self.table_header)
> -        self.vhost_user = self.dut.new_session(suite="user")
> -        self.vhost = self.dut.new_session(suite="vhost")
> +
> +        self.test_parameters = self.get_suite_cfg()['test_parameters']
> +        # test parameters include: frames size, descriptor numbers
> +        self.test_parameters = self.get_suite_cfg()['test_parameters']
> +
> +        # traffic duraion in second
> +        self.test_duration = self.get_suite_cfg()['test_duration']
> +
> +        # initilize throughput attribution
> +        # {'$framesize':{"$nb_desc": 'throughput'}
> +        self.throughput = {}
> +
> +        # Accepted tolerance in Mpps
> +        self.gap = self.get_suite_cfg()['accepted_tolerance']
> +        self.test_result = {}
> +        self.nb_desc = self.test_parameters[64][0]
> 
>      def send_and_verify(self, case_info):
>          """
> @@ -82,33 +105,36 @@ class TestPVPMultiPathVhostPerformance(TestCase):
>          """
>          for frame_size in self.frame_sizes:
>              tgen_input = []
> -            for port in range(self.number_of_ports):
> -                rx_port = self.tester.get_local_port(
> -                    self.dut_ports[port % self.number_of_ports])
> -                tx_port = self.tester.get_local_port(
> -                    self.dut_ports[(port) % self.number_of_ports])
> -                destination_mac = self.dut.get_mac_address(
> -                    self.dut_ports[(port) % self.number_of_ports])
> -
> -                pkt = Packet(pkt_type='UDP', pkt_len=frame_size)
> -                pkt.config_layer('ether', {'dst': '%s' % destination_mac})
> -                pkt.save_pcapfile(self.tester, "%s/multi_path_%d.pcap" %
> (self.out_path, port))
> -                tgen_input.append((tx_port, rx_port, "%s/multi_path_%d.pcap" %
> (self.out_path, port)))
> +            self.throughput[frame_size] = dict()
> +            self.logger.info("Test running at parameters: " +
> +                "framesize: {}, rxd/txd: {}".format(frame_size, self.nb_desc))
> +            rx_port = self.tester.get_local_port(
> +                self.dut_ports[0])
> +            tx_port = self.tester.get_local_port(
> +                self.dut_ports[0])
> +            destination_mac = self.dut.get_mac_address(
> +                self.dut_ports[0])
> +
> +            pkt = Packet(pkt_type='UDP', pkt_len=frame_size)
> +            pkt.config_layer('ether', {'dst': '%s' % destination_mac})
> +            pkt.save_pcapfile(self.tester, "%s/multi_path.pcap" % (self.out_path))
> +            tgen_input.append((tx_port, rx_port, "%s/multi_path.pcap" %
> + (self.out_path)))
> 
>              self.tester.pktgen.clear_streams()
>              streams =
> self.pktgen_helper.prepare_stream_from_tginput(tgen_input, 100, None,
> self.tester.pktgen)
>              traffic_opt = {'delay': 5}
>              _, pps = self.tester.pktgen.measure_throughput(stream_ids=streams,
> options=traffic_opt)
>              Mpps = pps / 1000000.0
> -            self.verify(Mpps > 0, "%s can not receive packets of frame size %d" %
> (self.running_case, frame_size))
> +            self.verify(Mpps > 0.0, "%s can not receive packets of
> + frame size %d" % (self.running_case, frame_size))
> 
> -            throughput = Mpps * 100 / \
> +            linerate = Mpps * 100 / \
>                           float(self.wirespeed(self.nic, frame_size,
> self.number_of_ports))
> +            self.throughput[frame_size][self.nb_desc] = Mpps
> 
>              results_row = [frame_size]
>              results_row.append(case_info)
>              results_row.append(Mpps)
> -            results_row.append(throughput)
> +            results_row.append(linerate)
>              self.result_table_add(results_row)
> 
>      @property
> @@ -130,7 +156,8 @@ class TestPVPMultiPathVhostPerformance(TestCase):
>                                                     vdevs=['net_vhost0,iface=vhost-net,queues=1'])
>          if self.check_2M_env:
>              eal_param += " --single-file-segments"
> -        command_line_client = "./%s/app/testpmd " % self.target + eal_param
> + " -- -i --nb-cores=1 --txd=1024 --rxd=1024"
> +        command_line_client = "./%s/app/testpmd " % self.target + eal_param
> + \
> +                    " -- -i --nb-cores=1 --txd=%d --rxd=%d" %
> + (self.nb_desc, self.nb_desc)
>          self.vhost.send_expect(command_line_client, "testpmd> ", 120)
>          self.vhost.send_expect("set fwd mac", "testpmd> ", 120)
>          self.vhost.send_expect("start", "testpmd> ", 120) @@ -140,16 +167,114
> @@ class TestPVPMultiPathVhostPerformance(TestCase):
>          start testpmd on virtio
>          """
>          eal_param = self.dut.create_eal_parameters(cores=self.core_list_user,
> prefix='virtio',
> +                                                    ports=[0],
> 
> vdevs=['virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,%s' %
>                                                            args["version"]])
>          if self.check_2M_env:
>              eal_param += " --single-file-segments"
> -        command_line_user = "./%s/app/testpmd " % self.target + eal_param +
> " -- -i %s --nb-cores=2 --txd=1024 --rxd=1024" % \
> -                            args["path"]
> +        command_line_user = "./%s/app/testpmd " % self.target + eal_param +
> \
> +                            " -- -i %s --nb-cores=2 --txd=%d --rxd=%d" % \
> +                            (args["path"], self.nb_desc, self.nb_desc)
>          self.vhost_user.send_expect(command_line_user, "testpmd> ", 120)
>          self.vhost_user.send_expect("set fwd io", "testpmd> ", 120)
>          self.vhost_user.send_expect("start", "testpmd> ", 120)
> 
> +    def handle_expected(self):
> +        """
> +        Update expected numbers to configurate file: conf/$suite_name.cfg
> +        """
> +        if load_global_setting(UPDATE_EXPECTED) == "yes":
> +            for frame_size in self.test_parameters.keys():
> +                for nb_desc in self.test_parameters[frame_size]:
> +                    self.expected_throughput[frame_size][nb_desc] =
> + round(self.throughput[frame_size][nb_desc], 3)
> +
> +    def handle_results(self):
> +        """
> +        results handled process:
> +        1, save to self.test_results
> +        2, create test results table
> +        3, save to json file for Open Lab
> +        """
> +        header = self.table_header
> +        header.append("Expected Throughput")
> +        header.append("Throughput Difference")
> +        for frame_size in self.test_parameters.keys():
> +            wirespeed = self.wirespeed(self.nic, frame_size,
> self.number_of_ports)
> +            ret_datas = {}
> +            for nb_desc in self.test_parameters[frame_size]:
> +                ret_data = {}
> +                ret_data[header[0]] = frame_size
> +                ret_data[header[1]] = nb_desc
> +                ret_data[header[2]] = "{:.3f} Mpps".format(
> +                        self.throughput[frame_size][nb_desc])
> +                ret_data[header[3]] = "{:.3f}%".format(
> +                        self.throughput[frame_size][nb_desc] * 100 / wirespeed)
> +                ret_data[header[4]] = "{:.3f} Mpps".format(
> +                        self.expected_throughput[frame_size][nb_desc])
> +                ret_data[header[5]] = "{:.3f} Mpps".format(
> +                        self.throughput[frame_size][nb_desc] -
> +                        self.expected_throughput[frame_size][nb_desc])
> +                ret_datas[nb_desc] = deepcopy(ret_data)
> +            self.test_result[frame_size] = deepcopy(ret_datas)
> +        # Create test results table
> +        self.result_table_create(header)
> +        for frame_size in self.test_parameters.keys():
> +            for nb_desc in self.test_parameters[frame_size]:
> +                table_row = list()
> +                for i in range(len(header)):
> +                    table_row.append(
> +                        self.test_result[frame_size][nb_desc][header[i]])
> +                self.result_table_add(table_row)
> +        # present test results to screen
> +        self.result_table_print()
> +        # save test results as a file
> +        if self.save_result_flag:
> +            self.save_result(self.test_result)
> +
> +    def save_result(self, data):
> +        '''
> +        Saves the test results as a separated file named with
> +        self.nic+_perf_virtio_user_pvp.json in output folder
> +        if self.save_result_flag is True
> +        '''
> +        case_name = self.running_case
> +        self.json_obj[case_name] = list()
> +        status_result = []
> +        for frame_size in self.test_parameters.keys():
> +            for nb_desc in self.test_parameters[frame_size]:
> +                row_in = self.test_result[frame_size][nb_desc]
> +                row_dict0 = dict()
> +                row_dict0['performance'] = list()
> +                row_dict0['parameters'] = list()
> +                row_dict0['parameters'] = list()
> +                result_throughput = float(row_in['Mpps'].split()[0])
> +                expected_throughput = float(row_in['Expected
> Throughput'].split()[0])
> +                # delta value and accepted tolerance in percentage
> +                delta = result_throughput - expected_throughput
> +                gap = expected_throughput * -self.gap * 0.01
> +                delta = float(delta)
> +                gap = float(gap)
> +                self.logger.info("Accept tolerance are (Mpps) %f" % gap)
> +                self.logger.info("Throughput Difference are (Mpps) %f" % delta)
> +                if result_throughput > expected_throughput + gap:
> +                    row_dict0['status'] = 'PASS'
> +                else:
> +                    row_dict0['status'] = 'FAIL'
> +                self.verify(row_dict0['status'] == 'PASS', 'The throughput is not in
> correct range')
> +                row_dict1 = dict(name="Throughput", value=result_throughput,
> unit="Mpps", delta=delta)
> +                row_dict2 = dict(name="Txd/Rxd", value=row_in["Mode/RXD-
> TXD"], unit="descriptor")
> +                row_dict3 = dict(name="frame_size", value=row_in["Frame"],
> unit="bytes")
> +                row_dict0['performance'].append(row_dict1)
> +                row_dict0['parameters'].append(row_dict2)
> +                row_dict0['parameters'].append(row_dict3)
> +                self.json_obj[case_name].append(row_dict0)
> +                status_result.append(row_dict0['status'])
> +        with open(os.path.join(rst.path2Result,
> +                        '{0:s}_{1}.json'.format(
> +                            self.nic, self.suite_name)), 'w') as fp:
> +            json.dump(self.json_obj, fp)
> +        self.verify("Fail" not in status_result, "Exceeded Gap")
> +
>      def close_all_testpmd(self):
>          """
>          close all testpmd of vhost and virtio @@ -168,130 +293,163 @@ class
> TestPVPMultiPathVhostPerformance(TestCase):
>          """
>          performance for Vhost PVP virtio 1.1 Mergeable Path.
>          """
> +        self.test_target = self.running_case
> +        self.expected_throughput =
> + self.get_suite_cfg()['expected_throughput'][self.test_target]
>          virtio_pmd_arg = {"version": "in_order=0,packed_vq=1,mrg_rxbuf=1",
>                              "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
>          self.start_vhost_testpmd()
>          self.start_virtio_testpmd(virtio_pmd_arg)
>          self.send_and_verify("virtio_1.1_mergeable on")
>          self.close_all_testpmd()
> -
> -        self.close_all_session()
> +        self.logger.info('result of all framesize result')
>          self.result_table_print()
> +        self.handle_expected()
> +        self.handle_results()
> 
>      def test_perf_vhost_single_core_virtio11_normal(self):
>          """
>          performance for Vhost PVP virtio1.1 Normal Path.
>          """
> +        self.test_target = self.running_case
> +        self.expected_throughput =
> + self.get_suite_cfg()['expected_throughput'][self.test_target]
>          virtio_pmd_arg = {"version": "in_order=0,packed_vq=1,mrg_rxbuf=0",
>                              "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
>          self.start_vhost_testpmd()
>          self.start_virtio_testpmd(virtio_pmd_arg)
>          self.send_and_verify("virtio_1.1 normal")
>          self.close_all_testpmd()
> -        self.close_all_session()
> +        self.logger.info('result of all framesize result')
>          self.result_table_print()
> +        self.handle_expected()
> +        self.handle_results()
> 
>      def test_perf_vhost_single_core_virtio11_inorder_mergeable(self):
>          """
>          performance for Vhost PVP virtio 1.1 inorder Mergeable Path.
>          """
> +        self.test_target = self.running_case
> +        self.expected_throughput =
> + self.get_suite_cfg()['expected_throughput'][self.test_target]
>          virtio_pmd_arg = {"version": "in_order=1,packed_vq=1,mrg_rxbuf=1",
>                              "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
>          self.start_vhost_testpmd()
>          self.start_virtio_testpmd(virtio_pmd_arg)
>          self.send_and_verify("virtio_1.1_inorder_mergeable on")
>          self.close_all_testpmd()
> -
> -        self.close_all_session()
> +        self.logger.info('result of all framesize result')
>          self.result_table_print()
> +        self.handle_expected()
> +        self.handle_results()
> 
>      def test_perf_vhost_single_core_virtio11_inorder_normal(self):
>          """
>          performance for Vhost PVP virtio1.1 inorder Normal Path.
>          """
> +        self.test_target = self.running_case
> +        self.expected_throughput =
> + self.get_suite_cfg()['expected_throughput'][self.test_target]
>          virtio_pmd_arg = {"version": "in_order=1,packed_vq=1,mrg_rxbuf=0",
>                              "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
>          self.start_vhost_testpmd()
>          self.start_virtio_testpmd(virtio_pmd_arg)
>          self.send_and_verify("virtio_1.1 inorder normal")
>          self.close_all_testpmd()
> -        self.close_all_session()
> +        self.logger.info('result of all framesize result')
>          self.result_table_print()
> +        self.handle_expected()
> +        self.handle_results()
> 
>      def test_perf_vhost_single_core_inorder_mergeable(self):
>          """
>          performance for Vhost PVP In_order mergeable Path.
>          """
> +        self.test_target = self.running_case
> +        self.expected_throughput =
> + self.get_suite_cfg()['expected_throughput'][self.test_target]
>          virtio_pmd_arg = {"version": "packed_vq=0,in_order=1,mrg_rxbuf=1",
>                              "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
>          self.start_vhost_testpmd()
>          self.start_virtio_testpmd(virtio_pmd_arg)
>          self.send_and_verify("inoder mergeable on")
>          self.close_all_testpmd()
> -        self.close_all_session()
> +        self.logger.info('result of all framesize result')
>          self.result_table_print()
> +        self.handle_expected()
> +        self.handle_results()
> 
>      def test_perf_vhost_single_core_inorder_no_mergeable(self):
>          """
>          performance for Vhost PVP In_order no_mergeable Path.
>          """
> +        self.test_target = self.running_case
> +        self.expected_throughput =
> + self.get_suite_cfg()['expected_throughput'][self.test_target]
>          virtio_pmd_arg = {"version": "packed_vq=0,in_order=1,mrg_rxbuf=0",
>                          "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
>          self.start_vhost_testpmd()
>          self.start_virtio_testpmd(virtio_pmd_arg)
>          self.send_and_verify("inoder mergeable off")
>          self.close_all_testpmd()
> -        self.close_all_session()
> +        self.logger.info('result of all framesize result')
>          self.result_table_print()
> +        self.handle_expected()
> +        self.handle_results()
> 
>      def test_perf_vhost_single_core_mergeable(self):
>          """
>          performance for Vhost PVP Mergeable Path.
>          """
> +        self.test_target = self.running_case
> +        self.expected_throughput =
> + self.get_suite_cfg()['expected_throughput'][self.test_target]
>          virtio_pmd_arg = {"version": "packed_vq=0,in_order=0,mrg_rxbuf=1",
>                              "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
>          self.start_vhost_testpmd()
>          self.start_virtio_testpmd(virtio_pmd_arg)
>          self.send_and_verify("mergeable on")
>          self.close_all_testpmd()
> -        self.close_all_session()
> +        self.logger.info('result of all framesize result')
>          self.result_table_print()
> +        self.handle_expected()
> +        self.handle_results()
> 
>      def test_perf_vhost_single_core_normal(self):
>          """
>          performance for Vhost PVP Normal Path.
>          """
> +        self.test_target = self.running_case
> +        self.expected_throughput =
> + self.get_suite_cfg()['expected_throughput'][self.test_target]
>          virtio_pmd_arg = {"version": "packed_vq=0,in_order=0,mrg_rxbuf=0",
>                              "path": "--tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip"}
>          self.start_vhost_testpmd()
>          self.start_virtio_testpmd(virtio_pmd_arg)
>          self.send_and_verify("normal")
>          self.close_all_testpmd()
> -        self.close_all_session()
> +        self.logger.info('result of all framesize result')
>          self.result_table_print()
> +        self.handle_expected()
> +        self.handle_results()
> 
>      def test_perf_vhost_single_core_vector_rx(self):
>          """
>          performance for Vhost PVP Vector_RX Path
>          """
> +        self.test_target = self.running_case
> +        self.expected_throughput =
> + self.get_suite_cfg()['expected_throughput'][self.test_target]
>          virtio_pmd_arg = {"version": "packed_vq=0,in_order=0,mrg_rxbuf=0",
>                              "path": "--tx-offloads=0x0"}
>          self.start_vhost_testpmd()
>          self.start_virtio_testpmd(virtio_pmd_arg)
>          self.send_and_verify("vector rx")
>          self.close_all_testpmd()
> -        self.close_all_session()
> +        self.logger.info('result of all framesize result')
>          self.result_table_print()
> +        self.handle_expected()
> +        self.handle_results()
> 
>      def tear_down(self):
>          """
>          Run after each test case.
>          """
> -        self.dut.send_expect("killall -s INT testpmd", "#")
> -        self.close_all_session()
> +        self.dut.kill_all()
> 
>      def tear_down_all(self):
>          """
>          Run after each test suite.
>          """
> -        pass
> +        self.close_all_session()
> --
> 2.7.4

Re: [dts] [PATCH V1 0/2] support pvp_multi_paths_vhost_single_core_performance run per patch

[Ma, LihongX]

Tested-by:ma,lihong<lihongx.ma@intel.com>

Regards,
Ma,lihong


-----Original Message-----
From: Ma, LihongX 
Sent: Friday, February 28, 2020 6:41 AM
To: dts@dpdk.org
Cc: Ma, LihongX <lihongx.ma@intel.com>
Subject: [dts][PATCH V1 0/2] support pvp_multi_paths_vhost_single_core_performance run per patch

*add config file and modify suite to support pvp_multi_paths_vhost_single_core_performance
check throughput value can reach expected.

lihong (2):
  conf: add config file to support per patch performance of virtio
  tests/pvp_multi_paths_vhost_single_core_performance: modify code to
    support per patch performance

 ...p_multi_paths_vhost_single_core_performance.cfg |   6 +
 ...vp_multi_paths_vhost_single_core_performance.py | 228 +++++++++++++++++----
 2 files changed, 199 insertions(+), 35 deletions(-)  create mode 100644 conf/pvp_multi_paths_vhost_single_core_performance.cfg

--
2.7.4

[dts] [PATCH V1 0/2] support pvp_multi_paths_virtio_single_core_performance run per patch

[lihong]

*add config file and modify suite to support pvp_multi_paths_virtio_single_core_performance
check throughput value can reach expected

lihong (2):
  conf: add config file to support per patch performance of virtio
  tests/pvp_multi_paths_virtio_single_core_performance: modify code to
    support per patch performance

 ..._multi_paths_virtio_single_core_performance.cfg |   6 +
 ...p_multi_paths_virtio_single_core_performance.py | 214 ++++++++++++++++++---
 2 files changed, 198 insertions(+), 22 deletions(-)
 create mode 100644 conf/pvp_multi_paths_virtio_single_core_performance.cfg

-- 
2.7.4

[dts] [PATCH V1 1/2] conf: add config file to support per patch performance of virtio

[lihong]

add config file pvp_multi_paths_virtio_single_core_performance.cfg to
support suite run per patch performance

Signed-off-by: lihong <lihongx.ma@intel.com>
---
 conf/pvp_multi_paths_virtio_single_core_performance.cfg | 6 ++++++
 1 file changed, 6 insertions(+)
 create mode 100644 conf/pvp_multi_paths_virtio_single_core_performance.cfg

diff --git a/conf/pvp_multi_paths_virtio_single_core_performance.cfg b/conf/pvp_multi_paths_virtio_single_core_performance.cfg
new file mode 100644
index 0000000..f7703a3
--- /dev/null
+++ b/conf/pvp_multi_paths_virtio_single_core_performance.cfg
@@ -0,0 +1,6 @@
+[suite]
+update_expected = True
+test_parameters = {64: [1024], 1518: [1024]}
+test_duration = 60
+accepted_tolerance = 2
+expected_throughput = {'test_perf_virtio_single_core_virtio11_mergeable': {64: {1024: 0.0}, 1518: {1024: 0.0}}, 'test_perf_virtio_single_core_virtio11_normal': {64: {1024: 0.0}, 1518: {1024: 0.0}}, 'test_perf_virtio_single_core_virtio11_inorder_mergeable': {64: {1024: 0.0}, 1518: {1024: 0.0}}, 'test_perf_virtio_single_core_virtio11_inorder_normal': {64: {1024: 0.0}, 1518: {1024: 0.0}}, 'test_perf_virtio_single_core_inorder_mergeable': {64: {1024: 0.0}, 1518: {1024: 0.0}}, 'test_perf_virtio_single_core_inorder_no_mergeable': {64: {1024: 0.0}, 1518: {1024: 0.0}}, 'test_perf_virtio_single_core_mergeable': {64: {1024: 0.0}, 1518: {1024: 0.0}}, 'test_perf_virtio_single_core_normal': {64: {1024: 0.0}, 1518: {1024: 0.0}}, 'test_perf_virtio_single_core_vector_rx': {64: {1024: 0.0}, 1518: {1024: 0.0}}}
-- 
2.7.4

Re: [dts] [PATCH V1 1/2] conf: add config file to support per patch performance of virtio

[Ma, LihongX]

Tested-by:ma,lihong<lihongx.ma@intel.com>

Regards,
Ma,lihong


-----Original Message-----
From: Ma, LihongX 
Sent: Friday, February 28, 2020 2:52 AM
To: dts@dpdk.org
Cc: Ma, LihongX <lihongx.ma@intel.com>
Subject: [dts][PATCH V1 1/2] conf: add config file to support per patch performance of virtio

add config file pvp_multi_paths_virtio_single_core_performance.cfg to support suite run per patch performance

Signed-off-by: lihong <lihongx.ma@intel.com>
---
 conf/pvp_multi_paths_virtio_single_core_performance.cfg | 6 ++++++
 1 file changed, 6 insertions(+)
 create mode 100644 conf/pvp_multi_paths_virtio_single_core_performance.cfg

diff --git a/conf/pvp_multi_paths_virtio_single_core_performance.cfg b/conf/pvp_multi_paths_virtio_single_core_performance.cfg
new file mode 100644
index 0000000..f7703a3
--- /dev/null
+++ b/conf/pvp_multi_paths_virtio_single_core_performance.cfg
@@ -0,0 +1,6 @@
+[suite]
+update_expected = True
+test_parameters = {64: [1024], 1518: [1024]} test_duration = 60 
+accepted_tolerance = 2 expected_throughput = 
+{'test_perf_virtio_single_core_virtio11_mergeable': {64: {1024: 0.0}, 
+1518: {1024: 0.0}}, 'test_perf_virtio_single_core_virtio11_normal': 
+{64: {1024: 0.0}, 1518: {1024: 0.0}}, 
+'test_perf_virtio_single_core_virtio11_inorder_mergeable': {64: {1024: 
+0.0}, 1518: {1024: 0.0}}, 
+'test_perf_virtio_single_core_virtio11_inorder_normal': {64: {1024: 
+0.0}, 1518: {1024: 0.0}}, 
+'test_perf_virtio_single_core_inorder_mergeable': {64: {1024: 0.0}, 
+1518: {1024: 0.0}}, 
+'test_perf_virtio_single_core_inorder_no_mergeable': {64: {1024: 0.0}, 
+1518: {1024: 0.0}}, 'test_perf_virtio_single_core_mergeable': {64: 
+{1024: 0.0}, 1518: {1024: 0.0}}, 'test_perf_virtio_single_core_normal': 
+{64: {1024: 0.0}, 1518: {1024: 0.0}}, 
+'test_perf_virtio_single_core_vector_rx': {64: {1024: 0.0}, 1518: 
+{1024: 0.0}}}
--
2.7.4

[dts] [PATCH V1 0/2] support pvp_multi_paths_performance run per patch

[lihong]

*add config file and modify suite to support pvp_multi_paths_performance
to check throughput can reach expected.

lihong (2):
  conf: add config file to support per patch performance of virtio
  tests/pvp_multi_paths_performance: modify code to support per patch
    performance

 conf/pvp_multi_paths_performance.cfg           |   6 +
 tests/TestSuite_pvp_multi_paths_performance.py | 218 ++++++++++++++++++++++---
 2 files changed, 199 insertions(+), 25 deletions(-)
 create mode 100644 conf/pvp_multi_paths_performance.cfg

-- 
2.7.4

[dts] [PATCH V1 1/2] conf: add config file to support per patch performance of virtio

[lihong]

add config file for pvp_multi_paths_performance to test per patch performance

Signed-off-by: lihong <lihongx.ma@intel.com>
---
 conf/pvp_multi_paths_performance.cfg | 6 ++++++
 1 file changed, 6 insertions(+)
 create mode 100644 conf/pvp_multi_paths_performance.cfg

diff --git a/conf/pvp_multi_paths_performance.cfg b/conf/pvp_multi_paths_performance.cfg
new file mode 100644
index 0000000..a725abb
--- /dev/null
+++ b/conf/pvp_multi_paths_performance.cfg
@@ -0,0 +1,6 @@
+[suite]
+update_expected = True
+test_parameters = {64: [1024],1518: [1024]}
+test_duration = 60
+accepted_tolerance = 2
+expected_throughput = {'test_perf_pvp_virtio11_mergeable': {64: {1024: 0.00}, 1518: {1024: 0.00}}, 'test_perf_pvp_virtio11_normal': {64: {1024: 0.00}, 1518: {1024: 0.00}}, 'test_perf_pvp_virtio11_inorder_mergeable': {64: {1024: 0.00}, 1518: {1024: 0.00}}, 'test_perf_pvp_virtio11_inorder_normal': {64: {1024: 0.00}, 1518: {1024: 0.00}}, 'test_perf_pvp_inorder_mergeable': {64: {1024: 0.00}, 1518: {1024: 0.00}}, 'test_perf_pvp_inorder_no_mergeable': {64: {1024: 0.00}, 1518: {1024: 0.00}},'test_perf_pvp_mergeable': {64: {1024: 0.00}, 1518: {1024: 0.00}},'test_perf_pvp_normal': {64: {1024: 0.00}, 1518: {1024: 0.00}},'test_perf_pvp_vector_rx': {64: {1024: 0.00}, 1518: {1024: 0.00}},}
-- 
2.7.4

Re: [dts] [PATCH V1 1/2] conf: add config file to support per patch performance of virtio

[Ma, LihongX]

Tested-by:ma,lihong<lihongx.ma@intel.com>

Regards,
Ma,lihong


-----Original Message-----
From: Ma, LihongX 
Sent: Friday, February 28, 2020 2:36 AM
To: dts@dpdk.org
Cc: Ma, LihongX <lihongx.ma@intel.com>
Subject: [dts][PATCH V1 1/2] conf: add config file to support per patch performance of virtio

add config file for pvp_multi_paths_performance to test per patch performance

Signed-off-by: lihong <lihongx.ma@intel.com>
---
 conf/pvp_multi_paths_performance.cfg | 6 ++++++
 1 file changed, 6 insertions(+)
 create mode 100644 conf/pvp_multi_paths_performance.cfg

diff --git a/conf/pvp_multi_paths_performance.cfg b/conf/pvp_multi_paths_performance.cfg
new file mode 100644
index 0000000..a725abb
--- /dev/null
+++ b/conf/pvp_multi_paths_performance.cfg
@@ -0,0 +1,6 @@
+[suite]
+update_expected = True
+test_parameters = {64: [1024],1518: [1024]} test_duration = 60 
+accepted_tolerance = 2 expected_throughput = 
+{'test_perf_pvp_virtio11_mergeable': {64: {1024: 0.00}, 1518: {1024: 
+0.00}}, 'test_perf_pvp_virtio11_normal': {64: {1024: 0.00}, 1518: 
+{1024: 0.00}}, 'test_perf_pvp_virtio11_inorder_mergeable': {64: {1024: 
+0.00}, 1518: {1024: 0.00}}, 'test_perf_pvp_virtio11_inorder_normal': 
+{64: {1024: 0.00}, 1518: {1024: 0.00}}, 
+'test_perf_pvp_inorder_mergeable': {64: {1024: 0.00}, 1518: {1024: 
+0.00}}, 'test_perf_pvp_inorder_no_mergeable': {64: {1024: 0.00}, 1518: 
+{1024: 0.00}},'test_perf_pvp_mergeable': {64: {1024: 0.00}, 1518: 
+{1024: 0.00}},'test_perf_pvp_normal': {64: {1024: 0.00}, 1518: {1024: 
+0.00}},'test_perf_pvp_vector_rx': {64: {1024: 0.00}, 1518: {1024: 
+0.00}},}
--
2.7.4