From: Lijuan Tu <lijuan.tu@intel.com>
To: "zhao,meijuan" <meijuanx.zhao@intel.com>, dts@dpdk.org
Subject: Re: [dts] [PATCH V1] tests/sriov kvm : add support vfio
Date: Mon, 15 Oct 2018 21:46:31 +0800 [thread overview]
Message-ID: <eca3e60f-cec3-fdef-24d8-d0fe7923fac2@intel.com> (raw)
In-Reply-To: <1539242376-11080-1-git-send-email-meijuanx.zhao@intel.com>
Applied with comments changed, thanks.
On 2018年10月11日 15:19, zhao,meijuan wrote:
> add support vfio
>
> Signed-off-by: zhao,meijuan <meijuanx.zhao@intel.com>
> ---
> tests/TestSuite_sriov_kvm.py | 32 +++++++++++++++++++++-----------
> 1 file changed, 21 insertions(+), 11 deletions(-)
>
> diff --git a/tests/TestSuite_sriov_kvm.py b/tests/TestSuite_sriov_kvm.py
> index 39e6af3..79d2989 100644
> --- a/tests/TestSuite_sriov_kvm.py
> +++ b/tests/TestSuite_sriov_kvm.py
> @@ -24,6 +24,8 @@ VM_CORES_MASK = 'all'
>
> class TestSriovKvm(TestCase):
>
> + supported_vf_driver = ['pci-stub', 'vfio-pci']
> +
> def set_up_all(self):
> # port_mirror_ref = {port_id: rule_id_list}
> # rule_id should be integer, and should be increased based on
> @@ -40,6 +42,16 @@ class TestSriovKvm(TestCase):
> self.vm2 = None
> self.vm3 = None
>
> + self.vf_driver = self.get_suite_cfg()['vf_driver']
> + if self.vf_driver is None:
> + self.vf_driver = 'pci-stub'
> + self.verify(self.vf_driver in self.supported_vf_driver, "Unspported vf driver")
> + if self.vf_driver == 'pci-stub':
> + self.vf_assign_method = self.vf_assign_method
> + else:
> + self.vf_assign_method = 'vfio-pci'
> + self.dut.send_expect('modprobe vfio-pci', '#')
> +
> def set_up(self):
> self.setup_2vm_2pf_env_flag = 0
>
> @@ -297,12 +309,12 @@ class TestSriovKvm(TestCase):
>
> # set up VM0 ENV
> self.vm0 = VM(self.dut, 'vm0', 'sriov_kvm')
> - self.vm0.set_vm_device(driver='pci-assign', **vf0_prop)
> + self.vm0.set_vm_device(driver=self.vf_assign_method, **vf0_prop)
> self.vm_dut_0 = self.vm0.start()
>
> # set up VM1 ENV
> self.vm1 = VM(self.dut, 'vm1', 'sriov_kvm')
> - self.vm1.set_vm_device(driver='pci-assign', **vf1_prop)
> + self.vm1.set_vm_device(driver=self.vf_assign_method, **vf1_prop)
> self.vm_dut_1 = self.vm1.start()
>
> self.setup_2vm_2vf_env_flag = 1
> @@ -327,11 +339,10 @@ class TestSriovKvm(TestCase):
> self.used_dut_port, 2, driver=driver)
> self.sriov_vfs_port = self.dut.ports_info[
> self.used_dut_port]['vfs_port']
> -
> try:
>
> for port in self.sriov_vfs_port:
> - port.bind_driver('pci-stub')
> + port.bind_driver(self.vf_driver)
>
> time.sleep(1)
>
> @@ -356,14 +367,14 @@ class TestSriovKvm(TestCase):
>
> # set up VM0 ENV
> self.vm0 = VM(self.dut, 'vm0', 'sriov_kvm')
> - self.vm0.set_vm_device(driver='pci-assign', **vf0_prop)
> + self.vm0.set_vm_device(driver=self.vf_assign_method, **vf0_prop)
> self.vm_dut_0 = self.vm0.start()
> if self.vm_dut_0 is None:
> raise Exception("Set up VM0 ENV failed!")
>
> # set up VM1 ENV
> self.vm1 = VM(self.dut, 'vm1', 'sriov_kvm')
> - self.vm1.set_vm_device(driver='pci-assign', **vf1_prop)
> + self.vm1.set_vm_device(driver=self.vf_assign_method, **vf1_prop)
> self.vm_dut_1 = self.vm1.start()
> if self.vm_dut_1 is None:
> raise Exception("Set up VM1 ENV failed!")
> @@ -436,25 +447,25 @@ class TestSriovKvm(TestCase):
> "1S/2C/2T", eal_param=eal_param)
>
> self.vm0 = VM(self.dut, 'vm0', 'sriov_kvm')
> - self.vm0.set_vm_device(driver='pci-assign', **vf0_prop)
> + self.vm0.set_vm_device(driver=self.vf_assign_method, **vf0_prop)
> self.vm_dut_0 = self.vm0.start()
> if self.vm_dut_0 is None:
> raise Exception("Set up VM0 ENV failed!")
>
> self.vm1 = VM(self.dut, 'vm1', 'sriov_kvm')
> - self.vm1.set_vm_device(driver='pci-assign', **vf1_prop)
> + self.vm1.set_vm_device(driver=self.vf_assign_method, **vf1_prop)
> self.vm_dut_1 = self.vm1.start()
> if self.vm_dut_1 is None:
> raise Exception("Set up VM1 ENV failed!")
>
> self.vm2 = VM(self.dut, 'vm2', 'sriov_kvm')
> - self.vm2.set_vm_device(driver='pci-assign', **vf2_prop)
> + self.vm2.set_vm_device(driver=self.vf_assign_method, **vf2_prop)
> self.vm_dut_2 = self.vm2.start()
> if self.vm_dut_2 is None:
> raise Exception("Set up VM2 ENV failed!")
>
> self.vm3 = VM(self.dut, 'vm3', 'sriov_kvm')
> - self.vm3.set_vm_device(driver='pci-assign', **vf3_prop)
> + self.vm3.set_vm_device(driver=self.vf_assign_method, **vf3_prop)
> self.vm_dut_3 = self.vm3.start()
> if self.vm_dut_3 is None:
> raise Exception("Set up VM3 ENV failed!")
> @@ -1253,7 +1264,6 @@ class TestSriovKvm(TestCase):
> def test_two_vms_negative_input_commands(self):
> self.setup_2vm_2vf_env()
> self.setup_two_vm_common_prerequisite()
> -
> for command in ["set port 0 vf 65 tx on",
> "set port 2 vf -1 tx off",
> "set port 0 vf 0 rx oneee",
prev parent reply other threads:[~2018-10-15 5:18 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-11 7:19 zhao,meijuan
2018-10-15 13:46 ` Lijuan Tu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=eca3e60f-cec3-fdef-24d8-d0fe7923fac2@intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=meijuanx.zhao@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).