* [spp] [PATCH v2 0/5] updates for catching up DPDK20.02
[not found] <20200529110932.26508-1-x-fn-spp-ml@ntt-tx.co.jp>
@ 2020-06-24 4:47 ` x-fn-spp-ml
2020-06-30 6:48 ` Itsuro ODA
2020-07-16 15:56 ` Yasufumi Ogawa
2020-06-24 4:47 ` [spp] [PATCH v2 1/5] docs: remove unnecessary usage of ethtool x-fn-spp-ml
` (4 subsequent siblings)
5 siblings, 2 replies; 8+ messages in thread
From: x-fn-spp-ml @ 2020-06-24 4:47 UTC (permalink / raw)
To: spp, yasufum.o
From: Hideyuki Yamashita <yamashita.hideyuki@ntt-tx.co.jp>
v2:
* separate configuration of 'igb_uio' from that of 'PCAP'
* move consideration of NUMA node to performance section
Hideyuki Yamashita (5):
docs: remove unnecessary usage of ethtool
docs: resolve broken reference link
docs: catch up updates in dpdk-20.02
makefile: change default build target
docs: add note regarding NUMA configuration
GNUmakefile | 2 +-
docs/guides/design/spp.rst | 4 +-
docs/guides/gsg/howto_use.rst | 27 +++++-------
docs/guides/gsg/install.rst | 11 ++++-
docs/guides/gsg/performance_opt.rst | 55 +++++++++++++++++++++++++
docs/guides/tools/sppc/app_launcher.rst | 2 +-
docs/guides/usecases/spp_mirror.rst | 10 ++---
docs/guides/usecases/spp_pcap.rst | 4 +-
docs/guides/usecases/spp_vf.rst | 8 ++--
9 files changed, 90 insertions(+), 33 deletions(-)
--
2.17.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* [spp] [PATCH v2 1/5] docs: remove unnecessary usage of ethtool
[not found] <20200529110932.26508-1-x-fn-spp-ml@ntt-tx.co.jp>
2020-06-24 4:47 ` [spp] [PATCH v2 0/5] updates for catching up DPDK20.02 x-fn-spp-ml
@ 2020-06-24 4:47 ` x-fn-spp-ml
2020-06-24 4:47 ` [spp] [PATCH v2 2/5] docs: resolve broken reference link x-fn-spp-ml
` (3 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: x-fn-spp-ml @ 2020-06-24 4:47 UTC (permalink / raw)
To: spp, yasufum.o
From: Hideyuki Yamashita <yamashita.hideyuki@ntt-tx.co.jp>
This patch removes unnecessary usage of ethtool on host side
in how_to_use section.
Signed-off-by: Hideyuki Yamashita <yamashita.hideyuki@ntt-tx.co.jp>
Signed-off-by: Naoki Takada <ntakada14@gmail.com>
---
docs/guides/gsg/howto_use.rst | 7 -------
1 file changed, 7 deletions(-)
diff --git a/docs/guides/gsg/howto_use.rst b/docs/guides/gsg/howto_use.rst
index 2e4be2f..a57813d 100644
--- a/docs/guides/gsg/howto_use.rst
+++ b/docs/guides/gsg/howto_use.rst
@@ -1035,10 +1035,3 @@ On the VMs, add an interface and disable offload.
# Disable offload
$ sudo ethtool -K IF_NAME tx off
-
-On host machine, it is also required to disable offload.
-
-.. code-block:: console
-
- # Disable offload for VM
- $ sudo ethtool -K IF_NAME tx off
--
2.17.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* [spp] [PATCH v2 2/5] docs: resolve broken reference link
[not found] <20200529110932.26508-1-x-fn-spp-ml@ntt-tx.co.jp>
2020-06-24 4:47 ` [spp] [PATCH v2 0/5] updates for catching up DPDK20.02 x-fn-spp-ml
2020-06-24 4:47 ` [spp] [PATCH v2 1/5] docs: remove unnecessary usage of ethtool x-fn-spp-ml
@ 2020-06-24 4:47 ` x-fn-spp-ml
2020-06-24 4:47 ` [spp] [PATCH v2 3/5] docs: catch up updates in dpdk-20.02 x-fn-spp-ml
` (2 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: x-fn-spp-ml @ 2020-06-24 4:47 UTC (permalink / raw)
To: spp, yasufum.o
From: Hideyuki Yamashita <yamashita.hideyuki@ntt-tx.co.jp>
This patch resolves broken link in reference section.
This is pointed out by DPDK bugzilla.
https://bugs.dpdk.org/show_bug.cgi?id=441
Signed-off-by: Hideyuki Yamashita <yamashita.hideyuki@ntt-tx.co.jp>
Signed-off-by: Naoki Takada <ntakada14@gmail.com>
---
docs/guides/design/spp.rst | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/guides/design/spp.rst b/docs/guides/design/spp.rst
index 2c3ee46..43da0d4 100644
--- a/docs/guides/design/spp.rst
+++ b/docs/guides/design/spp.rst
@@ -27,11 +27,11 @@ SPP primary process is responsible for resource management, for example,
initializing ports, mbufs or shared memory. On the other hand,
secondary processes of ``spp_nfv`` are working for forwarding
`[1]
-<https://dpdksummit.com/Archive/pdf/2017USA/Implementation%20and%20Testing%20of%20Soft%20Patch%20Panel.pdf>`_.
+<https://www.dpdk.org/wp-content/uploads/sites/35/2018/06/Implementation-and-Testing-of-Soft-Patch-Panel.pdf>`_.
Reference
---------
* [1] `Implementation and Testing of Soft Patch Panel
- <https://dpdksummit.com/Archive/pdf/2017USA/Implementation%20and%20Testing%20of%20Soft%20Patch%20Panel.pdf>`_
+ <https://www.dpdk.org/wp-content/uploads/sites/35/2018/06/Implementation-and-Testing-of-Soft-Patch-Panel.pdf>`_
--
2.17.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* [spp] [PATCH v2 3/5] docs: catch up updates in dpdk-20.02
[not found] <20200529110932.26508-1-x-fn-spp-ml@ntt-tx.co.jp>
` (2 preceding siblings ...)
2020-06-24 4:47 ` [spp] [PATCH v2 2/5] docs: resolve broken reference link x-fn-spp-ml
@ 2020-06-24 4:47 ` x-fn-spp-ml
2020-06-24 4:47 ` [spp] [PATCH v2 4/5] makefile: change default build target x-fn-spp-ml
2020-06-24 4:47 ` [spp] [PATCH v2 5/5] docs: add note regarding NUMA configuration x-fn-spp-ml
5 siblings, 0 replies; 8+ messages in thread
From: x-fn-spp-ml @ 2020-06-24 4:47 UTC (permalink / raw)
To: spp, yasufum.o
From: Hideyuki Yamashita <yamashita.hideyuki@ntt-tx.co.jp>
This patch catch up the following updates in dpdk-20.02.
- new config to generate IGB_UIO module
- change supported target from x86_64-native-linuxapp-gcc to
x86_64_native-linux-gcc
Signed-off-by: Hideyuki Yamashita <yamashita.hideyuki@ntt-tx.co.jp>
Signed-off-by: Naoki Takada <ntakada14@gmail.com>
---
docs/guides/gsg/howto_use.rst | 20 ++++++++++----------
docs/guides/gsg/install.rst | 11 ++++++++++-
docs/guides/tools/sppc/app_launcher.rst | 2 +-
docs/guides/usecases/spp_mirror.rst | 10 +++++-----
docs/guides/usecases/spp_pcap.rst | 4 ++--
docs/guides/usecases/spp_vf.rst | 8 ++++----
6 files changed, 32 insertions(+), 23 deletions(-)
diff --git a/docs/guides/gsg/howto_use.rst b/docs/guides/gsg/howto_use.rst
index a57813d..f182198 100644
--- a/docs/guides/gsg/howto_use.rst
+++ b/docs/guides/gsg/howto_use.rst
@@ -120,7 +120,7 @@ It is same as following options launching from terminal.
.. code-block:: console
- $ sudo ./src/nfv/x86_64-native-linuxapp-gcc/spp_nfv \
+ $ sudo ./src/nfv/x86_64-native-linux-gcc/spp_nfv \
-l 1,2 -n 4 -m 512 \
--proc-type secondary \
--file-prefix spp \
@@ -383,7 +383,7 @@ To launch SPP primary, run ``spp_primary`` with specific options.
.. code-block:: console
# terminal 3
- $ sudo ./src/primary/x86_64-native-linuxapp-gcc/spp_primary \
+ $ sudo ./src/primary/x86_64-native-linux-gcc/spp_primary \
-l 0 -n 4 \
--socket-mem 512,512 \
--huge-dir /dev/hugepages \
@@ -430,7 +430,7 @@ Here is an example for launching ``spp_primary`` with monitor thread.
.. code-block:: console
# terminal 3
- $ sudo ./src/primary/x86_64-native-linuxapp-gcc/spp_primary \
+ $ sudo ./src/primary/x86_64-native-linux-gcc/spp_primary \
-l 0-1 -n 4 \ # two lcores
--socket-mem 512,512 \
--huge-dir /dev/hugepages \
@@ -453,7 +453,7 @@ secondary processes.
.. code-block:: console
# terminal 3
- $ sudo ./src/primary/x86_64-native-linuxapp-gcc/spp_primary \
+ $ sudo ./src/primary/x86_64-native-linux-gcc/spp_primary \
-l 0 -n 4 \
--socket-mem 512,512 \
--huge-dir=/dev/hugepages \
@@ -473,7 +473,7 @@ with white list option.
.. code-block:: console
# terminal 3
- $ sudo ./src/primary/x86_64-native-linuxapp-gcc/spp_primary \
+ $ sudo ./src/primary/x86_64-native-linux-gcc/spp_primary \
-l 0 -n 4 \
-w 0000:03:00.0,dv_flow_en=1 \
-w 0000:04:00.0,dv_flow_en=1 \
@@ -524,7 +524,7 @@ as ``l2fwd``.
# terminal 4
$ cd /path/to/spp
- $ sudo ./src/nfv/x86_64-native-linuxapp-gcc/spp_nfv \
+ $ sudo ./src/nfv/x86_64-native-linux-gcc/spp_nfv \
-l 2-3 -n 4 \
--proc-type secondary \
--file-prefix $SPP_FILE_PREFIX \
@@ -559,7 +559,7 @@ spp_vf
.. code-block:: console
- $ sudo ./src/vf/x86_64-native-linuxapp-gcc/spp_vf \
+ $ sudo ./src/vf/x86_64-native-linux-gcc/spp_vf \
-l 2-13 -n 4 \
--proc-type secondary \
--file-prefix $SPP_FILE_PREFIX \
@@ -584,7 +584,7 @@ and options are same as ``spp_vf``.
.. code-block:: console
- $ sudo ./src/mirror/x86_64-native-linuxapp-gcc/spp_mirror \
+ $ sudo ./src/mirror/x86_64-native-linux-gcc/spp_mirror \
-l 2,3 -n 4 \
--proc-type secondary \
--file-prefix $SPP_FILE_PREFIX \
@@ -611,7 +611,7 @@ SPP provides ``spp_pcap`` for capturing comparatively heavy traffic.
.. code-block:: console
- $ sudo ./src/pcap/x86_64-native-linuxapp-gcc/spp_pcap \
+ $ sudo ./src/pcap/x86_64-native-linux-gcc/spp_pcap \
-l 2-5 -n 4 \
--proc-type secondary \
--file-prefix $SPP_FILE_PREFIX \
@@ -828,7 +828,7 @@ launching DPDK processes.
# terminal 6
$ ssh user@192.168.122.100
$ cd /path/to/spp
- $ sudo ./src/primary/x86_64-native-linuxapp-gcc/spp_primary \
+ $ sudo ./src/primary/x86_64-native-linux-gcc/spp_primary \
-l 1 -n 4 \
-m 1024 \
--huge-dir=/dev/hugepages \
diff --git a/docs/guides/gsg/install.rst b/docs/guides/gsg/install.rst
index 2abf330..102d61e 100644
--- a/docs/guides/gsg/install.rst
+++ b/docs/guides/gsg/install.rst
@@ -129,6 +129,15 @@ config file ``common_base`` should be changed to ``y`` to enable PCAP.
...
CONFIG_RTE_PORT_PCAP=y
+Compilation of igb_uio module is disabled by default in DPDK configuration.
+``CONFIG_RTE_EAL_IGB_UIO`` defined in config file ``common_base`` should be
+changed to ``y`` to enable compilation of igb_uio.
+
+.. code-block:: console
+
+ # dpdk/config/common_base
+ CONFIG_RTE_EAL_IGB_UIO=y
+
If you use MLX5 NIC, ``CONFIG_RTE_LIBRTE_MLX5_PMD`` defined in
config file ``common_base`` should be changed to ``y``.
@@ -143,7 +152,7 @@ Compile DPDK with target environment.
$ cd dpdk
$ export RTE_SDK=$(pwd)
- $ export RTE_TARGET=x86_64-native-linuxapp-gcc # depends on your env
+ $ export RTE_TARGET=x86_64-native-linux-gcc # depends on your env
$ make install T=$RTE_TARGET
Pyhton
diff --git a/docs/guides/tools/sppc/app_launcher.rst b/docs/guides/tools/sppc/app_launcher.rst
index b368a15..40f40ca 100644
--- a/docs/guides/tools/sppc/app_launcher.rst
+++ b/docs/guides/tools/sppc/app_launcher.rst
@@ -831,7 +831,7 @@ and three vhost interfaces.
sudo docker run \
...
sppc/pktgen-ubuntu:latest \
- /root/dpdk/../pktgen-dpdk/app/x86_64-native-linuxapp-gcc/pktgen \
+ /root/dpdk/../pktgen-dpdk/app/x86_64-native-linux-gcc/pktgen \
-l 8-14 \
...
-- \
diff --git a/docs/guides/usecases/spp_mirror.rst b/docs/guides/usecases/spp_mirror.rst
index 4164a16..00d6eef 100644
--- a/docs/guides/usecases/spp_mirror.rst
+++ b/docs/guides/usecases/spp_mirror.rst
@@ -70,7 +70,7 @@ three ports ``-p 0x07``.
.. code-block:: console
# terminal 3
- $ sudo ./src/primary/x86_64-native-linuxapp-gcc/spp_primary \
+ $ sudo ./src/primary/x86_64-native-linux-gcc/spp_primary \
-l 1 -n 4 \
--socket-mem 512,512 \
--huge-dir=/run/hugepages/kvm \
@@ -87,7 +87,7 @@ Run secondary process ``spp_mirror``.
.. code-block:: console
# terminal 4
- $ sudo ./src/mirror/x86_64-native-linuxapp-gcc/app/spp_mirror \
+ $ sudo ./src/mirror/x86_64-native-linux-gcc/app/spp_mirror \
-l 0,2 -n 4 \
--proc-type secondary \
-- \
@@ -230,7 +230,7 @@ Start spp_primary with core list option ``-l 1``.
# terminal 3
# Type the following in different terminal
- $ sudo ./src/primary/x86_64-native-linuxapp-gcc/spp_primary \
+ $ sudo ./src/primary/x86_64-native-linux-gcc/spp_primary \
-l 1 -n 4 \
--socket-mem 512,512 \
--huge-dir=/run/hugepages/kvm \
@@ -261,7 +261,7 @@ Launch ``VM1``, ``VM2`` and ``spp_vf`` with core list ``-l 0,2-8``.
.. code-block:: console
# terminal 4
- $ sudo ./src/vf/x86_64-native-linuxapp-gcc/spp_vf \
+ $ sudo ./src/vf/x86_64-native-linux-gcc/spp_vf \
-l 0,2-8 \
-n 4 --proc-type secondary \
-- \
@@ -329,7 +329,7 @@ Run ``spp_mirror``.
.. code-block:: console
# terminal 6
- $ sudo ./src/mirror/x86_64-native-linuxapp-gcc/app/spp_mirror \
+ $ sudo ./src/mirror/x86_64-native-linux-gcc/app/spp_mirror \
-l 0,9 \
-n 4 --proc-type secondary \
-- \
diff --git a/docs/guides/usecases/spp_pcap.rst b/docs/guides/usecases/spp_pcap.rst
index 543538d..e94cfc4 100644
--- a/docs/guides/usecases/spp_pcap.rst
+++ b/docs/guides/usecases/spp_pcap.rst
@@ -59,7 +59,7 @@ Then, run ``spp_primary`` with one physical port.
.. code-block:: console
# terminal 3
- $ sudo ./src/primary/x86_64-native-linuxapp-gcc/spp_primary \
+ $ sudo ./src/primary/x86_64-native-linux-gcc/spp_primary \
-l 0 -n 4 \
--socket-mem 512,512 \
--huge-dir /run/hugepages/kvm \
@@ -79,7 +79,7 @@ writer threads.
.. code-block:: console
# terminal 4
- $ sudo ./src/pcap/x86_64-native-linuxapp-gcc/spp_pcap \
+ $ sudo ./src/pcap/x86_64-native-linux-gcc/spp_pcap \
-l 1-6 -n 4 --proc-type=secondary \
-- \
--client-id 1 -s 192.168.1.100:6666 \
diff --git a/docs/guides/usecases/spp_vf.rst b/docs/guides/usecases/spp_vf.rst
index c45feb8..6056636 100644
--- a/docs/guides/usecases/spp_vf.rst
+++ b/docs/guides/usecases/spp_vf.rst
@@ -52,7 +52,7 @@ Launch ``spp-ctl`` and SPP CLI before primary and secondary processes.
.. code-block:: console
# terminal 3
- $ sudo ./src/primary/x86_64-native-linuxapp-gcc/spp_primary \
+ $ sudo ./src/primary/x86_64-native-linux-gcc/spp_primary \
-l 1 -n 4 \
--socket-mem 512,512 \
--huge-dir=/run/hugepages/kvm \
@@ -68,7 +68,7 @@ worker threads.
.. code-block:: console
# terminal 4
- $ sudo ./src/vf/x86_64-native-linuxapp-gcc/spp_vf \
+ $ sudo ./src/vf/x86_64-native-linux-gcc/spp_vf \
-l 2-6 \
-n 4 --proc-type=secondary \
-- \
@@ -281,7 +281,7 @@ Launch ``spp-ctl`` and SPP CLI before primary and secondary processes.
.. code-block:: console
# terminal 3
- $ sudo ./src/primary/x86_64-native-linuxapp-gcc/spp_primary \
+ $ sudo ./src/primary/x86_64-native-linux-gcc/spp_primary \
-l 1 -n 4 \
--socket-mem 512,512 \
--huge-dir=/run/hugepages/kvm \
@@ -295,7 +295,7 @@ to use twelve lcores.
.. code-block:: console
# terminal 4
- $ sudo ./src/vf/x86_64-native-linuxapp-gcc/spp_vf \
+ $ sudo ./src/vf/x86_64-native-linux-gcc/spp_vf \
-l 0,2-13 \
-n 4 --proc-type=secondary \
-- \
--
2.17.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* [spp] [PATCH v2 4/5] makefile: change default build target
[not found] <20200529110932.26508-1-x-fn-spp-ml@ntt-tx.co.jp>
` (3 preceding siblings ...)
2020-06-24 4:47 ` [spp] [PATCH v2 3/5] docs: catch up updates in dpdk-20.02 x-fn-spp-ml
@ 2020-06-24 4:47 ` x-fn-spp-ml
2020-06-24 4:47 ` [spp] [PATCH v2 5/5] docs: add note regarding NUMA configuration x-fn-spp-ml
5 siblings, 0 replies; 8+ messages in thread
From: x-fn-spp-ml @ 2020-06-24 4:47 UTC (permalink / raw)
To: spp, yasufum.o
From: Hideyuki Yamashita <yamashita.hideyuki@ntt-tx.co.jp>
This patch changes default build target from x86_64-native-linuxapp-gcc
to x86_64-native-linux-gcc.
From the following link, x86_64-native-linuxapp-gcc is not supported.
https://doc.dpdk.org/guides-20.02/linux_gsg/
build_dpdk.html#compiling-and-installing-dpdk-system-wide
Signed-off-by: Hideyuki Yamashita <yamashita.hideyuki@ntt-tx.co.jp>
Signed-off-by: Naoki Takada <ntakada14@gmail.com>
---
GNUmakefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/GNUmakefile b/GNUmakefile
index 0db3aaa..555dbb3 100644
--- a/GNUmakefile
+++ b/GNUmakefile
@@ -5,7 +5,7 @@ VERSION := 19.11
ifneq ($(RTE_SDK),)
# Default target, can be overriden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
--
2.17.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* [spp] [PATCH v2 5/5] docs: add note regarding NUMA configuration
[not found] <20200529110932.26508-1-x-fn-spp-ml@ntt-tx.co.jp>
` (4 preceding siblings ...)
2020-06-24 4:47 ` [spp] [PATCH v2 4/5] makefile: change default build target x-fn-spp-ml
@ 2020-06-24 4:47 ` x-fn-spp-ml
5 siblings, 0 replies; 8+ messages in thread
From: x-fn-spp-ml @ 2020-06-24 4:47 UTC (permalink / raw)
To: spp, yasufum.o
From: Hideyuki Yamashita <yamashita.hideyuki@ntt-tx.co.jp>
This patch adds new notes for NUMA configuration when starting
spp_primary.
This is pointed out by the following DPDK Bugzilla tickets.
https://bugs.dpdk.org/show_bug.cgi?id=457
Signed-off-by: Hideyuki Yamashita <yamashita.hideyuki@ntt-tx.co.jp>
Signed-off-by: Naoki Takada <ntakada14@gmail.com>
---
docs/guides/gsg/performance_opt.rst | 55 +++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/docs/guides/gsg/performance_opt.rst b/docs/guides/gsg/performance_opt.rst
index 6fea4cb..24436a5 100644
--- a/docs/guides/gsg/performance_opt.rst
+++ b/docs/guides/gsg/performance_opt.rst
@@ -71,6 +71,61 @@ and so on.
pid 192626's current affinity list: 0-31
pid 192626's new affinity list: 7
+Consideration of NUMA node
+--------------------------
+
+``spp_primary`` tries to create memory pool in the same NUMA node where
+it is launched. Under NUMA configuration, the NUMA node where ``spp_primary``
+is launched and the NUMA node where NIC is connected can be different
+(e.g. spp_primary runs in NUMA node 0 while NIC is connected with NUMA
+node 1).
+Such configuration may cause performance degradation. In general, under
+NUMA configuration, it is best practice to use CPU and NIC which belongs
+to the same NUMA node for best performance. So user should align those
+when performance degradation makes the situation critical.
+
+To check NUMA node which CPU/NIC core belongs, ``lstopo`` command can be used.
+In the following example, CPU core 0 belongs to NUMA node 0 while
+``enp175s0f0`` belongs to NUMA node 1.
+
+.. code-block:: console
+
+ $ lstopo
+ Machine (93GB total)
+ NUMANode L#0 (P#0 46GB)
+ Package L#0 + L3 L#0 (17MB)
+ L2 L#0 (1024KB) + L1d L#0 (32KB) + L1i L#0 (32KB) + Core L#0
+ .....
+ NUMANode L#1 (P#1 47GB)
+ Package L#1 + L3 L#1 (17MB)
+ L2 L#12 (1024KB) + L1d L#12 (32KB) + L1i L#12 (32KB) + Core L#12
+ PU L#24 (P#1)
+ PU L#25 (P#25)
+ .....
+ HostBridge L#10
+ PCIBridge
+ PCI 8086:1563
+ Net L#10 "enp175s0f0"
+ PCI 8086:1563
+ Net L#11 "enp175s0f1"
+
+CPU core where ``spp_primary`` run can be specified
+using -l option.
+
+.. code-block:: console
+
+ # terminal 3
+ $ sudo ./src/primary/x86_64-native-linux-gcc/spp_primary \
+ -l 0 -n 4 \
+ --socket-mem 512,512 \
+ --huge-dir /dev/hugepages \
+ --proc-type primary \
+ --file-prefix $SPP_FILE_PREFIX \
+ --base-virtaddr 0x100000000
+ -- \
+ -p 0x03 \
+ -n 10 \
+ -s 192.168.1.100:5555
Reference
---------
--
2.17.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [spp] [PATCH v2 0/5] updates for catching up DPDK20.02
2020-06-24 4:47 ` [spp] [PATCH v2 0/5] updates for catching up DPDK20.02 x-fn-spp-ml
@ 2020-06-30 6:48 ` Itsuro ODA
2020-07-16 15:56 ` Yasufumi Ogawa
1 sibling, 0 replies; 8+ messages in thread
From: Itsuro ODA @ 2020-06-30 6:48 UTC (permalink / raw)
To: spp, yasufum.o
Reviewed-by: Itsuro Oda <oda@valinux.co.jp>
On Wed, 24 Jun 2020 13:47:31 +0900
x-fn-spp-ml@ntt-tx.co.jp wrote:
> From: Hideyuki Yamashita <yamashita.hideyuki@ntt-tx.co.jp>
>
> v2:
> * separate configuration of 'igb_uio' from that of 'PCAP'
> * move consideration of NUMA node to performance section
>
> Hideyuki Yamashita (5):
> docs: remove unnecessary usage of ethtool
> docs: resolve broken reference link
> docs: catch up updates in dpdk-20.02
> makefile: change default build target
> docs: add note regarding NUMA configuration
>
> GNUmakefile | 2 +-
> docs/guides/design/spp.rst | 4 +-
> docs/guides/gsg/howto_use.rst | 27 +++++-------
> docs/guides/gsg/install.rst | 11 ++++-
> docs/guides/gsg/performance_opt.rst | 55 +++++++++++++++++++++++++
> docs/guides/tools/sppc/app_launcher.rst | 2 +-
> docs/guides/usecases/spp_mirror.rst | 10 ++---
> docs/guides/usecases/spp_pcap.rst | 4 +-
> docs/guides/usecases/spp_vf.rst | 8 ++--
> 9 files changed, 90 insertions(+), 33 deletions(-)
>
> --
> 2.17.1
--
Itsuro ODA <oda@valinux.co.jp>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [spp] [PATCH v2 0/5] updates for catching up DPDK20.02
2020-06-24 4:47 ` [spp] [PATCH v2 0/5] updates for catching up DPDK20.02 x-fn-spp-ml
2020-06-30 6:48 ` Itsuro ODA
@ 2020-07-16 15:56 ` Yasufumi Ogawa
1 sibling, 0 replies; 8+ messages in thread
From: Yasufumi Ogawa @ 2020-07-16 15:56 UTC (permalink / raw)
To: x-fn-spp-ml; +Cc: spp
> From: Hideyuki Yamashita <yamashita.hideyuki@ntt-tx.co.jp>
>
> v2:
> * separate configuration of 'igb_uio' from that of 'PCAP'
> * move consideration of NUMA node to performance section
Hi,
Sorry for late reply. I've not found your update.
Appliied.
Acked-by: Yasufumii Ogawa <yasufum.o@gmail.com>
>
> Hideyuki Yamashita (5):
> docs: remove unnecessary usage of ethtool
> docs: resolve broken reference link
> docs: catch up updates in dpdk-20.02
> makefile: change default build target
> docs: add note regarding NUMA configuration
>
> GNUmakefile | 2 +-
> docs/guides/design/spp.rst | 4 +-
> docs/guides/gsg/howto_use.rst | 27 +++++-------
> docs/guides/gsg/install.rst | 11 ++++-
> docs/guides/gsg/performance_opt.rst | 55 +++++++++++++++++++++++++
> docs/guides/tools/sppc/app_launcher.rst | 2 +-
> docs/guides/usecases/spp_mirror.rst | 10 ++---
> docs/guides/usecases/spp_pcap.rst | 4 +-
> docs/guides/usecases/spp_vf.rst | 8 ++--
> 9 files changed, 90 insertions(+), 33 deletions(-)
>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2020-07-16 15:56 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20200529110932.26508-1-x-fn-spp-ml@ntt-tx.co.jp>
2020-06-24 4:47 ` [spp] [PATCH v2 0/5] updates for catching up DPDK20.02 x-fn-spp-ml
2020-06-30 6:48 ` Itsuro ODA
2020-07-16 15:56 ` Yasufumi Ogawa
2020-06-24 4:47 ` [spp] [PATCH v2 1/5] docs: remove unnecessary usage of ethtool x-fn-spp-ml
2020-06-24 4:47 ` [spp] [PATCH v2 2/5] docs: resolve broken reference link x-fn-spp-ml
2020-06-24 4:47 ` [spp] [PATCH v2 3/5] docs: catch up updates in dpdk-20.02 x-fn-spp-ml
2020-06-24 4:47 ` [spp] [PATCH v2 4/5] makefile: change default build target x-fn-spp-ml
2020-06-24 4:47 ` [spp] [PATCH v2 5/5] docs: add note regarding NUMA configuration x-fn-spp-ml
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).