[dpdk-stable] [PATCH] net/ixgbe: fix blocking system events

[dpdk-stable] [PATCH] net/ixgbe: fix blocking system events

[taox.zhu]

From: Zhu Tao <taox.zhu@intel.com>

IXGBE link status task use rte alarm thread in old implementation.
Sometime ixgbe link status task takes up to 9 seconds. This will
severely affect the rte-alarm-thread-dependent a task in the system,
like  interrupt or hotplug event. So replace with a independent thread
which has the same thread affinity settings as rte interrupt.

Fixes: 0408f47b ("net/ixgbe: fix busy polling while fiber link update")
Cc: stable@dpdk.org

Signed-off-by: Zhu Tao <taox.zhu@intel.com>
---
 drivers/net/ixgbe/ixgbe_ethdev.c | 184 +++++++++++++++++++++++++++++++++++++--
 drivers/net/ixgbe/ixgbe_ethdev.h |  32 +++++++
 2 files changed, 210 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 2c6fd0f..f0b387d 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -15,6 +15,7 @@
 #include <rte_byteorder.h>
 #include <rte_common.h>
 #include <rte_cycles.h>
+#include <rte_tailq.h>
 
 #include <rte_interrupts.h>
 #include <rte_log.h>
@@ -378,6 +379,9 @@ static int ixgbe_dev_udp_tunnel_port_del(struct rte_eth_dev *dev,
 					 struct rte_eth_udp_tunnel *udp_tunnel);
 static int ixgbe_filter_restore(struct rte_eth_dev *dev);
 static void ixgbe_l2_tunnel_conf(struct rte_eth_dev *dev);
+static int ixgbe_task_thread_init(struct rte_eth_dev *dev);
+static void ixgbe_task_thread_uninit(struct rte_eth_dev *dev);
+
 
 /*
  * Define VF Stats MACRO for Non "cleared on read" register
@@ -1069,6 +1073,171 @@ struct rte_ixgbe_xstats_name_off {
 }
 
 /*
+ * Add a task to task queue tail.
+ */
+int ixgbe_add_task(struct rte_eth_dev *dev, ixgbe_task_cb_fn task_cb)
+{
+	struct ixgbe_adapter *ad = dev->data->dev_private;
+	struct ixgbe_task *task;
+
+	if (ad->task_status == IXGBE_TASK_THREAD_RUNNING) {
+		task = rte_zmalloc("ixgbe", sizeof(struct ixgbe_task), 0);
+		if (task == NULL)
+			return -ENOMEM;
+
+		task->arg = dev;
+		task->task_cb = task_cb;
+		task->status = IXGBE_TASK_READY;
+
+		pthread_mutex_lock(&ad->task_lock);
+		TAILQ_INSERT_TAIL(&ad->task_head, task, next);
+		pthread_cond_signal(&ad->task_cond);
+		pthread_mutex_unlock(&ad->task_lock);
+	} else {
+		return -EPERM;	/* Operation not permitted */
+	}
+
+	return 0;
+}
+
+/*
+ * Sync cancel a task with all @task_cb be exit.
+ */
+int ixgbe_cancel_task(struct rte_eth_dev *dev, ixgbe_task_cb_fn task_cb)
+{
+	struct ixgbe_adapter *ad = dev->data->dev_private;
+	struct ixgbe_task *task, *ttask;
+	int i, executing;
+#define DELAY_TIMEOUT_LOG   2000	// 2s
+#define DELAY_TIMEOUT_MAX   10000	// 10s
+
+	for (i = 0; i < DELAY_TIMEOUT_MAX; i++) {
+		executing = 0;
+		if (ad->task_status == IXGBE_TASK_THREAD_RUNNING) {
+			pthread_mutex_lock(&ad->task_lock);
+			TAILQ_FOREACH_SAFE(task, &ad->task_head, next, ttask) {
+				if (task->task_cb == task_cb) {
+					if (task->status == IXGBE_TASK_RUNNING) {
+						executing++;
+					} else {
+						TAILQ_REMOVE(&ad->task_head, task, next);
+						rte_free(task);
+					}
+				}
+			}
+			pthread_mutex_unlock(&ad->task_lock);
+
+			if (executing) {
+				if (i > DELAY_TIMEOUT_LOG && (i % 1000 == 0)) {
+					PMD_DRV_LOG(WARNING,
+						    "Cannel task time wait %ds!", i / 1000);
+				}
+
+				rte_delay_us_sleep(1000);	// 1ms
+				continue;
+			}
+		}
+		break;
+	}
+
+	if (i == DELAY_TIMEOUT_MAX)
+		return -EBUSY;
+
+	return 0;
+}
+
+/*
+ * Task main thread. Loop until state is set to IXGBE_TASK_THREAD_EXIT.
+ * For each task, set the status to IXGBE_TASK_RUNNING before execution,
+ * execute and then be dequeue.
+ */
+static void *ixgbe_task_handler(void *args)
+{
+	struct ixgbe_adapter *ad =
+	    ((struct rte_eth_dev *)args)->data->dev_private;
+	struct ixgbe_task *task;
+
+	PMD_INIT_LOG(DEBUG, "ixgbe task thread created");
+	while (ad->task_status) {
+		pthread_mutex_lock(&ad->task_lock);
+		if (TAILQ_EMPTY(&ad->task_head)) {
+			pthread_cond_wait(&ad->task_cond, &ad->task_lock);
+			pthread_mutex_unlock(&ad->task_lock);
+			continue;
+		}
+
+		/* pop firt task and run it */
+		task = TAILQ_FIRST(&ad->task_head);
+		task->status = IXGBE_TASK_RUNNING;
+		pthread_mutex_unlock(&ad->task_lock);
+
+		if (task && task->task_cb)
+			task->task_cb(task->arg);
+
+		pthread_mutex_lock(&ad->task_lock);
+		TAILQ_REMOVE(&ad->task_head, task, next);
+		rte_free(task);
+		pthread_mutex_unlock(&ad->task_lock);
+	}
+
+	pthread_mutex_lock(&ad->task_lock);
+	while (!TAILQ_EMPTY(&ad->task_head)) {
+		task = TAILQ_FIRST(&ad->task_head);
+		TAILQ_REMOVE(&ad->task_head, task, next);
+		rte_free(task);
+	}
+	pthread_mutex_unlock(&ad->task_lock);
+	ad->task_status = IXGBE_TASK_THREAD_EXIT_DONE;
+
+	return NULL;
+}
+
+static int ixgbe_task_thread_init(struct rte_eth_dev *dev)
+{
+	struct ixgbe_adapter *ad = dev->data->dev_private;
+	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+	char name[IXGBE_TASK_THREAD_NAME_LEN];
+	int ret;
+
+	TAILQ_INIT(&ad->task_head);
+	pthread_mutex_init(&ad->task_lock, NULL);
+	pthread_cond_init(&ad->task_cond, NULL);
+
+	snprintf(name, IXGBE_TASK_THREAD_NAME_LEN, "ixgbe-delay:%s",
+		 pci_dev->name);
+
+	ret = rte_ctrl_thread_create(&ad->task_tid, name, NULL,
+				     ixgbe_task_handler, dev);
+	if (ret < 0) {
+		PMD_INIT_LOG(ERR, "Create control thread %s fail!", name);
+		return ret;
+	}
+	ad->task_status = IXGBE_TASK_THREAD_RUNNING;
+
+	return 0;
+}
+
+static void ixgbe_task_thread_uninit(struct rte_eth_dev *dev)
+{
+	struct ixgbe_adapter *ad = dev->data->dev_private;
+	int i;
+#define MAX_EXIT_TIMEOUT  3000	/* 3s */
+
+	if (ad->task_status == IXGBE_TASK_THREAD_RUNNING) {
+		ad->task_status = IXGBE_TASK_THREAD_EXIT;
+		pthread_cond_signal(&ad->task_cond);
+		for (i = 0; i < MAX_EXIT_TIMEOUT; i++) {
+			if (ad->task_status == IXGBE_TASK_THREAD_EXIT_DONE) {
+				pthread_cond_destroy(&ad->task_cond);
+				pthread_mutex_destroy(&ad->task_lock);
+				break;
+			}
+			rte_delay_us_sleep(1000);	// 1ms
+		}
+	}
+}
+
+/*
  * This function is based on code in ixgbe_attach() in base/ixgbe.c.
  * It returns 0 on success.
  */
@@ -1301,6 +1470,7 @@ struct rte_ixgbe_xstats_name_off {
 	/* enable support intr */
 	ixgbe_enable_intr(eth_dev);
 
+	ixgbe_task_thread_init(eth_dev);
 	ixgbe_dev_set_link_down(eth_dev);
 
 	/* initialize filter info */
@@ -1337,6 +1507,7 @@ struct rte_ixgbe_xstats_name_off {
 		return 0;
 
 	ixgbe_dev_close(eth_dev);
+	ixgbe_task_thread_uninit(eth_dev);
 
 	return 0;
 }
@@ -1713,6 +1884,7 @@ static int ixgbe_l2_tn_filter_init(struct rte_eth_dev *eth_dev)
 				   ixgbevf_dev_interrupt_handler, eth_dev);
 	rte_intr_enable(intr_handle);
 	ixgbevf_intr_enable(eth_dev);
+	ixgbe_task_thread_init(eth_dev);
 
 	PMD_INIT_LOG(DEBUG, "port %d vendorID=0x%x deviceID=0x%x mac.type=%s",
 		     eth_dev->data->port_id, pci_dev->id.vendor_id,
@@ -1732,6 +1904,7 @@ static int ixgbe_l2_tn_filter_init(struct rte_eth_dev *eth_dev)
 		return 0;
 
 	ixgbevf_dev_close(eth_dev);
+	ixgbe_task_thread_uninit(eth_dev);
 
 	return 0;
 }
@@ -2570,7 +2743,7 @@ static int eth_ixgbevf_pci_remove(struct rte_pci_device *pci_dev)
 	}
 
 	/* Stop the link setup handler before resetting the HW. */
-	rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
+	ixgbe_cancel_task(dev, ixgbe_dev_setup_link_alarm_handler);
 
 	/* disable uio/vfio intr/eventfd mapping */
 	rte_intr_disable(intr_handle);
@@ -2842,7 +3015,7 @@ static int eth_ixgbevf_pci_remove(struct rte_pci_device *pci_dev)
 
 	PMD_INIT_FUNC_TRACE();
 
-	rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
+	ixgbe_cancel_task(dev, ixgbe_dev_setup_link_alarm_handler);
 
 	/* disable interrupts */
 	ixgbe_disable_intr(hw);
@@ -4162,8 +4335,7 @@ static int ixgbevf_dev_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
 	if (link_up == 0) {
 		if (ixgbe_get_media_type(hw) == ixgbe_media_type_fiber) {
 			intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
-			rte_eal_alarm_set(10,
-				ixgbe_dev_setup_link_alarm_handler, dev);
+			ixgbe_add_task(dev, ixgbe_dev_setup_link_alarm_handler);
 		}
 		return rte_eth_linkstatus_set(dev, &link);
 	}
@@ -5207,7 +5379,7 @@ static int ixgbevf_dev_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
 	PMD_INIT_FUNC_TRACE();
 
 	/* Stop the link setup handler before resetting the HW. */
-	rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
+	ixgbe_cancel_task(dev, ixgbe_dev_setup_link_alarm_handler);
 
 	err = hw->mac.ops.reset_hw(hw);
 	if (err) {
@@ -5305,7 +5477,7 @@ static int ixgbevf_dev_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
 
 	PMD_INIT_FUNC_TRACE();
 
-	rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
+	ixgbe_cancel_task(dev, ixgbe_dev_setup_link_alarm_handler);
 
 	ixgbevf_intr_disable(dev);
 
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
index 76a1b9d..4426349 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.h
+++ b/drivers/net/ixgbe/ixgbe_ethdev.h
@@ -470,6 +470,28 @@ struct ixgbe_tm_conf {
 	bool committed;
 };
 
+#define IXGBE_TASK_THREAD_NAME_LEN  64
+enum {
+	IXGBE_TASK_THREAD_EXIT = 0,
+	IXGBE_TASK_THREAD_RUNNING = 1,
+	IXGBE_TASK_THREAD_EXIT_DONE = 2
+};
+enum {
+	IXGBE_TASK_READY = 0,
+	IXGBE_TASK_RUNNING = 1,
+	IXGBE_TASK_FINISH = 2
+};
+
+typedef void (*ixgbe_task_cb_fn) (void *arg);
+struct ixgbe_task {
+	TAILQ_ENTRY(ixgbe_task) next;
+	void *arg;
+	int status;
+	ixgbe_task_cb_fn task_cb;
+};
+TAILQ_HEAD(ixgbe_task_head, ixgbe_task);
+
+
 /*
  * Structure to store private data for each driver instance (for each port).
  */
@@ -510,6 +532,13 @@ struct ixgbe_adapter {
 	 * mailbox status) link status.
 	 */
 	uint8_t pflink_fullchk;
+
+	/* Control thread per VF/PF, used for to do delay work */
+	pthread_t task_tid;
+	struct ixgbe_task_head task_head;
+	int task_status;
+	pthread_mutex_t task_lock;
+	pthread_cond_t task_cond;
 };
 
 struct ixgbe_vf_representor {
@@ -760,6 +789,9 @@ void ixgbe_dev_macsec_setting_save(struct rte_eth_dev *dev,
 		struct ixgbe_macsec_setting *macsec_setting);
 
 void ixgbe_dev_macsec_setting_reset(struct rte_eth_dev *dev);
+int ixgbe_add_task(struct rte_eth_dev *dev, ixgbe_task_cb_fn task_cb);
+int ixgbe_cancel_task(struct rte_eth_dev *dev, ixgbe_task_cb_fn task_cb);
+
 
 static inline int
 ixgbe_ethertype_filter_lookup(struct ixgbe_filter_info *filter_info,
-- 
1.8.3.1

Re: [dpdk-stable] [PATCH] net/ixgbe: fix blocking system events

[Ananyev, Konstantin]

Hi, 

> IXGBE link status task use rte alarm thread in old implementation.
> Sometime ixgbe link status task takes up to 9 seconds. This will
> severely affect the rte-alarm-thread-dependent a task in the system,
> like  interrupt or hotplug event. So replace with a independent thread
> which has the same thread affinity settings as rte interrupt.


I don't think it is a good idea to add into PMD code that creates/manages
new threads.
I think ideal would be to rework link setup code, so it can take less time
(make it interruptable/repeatable).
If that is not possible, and control function is the only way,
there is a wrapper function: rte_ctrl_thread_create()
that can be used here instead of creating your own framework.
 

> 
> Fixes: 0408f47b ("net/ixgbe: fix busy polling while fiber link update")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Zhu Tao <taox.zhu@intel.com>
> ---
>  drivers/net/ixgbe/ixgbe_ethdev.c | 184 +++++++++++++++++++++++++++++++++++++--
>  drivers/net/ixgbe/ixgbe_ethdev.h |  32 +++++++
>  2 files changed, 210 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
> index 2c6fd0f..f0b387d 100644
> --- a/drivers/net/ixgbe/ixgbe_ethdev.c
> +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
> @@ -15,6 +15,7 @@
>  #include <rte_byteorder.h>
>  #include <rte_common.h>
>  #include <rte_cycles.h>
> +#include <rte_tailq.h>
> 
>  #include <rte_interrupts.h>
>  #include <rte_log.h>
> @@ -378,6 +379,9 @@ static int ixgbe_dev_udp_tunnel_port_del(struct rte_eth_dev *dev,
>  					 struct rte_eth_udp_tunnel *udp_tunnel);
>  static int ixgbe_filter_restore(struct rte_eth_dev *dev);
>  static void ixgbe_l2_tunnel_conf(struct rte_eth_dev *dev);
> +static int ixgbe_task_thread_init(struct rte_eth_dev *dev);
> +static void ixgbe_task_thread_uninit(struct rte_eth_dev *dev);
> +
> 
>  /*
>   * Define VF Stats MACRO for Non "cleared on read" register
> @@ -1069,6 +1073,171 @@ struct rte_ixgbe_xstats_name_off {
>  }
> 
>  /*
> + * Add a task to task queue tail.
> + */
> +int ixgbe_add_task(struct rte_eth_dev *dev, ixgbe_task_cb_fn task_cb)
> +{
> +	struct ixgbe_adapter *ad = dev->data->dev_private;
> +	struct ixgbe_task *task;
> +
> +	if (ad->task_status == IXGBE_TASK_THREAD_RUNNING) {
> +		task = rte_zmalloc("ixgbe", sizeof(struct ixgbe_task), 0);
> +		if (task == NULL)
> +			return -ENOMEM;
> +
> +		task->arg = dev;
> +		task->task_cb = task_cb;
> +		task->status = IXGBE_TASK_READY;
> +
> +		pthread_mutex_lock(&ad->task_lock);
> +		TAILQ_INSERT_TAIL(&ad->task_head, task, next);
> +		pthread_cond_signal(&ad->task_cond);
> +		pthread_mutex_unlock(&ad->task_lock);
> +	} else {
> +		return -EPERM;	/* Operation not permitted */
> +	}
> +
> +	return 0;
> +}
> +
> +/*
> + * Sync cancel a task with all @task_cb be exit.
> + */
> +int ixgbe_cancel_task(struct rte_eth_dev *dev, ixgbe_task_cb_fn task_cb)
> +{
> +	struct ixgbe_adapter *ad = dev->data->dev_private;
> +	struct ixgbe_task *task, *ttask;
> +	int i, executing;
> +#define DELAY_TIMEOUT_LOG   2000	// 2s
> +#define DELAY_TIMEOUT_MAX   10000	// 10s
> +
> +	for (i = 0; i < DELAY_TIMEOUT_MAX; i++) {
> +		executing = 0;
> +		if (ad->task_status == IXGBE_TASK_THREAD_RUNNING) {
> +			pthread_mutex_lock(&ad->task_lock);
> +			TAILQ_FOREACH_SAFE(task, &ad->task_head, next, ttask) {
> +				if (task->task_cb == task_cb) {
> +					if (task->status == IXGBE_TASK_RUNNING) {
> +						executing++;
> +					} else {
> +						TAILQ_REMOVE(&ad->task_head, task, next);
> +						rte_free(task);
> +					}
> +				}
> +			}
> +			pthread_mutex_unlock(&ad->task_lock);
> +
> +			if (executing) {
> +				if (i > DELAY_TIMEOUT_LOG && (i % 1000 == 0)) {
> +					PMD_DRV_LOG(WARNING,
> +						    "Cannel task time wait %ds!", i / 1000);
> +				}
> +
> +				rte_delay_us_sleep(1000);	// 1ms
> +				continue;
> +			}
> +		}
> +		break;
> +	}
> +
> +	if (i == DELAY_TIMEOUT_MAX)
> +		return -EBUSY;
> +
> +	return 0;
> +}
> +
> +/*
> + * Task main thread. Loop until state is set to IXGBE_TASK_THREAD_EXIT.
> + * For each task, set the status to IXGBE_TASK_RUNNING before execution,
> + * execute and then be dequeue.
> + */
> +static void *ixgbe_task_handler(void *args)
> +{
> +	struct ixgbe_adapter *ad =
> +	    ((struct rte_eth_dev *)args)->data->dev_private;
> +	struct ixgbe_task *task;
> +
> +	PMD_INIT_LOG(DEBUG, "ixgbe task thread created");
> +	while (ad->task_status) {
> +		pthread_mutex_lock(&ad->task_lock);
> +		if (TAILQ_EMPTY(&ad->task_head)) {
> +			pthread_cond_wait(&ad->task_cond, &ad->task_lock);
> +			pthread_mutex_unlock(&ad->task_lock);
> +			continue;
> +		}
> +
> +		/* pop firt task and run it */
> +		task = TAILQ_FIRST(&ad->task_head);
> +		task->status = IXGBE_TASK_RUNNING;
> +		pthread_mutex_unlock(&ad->task_lock);
> +
> +		if (task && task->task_cb)
> +			task->task_cb(task->arg);
> +
> +		pthread_mutex_lock(&ad->task_lock);
> +		TAILQ_REMOVE(&ad->task_head, task, next);
> +		rte_free(task);
> +		pthread_mutex_unlock(&ad->task_lock);
> +	}
> +
> +	pthread_mutex_lock(&ad->task_lock);
> +	while (!TAILQ_EMPTY(&ad->task_head)) {
> +		task = TAILQ_FIRST(&ad->task_head);
> +		TAILQ_REMOVE(&ad->task_head, task, next);
> +		rte_free(task);
> +	}
> +	pthread_mutex_unlock(&ad->task_lock);
> +	ad->task_status = IXGBE_TASK_THREAD_EXIT_DONE;
> +
> +	return NULL;
> +}
> +
> +static int ixgbe_task_thread_init(struct rte_eth_dev *dev)
> +{
> +	struct ixgbe_adapter *ad = dev->data->dev_private;
> +	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
> +	char name[IXGBE_TASK_THREAD_NAME_LEN];
> +	int ret;
> +
> +	TAILQ_INIT(&ad->task_head);
> +	pthread_mutex_init(&ad->task_lock, NULL);
> +	pthread_cond_init(&ad->task_cond, NULL);
> +
> +	snprintf(name, IXGBE_TASK_THREAD_NAME_LEN, "ixgbe-delay:%s",
> +		 pci_dev->name);
> +
> +	ret = rte_ctrl_thread_create(&ad->task_tid, name, NULL,
> +				     ixgbe_task_handler, dev);
> +	if (ret < 0) {
> +		PMD_INIT_LOG(ERR, "Create control thread %s fail!", name);
> +		return ret;
> +	}
> +	ad->task_status = IXGBE_TASK_THREAD_RUNNING;
> +
> +	return 0;
> +}
> +
> +static void ixgbe_task_thread_uninit(struct rte_eth_dev *dev)
> +{
> +	struct ixgbe_adapter *ad = dev->data->dev_private;
> +	int i;
> +#define MAX_EXIT_TIMEOUT  3000	/* 3s */
> +
> +	if (ad->task_status == IXGBE_TASK_THREAD_RUNNING) {
> +		ad->task_status = IXGBE_TASK_THREAD_EXIT;
> +		pthread_cond_signal(&ad->task_cond);
> +		for (i = 0; i < MAX_EXIT_TIMEOUT; i++) {
> +			if (ad->task_status == IXGBE_TASK_THREAD_EXIT_DONE) {
> +				pthread_cond_destroy(&ad->task_cond);
> +				pthread_mutex_destroy(&ad->task_lock);
> +				break;
> +			}
> +			rte_delay_us_sleep(1000);	// 1ms
> +		}
> +	}
> +}
> +
> +/*
>   * This function is based on code in ixgbe_attach() in base/ixgbe.c.
>   * It returns 0 on success.
>   */
> @@ -1301,6 +1470,7 @@ struct rte_ixgbe_xstats_name_off {
>  	/* enable support intr */
>  	ixgbe_enable_intr(eth_dev);
> 
> +	ixgbe_task_thread_init(eth_dev);
>  	ixgbe_dev_set_link_down(eth_dev);
> 
>  	/* initialize filter info */
> @@ -1337,6 +1507,7 @@ struct rte_ixgbe_xstats_name_off {
>  		return 0;
> 
>  	ixgbe_dev_close(eth_dev);
> +	ixgbe_task_thread_uninit(eth_dev);
> 
>  	return 0;
>  }
> @@ -1713,6 +1884,7 @@ static int ixgbe_l2_tn_filter_init(struct rte_eth_dev *eth_dev)
>  				   ixgbevf_dev_interrupt_handler, eth_dev);
>  	rte_intr_enable(intr_handle);
>  	ixgbevf_intr_enable(eth_dev);
> +	ixgbe_task_thread_init(eth_dev);
> 
>  	PMD_INIT_LOG(DEBUG, "port %d vendorID=0x%x deviceID=0x%x mac.type=%s",
>  		     eth_dev->data->port_id, pci_dev->id.vendor_id,
> @@ -1732,6 +1904,7 @@ static int ixgbe_l2_tn_filter_init(struct rte_eth_dev *eth_dev)
>  		return 0;
> 
>  	ixgbevf_dev_close(eth_dev);
> +	ixgbe_task_thread_uninit(eth_dev);
> 
>  	return 0;
>  }
> @@ -2570,7 +2743,7 @@ static int eth_ixgbevf_pci_remove(struct rte_pci_device *pci_dev)
>  	}
> 
>  	/* Stop the link setup handler before resetting the HW. */
> -	rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
> +	ixgbe_cancel_task(dev, ixgbe_dev_setup_link_alarm_handler);
> 
>  	/* disable uio/vfio intr/eventfd mapping */
>  	rte_intr_disable(intr_handle);
> @@ -2842,7 +3015,7 @@ static int eth_ixgbevf_pci_remove(struct rte_pci_device *pci_dev)
> 
>  	PMD_INIT_FUNC_TRACE();
> 
> -	rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
> +	ixgbe_cancel_task(dev, ixgbe_dev_setup_link_alarm_handler);
> 
>  	/* disable interrupts */
>  	ixgbe_disable_intr(hw);
> @@ -4162,8 +4335,7 @@ static int ixgbevf_dev_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
>  	if (link_up == 0) {
>  		if (ixgbe_get_media_type(hw) == ixgbe_media_type_fiber) {
>  			intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
> -			rte_eal_alarm_set(10,
> -				ixgbe_dev_setup_link_alarm_handler, dev);
> +			ixgbe_add_task(dev, ixgbe_dev_setup_link_alarm_handler);
>  		}
>  		return rte_eth_linkstatus_set(dev, &link);
>  	}
> @@ -5207,7 +5379,7 @@ static int ixgbevf_dev_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
>  	PMD_INIT_FUNC_TRACE();
> 
>  	/* Stop the link setup handler before resetting the HW. */
> -	rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
> +	ixgbe_cancel_task(dev, ixgbe_dev_setup_link_alarm_handler);
> 
>  	err = hw->mac.ops.reset_hw(hw);
>  	if (err) {
> @@ -5305,7 +5477,7 @@ static int ixgbevf_dev_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
> 
>  	PMD_INIT_FUNC_TRACE();
> 
> -	rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
> +	ixgbe_cancel_task(dev, ixgbe_dev_setup_link_alarm_handler);
> 
>  	ixgbevf_intr_disable(dev);
> 
> diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
> index 76a1b9d..4426349 100644
> --- a/drivers/net/ixgbe/ixgbe_ethdev.h
> +++ b/drivers/net/ixgbe/ixgbe_ethdev.h
> @@ -470,6 +470,28 @@ struct ixgbe_tm_conf {
>  	bool committed;
>  };
> 
> +#define IXGBE_TASK_THREAD_NAME_LEN  64
> +enum {
> +	IXGBE_TASK_THREAD_EXIT = 0,
> +	IXGBE_TASK_THREAD_RUNNING = 1,
> +	IXGBE_TASK_THREAD_EXIT_DONE = 2
> +};
> +enum {
> +	IXGBE_TASK_READY = 0,
> +	IXGBE_TASK_RUNNING = 1,
> +	IXGBE_TASK_FINISH = 2
> +};
> +
> +typedef void (*ixgbe_task_cb_fn) (void *arg);
> +struct ixgbe_task {
> +	TAILQ_ENTRY(ixgbe_task) next;
> +	void *arg;
> +	int status;
> +	ixgbe_task_cb_fn task_cb;
> +};
> +TAILQ_HEAD(ixgbe_task_head, ixgbe_task);
> +
> +
>  /*
>   * Structure to store private data for each driver instance (for each port).
>   */
> @@ -510,6 +532,13 @@ struct ixgbe_adapter {
>  	 * mailbox status) link status.
>  	 */
>  	uint8_t pflink_fullchk;
> +
> +	/* Control thread per VF/PF, used for to do delay work */
> +	pthread_t task_tid;
> +	struct ixgbe_task_head task_head;
> +	int task_status;
> +	pthread_mutex_t task_lock;
> +	pthread_cond_t task_cond;
>  };
> 
>  struct ixgbe_vf_representor {
> @@ -760,6 +789,9 @@ void ixgbe_dev_macsec_setting_save(struct rte_eth_dev *dev,
>  		struct ixgbe_macsec_setting *macsec_setting);
> 
>  void ixgbe_dev_macsec_setting_reset(struct rte_eth_dev *dev);
> +int ixgbe_add_task(struct rte_eth_dev *dev, ixgbe_task_cb_fn task_cb);
> +int ixgbe_cancel_task(struct rte_eth_dev *dev, ixgbe_task_cb_fn task_cb);
> +
> 
>  static inline int
>  ixgbe_ethertype_filter_lookup(struct ixgbe_filter_info *filter_info,
> --
> 1.8.3.1

Re: [dpdk-stable] [PATCH] net/ixgbe: fix blocking system events

[Zhu, TaoX]

Hi Konstantin,

Thank you for your advice. Your advice is excellent. I have the same idea with you to solve this problem.
First.  Consider whether the fallback function of alamer can shorten the time. 
But it seems difficult for the following reasons(If you have a good idea, please let me know):
	a. The entry of the fallback function is 'ixgbe_setup_mac_link_multispeed_fiber', It's a little more complicated
	b. This callback function not only has multiple sleeps, but also may have long sleep in other functions it calls
	c. The function called by the callback function has different implementations for different NIC
	d. This callback function and other functions it calls are all from ND's shared code. After modification, upgrading will cause trouble

So I use a separate thread to replace alarm, This thread is created using wrapper function: rte_ctrl_thread_create().
A mechanism is provided to create a thread when PF or VF is initialized for the first time. This thread will select tasks from the task list in order to execute. If the task list is empty, the thread sleeps. 
Provides interface for adding and deleting tasks.
The specific implementation is as follows(See patch for detailed implementation):
	a. Thread create function: ixgbe_task_thread_init, it will call rte_ctrl_thread_create to create thread
	b. Thread destroy function: ixgbe_task_thread_uninit
	c. Add task function: ixgbe_add_task, it add a task and wake up the sleeping thread
	d. Cancel task function: ixgbe_cancel_task, it cancel a task synchronously

The reason why a task queue is used to manage tasks is that there may be concurrent conflicts, because alarm has no concurrent conflicts.

BR,
Zhu, Tao

> -----Original Message-----
> From: Ananyev, Konstantin
> Sent: Monday, December 30, 2019 9:58 PM
> To: Zhu, TaoX <taox.zhu@intel.com>; konstantin.ananyev@intel.com
> wenzhuo.lu@intel.com
> Cc: dev@dpdk.org; stable@dpdk.org
> Subject: RE: [PATCH] net/ixgbe: fix blocking system events
> 
> Hi,
> 
> > IXGBE link status task use rte alarm thread in old implementation.
> > Sometime ixgbe link status task takes up to 9 seconds. This will
> > severely affect the rte-alarm-thread-dependent a task in the system,
> > like  interrupt or hotplug event. So replace with a independent thread
> > which has the same thread affinity settings as rte interrupt.
> 
> 
> I don't think it is a good idea to add into PMD code that creates/manages
> new threads.
> I think ideal would be to rework link setup code, so it can take less time
> (make it interruptable/repeatable).
> If that is not possible, and control function is the only way, there is a wrapper
> function: rte_ctrl_thread_create() that can be used here instead of creating
> your own framework.
> 
> 
> >
> > Fixes: 0408f47b ("net/ixgbe: fix busy polling while fiber link
> > update")
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: Zhu Tao <taox.zhu@intel.com>
> > ---
> >  drivers/net/ixgbe/ixgbe_ethdev.c | 184
> > +++++++++++++++++++++++++++++++++++++--
> >  drivers/net/ixgbe/ixgbe_ethdev.h |  32 +++++++
> >  2 files changed, 210 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c
> > b/drivers/net/ixgbe/ixgbe_ethdev.c
> > index 2c6fd0f..f0b387d 100644
> > --- a/drivers/net/ixgbe/ixgbe_ethdev.c
> > +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
> > @@ -15,6 +15,7 @@
> >  #include <rte_byteorder.h>
> >  #include <rte_common.h>
> >  #include <rte_cycles.h>
> > +#include <rte_tailq.h>
> >
> >  #include <rte_interrupts.h>
> >  #include <rte_log.h>
> > @@ -378,6 +379,9 @@ static int ixgbe_dev_udp_tunnel_port_del(struct
> rte_eth_dev *dev,
> >   struct rte_eth_udp_tunnel *udp_tunnel);  static int
> > ixgbe_filter_restore(struct rte_eth_dev *dev);  static void
> > ixgbe_l2_tunnel_conf(struct rte_eth_dev *dev);
> > +static int ixgbe_task_thread_init(struct rte_eth_dev *dev); static
> > +void ixgbe_task_thread_uninit(struct rte_eth_dev *dev);
> > +
> >
> >  /*
> >   * Define VF Stats MACRO for Non "cleared on read" register @@
> > -1069,6 +1073,171 @@ struct rte_ixgbe_xstats_name_off {  }
> >
> >  /*
> > + * Add a task to task queue tail.
> > + */
> > +int ixgbe_add_task(struct rte_eth_dev *dev, ixgbe_task_cb_fn task_cb)
> > +{ struct ixgbe_adapter *ad = dev->data->dev_private; struct
> > +ixgbe_task *task;
> > +
> > +if (ad->task_status == IXGBE_TASK_THREAD_RUNNING) { task =
> > +rte_zmalloc("ixgbe", sizeof(struct ixgbe_task), 0); if (task == NULL)
> > +return -ENOMEM;
> > +
> > +task->arg = dev;
> > +task->task_cb = task_cb;
> > +task->status = IXGBE_TASK_READY;
> > +
> > +pthread_mutex_lock(&ad->task_lock);
> > +TAILQ_INSERT_TAIL(&ad->task_head, task, next);
> > +pthread_cond_signal(&ad->task_cond);
> > +pthread_mutex_unlock(&ad->task_lock);
> > +} else {
> > +return -EPERM;/* Operation not permitted */ }
> > +
> > +return 0;
> > +}
> > +
> > +/*
> > + * Sync cancel a task with all @task_cb be exit.
> > + */
> > +int ixgbe_cancel_task(struct rte_eth_dev *dev, ixgbe_task_cb_fn
> > +task_cb) { struct ixgbe_adapter *ad = dev->data->dev_private; struct
> > +ixgbe_task *task, *ttask; int i, executing;
> > +#define DELAY_TIMEOUT_LOG   2000// 2s
> > +#define DELAY_TIMEOUT_MAX   10000// 10s
> > +
> > +for (i = 0; i < DELAY_TIMEOUT_MAX; i++) { executing = 0; if
> > +(ad->task_status == IXGBE_TASK_THREAD_RUNNING) {
> > +pthread_mutex_lock(&ad->task_lock);
> > +TAILQ_FOREACH_SAFE(task, &ad->task_head, next, ttask) { if
> > +(task->task_cb == task_cb) { if (task->status == IXGBE_TASK_RUNNING)
> > +{
> > +executing++;
> > +} else {
> > +TAILQ_REMOVE(&ad->task_head, task, next); rte_free(task); } } }
> > +pthread_mutex_unlock(&ad->task_lock);
> > +
> > +if (executing) {
> > +if (i > DELAY_TIMEOUT_LOG && (i % 1000 == 0))
> { PMD_DRV_LOG(WARNING,
> > +    "Cannel task time wait %ds!", i / 1000); }
> > +
> > +rte_delay_us_sleep(1000);// 1ms
> > +continue;
> > +}
> > +}
> > +break;
> > +}
> > +
> > +if (i == DELAY_TIMEOUT_MAX)
> > +return -EBUSY;
> > +
> > +return 0;
> > +}
> > +
> > +/*
> > + * Task main thread. Loop until state is set to IXGBE_TASK_THREAD_EXIT.
> > + * For each task, set the status to IXGBE_TASK_RUNNING before
> > +execution,
> > + * execute and then be dequeue.
> > + */
> > +static void *ixgbe_task_handler(void *args) { struct ixgbe_adapter
> > +*ad =
> > +    ((struct rte_eth_dev *)args)->data->dev_private; struct
> > +ixgbe_task *task;
> > +
> > +PMD_INIT_LOG(DEBUG, "ixgbe task thread created"); while
> > +(ad->task_status) { pthread_mutex_lock(&ad->task_lock);
> > +if (TAILQ_EMPTY(&ad->task_head)) {
> > +pthread_cond_wait(&ad->task_cond, &ad->task_lock);
> > +pthread_mutex_unlock(&ad->task_lock);
> > +continue;
> > +}
> > +
> > +/* pop firt task and run it */
> > +task = TAILQ_FIRST(&ad->task_head);
> > +task->status = IXGBE_TASK_RUNNING;
> > +pthread_mutex_unlock(&ad->task_lock);
> > +
> > +if (task && task->task_cb)
> > +task->task_cb(task->arg);
> > +
> > +pthread_mutex_lock(&ad->task_lock);
> > +TAILQ_REMOVE(&ad->task_head, task, next); rte_free(task);
> > +pthread_mutex_unlock(&ad->task_lock);
> > +}
> > +
> > +pthread_mutex_lock(&ad->task_lock);
> > +while (!TAILQ_EMPTY(&ad->task_head)) { task =
> > +TAILQ_FIRST(&ad->task_head); TAILQ_REMOVE(&ad->task_head, task,
> > +next); rte_free(task); } pthread_mutex_unlock(&ad->task_lock);
> > +ad->task_status = IXGBE_TASK_THREAD_EXIT_DONE;
> > +
> > +return NULL;
> > +}
> > +
> > +static int ixgbe_task_thread_init(struct rte_eth_dev *dev) { struct
> > +ixgbe_adapter *ad = dev->data->dev_private; struct rte_pci_device
> > +*pci_dev = RTE_ETH_DEV_TO_PCI(dev); char
> > +name[IXGBE_TASK_THREAD_NAME_LEN];
> > +int ret;
> > +
> > +TAILQ_INIT(&ad->task_head);
> > +pthread_mutex_init(&ad->task_lock, NULL);
> > +pthread_cond_init(&ad->task_cond, NULL);
> > +
> > +snprintf(name, IXGBE_TASK_THREAD_NAME_LEN, "ixgbe-delay:%s",
> > +pci_dev->name);
> > +
> > +ret = rte_ctrl_thread_create(&ad->task_tid, name, NULL,
> > +     ixgbe_task_handler, dev);
> > +if (ret < 0) {
> > +PMD_INIT_LOG(ERR, "Create control thread %s fail!", name); return
> > +ret; }
> > +ad->task_status = IXGBE_TASK_THREAD_RUNNING;
> > +
> > +return 0;
> > +}
> > +
> > +static void ixgbe_task_thread_uninit(struct rte_eth_dev *dev) {
> > +struct ixgbe_adapter *ad = dev->data->dev_private; int i; #define
> > +MAX_EXIT_TIMEOUT  3000/* 3s */
> > +
> > +if (ad->task_status == IXGBE_TASK_THREAD_RUNNING) {
> > +ad->task_status = IXGBE_TASK_THREAD_EXIT;
> > +pthread_cond_signal(&ad->task_cond);
> > +for (i = 0; i < MAX_EXIT_TIMEOUT; i++) { if (ad->task_status ==
> > +IXGBE_TASK_THREAD_EXIT_DONE) { pthread_cond_destroy(&ad-
> >task_cond);
> > +pthread_mutex_destroy(&ad->task_lock);
> > +break;
> > +}
> > +rte_delay_us_sleep(1000);// 1ms
> > +}
> > +}
> > +}
> > +
> > +/*
> >   * This function is based on code in ixgbe_attach() in base/ixgbe.c.
> >   * It returns 0 on success.
> >   */
> > @@ -1301,6 +1470,7 @@ struct rte_ixgbe_xstats_name_off {
> >  /* enable support intr */
> >  ixgbe_enable_intr(eth_dev);
> >
> > +ixgbe_task_thread_init(eth_dev);
> >  ixgbe_dev_set_link_down(eth_dev);
> >
> >  /* initialize filter info */
> > @@ -1337,6 +1507,7 @@ struct rte_ixgbe_xstats_name_off {  return 0;
> >
> >  ixgbe_dev_close(eth_dev);
> > +ixgbe_task_thread_uninit(eth_dev);
> >
> >  return 0;
> >  }
> > @@ -1713,6 +1884,7 @@ static int ixgbe_l2_tn_filter_init(struct
> rte_eth_dev *eth_dev)
> >     ixgbevf_dev_interrupt_handler, eth_dev);
> > rte_intr_enable(intr_handle);  ixgbevf_intr_enable(eth_dev);
> > +ixgbe_task_thread_init(eth_dev);
> >
> >  PMD_INIT_LOG(DEBUG, "port %d vendorID=0x%x deviceID=0x%x
> mac.type=%s",
> >       eth_dev->data->port_id, pci_dev->id.vendor_id, @@ -1732,6
> > +1904,7 @@ static int ixgbe_l2_tn_filter_init(struct rte_eth_dev
> > *eth_dev)  return 0;
> >
> >  ixgbevf_dev_close(eth_dev);
> > +ixgbe_task_thread_uninit(eth_dev);
> >
> >  return 0;
> >  }
> > @@ -2570,7 +2743,7 @@ static int eth_ixgbevf_pci_remove(struct
> > rte_pci_device *pci_dev)  }
> >
> >  /* Stop the link setup handler before resetting the HW. */
> > -rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
> > +ixgbe_cancel_task(dev, ixgbe_dev_setup_link_alarm_handler);
> >
> >  /* disable uio/vfio intr/eventfd mapping */
> > rte_intr_disable(intr_handle); @@ -2842,7 +3015,7 @@ static int
> > eth_ixgbevf_pci_remove(struct rte_pci_device *pci_dev)
> >
> >  PMD_INIT_FUNC_TRACE();
> >
> > -rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
> > +ixgbe_cancel_task(dev, ixgbe_dev_setup_link_alarm_handler);
> >
> >  /* disable interrupts */
> >  ixgbe_disable_intr(hw);
> > @@ -4162,8 +4335,7 @@ static int
> > ixgbevf_dev_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
> if
> > (link_up == 0) {  if (ixgbe_get_media_type(hw) ==
> > ixgbe_media_type_fiber) {  intr->flags |=
> IXGBE_FLAG_NEED_LINK_CONFIG;
> > -rte_eal_alarm_set(10, -ixgbe_dev_setup_link_alarm_handler, dev);
> > +ixgbe_add_task(dev, ixgbe_dev_setup_link_alarm_handler);
> >  }
> >  return rte_eth_linkstatus_set(dev, &link);  } @@ -5207,7 +5379,7 @@
> > static int ixgbevf_dev_xstats_get_names(__rte_unused struct
> > rte_eth_dev *dev,  PMD_INIT_FUNC_TRACE();
> >
> >  /* Stop the link setup handler before resetting the HW. */
> > -rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
> > +ixgbe_cancel_task(dev, ixgbe_dev_setup_link_alarm_handler);
> >
> >  err = hw->mac.ops.reset_hw(hw);
> >  if (err) {
> > @@ -5305,7 +5477,7 @@ static int
> > ixgbevf_dev_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
> >
> >  PMD_INIT_FUNC_TRACE();
> >
> > -rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
> > +ixgbe_cancel_task(dev, ixgbe_dev_setup_link_alarm_handler);
> >
> >  ixgbevf_intr_disable(dev);
> >
> > diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h
> > b/drivers/net/ixgbe/ixgbe_ethdev.h
> > index 76a1b9d..4426349 100644
> > --- a/drivers/net/ixgbe/ixgbe_ethdev.h
> > +++ b/drivers/net/ixgbe/ixgbe_ethdev.h
> > @@ -470,6 +470,28 @@ struct ixgbe_tm_conf {  bool committed;  };
> >
> > +#define IXGBE_TASK_THREAD_NAME_LEN  64 enum
> { IXGBE_TASK_THREAD_EXIT
> > += 0, IXGBE_TASK_THREAD_RUNNING = 1,
> IXGBE_TASK_THREAD_EXIT_DONE = 2
> > +}; enum { IXGBE_TASK_READY = 0, IXGBE_TASK_RUNNING = 1,
> > +IXGBE_TASK_FINISH = 2 };
> > +
> > +typedef void (*ixgbe_task_cb_fn) (void *arg); struct ixgbe_task {
> > +TAILQ_ENTRY(ixgbe_task) next;
> > +void *arg;
> > +int status;
> > +ixgbe_task_cb_fn task_cb;
> > +};
> > +TAILQ_HEAD(ixgbe_task_head, ixgbe_task);
> > +
> > +
> >  /*
> >   * Structure to store private data for each driver instance (for each port).
> >   */
> > @@ -510,6 +532,13 @@ struct ixgbe_adapter {
> >   * mailbox status) link status.
> >   */
> >  uint8_t pflink_fullchk;
> > +
> > +/* Control thread per VF/PF, used for to do delay work */ pthread_t
> > +task_tid; struct ixgbe_task_head task_head; int task_status;
> > +pthread_mutex_t task_lock; pthread_cond_t task_cond;
> >  };
> >
> >  struct ixgbe_vf_representor {
> > @@ -760,6 +789,9 @@ void ixgbe_dev_macsec_setting_save(struct
> > rte_eth_dev *dev,  struct ixgbe_macsec_setting *macsec_setting);
> >
> >  void ixgbe_dev_macsec_setting_reset(struct rte_eth_dev *dev);
> > +int ixgbe_add_task(struct rte_eth_dev *dev, ixgbe_task_cb_fn
> > +task_cb); int ixgbe_cancel_task(struct rte_eth_dev *dev,
> > +ixgbe_task_cb_fn task_cb);
> > +
> >
> >  static inline int
> >  ixgbe_ethertype_filter_lookup(struct ixgbe_filter_info *filter_info,
> > --
> > 1.8.3.1
> 

Re: [dpdk-stable] [PATCH] net/ixgbe: fix blocking system events

[Ananyev, Konstantin]

Hi Tao,

> Thank you for your advice. Your advice is excellent. I have the same idea with you to solve this problem.
> First.  Consider whether the fallback function of alamer can shorten the time.
> But it seems difficult for the following reasons(If you have a good idea, please let me know):
> 	a. The entry of the fallback function is 'ixgbe_setup_mac_link_multispeed_fiber', It's a little more complicated
> 	b. This callback function not only has multiple sleeps, but also may have long sleep in other functions it calls
> 	c. The function called by the callback function has different implementations for different NIC
> 	d. This callback function and other functions it calls are all from ND's shared code. After modification, upgrading will cause
> trouble

Agree, I also don't see a way to overcome that problem
without reworking ixgbe/base code quite significantly.
Which obviously is not an option. 

> 
> So I use a separate thread to replace alarm, This thread is created using wrapper function: rte_ctrl_thread_create().
> A mechanism is provided to create a thread when PF or VF is initialized for the first time. This thread will select tasks from the task list
> in order to execute. If the task list is empty, the thread sleeps.
> Provides interface for adding and deleting tasks.
> The specific implementation is as follows(See patch for detailed implementation):
> 	a. Thread create function: ixgbe_task_thread_init, it will call rte_ctrl_thread_create to create thread
> 	b. Thread destroy function: ixgbe_task_thread_uninit
> 	c. Add task function: ixgbe_add_task, it add a task and wake up the sleeping thread
> 	d. Cancel task function: ixgbe_cancel_task, it cancel a task synchronously
> 
> The reason why a task queue is used to manage tasks is that there may be concurrent conflicts, because alarm has no concurrent
> conflicts.

Sorry, I probably wasn't clear in my previous mail.
I realized what you did, but I think it is not a good practice
to add task management thread/code into specific PMD.
If we do need such code, then it probably has to be generic enough and  be in EAL.
Though I wonder do we really need it for that case?
Can't we just spawn a thread to execute ixgbe_dev_setup_link_alarm_handler?
I.E just :
rte_ctrl_thread_create(&hw->link_thread, ...., ixgbe_dev_setup_link_alarm_handler, dev);
instead of rte_eal_alarm_set()
And pthread_cancel(&hw->link_thread); pthread_join(hw->link_thread);
Instead of rte_alarm_cancel().

> 
> BR,
> Zhu, Tao
> 
> > -----Original Message-----
> > From: Ananyev, Konstantin
> > Sent: Monday, December 30, 2019 9:58 PM
> > To: Zhu, TaoX <taox.zhu@intel.com>; konstantin.ananyev@intel.com
> > wenzhuo.lu@intel.com
> > Cc: dev@dpdk.org; stable@dpdk.org
> > Subject: RE: [PATCH] net/ixgbe: fix blocking system events
> >
> > Hi,
> >
> > > IXGBE link status task use rte alarm thread in old implementation.
> > > Sometime ixgbe link status task takes up to 9 seconds. This will
> > > severely affect the rte-alarm-thread-dependent a task in the system,
> > > like  interrupt or hotplug event. So replace with a independent thread
> > > which has the same thread affinity settings as rte interrupt.
> >
> >
> > I don't think it is a good idea to add into PMD code that creates/manages
> > new threads.
> > I think ideal would be to rework link setup code, so it can take less time
> > (make it interruptable/repeatable).
> > If that is not possible, and control function is the only way, there is a wrapper
> > function: rte_ctrl_thread_create() that can be used here instead of creating
> > your own framework.
> >
> >
> > >
> > > Fixes: 0408f47b ("net/ixgbe: fix busy polling while fiber link
> > > update")
> > > Cc: stable@dpdk.org
> > >
> > > Signed-off-by: Zhu Tao <taox.zhu@intel.com>
> > > ---
> > >  drivers/net/ixgbe/ixgbe_ethdev.c | 184
> > > +++++++++++++++++++++++++++++++++++++--
> > >  drivers/net/ixgbe/ixgbe_ethdev.h |  32 +++++++
> > >  2 files changed, 210 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c
> > > b/drivers/net/ixgbe/ixgbe_ethdev.c
> > > index 2c6fd0f..f0b387d 100644
> > > --- a/drivers/net/ixgbe/ixgbe_ethdev.c
> > > +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
> > > @@ -15,6 +15,7 @@
> > >  #include <rte_byteorder.h>
> > >  #include <rte_common.h>
> > >  #include <rte_cycles.h>
> > > +#include <rte_tailq.h>
> > >
> > >  #include <rte_interrupts.h>
> > >  #include <rte_log.h>
> > > @@ -378,6 +379,9 @@ static int ixgbe_dev_udp_tunnel_port_del(struct
> > rte_eth_dev *dev,
> > >   struct rte_eth_udp_tunnel *udp_tunnel);  static int
> > > ixgbe_filter_restore(struct rte_eth_dev *dev);  static void
> > > ixgbe_l2_tunnel_conf(struct rte_eth_dev *dev);
> > > +static int ixgbe_task_thread_init(struct rte_eth_dev *dev); static
> > > +void ixgbe_task_thread_uninit(struct rte_eth_dev *dev);
> > > +
> > >
> > >  /*
> > >   * Define VF Stats MACRO for Non "cleared on read" register @@
> > > -1069,6 +1073,171 @@ struct rte_ixgbe_xstats_name_off {  }
> > >
> > >  /*
> > > + * Add a task to task queue tail.
> > > + */
> > > +int ixgbe_add_task(struct rte_eth_dev *dev, ixgbe_task_cb_fn task_cb)
> > > +{ struct ixgbe_adapter *ad = dev->data->dev_private; struct
> > > +ixgbe_task *task;
> > > +
> > > +if (ad->task_status == IXGBE_TASK_THREAD_RUNNING) { task =
> > > +rte_zmalloc("ixgbe", sizeof(struct ixgbe_task), 0); if (task == NULL)
> > > +return -ENOMEM;
> > > +
> > > +task->arg = dev;
> > > +task->task_cb = task_cb;
> > > +task->status = IXGBE_TASK_READY;
> > > +
> > > +pthread_mutex_lock(&ad->task_lock);
> > > +TAILQ_INSERT_TAIL(&ad->task_head, task, next);
> > > +pthread_cond_signal(&ad->task_cond);
> > > +pthread_mutex_unlock(&ad->task_lock);
> > > +} else {
> > > +return -EPERM;/* Operation not permitted */ }
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +/*
> > > + * Sync cancel a task with all @task_cb be exit.
> > > + */
> > > +int ixgbe_cancel_task(struct rte_eth_dev *dev, ixgbe_task_cb_fn
> > > +task_cb) { struct ixgbe_adapter *ad = dev->data->dev_private; struct
> > > +ixgbe_task *task, *ttask; int i, executing;
> > > +#define DELAY_TIMEOUT_LOG   2000// 2s
> > > +#define DELAY_TIMEOUT_MAX   10000// 10s
> > > +
> > > +for (i = 0; i < DELAY_TIMEOUT_MAX; i++) { executing = 0; if
> > > +(ad->task_status == IXGBE_TASK_THREAD_RUNNING) {
> > > +pthread_mutex_lock(&ad->task_lock);
> > > +TAILQ_FOREACH_SAFE(task, &ad->task_head, next, ttask) { if
> > > +(task->task_cb == task_cb) { if (task->status == IXGBE_TASK_RUNNING)
> > > +{
> > > +executing++;
> > > +} else {
> > > +TAILQ_REMOVE(&ad->task_head, task, next); rte_free(task); } } }
> > > +pthread_mutex_unlock(&ad->task_lock);
> > > +
> > > +if (executing) {
> > > +if (i > DELAY_TIMEOUT_LOG && (i % 1000 == 0))
> > { PMD_DRV_LOG(WARNING,
> > > +    "Cannel task time wait %ds!", i / 1000); }
> > > +
> > > +rte_delay_us_sleep(1000);// 1ms
> > > +continue;
> > > +}
> > > +}
> > > +break;
> > > +}
> > > +
> > > +if (i == DELAY_TIMEOUT_MAX)
> > > +return -EBUSY;
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +/*
> > > + * Task main thread. Loop until state is set to IXGBE_TASK_THREAD_EXIT.
> > > + * For each task, set the status to IXGBE_TASK_RUNNING before
> > > +execution,
> > > + * execute and then be dequeue.
> > > + */
> > > +static void *ixgbe_task_handler(void *args) { struct ixgbe_adapter
> > > +*ad =
> > > +    ((struct rte_eth_dev *)args)->data->dev_private; struct
> > > +ixgbe_task *task;
> > > +
> > > +PMD_INIT_LOG(DEBUG, "ixgbe task thread created"); while
> > > +(ad->task_status) { pthread_mutex_lock(&ad->task_lock);
> > > +if (TAILQ_EMPTY(&ad->task_head)) {
> > > +pthread_cond_wait(&ad->task_cond, &ad->task_lock);
> > > +pthread_mutex_unlock(&ad->task_lock);
> > > +continue;
> > > +}
> > > +
> > > +/* pop firt task and run it */
> > > +task = TAILQ_FIRST(&ad->task_head);
> > > +task->status = IXGBE_TASK_RUNNING;
> > > +pthread_mutex_unlock(&ad->task_lock);
> > > +
> > > +if (task && task->task_cb)
> > > +task->task_cb(task->arg);
> > > +
> > > +pthread_mutex_lock(&ad->task_lock);
> > > +TAILQ_REMOVE(&ad->task_head, task, next); rte_free(task);
> > > +pthread_mutex_unlock(&ad->task_lock);
> > > +}
> > > +
> > > +pthread_mutex_lock(&ad->task_lock);
> > > +while (!TAILQ_EMPTY(&ad->task_head)) { task =
> > > +TAILQ_FIRST(&ad->task_head); TAILQ_REMOVE(&ad->task_head, task,
> > > +next); rte_free(task); } pthread_mutex_unlock(&ad->task_lock);
> > > +ad->task_status = IXGBE_TASK_THREAD_EXIT_DONE;
> > > +
> > > +return NULL;
> > > +}
> > > +
> > > +static int ixgbe_task_thread_init(struct rte_eth_dev *dev) { struct
> > > +ixgbe_adapter *ad = dev->data->dev_private; struct rte_pci_device
> > > +*pci_dev = RTE_ETH_DEV_TO_PCI(dev); char
> > > +name[IXGBE_TASK_THREAD_NAME_LEN];
> > > +int ret;
> > > +
> > > +TAILQ_INIT(&ad->task_head);
> > > +pthread_mutex_init(&ad->task_lock, NULL);
> > > +pthread_cond_init(&ad->task_cond, NULL);
> > > +
> > > +snprintf(name, IXGBE_TASK_THREAD_NAME_LEN, "ixgbe-delay:%s",
> > > +pci_dev->name);
> > > +
> > > +ret = rte_ctrl_thread_create(&ad->task_tid, name, NULL,
> > > +     ixgbe_task_handler, dev);
> > > +if (ret < 0) {
> > > +PMD_INIT_LOG(ERR, "Create control thread %s fail!", name); return
> > > +ret; }
> > > +ad->task_status = IXGBE_TASK_THREAD_RUNNING;
> > > +
> > > +return 0;
> > > +}
> > > +
> > > +static void ixgbe_task_thread_uninit(struct rte_eth_dev *dev) {
> > > +struct ixgbe_adapter *ad = dev->data->dev_private; int i; #define
> > > +MAX_EXIT_TIMEOUT  3000/* 3s */
> > > +
> > > +if (ad->task_status == IXGBE_TASK_THREAD_RUNNING) {
> > > +ad->task_status = IXGBE_TASK_THREAD_EXIT;
> > > +pthread_cond_signal(&ad->task_cond);
> > > +for (i = 0; i < MAX_EXIT_TIMEOUT; i++) { if (ad->task_status ==
> > > +IXGBE_TASK_THREAD_EXIT_DONE) { pthread_cond_destroy(&ad-
> > >task_cond);
> > > +pthread_mutex_destroy(&ad->task_lock);
> > > +break;
> > > +}
> > > +rte_delay_us_sleep(1000);// 1ms
> > > +}
> > > +}
> > > +}
> > > +
> > > +/*
> > >   * This function is based on code in ixgbe_attach() in base/ixgbe.c.
> > >   * It returns 0 on success.
> > >   */
> > > @@ -1301,6 +1470,7 @@ struct rte_ixgbe_xstats_name_off {
> > >  /* enable support intr */
> > >  ixgbe_enable_intr(eth_dev);
> > >
> > > +ixgbe_task_thread_init(eth_dev);
> > >  ixgbe_dev_set_link_down(eth_dev);
> > >
> > >  /* initialize filter info */
> > > @@ -1337,6 +1507,7 @@ struct rte_ixgbe_xstats_name_off {  return 0;
> > >
> > >  ixgbe_dev_close(eth_dev);
> > > +ixgbe_task_thread_uninit(eth_dev);
> > >
> > >  return 0;
> > >  }
> > > @@ -1713,6 +1884,7 @@ static int ixgbe_l2_tn_filter_init(struct
> > rte_eth_dev *eth_dev)
> > >     ixgbevf_dev_interrupt_handler, eth_dev);
> > > rte_intr_enable(intr_handle);  ixgbevf_intr_enable(eth_dev);
> > > +ixgbe_task_thread_init(eth_dev);
> > >
> > >  PMD_INIT_LOG(DEBUG, "port %d vendorID=0x%x deviceID=0x%x
> > mac.type=%s",
> > >       eth_dev->data->port_id, pci_dev->id.vendor_id, @@ -1732,6
> > > +1904,7 @@ static int ixgbe_l2_tn_filter_init(struct rte_eth_dev
> > > *eth_dev)  return 0;
> > >
> > >  ixgbevf_dev_close(eth_dev);
> > > +ixgbe_task_thread_uninit(eth_dev);
> > >
> > >  return 0;
> > >  }
> > > @@ -2570,7 +2743,7 @@ static int eth_ixgbevf_pci_remove(struct
> > > rte_pci_device *pci_dev)  }
> > >
> > >  /* Stop the link setup handler before resetting the HW. */
> > > -rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
> > > +ixgbe_cancel_task(dev, ixgbe_dev_setup_link_alarm_handler);
> > >
> > >  /* disable uio/vfio intr/eventfd mapping */
> > > rte_intr_disable(intr_handle); @@ -2842,7 +3015,7 @@ static int
> > > eth_ixgbevf_pci_remove(struct rte_pci_device *pci_dev)
> > >
> > >  PMD_INIT_FUNC_TRACE();
> > >
> > > -rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
> > > +ixgbe_cancel_task(dev, ixgbe_dev_setup_link_alarm_handler);
> > >
> > >  /* disable interrupts */
> > >  ixgbe_disable_intr(hw);
> > > @@ -4162,8 +4335,7 @@ static int
> > > ixgbevf_dev_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
> > if
> > > (link_up == 0) {  if (ixgbe_get_media_type(hw) ==
> > > ixgbe_media_type_fiber) {  intr->flags |=
> > IXGBE_FLAG_NEED_LINK_CONFIG;
> > > -rte_eal_alarm_set(10, -ixgbe_dev_setup_link_alarm_handler, dev);
> > > +ixgbe_add_task(dev, ixgbe_dev_setup_link_alarm_handler);
> > >  }
> > >  return rte_eth_linkstatus_set(dev, &link);  } @@ -5207,7 +5379,7 @@
> > > static int ixgbevf_dev_xstats_get_names(__rte_unused struct
> > > rte_eth_dev *dev,  PMD_INIT_FUNC_TRACE();
> > >
> > >  /* Stop the link setup handler before resetting the HW. */
> > > -rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
> > > +ixgbe_cancel_task(dev, ixgbe_dev_setup_link_alarm_handler);
> > >
> > >  err = hw->mac.ops.reset_hw(hw);
> > >  if (err) {
> > > @@ -5305,7 +5477,7 @@ static int
> > > ixgbevf_dev_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
> > >
> > >  PMD_INIT_FUNC_TRACE();
> > >
> > > -rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
> > > +ixgbe_cancel_task(dev, ixgbe_dev_setup_link_alarm_handler);
> > >
> > >  ixgbevf_intr_disable(dev);
> > >
> > > diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h
> > > b/drivers/net/ixgbe/ixgbe_ethdev.h
> > > index 76a1b9d..4426349 100644
> > > --- a/drivers/net/ixgbe/ixgbe_ethdev.h
> > > +++ b/drivers/net/ixgbe/ixgbe_ethdev.h
> > > @@ -470,6 +470,28 @@ struct ixgbe_tm_conf {  bool committed;  };
> > >
> > > +#define IXGBE_TASK_THREAD_NAME_LEN  64 enum
> > { IXGBE_TASK_THREAD_EXIT
> > > += 0, IXGBE_TASK_THREAD_RUNNING = 1,
> > IXGBE_TASK_THREAD_EXIT_DONE = 2
> > > +}; enum { IXGBE_TASK_READY = 0, IXGBE_TASK_RUNNING = 1,
> > > +IXGBE_TASK_FINISH = 2 };
> > > +
> > > +typedef void (*ixgbe_task_cb_fn) (void *arg); struct ixgbe_task {
> > > +TAILQ_ENTRY(ixgbe_task) next;
> > > +void *arg;
> > > +int status;
> > > +ixgbe_task_cb_fn task_cb;
> > > +};
> > > +TAILQ_HEAD(ixgbe_task_head, ixgbe_task);
> > > +
> > > +
> > >  /*
> > >   * Structure to store private data for each driver instance (for each port).
> > >   */
> > > @@ -510,6 +532,13 @@ struct ixgbe_adapter {
> > >   * mailbox status) link status.
> > >   */
> > >  uint8_t pflink_fullchk;
> > > +
> > > +/* Control thread per VF/PF, used for to do delay work */ pthread_t
> > > +task_tid; struct ixgbe_task_head task_head; int task_status;
> > > +pthread_mutex_t task_lock; pthread_cond_t task_cond;
> > >  };
> > >
> > >  struct ixgbe_vf_representor {
> > > @@ -760,6 +789,9 @@ void ixgbe_dev_macsec_setting_save(struct
> > > rte_eth_dev *dev,  struct ixgbe_macsec_setting *macsec_setting);
> > >
> > >  void ixgbe_dev_macsec_setting_reset(struct rte_eth_dev *dev);
> > > +int ixgbe_add_task(struct rte_eth_dev *dev, ixgbe_task_cb_fn
> > > +task_cb); int ixgbe_cancel_task(struct rte_eth_dev *dev,
> > > +ixgbe_task_cb_fn task_cb);
> > > +
> > >
> > >  static inline int
> > >  ixgbe_ethertype_filter_lookup(struct ixgbe_filter_info *filter_info,
> > > --
> > > 1.8.3.1
> >
> 

[dpdk-stable] [PATCH v2] net/ixgbe: fix blocking system events

[taox.zhu]

From: Zhu Tao <taox.zhu@intel.com>

IXGBE link status task use rte alarm thread in old implementation.
Sometime ixgbe link status task takes up to 9 seconds. This will
severely affect the rte-alarm-thread-dependent a task in the
system, like interrupt or hotplug event. So replace with a
independent thread which has the same thread affinity settings
as rte interrupt.

Fixes: 0408f47b ("net/ixgbe: fix busy polling while fiber link update")
Cc: stable@dpdk.org

Signed-off-by: Zhu Tao <taox.zhu@intel.com>
---
 drivers/net/ixgbe/ixgbe_ethdev.c | 50 +++++++++++++++++++++++++++-----
 drivers/net/ixgbe/ixgbe_ethdev.h |  2 ++
 2 files changed, 44 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 7ea1962f6..2d692e54c 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -229,7 +229,8 @@ static int ixgbe_dev_interrupt_get_status(struct rte_eth_dev *dev);
 static int ixgbe_dev_interrupt_action(struct rte_eth_dev *dev);
 static void ixgbe_dev_interrupt_handler(void *param);
 static void ixgbe_dev_interrupt_delayed_handler(void *param);
-static void ixgbe_dev_setup_link_alarm_handler(void *param);
+static void *ixgbe_dev_setup_link_thread_handler(void *param);
+static void ixgbe_dev_cannel_link_thread(struct rte_eth_dev *dev);
 
 static int ixgbe_add_rar(struct rte_eth_dev *dev,
 			struct rte_ether_addr *mac_addr,
@@ -1078,6 +1079,7 @@ ixgbe_swfw_lock_reset(struct ixgbe_hw *hw)
 static int
 eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
 {
+	struct ixgbe_adapter *ad = eth_dev->data->dev_private;
 	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
 	struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
 	struct ixgbe_hw *hw =
@@ -1129,6 +1131,7 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
 		return 0;
 	}
 
+	rte_atomic32_clear(&ad->link_thread_running);
 	rte_eth_copy_pci_info(eth_dev, pci_dev);
 
 	/* Vendor and Device ID need to be set before init of shared code */
@@ -1567,6 +1570,7 @@ eth_ixgbevf_dev_init(struct rte_eth_dev *eth_dev)
 {
 	int diag;
 	uint32_t tc, tcs;
+	struct ixgbe_adapter *ad = eth_dev->data->dev_private;
 	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
 	struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
 	struct ixgbe_hw *hw =
@@ -1607,6 +1611,7 @@ eth_ixgbevf_dev_init(struct rte_eth_dev *eth_dev)
 		return 0;
 	}
 
+	rte_atomic32_clear(&ad->link_thread_running);
 	ixgbevf_parse_devargs(eth_dev->data->dev_private,
 			      pci_dev->device.devargs);
 
@@ -2563,7 +2568,7 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
 	PMD_INIT_FUNC_TRACE();
 
 	/* Stop the link setup handler before resetting the HW. */
-	rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
+	ixgbe_dev_cannel_link_thread(dev);
 
 	/* disable uio/vfio intr/eventfd mapping */
 	rte_intr_disable(intr_handle);
@@ -2844,7 +2849,7 @@ ixgbe_dev_stop(struct rte_eth_dev *dev)
 
 	PMD_INIT_FUNC_TRACE();
 
-	rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
+	ixgbe_dev_cannel_link_thread(dev);
 
 	/* disable interrupts */
 	ixgbe_disable_intr(hw);
@@ -4098,9 +4103,23 @@ ixgbevf_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
 }
 
 static void
-ixgbe_dev_setup_link_alarm_handler(void *param)
+ixgbe_dev_cannel_link_thread(struct rte_eth_dev *dev)
+{
+	struct ixgbe_adapter *ad = dev->data->dev_private;
+	void *retval;
+
+	if (rte_atomic32_read(&ad->link_thread_running)) {
+		pthread_cancel(ad->link_thread_tid);
+		pthread_join(ad->link_thread_tid, &retval);
+		rte_atomic32_clear(&ad->link_thread_running);
+	}
+}
+
+static void *
+ixgbe_dev_setup_link_thread_handler(void *param)
 {
 	struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
+	struct ixgbe_adapter *ad = dev->data->dev_private;
 	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 	struct ixgbe_interrupt *intr =
 		IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
@@ -4114,6 +4133,8 @@ ixgbe_dev_setup_link_alarm_handler(void *param)
 	ixgbe_setup_link(hw, speed, true);
 
 	intr->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
+	rte_atomic32_clear(&ad->link_thread_running);
+	return NULL;
 }
 
 /*
@@ -4153,6 +4174,7 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
 			    int wait_to_complete, int vf)
 {
 	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	struct ixgbe_adapter *ad = dev->data->dev_private;
 	struct rte_eth_link link;
 	ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
 	struct ixgbe_interrupt *intr =
@@ -4198,8 +4220,20 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
 	if (link_up == 0) {
 		if (ixgbe_get_media_type(hw) == ixgbe_media_type_fiber) {
 			intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
-			rte_eal_alarm_set(10,
-				ixgbe_dev_setup_link_alarm_handler, dev);
+			if (rte_atomic32_test_and_set(&ad->link_thread_running)) {
+				if (rte_ctrl_thread_create(&ad->link_thread_tid,
+					"ixgbe-link-handler",
+					NULL,
+					ixgbe_dev_setup_link_thread_handler,
+					dev) < 0) {
+					PMD_DRV_LOG(ERR,
+						"Create link thread failed!");
+					rte_atomic32_clear(&ad->link_thread_running);
+				}
+			} else {
+				PMD_DRV_LOG(ERR,
+					"Other link thread is running now!");
+			}
 		}
 		return rte_eth_linkstatus_set(dev, &link);
 	}
@@ -5243,7 +5277,7 @@ ixgbevf_dev_start(struct rte_eth_dev *dev)
 	PMD_INIT_FUNC_TRACE();
 
 	/* Stop the link setup handler before resetting the HW. */
-	rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
+	ixgbe_dev_cannel_link_thread(dev);
 
 	err = hw->mac.ops.reset_hw(hw);
 	if (err) {
@@ -5341,7 +5375,7 @@ ixgbevf_dev_stop(struct rte_eth_dev *dev)
 
 	PMD_INIT_FUNC_TRACE();
 
-	rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
+	ixgbe_dev_cannel_link_thread(dev);
 
 	ixgbevf_intr_disable(dev);
 
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
index e1cd8fd16..5089347a7 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.h
+++ b/drivers/net/ixgbe/ixgbe_ethdev.h
@@ -511,6 +511,8 @@ struct ixgbe_adapter {
 	 * mailbox status) link status.
 	 */
 	uint8_t pflink_fullchk;
+	rte_atomic32_t link_thread_running;
+	pthread_t link_thread_tid;
 };
 
 struct ixgbe_vf_representor {
-- 
2.17.1

Re: [dpdk-stable] [PATCH v2] net/ixgbe: fix blocking system events

[Ananyev, Konstantin]

> IXGBE link status task use rte alarm thread in old implementation.
> Sometime ixgbe link status task takes up to 9 seconds. This will
> severely affect the rte-alarm-thread-dependent a task in the
> system, like interrupt or hotplug event. So replace with a
> independent thread which has the same thread affinity settings
> as rte interrupt.
> 
> Fixes: 0408f47b ("net/ixgbe: fix busy polling while fiber link update")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Zhu Tao <taox.zhu@intel.com>
> ---

Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

> 2.17.1

Re: [dpdk-stable] [dpdk-dev] [PATCH v2] net/ixgbe: fix blocking system events

[Ye Xiaolong]

On 01/15, taox.zhu@intel.com wrote:
>From: Zhu Tao <taox.zhu@intel.com>
>
>IXGBE link status task use rte alarm thread in old implementation.
>Sometime ixgbe link status task takes up to 9 seconds. This will
>severely affect the rte-alarm-thread-dependent a task in the

What does "rte-alarm-thread-dependent a task" mean?

Thanks,
Xiaolong

>system, like interrupt or hotplug event. So replace with a
>independent thread which has the same thread affinity settings
>as rte interrupt.
>
>Fixes: 0408f47b ("net/ixgbe: fix busy polling while fiber link update")
>Cc: stable@dpdk.org
>
>Signed-off-by: Zhu Tao <taox.zhu@intel.com>

Re: [dpdk-stable] [dpdk-dev] [PATCH v2] net/ixgbe: fix blocking system events

[Ye Xiaolong]

On 01/15, taox.zhu@intel.com wrote:
>From: Zhu Tao <taox.zhu@intel.com>
>
>IXGBE link status task use rte alarm thread in old implementation.

s/use/uses

>Sometime ixgbe link status task takes up to 9 seconds. This will
>severely affect the rte-alarm-thread-dependent a task in the
>system, like interrupt or hotplug event. So replace with a

s/a/an

>independent thread which has the same thread affinity settings
>as rte interrupt.
>
>Fixes: 0408f47b ("net/ixgbe: fix busy polling while fiber link update")

Should be:

Fixes: 0408f47ba4d6 ("net/ixgbe: fix busy polling while fiber link update")

>Cc: stable@dpdk.org
>

Applied to dpdk-next-net-intel with Konstantin's ack, Thanks.

Re: [dpdk-stable] [dpdk-dev] [PATCH v2] net/ixgbe: fix blocking system events

[Ferruh Yigit]

On 2/15/2020 3:41 PM, Ye Xiaolong wrote:
> On 01/15, taox.zhu@intel.com wrote:
>> From: Zhu Tao <taox.zhu@intel.com>
>>
>> IXGBE link status task use rte alarm thread in old implementation.
> 
> s/use/uses
> 
>> Sometime ixgbe link status task takes up to 9 seconds. This will
>> severely affect the rte-alarm-thread-dependent a task in the
>> system, like interrupt or hotplug event. So replace with a
> 
> s/a/an
> 
>> independent thread which has the same thread affinity settings
>> as rte interrupt.
>>
>> Fixes: 0408f47b ("net/ixgbe: fix busy polling while fiber link update")
> 
> Should be:
> 
> Fixes: 0408f47ba4d6 ("net/ixgbe: fix busy polling while fiber link update")
> 
>> Cc: stable@dpdk.org
>>
> 
> Applied to dpdk-next-net-intel with Konstantin's ack, Thanks.
> 

Shared build is failing because of missing pthread library, fixing while merging
to next-net:

 diff --git a/drivers/net/ixgbe/Makefile b/drivers/net/ixgbe/Makefile
 index 8b9d51f75..aec56a680 100644
 --- a/drivers/net/ixgbe/Makefile
 +++ b/drivers/net/ixgbe/Makefile
 @@ -57,6 +57,7 @@ endif
  LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
  LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs -lrte_hash
  LDLIBS += -lrte_bus_pci
 +LDLIBS += -lpthread

  #
  # Add extra flags for base driver files (also known as shared code)

Re: [dpdk-stable] [dpdk-dev] [PATCH v2] net/ixgbe: fix blocking system events

[Thomas Monjalon]

17/02/2020 14:01, Ferruh Yigit:
> On 2/15/2020 3:41 PM, Ye Xiaolong wrote:
> > On 01/15, taox.zhu@intel.com wrote:
> >> From: Zhu Tao <taox.zhu@intel.com>
> >>
> >> IXGBE link status task use rte alarm thread in old implementation.
> > 
> > s/use/uses
> > 
> >> Sometime ixgbe link status task takes up to 9 seconds. This will
> >> severely affect the rte-alarm-thread-dependent a task in the
> >> system, like interrupt or hotplug event. So replace with a
> > 
> > s/a/an
> > 
> >> independent thread which has the same thread affinity settings
> >> as rte interrupt.
> >>
> >> Fixes: 0408f47b ("net/ixgbe: fix busy polling while fiber link update")
> > 
> > Should be:
> > 
> > Fixes: 0408f47ba4d6 ("net/ixgbe: fix busy polling while fiber link update")
> > 
> >> Cc: stable@dpdk.org
> >>
> > 
> > Applied to dpdk-next-net-intel with Konstantin's ack, Thanks.
> > 
> 
> Shared build is failing because of missing pthread library, fixing while merging
> to next-net:

One more thing looks strange in this patch:
	ixgbe_dev_cannel_link_thread
Should it be
	ixgbe_dev_cancel_link_thread
?

Note: I looked at it because I am not sure multiplying the interrupt
threads is a good idea.
Basically the link status management is too long in this driver.
Instead of fixing the root cause, you move the annoying workload
somewhere else. But it is still there...

Please could you work on a long term fix?

Re: [dpdk-stable] [dpdk-dev] [PATCH v2] net/ixgbe: fix blocking system events

[Zhu, TaoX]

Hi Thomas
 
Thank you for your correction spelling error of 'cancel'.

Indeed it is not the best solution by creating a thread. I refer to the same solution with Linux kernel driver. Linux kernel driver manages link status by using a thread. Maybe we can figure out another better solution to fix this problem but it may take much more time. At this time, 20.02 formal release is coming and this problem affect some basic library. 
Tks for your understanding.


BR,
Zhu, Tao


> -----Original Message-----
> From: Thomas Monjalon [mailto:thomas@monjalon.net]
> Sent: Thursday, February 20, 2020 11:37 PM
> To: Ye, Xiaolong <xiaolong.ye@intel.com>; Zhu, TaoX <taox.zhu@intel.com>;
> Yigit, Ferruh <ferruh.yigit@intel.com>
> Cc: dev@dpdk.org; Ananyev, Konstantin <konstantin.ananyev@intel.com>;
> Lu, Wenzhuo <wenzhuo.lu@intel.com>; stable@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v2] net/ixgbe: fix blocking system events
> 
> 17/02/2020 14:01, Ferruh Yigit:
> > On 2/15/2020 3:41 PM, Ye Xiaolong wrote:
> > > On 01/15, taox.zhu@intel.com wrote:
> > >> From: Zhu Tao <taox.zhu@intel.com>
> > >>
> > >> IXGBE link status task use rte alarm thread in old implementation.
> > >
> > > s/use/uses
> > >
> > >> Sometime ixgbe link status task takes up to 9 seconds. This will
> > >> severely affect the rte-alarm-thread-dependent a task in the
> > >> system, like interrupt or hotplug event. So replace with a
> > >
> > > s/a/an
> > >
> > >> independent thread which has the same thread affinity settings as
> > >> rte interrupt.
> > >>
> > >> Fixes: 0408f47b ("net/ixgbe: fix busy polling while fiber link
> > >> update")
> > >
> > > Should be:
> > >
> > > Fixes: 0408f47ba4d6 ("net/ixgbe: fix busy polling while fiber link
> > > update")
> > >
> > >> Cc: stable@dpdk.org
> > >>
> > >
> > > Applied to dpdk-next-net-intel with Konstantin's ack, Thanks.
> > >
> >
> > Shared build is failing because of missing pthread library, fixing
> > while merging to next-net:
> 
> One more thing looks strange in this patch:
> 	ixgbe_dev_cannel_link_thread
> Should it be
> 	ixgbe_dev_cancel_link_thread
> ?
> 
> Note: I looked at it because I am not sure multiplying the interrupt threads is
> a good idea.
> Basically the link status management is too long in this driver.
> Instead of fixing the root cause, you move the annoying workload
> somewhere else. But it is still there...
> 
> Please could you work on a long term fix?
> 

Re: [dpdk-stable] [dpdk-dev] [PATCH v2] net/ixgbe: fix blocking system events

[Thomas Monjalon]

21/02/2020 09:19, Zhu, TaoX:
> Hi Thomas
>  
> Thank you for your correction spelling error of 'cancel'.
> 
> Indeed it is not the best solution by creating a thread. I refer to the same solution with Linux kernel driver. Linux kernel driver manages link status by using a thread. Maybe we can figure out another better solution to fix this problem but it may take much more time. At this time, 20.02 formal release is coming and this problem affect some basic library. 
> Tks for your understanding.

I understand, that's why I already accepted this patch in mainline (while fixing typo).

Please it would be really appreciated to work on a better solution.



> > -----Original Message-----
> > From: Thomas Monjalon [mailto:thomas@monjalon.net]
> > Sent: Thursday, February 20, 2020 11:37 PM
> > To: Ye, Xiaolong <xiaolong.ye@intel.com>; Zhu, TaoX <taox.zhu@intel.com>;
> > Yigit, Ferruh <ferruh.yigit@intel.com>
> > Cc: dev@dpdk.org; Ananyev, Konstantin <konstantin.ananyev@intel.com>;
> > Lu, Wenzhuo <wenzhuo.lu@intel.com>; stable@dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH v2] net/ixgbe: fix blocking system events
> > 
> > 17/02/2020 14:01, Ferruh Yigit:
> > > On 2/15/2020 3:41 PM, Ye Xiaolong wrote:
> > > > On 01/15, taox.zhu@intel.com wrote:
> > > >> From: Zhu Tao <taox.zhu@intel.com>
> > > >>
> > > >> IXGBE link status task use rte alarm thread in old implementation.
> > > >
> > > > s/use/uses
> > > >
> > > >> Sometime ixgbe link status task takes up to 9 seconds. This will
> > > >> severely affect the rte-alarm-thread-dependent a task in the
> > > >> system, like interrupt or hotplug event. So replace with a
> > > >
> > > > s/a/an
> > > >
> > > >> independent thread which has the same thread affinity settings as
> > > >> rte interrupt.
> > > >>
> > > >> Fixes: 0408f47b ("net/ixgbe: fix busy polling while fiber link
> > > >> update")
> > > >
> > > > Should be:
> > > >
> > > > Fixes: 0408f47ba4d6 ("net/ixgbe: fix busy polling while fiber link
> > > > update")
> > > >
> > > >> Cc: stable@dpdk.org
> > > >>
> > > >
> > > > Applied to dpdk-next-net-intel with Konstantin's ack, Thanks.
> > > >
> > >
> > > Shared build is failing because of missing pthread library, fixing
> > > while merging to next-net:
> > 
> > One more thing looks strange in this patch:
> > 	ixgbe_dev_cannel_link_thread
> > Should it be
> > 	ixgbe_dev_cancel_link_thread
> > ?
> > 
> > Note: I looked at it because I am not sure multiplying the interrupt threads is
> > a good idea.
> > Basically the link status management is too long in this driver.
> > Instead of fixing the root cause, you move the annoying workload
> > somewhere else. But it is still there...
> > 
> > Please could you work on a long term fix?
> > 
> 
>