[dpdk-stable] [PATCH] net/ixgbe: fix all queues drop setting of DCB

[Wenzhuo Lu <wenzhuo.lu@intel.com>]

DCB is split to RX and TX mode. All-queues-drop is set
for TX mode. It's not appropriate because all-queue-drop
is a RX feature. Move this setting from TX to RX.

Fixes: 0807f80d35d0 (ixgbe: DCB / flow control)
CC: stable@dpdk.org

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
---
 drivers/net/ixgbe/ixgbe_rxtx.c | 38 +++++++++++++++++++++-----------------
 1 file changed, 21 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
index 9502432..0368c66 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.c
+++ b/drivers/net/ixgbe/ixgbe_rxtx.c
@@ -3375,7 +3375,6 @@ void __attribute__((cold))
 		       struct ixgbe_dcb_config *dcb_config)
 {
 	uint32_t reg;
-	uint32_t q;
 	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 
 	PMD_INIT_FUNC_TRACE();
@@ -3395,18 +3394,6 @@ void __attribute__((cold))
 			reg |= IXGBE_MTQC_VT_ENA;
 		IXGBE_WRITE_REG(hw, IXGBE_MTQC, reg);
 
-		if (RTE_ETH_DEV_SRIOV(dev).active == 0) {
-			/* Disable drop for all queues in VMDQ mode*/
-			for (q = 0; q < 128; q++)
-				IXGBE_WRITE_REG(hw, IXGBE_QDE,
-						(IXGBE_QDE_WRITE | (q << IXGBE_QDE_IDX_SHIFT)));
-		} else {
-			/* Enable drop for all queues in SRIOV mode */
-			for (q = 0; q < 128; q++)
-				IXGBE_WRITE_REG(hw, IXGBE_QDE,
-						(IXGBE_QDE_WRITE | (q << IXGBE_QDE_IDX_SHIFT) | IXGBE_QDE_ENABLE));
-		}
-
 		/* Enable the Tx desc arbiter */
 		reg = IXGBE_READ_REG(hw, IXGBE_RTTDCS);
 		reg &= ~IXGBE_RTTDCS_ARBDIS;
@@ -3540,16 +3527,18 @@ void __attribute__((cold))
 
 /**
  * ixgbe_dcb_rx_hw_config - Configure general DCB RX HW parameters
- * @hw: pointer to hardware structure
+ * @dev: pointer to eth_dev structure
  * @dcb_config: pointer to ixgbe_dcb_config structure
  */
 static void
-ixgbe_dcb_rx_hw_config(struct ixgbe_hw *hw,
-	       struct ixgbe_dcb_config *dcb_config)
+ixgbe_dcb_rx_hw_config(struct rte_eth_dev *dev,
+		       struct ixgbe_dcb_config *dcb_config)
 {
 	uint32_t reg;
 	uint32_t vlanctrl;
 	uint8_t i;
+	uint32_t q;
+	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 
 	PMD_INIT_FUNC_TRACE();
 	/*
@@ -3587,6 +3576,21 @@ void __attribute__((cold))
 		}
 
 		IXGBE_WRITE_REG(hw, IXGBE_MRQC, reg);
+
+		if (RTE_ETH_DEV_SRIOV(dev).active == 0) {
+			/* Disable drop for all queues in VMDQ mode*/
+			for (q = 0; q < IXGBE_MAX_RX_QUEUE_NUM; q++)
+				IXGBE_WRITE_REG(hw, IXGBE_QDE,
+						(IXGBE_QDE_WRITE |
+						 (q << IXGBE_QDE_IDX_SHIFT)));
+		} else {
+			/* Enable drop for all queues in SRIOV mode */
+			for (q = 0; q < IXGBE_MAX_RX_QUEUE_NUM; q++)
+				IXGBE_WRITE_REG(hw, IXGBE_QDE,
+						(IXGBE_QDE_WRITE |
+						 (q << IXGBE_QDE_IDX_SHIFT) |
+						 IXGBE_QDE_ENABLE));
+		}
 	}
 
 	/* VLNCTRL: enable vlan filtering and allow all vlan tags through */
@@ -3699,7 +3703,7 @@ void __attribute__((cold))
 		/* Get dcb TX configuration parameters from rte_eth_conf */
 		ixgbe_dcb_rx_config(dev, dcb_config);
 		/*Configure general DCB RX parameters*/
-		ixgbe_dcb_rx_hw_config(hw, dcb_config);
+		ixgbe_dcb_rx_hw_config(dev, dcb_config);
 		break;
 	default:
 		PMD_INIT_LOG(ERR, "Incorrect DCB RX mode configuration");
-- 
1.9.3