patches for DPDK stable branches
 help / color / mirror / Atom feed
* [dpdk-stable] [dpdk-dev v2 1/3] app: enable HW CRC strip by default
@ 2017-05-21 12:14 Jeff Guo
  2017-05-21 12:14 ` [dpdk-stable] [dpdk-dev v2 2/3] test: " Jeff Guo
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Jeff Guo @ 2017-05-21 12:14 UTC (permalink / raw)
  To: helin.zhang, jingjing.wu; +Cc: stable, jia.guo

[ backported from upstream commit 79dd163fcaac74006ab607b6c0d1baacc9c40d92 ]

Since VF can not disable/enable HW CRC strip for non-DPDK PF drivers,
and kernel driver almost default enable that feature, if disable it in
app's rxmode, VF driver will report the VF launch failure. So this
patch default to enable HW CRC strip to let VF launch successful.

Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
---
v2: split patch to sync up with upstream commit
---
 app/test-pmd/parameters.c                   | 8 ++++----
 app/test-pmd/testpmd.c                      | 2 +-
 doc/guides/nics/thunderx.rst                | 2 +-
 doc/guides/testpmd_app_ug/run_app.rst       | 4 ++--
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 4 ++--
 5 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 08e5a76..2f96953 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -148,7 +148,7 @@ usage(char* progname)
 	       "the packet will be enqueued into the rx drop-queue. "
 	       "If the drop-queue doesn't exist, the packet is dropped. "
 	       "By default drop-queue=127.\n");
-	printf("  --crc-strip: enable CRC stripping by hardware.\n");
+	printf("  --disable-crc-strip: disable CRC stripping by hardware.\n");
 	printf("  --enable-lro: enable large receive offload.\n");
 	printf("  --enable-rx-cksum: enable rx hardware checksum offload.\n");
 	printf("  --disable-hw-vlan: disable hardware vlan.\n");
@@ -525,7 +525,7 @@ launch_args_parse(int argc, char** argv)
 		{ "pkt-filter-report-hash",     1, 0, 0 },
 		{ "pkt-filter-size",            1, 0, 0 },
 		{ "pkt-filter-drop-queue",      1, 0, 0 },
-		{ "crc-strip",                  0, 0, 0 },
+		{ "disable-crc-strip",                  0, 0, 0 },
 		{ "enable-lro",                 0, 0, 0 },
 		{ "enable-rx-cksum",            0, 0, 0 },
 		{ "enable-scatter",             0, 0, 0 },
@@ -765,8 +765,8 @@ launch_args_parse(int argc, char** argv)
 						 "drop queue %d invalid - must"
 						 "be >= 0 \n", n);
 			}
-			if (!strcmp(lgopts[opt_idx].name, "crc-strip"))
-				rx_mode.hw_strip_crc = 1;
+			if (!strcmp(lgopts[opt_idx].name, "disable-crc-strip"))
+				rx_mode.hw_strip_crc = 0;
 			if (!strcmp(lgopts[opt_idx].name, "enable-lro"))
 				rx_mode.enable_lro = 1;
 			if (!strcmp(lgopts[opt_idx].name, "enable-scatter"))
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index a0332c2..523055c 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -283,7 +283,7 @@ struct rte_eth_rxmode rx_mode = {
 	.hw_vlan_strip  = 1, /**< VLAN strip enabled. */
 	.hw_vlan_extend = 0, /**< Extended VLAN disabled. */
 	.jumbo_frame    = 0, /**< Jumbo Frame Support disabled. */
-	.hw_strip_crc   = 0, /**< CRC stripping by hardware disabled. */
+	.hw_strip_crc   = 1, /**< CRC stripping by hardware enabled. */
 };
 
 struct rte_fdir_conf fdir_conf = {
diff --git a/doc/guides/nics/thunderx.rst b/doc/guides/nics/thunderx.rst
index 187c9a4..b12cc8e 100644
--- a/doc/guides/nics/thunderx.rst
+++ b/doc/guides/nics/thunderx.rst
@@ -156,7 +156,7 @@ managed by ``librte_pmd_thunderx_nicvf`` in the Linux operating system.
    .. code-block:: console
 
       ./arm64-thunderx-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0002:01:00.2 \
-        -- -i --disable-hw-vlan-filter --crc-strip --no-flush-rx \
+        -- -i --disable-hw-vlan-filter --no-flush-rx \
         --port-topology=loop
 
    Example output:
diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
index d7c5120..ac7d458 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -281,9 +281,9 @@ The commandline options are:
     In perfect filter mode, when a rule is added with queue = -1, the packet will be enqueued into the RX drop-queue.
     If the drop-queue does not exist, the packet is dropped. The default value is N=127.
 
-*   ``--crc-strip``
+*   ``--disable-crc-strip``
 
-    Enable hardware CRC stripping.
+    Disable hardware CRC stripping.
 
 *   ``--enable-lro``
 
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index f1c269a..70d2e4d 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1257,9 +1257,9 @@ Set hardware CRC stripping on or off for all ports::
 
    testpmd> port config all crc-strip (on|off)
 
-CRC stripping is off by default.
+CRC stripping is on by default.
 
-The ``on`` option is equivalent to the ``--crc-strip`` command-line option.
+The ``off`` option is equivalent to the ``--disable-crc-strip`` command-line option.
 
 port config - scatter
 ~~~~~~~~~~~~~~~~~~~~~~~
-- 
2.7.4

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2017-05-22  1:31 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-05-21 12:14 [dpdk-stable] [dpdk-dev v2 1/3] app: enable HW CRC strip by default Jeff Guo
2017-05-21 12:14 ` [dpdk-stable] [dpdk-dev v2 2/3] test: " Jeff Guo
2017-05-21 12:14 ` [dpdk-stable] [dpdk-dev v2 3/3] examples: " Jeff Guo
2017-05-22  1:26 ` [dpdk-stable] [dpdk-dev v2 1/3] app: " Yuanhan Liu

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).