[dpdk-stable] patch 'net/bnxt: fix set link config' has been queued to LTS release 16.11.3

[Yuanhan Liu <yliu@fridaylinux.org>]

Hi,

FYI, your patch has been queued to LTS release 16.11.3

Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 07/19/17. So please
shout if anyone has objections.

Thanks.

	--yliu

---
>From 30746283838f1b9d6b96493d2fbd0b20883f56fa Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajit.khaparde@broadcom.com>
Date: Fri, 30 Jun 2017 09:20:20 -0500
Subject: [PATCH] net/bnxt: fix set link config

[ upstream commit 63d499f0c4ad4f02d8c7bbd0e36b57a97307ba71 ]

bnxt_hwrm_port_phy_cfg() was not setting enables appropriately.
This was causing undesired issues with link config.
This patch takes care of that.

Fixes: 7bc8e9a227cc ("net/bnxt: support async link notification")

Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
 drivers/net/bnxt/bnxt_hwrm.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index c26837c..fef010f 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -476,6 +476,8 @@ static int bnxt_hwrm_port_phy_cfg(struct bnxt *bp, struct bnxt_link_info *conf)
 	struct hwrm_port_phy_cfg_input req = {0};
 	struct hwrm_port_phy_cfg_output *resp = bp->hwrm_cmd_resp_addr;
 	uint32_t enables = 0;
+	uint32_t link_speed_mask =
+		HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED_MASK;
 
 	HWRM_PREP(req, PORT_PHY_CFG, -1, resp);
 
@@ -487,14 +489,20 @@ static int bnxt_hwrm_port_phy_cfg(struct bnxt *bp, struct bnxt_link_info *conf)
 		 * any auto mode, even "none".
 		 */
 		if (!conf->link_speed) {
-			req.auto_mode |= conf->auto_mode;
-			enables = HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_MODE;
-			req.auto_link_speed_mask = conf->auto_link_speed_mask;
-			enables |=
-			   HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED_MASK;
-			req.auto_link_speed = bp->link_info.auto_link_speed;
-			enables |=
+			req.auto_mode = conf->auto_mode;
+			enables |= HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_MODE;
+			if (conf->auto_mode ==
+			    HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_SPEED_MASK) {
+				req.auto_link_speed_mask =
+					conf->auto_link_speed_mask;
+				enables |= link_speed_mask;
+			}
+			if (bp->link_info.auto_link_speed) {
+				req.auto_link_speed =
+					bp->link_info.auto_link_speed;
+				enables |=
 				HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED;
+			}
 		}
 		req.auto_duplex = conf->duplex;
 		enables |= HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_DUPLEX;
-- 
2.7.4