From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from netronome.com (host-79-78-33-110.static.as9105.net [79.78.33.110]) by dpdk.org (Postfix) with ESMTP id 45ECF4F9B; Fri, 24 Aug 2018 16:26:27 +0200 (CEST) Received: from netronome.com (localhost [127.0.0.1]) by netronome.com (8.14.4/8.14.4/Debian-4.1ubuntu1) with ESMTP id w7OEPdNG000913; Fri, 24 Aug 2018 15:25:39 +0100 Received: (from alucero@localhost) by netronome.com (8.14.4/8.14.4/Submit) id w7OEPcwc000912; Fri, 24 Aug 2018 15:25:38 +0100 From: Alejandro Lucero To: dev@dpdk.org Cc: stable@dpdk.org, ferruh.yigit@intel.com Date: Fri, 24 Aug 2018 15:25:34 +0100 Message-Id: <1535120736-785-1-git-send-email-alejandro.lucero@netronome.com> X-Mailer: git-send-email 1.9.1 Subject: [dpdk-stable] [PATCH v3 0/2] support MAC changes when no live changes allowed X-BeenThere: stable@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: patches for DPDK stable branches List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 24 Aug 2018 14:26:27 -0000 This is a patched to fix a functionality coming with the first public release: changing/setting MAC address. The original patch assumes all NICs can safely change or set the MAC in any case. However, this is not always true. NFP depends on the firmware capabilities and this is not always supported. There are other NICs with this same limitation, although, as far as I know, not in DPDK. Linux kernel has a IFF_LIVE_ADDR_CHANGE flag and two NICs are checking this flag for allowing or not live MAC changes. The flag proposed in this patch is just the opposite: advertise if live change not supported and assuming it is supported other way. Although most NICs support rte_eth_dev_default_mac_addr_set and this function returns and error when live change is not supported, note that this function is invoked during port start but the value returned is not checked. It is likely this is good enough for most of the cases, but bonding is relying on this start then mac set/change, and a PMD ports is not properly configured for being used as an slave port in some bonding modes. v2: - add RTE_ETH_DEV_NOLIVE_MAC_ADDR comment in rte_eth_dev_default_mac_addr_set doc - add rte_eth_dev_start change in release API changes v3: - merge doc API changes with first patch - comment behaviour change in rte_eth_dev_start - remove comment on rte_eth_dev_default_mac_addr_set