patches for DPDK stable branches
 help / color / mirror / Atom feed
From: "Wei Hu (Xavier)" <xavier.huwei@huawei.com>
To: <luca.boccassi@gmail.com>
Cc: <xavier.huwei@huawei.com>, <stable@dpdk.org>
Subject: [dpdk-stable] [PATCH 19.11 3/5] net/hns3: remove IO rmb call in Rx operation
Date: Mon, 1 Jun 2020 16:48:54 +0800	[thread overview]
Message-ID: <1591001336-6162-4-git-send-email-xavier.huwei@huawei.com> (raw)
In-Reply-To: <1591001336-6162-1-git-send-email-xavier.huwei@huawei.com>

[ upstream commit 808bb183e493cde22285db0b8326efd9392bc216 ]

When receiving a packet, hns3 hardware network engine firstly writes the
packet content to the memory pointed by the 'addr' field of the Rx
Buffer Descriptor, secondly fills the result of parsing the packet
include the valid field into the Rx Buffer Descriptor in one write
operation, and thirdly writes the number of the Buffer Descriptor not
processed by the driver to the HNS3_RING_RX_FBDNUM_REG register.

This patch optimizes the Rx performance by removing one rte_io_rmb call
in the '.rx_pkt_burst' ops implementation function named hns3_recv_pkts.
The change as follows:
1. Driver no longer read HNS3_RING_RX_FBDNUM_REG register, so remove one
   rte_io_rmb call, and directly read the valid flag of Rx Buffer
   Descriptor to check whether the BD is ready.
2. Delete the non_vld_descs field from the statistic information of the
   hns3 driver because now it has become a common case that the valid
   flag of Rx Buffer Descriptor read by the driver is invalid.

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
---
 drivers/net/hns3/hns3_rxtx.c  | 12 +++---------
 drivers/net/hns3/hns3_rxtx.h  |  1 -
 drivers/net/hns3/hns3_stats.c |  3 ---
 3 files changed, 3 insertions(+), 13 deletions(-)

diff --git a/drivers/net/hns3/hns3_rxtx.c b/drivers/net/hns3/hns3_rxtx.c
index af7972f..23bb115 100644
--- a/drivers/net/hns3/hns3_rxtx.c
+++ b/drivers/net/hns3/hns3_rxtx.c
@@ -1225,7 +1225,6 @@ hns3_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t nb_desc,
 	rxq->io_base = (void *)((char *)hw->io_base + HNS3_TQP_REG_OFFSET +
 				idx * HNS3_TQP_REG_SIZE);
 	rxq->rx_buf_len = hw->rx_buf_len;
-	rxq->non_vld_descs = 0;
 	rxq->l2_errors = 0;
 	rxq->pkt_len_errors = 0;
 	rxq->l3_csum_erros = 0;
@@ -1472,7 +1471,6 @@ hns3_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
 	uint16_t pkt_len;
 	uint16_t nb_rx;
 	uint16_t rx_id;
-	int num;                        /* num of desc in ring */
 	int ret;
 
 	nb_rx = 0;
@@ -1486,15 +1484,11 @@ hns3_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
 	last_seg = rxq->pkt_last_seg;
 	sw_ring = rxq->sw_ring;
 
-	/* Get num of packets in descriptor ring */
-	num = hns3_read_dev(rxq, HNS3_RING_RX_FBDNUM_REG);
-	while (nb_rx_bd < num && nb_rx < nb_pkts) {
+	while (nb_rx < nb_pkts) {
 		rxdp = &rx_ring[rx_id];
 		bd_base_info = rte_le_to_cpu_32(rxdp->rx.bd_base_info);
-		if (unlikely(!hns3_get_bit(bd_base_info, HNS3_RXD_VLD_B))) {
-			rxq->non_vld_descs++;
+		if (unlikely(!hns3_get_bit(bd_base_info, HNS3_RXD_VLD_B)))
 			break;
-		}
 
 		nmb = rte_mbuf_raw_alloc(rxq->mb_pool);
 		if (unlikely(nmb == NULL)) {
@@ -1505,7 +1499,7 @@ hns3_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
 		nb_rx_bd++;
 		rxe = &sw_ring[rx_id];
 		rx_id++;
-		if (rx_id == rxq->nb_rx_desc)
+		if (unlikely(rx_id == rxq->nb_rx_desc))
 			rx_id = 0;
 
 		rte_prefetch0(sw_ring[rx_id].mbuf);
diff --git a/drivers/net/hns3/hns3_rxtx.h b/drivers/net/hns3/hns3_rxtx.h
index b751472..00b92cf 100644
--- a/drivers/net/hns3/hns3_rxtx.h
+++ b/drivers/net/hns3/hns3_rxtx.h
@@ -245,7 +245,6 @@ struct hns3_rx_queue {
 	bool rx_deferred_start; /* don't start this queue in dev start */
 	bool configured;        /* indicate if rx queue has been configured */
 
-	uint64_t non_vld_descs; /* num of non valid rx descriptors */
 	uint64_t l2_errors;
 	uint64_t pkt_len_errors;
 	uint64_t l3_csum_erros;
diff --git a/drivers/net/hns3/hns3_stats.c b/drivers/net/hns3/hns3_stats.c
index 6e13948..10cc757 100644
--- a/drivers/net/hns3/hns3_stats.c
+++ b/drivers/net/hns3/hns3_stats.c
@@ -219,8 +219,6 @@ static const struct hns3_xstats_name_offset hns3_reset_stats_strings[] = {
 
 /* The statistic of errors in Rx BD */
 static const struct hns3_xstats_name_offset hns3_rx_bd_error_strings[] = {
-	{"NONE_VALIDATED_DESCRIPTORS",
-		HNS3_RX_BD_ERROR_STATS_FIELD_OFFSET(non_vld_descs)},
 	{"RX_PKT_LEN_ERRORS",
 		HNS3_RX_BD_ERROR_STATS_FIELD_OFFSET(pkt_len_errors)},
 	{"L2_RX_ERRORS",
@@ -512,7 +510,6 @@ hns3_stats_reset(struct rte_eth_dev *eth_dev)
 		rxq = eth_dev->data->rx_queues[i];
 		if (rxq) {
 			rxq->pkt_len_errors = 0;
-			rxq->non_vld_descs = 0;
 			rxq->l2_errors = 0;
 			rxq->l3_csum_erros = 0;
 			rxq->l4_csum_erros = 0;
-- 
2.7.4


  parent reply	other threads:[~2020-06-01  8:50 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-01  8:48 [dpdk-stable] [PATCH 19.11 0/5] improving I/O backport for hns3 PMD driver Wei Hu (Xavier)
2020-06-01  8:48 ` [dpdk-stable] [PATCH 19.11 1/5] net/hns3: remove unnecessary assignment Wei Hu (Xavier)
2020-06-01  8:48 ` [dpdk-stable] [PATCH 19.11 2/5] net/hns3: reduce judgements of free Tx ring space Wei Hu (Xavier)
2020-06-01  8:48 ` Wei Hu (Xavier) [this message]
2020-06-01  8:48 ` [dpdk-stable] [PATCH 19.11 4/5] net/hns3: add free thresh in Rx operation Wei Hu (Xavier)
2020-06-01  8:48 ` [dpdk-stable] [PATCH 19.11 5/5] net/hns3: replace memory barrier with data dependency order Wei Hu (Xavier)
2020-06-01  9:30 ` [dpdk-stable] [PATCH 19.11 0/5] improving I/O backport for hns3 PMD driver Luca Boccassi
2020-06-02  1:10   ` Wei Hu (Xavier)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1591001336-6162-4-git-send-email-xavier.huwei@huawei.com \
    --to=xavier.huwei@huawei.com \
    --cc=luca.boccassi@gmail.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).