* [dpdk-stable] [PATCH 18.11] net/cxgbe: fix L2T leak in filter error and free path
@ 2020-09-04 12:34 Rahul Lakkireddy
2020-09-04 14:10 ` Kevin Traynor
0 siblings, 1 reply; 4+ messages in thread
From: Rahul Lakkireddy @ 2020-09-04 12:34 UTC (permalink / raw)
To: stable
[ upstream commit e0e1496be5fcabd31807ef9981c421963a9f8578 ]
Free up Layer 2 Table (L2T) entry properly during filter create
failure and filter delete.
Fixes: 1decc62b1cbe ("net/cxgbe: add flow operations to offload VLAN actions")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
---
drivers/net/cxgbe/cxgbe_filter.c | 29 ++++++++++++++++-------------
1 file changed, 16 insertions(+), 13 deletions(-)
diff --git a/drivers/net/cxgbe/cxgbe_filter.c b/drivers/net/cxgbe/cxgbe_filter.c
index 489c23249..0b6629895 100644
--- a/drivers/net/cxgbe/cxgbe_filter.c
+++ b/drivers/net/cxgbe/cxgbe_filter.c
@@ -276,6 +276,9 @@ static void clear_filter(struct filter_entry *f)
if (f->clipt)
cxgbe_clip_release(f->dev, f->clipt);
+ if (f->l2t)
+ cxgbe_l2t_release(f->l2t);
+
/* The zeroing of the filter rule below clears the filter valid,
* pending, locked flags etc. so it's all we need for
* this operation.
@@ -711,19 +714,6 @@ static int set_filter_wr(struct rte_eth_dev *dev, unsigned int fidx)
unsigned int port_id = ethdev2pinfo(dev)->port_id;
int ret;
- /*
- * If the new filter requires loopback Destination MAC and/or VLAN
- * rewriting then we need to allocate a Layer 2 Table (L2T) entry for
- * the filter.
- */
- if (f->fs.newvlan) {
- /* allocate L2T entry for new filter */
- f->l2t = cxgbe_l2t_alloc_switching(f->dev, f->fs.vlan,
- f->fs.eport, f->fs.dmac);
- if (!f->l2t)
- return -ENOMEM;
- }
-
ctrlq = &adapter->sge.ctrlq[port_id];
mbuf = rte_pktmbuf_alloc(ctrlq->mb_pool);
if (!mbuf) {
@@ -1015,6 +1005,19 @@ int cxgbe_set_filter(struct rte_eth_dev *dev, unsigned int filter_id,
}
}
+ /* If the new filter requires loopback Destination MAC and/or VLAN
+ * rewriting then we need to allocate a Layer 2 Table (L2T) entry for
+ * the filter.
+ */
+ if (f->fs.newvlan) {
+ f->l2t = cxgbe_l2t_alloc_switching(f->dev, f->fs.vlan,
+ f->fs.eport, f->fs.dmac);
+ if (!f->l2t) {
+ ret = -ENOMEM;
+ goto free_tid;
+ }
+ }
+
/*
* Attempt to set the filter. If we don't succeed, we clear
* it and return the failure.
--
2.24.0
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-stable] [PATCH 18.11] net/cxgbe: fix L2T leak in filter error and free path
2020-09-04 12:34 [dpdk-stable] [PATCH 18.11] net/cxgbe: fix L2T leak in filter error and free path Rahul Lakkireddy
@ 2020-09-04 14:10 ` Kevin Traynor
2020-09-04 14:33 ` Rahul Lakkireddy
0 siblings, 1 reply; 4+ messages in thread
From: Kevin Traynor @ 2020-09-04 14:10 UTC (permalink / raw)
To: Rahul Lakkireddy, stable
On 04/09/2020 13:34, Rahul Lakkireddy wrote:
> [ upstream commit e0e1496be5fcabd31807ef9981c421963a9f8578 ]
>
> Free up Layer 2 Table (L2T) entry properly during filter create
> failure and filter delete.
>
> Fixes: 1decc62b1cbe ("net/cxgbe: add flow operations to offload VLAN actions")
>
> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
> ---
Thanks Rahul. There was a bit of fuzz when applying because I had
rebased below locally.
net/cxgbe: fix double MPS alloc by flow validate and create
[ upstream commit be5f4d5ced10f9d7edc8ba4b3f1d98b9d476d367 ]
Both commits are in the queue, please take a look and let me know if any
issue.
https://github.com/kevintraynor/dpdk-stable-queue/commit/b82919008c7462a0f2e117e65210754ccb7470f1
https://github.com/kevintraynor/dpdk-stable-queue/commit/7d482e8b14c7436f73e0497b6f1a0f00e0dc6eba
Kevin.
> drivers/net/cxgbe/cxgbe_filter.c | 29 ++++++++++++++++-------------
> 1 file changed, 16 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/net/cxgbe/cxgbe_filter.c b/drivers/net/cxgbe/cxgbe_filter.c
> index 489c23249..0b6629895 100644
> --- a/drivers/net/cxgbe/cxgbe_filter.c
> +++ b/drivers/net/cxgbe/cxgbe_filter.c
> @@ -276,6 +276,9 @@ static void clear_filter(struct filter_entry *f)
> if (f->clipt)
> cxgbe_clip_release(f->dev, f->clipt);
>
> + if (f->l2t)
> + cxgbe_l2t_release(f->l2t);
> +
> /* The zeroing of the filter rule below clears the filter valid,
> * pending, locked flags etc. so it's all we need for
> * this operation.
> @@ -711,19 +714,6 @@ static int set_filter_wr(struct rte_eth_dev *dev, unsigned int fidx)
> unsigned int port_id = ethdev2pinfo(dev)->port_id;
> int ret;
>
> - /*
> - * If the new filter requires loopback Destination MAC and/or VLAN
> - * rewriting then we need to allocate a Layer 2 Table (L2T) entry for
> - * the filter.
> - */
> - if (f->fs.newvlan) {
> - /* allocate L2T entry for new filter */
> - f->l2t = cxgbe_l2t_alloc_switching(f->dev, f->fs.vlan,
> - f->fs.eport, f->fs.dmac);
> - if (!f->l2t)
> - return -ENOMEM;
> - }
> -
> ctrlq = &adapter->sge.ctrlq[port_id];
> mbuf = rte_pktmbuf_alloc(ctrlq->mb_pool);
> if (!mbuf) {
> @@ -1015,6 +1005,19 @@ int cxgbe_set_filter(struct rte_eth_dev *dev, unsigned int filter_id,
> }
> }
>
> + /* If the new filter requires loopback Destination MAC and/or VLAN
> + * rewriting then we need to allocate a Layer 2 Table (L2T) entry for
> + * the filter.
> + */
> + if (f->fs.newvlan) {
> + f->l2t = cxgbe_l2t_alloc_switching(f->dev, f->fs.vlan,
> + f->fs.eport, f->fs.dmac);
> + if (!f->l2t) {
> + ret = -ENOMEM;
> + goto free_tid;
> + }
> + }
> +
> /*
> * Attempt to set the filter. If we don't succeed, we clear
> * it and return the failure.
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-stable] [PATCH 18.11] net/cxgbe: fix L2T leak in filter error and free path
2020-09-04 14:10 ` Kevin Traynor
@ 2020-09-04 14:33 ` Rahul Lakkireddy
2020-09-04 14:59 ` Kevin Traynor
0 siblings, 1 reply; 4+ messages in thread
From: Rahul Lakkireddy @ 2020-09-04 14:33 UTC (permalink / raw)
To: Kevin Traynor; +Cc: stable
On Friday, September 09/04/20, 2020 at 15:10:43 +0100, Kevin Traynor wrote:
> On 04/09/2020 13:34, Rahul Lakkireddy wrote:
> > [ upstream commit e0e1496be5fcabd31807ef9981c421963a9f8578 ]
> >
> > Free up Layer 2 Table (L2T) entry properly during filter create
> > failure and filter delete.
> >
> > Fixes: 1decc62b1cbe ("net/cxgbe: add flow operations to offload VLAN actions")
> >
> > Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
> > ---
>
> Thanks Rahul. There was a bit of fuzz when applying because I had
> rebased below locally.
>
> net/cxgbe: fix double MPS alloc by flow validate and create
>
> [ upstream commit be5f4d5ced10f9d7edc8ba4b3f1d98b9d476d367 ]
>
> Both commits are in the queue, please take a look and let me know if any
> issue.
>
> https://github.com/kevintraynor/dpdk-stable-queue/commit/b82919008c7462a0f2e117e65210754ccb7470f1
>
> https://github.com/kevintraynor/dpdk-stable-queue/commit/7d482e8b14c7436f73e0497b6f1a0f00e0dc6eba
>
> Kevin.
>
Hi Kevin,
Could you move the cxgbe_l2t_release() above the cxgbe_mpstcam_remove()?
Like below:
if (f->l2t)
cxgbe_l2t_release(f->l2t);
if (f->fs.mask.macidx)
cxgbe_mpstcam_remove(pi, f->fs.val.macidx);
Let me know if you want me to resend the patch on top of
dpdk-stable-queue tree with the fuzz fixed.
Thanks,
Rahul
> > drivers/net/cxgbe/cxgbe_filter.c | 29 ++++++++++++++++-------------
> > 1 file changed, 16 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/net/cxgbe/cxgbe_filter.c b/drivers/net/cxgbe/cxgbe_filter.c
> > index 489c23249..0b6629895 100644
> > --- a/drivers/net/cxgbe/cxgbe_filter.c
> > +++ b/drivers/net/cxgbe/cxgbe_filter.c
> > @@ -276,6 +276,9 @@ static void clear_filter(struct filter_entry *f)
> > if (f->clipt)
> > cxgbe_clip_release(f->dev, f->clipt);
> >
> > + if (f->l2t)
> > + cxgbe_l2t_release(f->l2t);
> > +
> > /* The zeroing of the filter rule below clears the filter valid,
> > * pending, locked flags etc. so it's all we need for
> > * this operation.
> > @@ -711,19 +714,6 @@ static int set_filter_wr(struct rte_eth_dev *dev, unsigned int fidx)
> > unsigned int port_id = ethdev2pinfo(dev)->port_id;
> > int ret;
> >
> > - /*
> > - * If the new filter requires loopback Destination MAC and/or VLAN
> > - * rewriting then we need to allocate a Layer 2 Table (L2T) entry for
> > - * the filter.
> > - */
> > - if (f->fs.newvlan) {
> > - /* allocate L2T entry for new filter */
> > - f->l2t = cxgbe_l2t_alloc_switching(f->dev, f->fs.vlan,
> > - f->fs.eport, f->fs.dmac);
> > - if (!f->l2t)
> > - return -ENOMEM;
> > - }
> > -
> > ctrlq = &adapter->sge.ctrlq[port_id];
> > mbuf = rte_pktmbuf_alloc(ctrlq->mb_pool);
> > if (!mbuf) {
> > @@ -1015,6 +1005,19 @@ int cxgbe_set_filter(struct rte_eth_dev *dev, unsigned int filter_id,
> > }
> > }
> >
> > + /* If the new filter requires loopback Destination MAC and/or VLAN
> > + * rewriting then we need to allocate a Layer 2 Table (L2T) entry for
> > + * the filter.
> > + */
> > + if (f->fs.newvlan) {
> > + f->l2t = cxgbe_l2t_alloc_switching(f->dev, f->fs.vlan,
> > + f->fs.eport, f->fs.dmac);
> > + if (!f->l2t) {
> > + ret = -ENOMEM;
> > + goto free_tid;
> > + }
> > + }
> > +
> > /*
> > * Attempt to set the filter. If we don't succeed, we clear
> > * it and return the failure.
> >
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-stable] [PATCH 18.11] net/cxgbe: fix L2T leak in filter error and free path
2020-09-04 14:33 ` Rahul Lakkireddy
@ 2020-09-04 14:59 ` Kevin Traynor
0 siblings, 0 replies; 4+ messages in thread
From: Kevin Traynor @ 2020-09-04 14:59 UTC (permalink / raw)
To: Rahul Lakkireddy; +Cc: stable
On 04/09/2020 15:33, Rahul Lakkireddy wrote:
> On Friday, September 09/04/20, 2020 at 15:10:43 +0100, Kevin Traynor wrote:
>> On 04/09/2020 13:34, Rahul Lakkireddy wrote:
>>> [ upstream commit e0e1496be5fcabd31807ef9981c421963a9f8578 ]
>>>
>>> Free up Layer 2 Table (L2T) entry properly during filter create
>>> failure and filter delete.
>>>
>>> Fixes: 1decc62b1cbe ("net/cxgbe: add flow operations to offload VLAN actions")
>>>
>>> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
>>> ---
>>
>> Thanks Rahul. There was a bit of fuzz when applying because I had
>> rebased below locally.
>>
>> net/cxgbe: fix double MPS alloc by flow validate and create
>>
>> [ upstream commit be5f4d5ced10f9d7edc8ba4b3f1d98b9d476d367 ]
>>
>> Both commits are in the queue, please take a look and let me know if any
>> issue.
>>
>> https://github.com/kevintraynor/dpdk-stable-queue/commit/b82919008c7462a0f2e117e65210754ccb7470f1
>>
>> https://github.com/kevintraynor/dpdk-stable-queue/commit/7d482e8b14c7436f73e0497b6f1a0f00e0dc6eba
>>
>> Kevin.
>>
>
> Hi Kevin,
>
> Could you move the cxgbe_l2t_release() above the cxgbe_mpstcam_remove()?
> Like below:
>
Sure
> if (f->l2t)
> cxgbe_l2t_release(f->l2t);
>
> if (f->fs.mask.macidx)
> cxgbe_mpstcam_remove(pi, f->fs.val.macidx);
>
> Let me know if you want me to resend the patch on top of
> dpdk-stable-queue tree with the fuzz fixed.
>
No need. I've done it here:
https://github.com/kevintraynor/dpdk-stable-queue/commit/02647630a2f0be86f3daea2cc753c90357d46f85
> Thanks,
> Rahul
>
>>> drivers/net/cxgbe/cxgbe_filter.c | 29 ++++++++++++++++-------------
>>> 1 file changed, 16 insertions(+), 13 deletions(-)
>>>
>>> diff --git a/drivers/net/cxgbe/cxgbe_filter.c b/drivers/net/cxgbe/cxgbe_filter.c
>>> index 489c23249..0b6629895 100644
>>> --- a/drivers/net/cxgbe/cxgbe_filter.c
>>> +++ b/drivers/net/cxgbe/cxgbe_filter.c
>>> @@ -276,6 +276,9 @@ static void clear_filter(struct filter_entry *f)
>>> if (f->clipt)
>>> cxgbe_clip_release(f->dev, f->clipt);
>>>
>>> + if (f->l2t)
>>> + cxgbe_l2t_release(f->l2t);
>>> +
>>> /* The zeroing of the filter rule below clears the filter valid,
>>> * pending, locked flags etc. so it's all we need for
>>> * this operation.
>>> @@ -711,19 +714,6 @@ static int set_filter_wr(struct rte_eth_dev *dev, unsigned int fidx)
>>> unsigned int port_id = ethdev2pinfo(dev)->port_id;
>>> int ret;
>>>
>>> - /*
>>> - * If the new filter requires loopback Destination MAC and/or VLAN
>>> - * rewriting then we need to allocate a Layer 2 Table (L2T) entry for
>>> - * the filter.
>>> - */
>>> - if (f->fs.newvlan) {
>>> - /* allocate L2T entry for new filter */
>>> - f->l2t = cxgbe_l2t_alloc_switching(f->dev, f->fs.vlan,
>>> - f->fs.eport, f->fs.dmac);
>>> - if (!f->l2t)
>>> - return -ENOMEM;
>>> - }
>>> -
>>> ctrlq = &adapter->sge.ctrlq[port_id];
>>> mbuf = rte_pktmbuf_alloc(ctrlq->mb_pool);
>>> if (!mbuf) {
>>> @@ -1015,6 +1005,19 @@ int cxgbe_set_filter(struct rte_eth_dev *dev, unsigned int filter_id,
>>> }
>>> }
>>>
>>> + /* If the new filter requires loopback Destination MAC and/or VLAN
>>> + * rewriting then we need to allocate a Layer 2 Table (L2T) entry for
>>> + * the filter.
>>> + */
>>> + if (f->fs.newvlan) {
>>> + f->l2t = cxgbe_l2t_alloc_switching(f->dev, f->fs.vlan,
>>> + f->fs.eport, f->fs.dmac);
>>> + if (!f->l2t) {
>>> + ret = -ENOMEM;
>>> + goto free_tid;
>>> + }
>>> + }
>>> +
>>> /*
>>> * Attempt to set the filter. If we don't succeed, we clear
>>> * it and return the failure.
>>>
>>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-09-04 14:59 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-04 12:34 [dpdk-stable] [PATCH 18.11] net/cxgbe: fix L2T leak in filter error and free path Rahul Lakkireddy
2020-09-04 14:10 ` Kevin Traynor
2020-09-04 14:33 ` Rahul Lakkireddy
2020-09-04 14:59 ` Kevin Traynor
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).