* [dpdk-stable] [PATCH] examples/ipv4_multicast: enable multicast promiscuous for all port @ 2018-10-17 7:41 Wei Zhao 2018-10-17 8:09 ` Zhao1, Wei 0 siblings, 1 reply; 6+ messages in thread From: Wei Zhao @ 2018-10-17 7:41 UTC (permalink / raw) To: dev; +Cc: stable, qi.z.zhang, ferruh.yigit, Wei Zhao This example has not been enable for receiving multicast packet, so it will drop multicast packet. Users must send packet with ether MAC destination address the same as pf port MAC address, in order to forward packet successfully, but this is an example for forwarding ipv4 multicastpacket. So calling function rte_eth_promiscuous_enable() or rte_eth_allmulticast_enable() can enable promiscuous mode of all multicast packet. And aslo, DPDK has rte API function of rte_eth_dev_set_mc_addr_list() for setting specific multicast filter table for specific multicast IP address, but this example do not support this configuration, so it need to be enable multicast promiscuous mode instead. Signed-off-by: Wei Zhao <wei.zhao1@intel.com> --- examples/ipv4_multicast/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/examples/ipv4_multicast/main.c b/examples/ipv4_multicast/main.c index 6530d48..4073a49 100644 --- a/examples/ipv4_multicast/main.c +++ b/examples/ipv4_multicast/main.c @@ -773,7 +773,7 @@ main(int argc, char **argv) qconf->tx_queue_id[portid] = queueid; queueid++; } - + rte_eth_allmulticast_enable(portid); /* Start device */ ret = rte_eth_dev_start(portid); if (ret < 0) -- 2.7.5 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-stable] [PATCH] examples/ipv4_multicast: enable multicast promiscuous for all port 2018-10-17 7:41 [dpdk-stable] [PATCH] examples/ipv4_multicast: enable multicast promiscuous for all port Wei Zhao @ 2018-10-17 8:09 ` Zhao1, Wei 2018-10-24 8:11 ` Zhao1, Wei 0 siblings, 1 reply; 6+ messages in thread From: Zhao1, Wei @ 2018-10-17 8:09 UTC (permalink / raw) To: dev; +Cc: stable, Zhang, Qi Z, Yigit, Ferruh By the way, I think the maintainer's opinion is important for this change, but there is no maintainer name for this example in file MAINTAINERS! > -----Original Message----- > From: Zhao1, Wei > Sent: Wednesday, October 17, 2018 3:41 PM > To: dev@dpdk.org > Cc: stable@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Yigit, Ferruh > <ferruh.yigit@intel.com>; Zhao1, Wei <wei.zhao1@intel.com> > Subject: [PATCH] examples/ipv4_multicast: enable multicast promiscuous for > all port > > This example has not been enable for receiving multicast packet, so it will > drop multicast packet. Users must send packet with ether MAC destination > address the same as pf port MAC address, in order to forward packet > successfully, but this is an example for forwarding ipv4 multicastpacket. So > calling function > rte_eth_promiscuous_enable() or rte_eth_allmulticast_enable() can enable > promiscuous mode of all multicast packet. And aslo, DPDK has rte API > function of rte_eth_dev_set_mc_addr_list() for setting specific multicast > filter table for specific multicast IP address, but this example do not support > this configuration, so it need to be enable multicast promiscuous mode > instead. > > Signed-off-by: Wei Zhao <wei.zhao1@intel.com> > --- > examples/ipv4_multicast/main.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/examples/ipv4_multicast/main.c > b/examples/ipv4_multicast/main.c index 6530d48..4073a49 100644 > --- a/examples/ipv4_multicast/main.c > +++ b/examples/ipv4_multicast/main.c > @@ -773,7 +773,7 @@ main(int argc, char **argv) > qconf->tx_queue_id[portid] = queueid; > queueid++; > } > - > + rte_eth_allmulticast_enable(portid); > /* Start device */ > ret = rte_eth_dev_start(portid); > if (ret < 0) > -- > 2.7.5 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-stable] [PATCH] examples/ipv4_multicast: enable multicast promiscuous for all port 2018-10-17 8:09 ` Zhao1, Wei @ 2018-10-24 8:11 ` Zhao1, Wei 2018-10-24 8:50 ` Wang, Dong1 0 siblings, 1 reply; 6+ messages in thread From: Zhao1, Wei @ 2018-10-24 8:11 UTC (permalink / raw) To: Zhao1, Wei, dev Cc: stable, Zhang, Qi Z, Yigit, Ferruh, Wang, Dong1, Thomas Monjalon Add Wang Dong in the mailing list, he has test this patch. > -----Original Message----- > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Zhao1, Wei > Sent: Wednesday, October 17, 2018 4:09 PM > To: dev@dpdk.org > Cc: stable@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Yigit, Ferruh > <ferruh.yigit@intel.com> > Subject: Re: [dpdk-dev] [PATCH] examples/ipv4_multicast: enable multicast > promiscuous for all port > > By the way, I think the maintainer's opinion is important for this change, but > there is no maintainer name for this example in file MAINTAINERS! > > > -----Original Message----- > > From: Zhao1, Wei > > Sent: Wednesday, October 17, 2018 3:41 PM > > To: dev@dpdk.org > > Cc: stable@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Yigit, Ferruh > > <ferruh.yigit@intel.com>; Zhao1, Wei <wei.zhao1@intel.com> > > Subject: [PATCH] examples/ipv4_multicast: enable multicast promiscuous > > for all port > > > > This example has not been enable for receiving multicast packet, so it > > will drop multicast packet. Users must send packet with ether MAC > > destination address the same as pf port MAC address, in order to > > forward packet successfully, but this is an example for forwarding > > ipv4 multicastpacket. So calling function > > rte_eth_promiscuous_enable() or rte_eth_allmulticast_enable() can > > enable promiscuous mode of all multicast packet. And aslo, DPDK has > > rte API function of rte_eth_dev_set_mc_addr_list() for setting > > specific multicast filter table for specific multicast IP address, but > > this example do not support this configuration, so it need to be > > enable multicast promiscuous mode instead. > > > > Signed-off-by: Wei Zhao <wei.zhao1@intel.com> > > --- > > examples/ipv4_multicast/main.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/examples/ipv4_multicast/main.c > > b/examples/ipv4_multicast/main.c index 6530d48..4073a49 100644 > > --- a/examples/ipv4_multicast/main.c > > +++ b/examples/ipv4_multicast/main.c > > @@ -773,7 +773,7 @@ main(int argc, char **argv) > > qconf->tx_queue_id[portid] = queueid; > > queueid++; > > } > > - > > + rte_eth_allmulticast_enable(portid); > > /* Start device */ > > ret = rte_eth_dev_start(portid); > > if (ret < 0) > > -- > > 2.7.5 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-stable] [PATCH] examples/ipv4_multicast: enable multicast promiscuous for all port 2018-10-24 8:11 ` Zhao1, Wei @ 2018-10-24 8:50 ` Wang, Dong1 2018-10-25 2:07 ` Zhao1, Wei 2018-10-29 2:01 ` Thomas Monjalon 0 siblings, 2 replies; 6+ messages in thread From: Wang, Dong1 @ 2018-10-24 8:50 UTC (permalink / raw) To: Zhao1, Wei, dev; +Cc: stable, Zhang, Qi Z, Yigit, Ferruh, Thomas Monjalon Tested it with 82599 PF. Acked-by: Wang Dong <dong1.wang@intel.com> -----Original Message----- From: Zhao1, Wei Sent: Wednesday, October 24, 2018 16:11 To: Zhao1, Wei <wei.zhao1@intel.com>; dev@dpdk.org Cc: stable@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Yigit, Ferruh <ferruh.yigit@intel.com>; Wang, Dong1 <dong1.wang@intel.com>; Thomas Monjalon <thomas@monjalon.net> Subject: RE: [PATCH] examples/ipv4_multicast: enable multicast promiscuous for all port Add Wang Dong in the mailing list, he has test this patch. > -----Original Message----- > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Zhao1, Wei > Sent: Wednesday, October 17, 2018 4:09 PM > To: dev@dpdk.org > Cc: stable@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Yigit, Ferruh > <ferruh.yigit@intel.com> > Subject: Re: [dpdk-dev] [PATCH] examples/ipv4_multicast: enable > multicast promiscuous for all port > > By the way, I think the maintainer's opinion is important for this > change, but there is no maintainer name for this example in file MAINTAINERS! > > > -----Original Message----- > > From: Zhao1, Wei > > Sent: Wednesday, October 17, 2018 3:41 PM > > To: dev@dpdk.org > > Cc: stable@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Yigit, > > Ferruh <ferruh.yigit@intel.com>; Zhao1, Wei <wei.zhao1@intel.com> > > Subject: [PATCH] examples/ipv4_multicast: enable multicast > > promiscuous for all port > > > > This example has not been enable for receiving multicast packet, so > > it will drop multicast packet. Users must send packet with ether MAC > > destination address the same as pf port MAC address, in order to > > forward packet successfully, but this is an example for forwarding > > ipv4 multicastpacket. So calling function > > rte_eth_promiscuous_enable() or rte_eth_allmulticast_enable() can > > enable promiscuous mode of all multicast packet. And aslo, DPDK has > > rte API function of rte_eth_dev_set_mc_addr_list() for setting > > specific multicast filter table for specific multicast IP address, > > but this example do not support this configuration, so it need to be > > enable multicast promiscuous mode instead. > > > > Signed-off-by: Wei Zhao <wei.zhao1@intel.com> > > --- > > examples/ipv4_multicast/main.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/examples/ipv4_multicast/main.c > > b/examples/ipv4_multicast/main.c index 6530d48..4073a49 100644 > > --- a/examples/ipv4_multicast/main.c > > +++ b/examples/ipv4_multicast/main.c > > @@ -773,7 +773,7 @@ main(int argc, char **argv) > > qconf->tx_queue_id[portid] = queueid; > > queueid++; > > } > > - > > + rte_eth_allmulticast_enable(portid); > > /* Start device */ > > ret = rte_eth_dev_start(portid); > > if (ret < 0) > > -- > > 2.7.5 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-stable] [PATCH] examples/ipv4_multicast: enable multicast promiscuous for all port 2018-10-24 8:50 ` Wang, Dong1 @ 2018-10-25 2:07 ` Zhao1, Wei 2018-10-29 2:01 ` Thomas Monjalon 1 sibling, 0 replies; 6+ messages in thread From: Zhao1, Wei @ 2018-10-25 2:07 UTC (permalink / raw) To: Wang, Dong1, dev; +Cc: stable, Zhang, Qi Z, Yigit, Ferruh, Thomas Monjalon > -----Original Message----- > From: Wang, Dong1 > Sent: Wednesday, October 24, 2018 4:51 PM > To: Zhao1, Wei <wei.zhao1@intel.com>; dev@dpdk.org > Cc: stable@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Yigit, Ferruh > <ferruh.yigit@intel.com>; Thomas Monjalon <thomas@monjalon.net> > Subject: RE: [PATCH] examples/ipv4_multicast: enable multicast promiscuous > for all port > > Tested it with 82599 PF. > > Acked-by: Wang Dong <dong1.wang@intel.com> > Thank you! > -----Original Message----- > From: Zhao1, Wei > Sent: Wednesday, October 24, 2018 16:11 > To: Zhao1, Wei <wei.zhao1@intel.com>; dev@dpdk.org > Cc: stable@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Yigit, Ferruh > <ferruh.yigit@intel.com>; Wang, Dong1 <dong1.wang@intel.com>; Thomas > Monjalon <thomas@monjalon.net> > Subject: RE: [PATCH] examples/ipv4_multicast: enable multicast promiscuous > for all port > > Add Wang Dong in the mailing list, he has test this patch. > > > > -----Original Message----- > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Zhao1, Wei > > Sent: Wednesday, October 17, 2018 4:09 PM > > To: dev@dpdk.org > > Cc: stable@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Yigit, Ferruh > > <ferruh.yigit@intel.com> > > Subject: Re: [dpdk-dev] [PATCH] examples/ipv4_multicast: enable > > multicast promiscuous for all port > > > > By the way, I think the maintainer's opinion is important for this > > change, but there is no maintainer name for this example in file > MAINTAINERS! > > > > > -----Original Message----- > > > From: Zhao1, Wei > > > Sent: Wednesday, October 17, 2018 3:41 PM > > > To: dev@dpdk.org > > > Cc: stable@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Yigit, > > > Ferruh <ferruh.yigit@intel.com>; Zhao1, Wei <wei.zhao1@intel.com> > > > Subject: [PATCH] examples/ipv4_multicast: enable multicast > > > promiscuous for all port > > > > > > This example has not been enable for receiving multicast packet, so > > > it will drop multicast packet. Users must send packet with ether MAC > > > destination address the same as pf port MAC address, in order to > > > forward packet successfully, but this is an example for forwarding > > > ipv4 multicastpacket. So calling function > > > rte_eth_promiscuous_enable() or rte_eth_allmulticast_enable() can > > > enable promiscuous mode of all multicast packet. And aslo, DPDK has > > > rte API function of rte_eth_dev_set_mc_addr_list() for setting > > > specific multicast filter table for specific multicast IP address, > > > but this example do not support this configuration, so it need to be > > > enable multicast promiscuous mode instead. > > > > > > Signed-off-by: Wei Zhao <wei.zhao1@intel.com> > > > --- > > > examples/ipv4_multicast/main.c | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > diff --git a/examples/ipv4_multicast/main.c > > > b/examples/ipv4_multicast/main.c index 6530d48..4073a49 100644 > > > --- a/examples/ipv4_multicast/main.c > > > +++ b/examples/ipv4_multicast/main.c > > > @@ -773,7 +773,7 @@ main(int argc, char **argv) > > > qconf->tx_queue_id[portid] = queueid; > > > queueid++; > > > } > > > - > > > + rte_eth_allmulticast_enable(portid); > > > /* Start device */ > > > ret = rte_eth_dev_start(portid); > > > if (ret < 0) > > > -- > > > 2.7.5 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-stable] [PATCH] examples/ipv4_multicast: enable multicast promiscuous for all port 2018-10-24 8:50 ` Wang, Dong1 2018-10-25 2:07 ` Zhao1, Wei @ 2018-10-29 2:01 ` Thomas Monjalon 1 sibling, 0 replies; 6+ messages in thread From: Thomas Monjalon @ 2018-10-29 2:01 UTC (permalink / raw) To: Zhao1, Wei; +Cc: stable, Wang, Dong1, dev, Zhang, Qi Z, Yigit, Ferruh 24/10/2018 10:50, Wang, Dong1: > Tested it with 82599 PF. > > Acked-by: Wang Dong <dong1.wang@intel.com> The correct tag is probably Tested-by > From: Zhao1, Wei > > Add Wang Dong in the mailing list, he has test this patch. > > > > This example has not been enable for receiving multicast packet, so > > > it will drop multicast packet. Users must send packet with ether MAC > > > destination address the same as pf port MAC address, in order to > > > forward packet successfully, but this is an example for forwarding > > > ipv4 multicastpacket. So calling function > > > rte_eth_promiscuous_enable() or rte_eth_allmulticast_enable() can > > > enable promiscuous mode of all multicast packet. And aslo, DPDK has > > > rte API function of rte_eth_dev_set_mc_addr_list() for setting > > > specific multicast filter table for specific multicast IP address, > > > but this example do not support this configuration, so it need to be > > > enable multicast promiscuous mode instead. > > > > > > Signed-off-by: Wei Zhao <wei.zhao1@intel.com> Applied, thanks ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-10-29 2:01 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-10-17 7:41 [dpdk-stable] [PATCH] examples/ipv4_multicast: enable multicast promiscuous for all port Wei Zhao 2018-10-17 8:09 ` Zhao1, Wei 2018-10-24 8:11 ` Zhao1, Wei 2018-10-24 8:50 ` Wang, Dong1 2018-10-25 2:07 ` Zhao1, Wei 2018-10-29 2:01 ` Thomas Monjalon
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).