patches for DPDK stable branches
 help / color / mirror / Atom feed
From: "Nélio Laranjeiro" <nelio.laranjeiro@6wind.com>
To: Shahaf Shuler <shahafs@mellanox.com>
Cc: dev@dpdk.org, stable@dpdk.org
Subject: Re: [dpdk-stable] [PATCH v3] net/mlx5: fix link status is always inconsist
Date: Tue, 31 Jan 2017 16:40:00 +0100	[thread overview]
Message-ID: <20170131154000.GB16389@autoinstall.dev.6wind.com> (raw)
In-Reply-To: <1485868418-44506-1-git-send-email-shahafs@mellanox.com>

On Tue, Jan 31, 2017 at 03:13:38PM +0200, Shahaf Shuler wrote:
> Query the link status can end up in an inconsist state where the port is
> down but it is reporting speed. For that another query is scheduled for a
> later time.
> A race condition is possible between the scheduled call and other link
> status interrupt handlers. When the scheduled query by-pass those handlers,
> the link status will be stuck in an in-consist state.
> This patch addresses the race condition by not blocking link status
> queries in case delayed query is on the flight.
> 
> Fixes: 198a3c339a8f ("mlx5: handle link status interrupts")
> CC: stable@dpdk.org
> 
> Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
> ---
> on v3:
> * allow only single alarm on the flight.
> 
> on v2:
> * change the commit log to better explain the race
> * instead of blocking other interrupt handlers allow everyone to query the link status
> ---
>  drivers/net/mlx5/mlx5_ethdev.c | 26 +++++++++++---------------
>  1 file changed, 11 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
> index e77238f..fcbe273 100644
> --- a/drivers/net/mlx5/mlx5_ethdev.c
> +++ b/drivers/net/mlx5/mlx5_ethdev.c
> @@ -1128,7 +1128,7 @@ struct priv *
>  priv_dev_link_status_handler(struct priv *priv, struct rte_eth_dev *dev)
>  {
>  	struct ibv_async_event event;
> -	int port_change = 0;
> +	struct rte_eth_link *link = &dev->data->dev_link;
>  	int ret = 0;
>  
>  	/* Read all message and acknowledge them. */
> @@ -1136,29 +1136,24 @@ struct priv *
>  		if (ibv_get_async_event(priv->ctx, &event))
>  			break;
>  
> -		if (event.event_type == IBV_EVENT_PORT_ACTIVE ||
> -		    event.event_type == IBV_EVENT_PORT_ERR)
> -			port_change = 1;
> -		else
> +		if (event.event_type != IBV_EVENT_PORT_ACTIVE &&
> +		    event.event_type != IBV_EVENT_PORT_ERR)
>  			DEBUG("event type %d on port %d not handled",
>  			      event.event_type, event.element.port_num);
>  		ibv_ack_async_event(&event);
>  	}
> -
> -	if (port_change ^ priv->pending_alarm) {
> -		struct rte_eth_link *link = &dev->data->dev_link;
> -
> -		priv->pending_alarm = 0;
> -		mlx5_link_update(dev, 0);
> -		if (((link->link_speed == 0) && link->link_status) ||
> -		    ((link->link_speed != 0) && !link->link_status)) {
> +	mlx5_link_update(dev, 0);
> +	if (((link->link_speed == 0) && link->link_status) ||
> +	    ((link->link_speed != 0) && !link->link_status)) {
> +		if (!priv->pending_alarm) {
>  			/* Inconsistent status, check again later. */
>  			priv->pending_alarm = 1;
>  			rte_eal_alarm_set(MLX5_ALARM_TIMEOUT_US,
>  					  mlx5_dev_link_status_handler,
>  					  dev);
> -		} else
> -			ret = 1;
> +		}
> +	} else {
> +		ret = 1;
>  	}
>  	return ret;
>  }
> @@ -1178,6 +1173,7 @@ struct priv *
>  
>  	priv_lock(priv);
>  	assert(priv->pending_alarm == 1);
> +	priv->pending_alarm = 0;
>  	ret = priv_dev_link_status_handler(priv, dev);
>  	priv_unlock(priv);
>  	if (ret)
> -- 
> 1.8.3.1

Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>

-- 
Nélio Laranjeiro
6WIND

  reply	other threads:[~2017-01-31 15:40 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <485348339-43905-1-git-send-email-shahafs@mellanox.com>
2017-01-29  8:22 ` [dpdk-stable] [PATCH v2] " Shahaf Shuler
2017-01-31 13:13   ` [dpdk-stable] [PATCH v3] " Shahaf Shuler
2017-01-31 15:40     ` Nélio Laranjeiro [this message]
2017-02-01 10:57       ` [dpdk-stable] [dpdk-dev] " Ferruh Yigit
2017-01-29  8:28 ` [dpdk-stable] [PATCH v2] " Shahaf Shuler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170131154000.GB16389@autoinstall.dev.6wind.com \
    --to=nelio.laranjeiro@6wind.com \
    --cc=dev@dpdk.org \
    --cc=shahafs@mellanox.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).