From: Pablo de Lara <pablo.de.lara.guarch@intel.com>
To: yliu@fridaylinux.org
Cc: stable@dpdk.org, Pablo de Lara <pablo.de.lara.guarch@intel.com>
Subject: [dpdk-stable] [PATCH 4/5] doc: remove incorrect limitation on QAT PMD
Date: Wed, 16 Aug 2017 01:16:15 +0100 [thread overview]
Message-ID: <20170816001616.8036-5-pablo.de.lara.guarch@intel.com> (raw)
In-Reply-To: <20170816001616.8036-1-pablo.de.lara.guarch@intel.com>
[ backported from upstream commit de938b79b2fce7e15389aad1543e778a8721e3a5 ]
QAT supports authentication only operations,
for any authentication algorithm (such as SHA1-HMAC),
as long as it is supported by QAT, so it means
that it is not necessary to create a chained operation
in order to use these algorithms.
Fixes: 1703e94ac5ce ("qat: add driver for QuickAssist devices")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
---
app/test/test_cryptodev.c | 17 ++++++++++++++
app/test/test_cryptodev_hash_test_vectors.h | 36 +++++++++++++++++++----------
doc/guides/cryptodevs/qat.rst | 1 -
3 files changed, 41 insertions(+), 13 deletions(-)
diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index 2754653..b544ab9 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -1545,6 +1545,22 @@ test_authonly_openssl_all(void)
return TEST_SUCCESS;
}
+static int
+test_authonly_qat_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool, ts_params->valid_devs[0],
+ RTE_CRYPTODEV_QAT_SYM_PMD,
+ BLKCIPHER_AUTHONLY_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
/* ***** SNOW 3G Tests ***** */
static int
create_wireless_algo_hash_session(uint8_t dev_id,
@@ -6034,6 +6050,7 @@ static struct unit_test_suite cryptodev_qat_testsuite = {
TEST_CASE_ST(ut_setup, ut_teardown, test_3DES_chain_qat_all),
TEST_CASE_ST(ut_setup, ut_teardown,
test_3DES_cipheronly_qat_all),
+ TEST_CASE_ST(ut_setup, ut_teardown, test_authonly_qat_all),
TEST_CASE_ST(ut_setup, ut_teardown, test_stats),
/** AES GCM Authenticated Encryption */
diff --git a/app/test/test_cryptodev_hash_test_vectors.h b/app/test/test_cryptodev_hash_test_vectors.h
index 9f095cf..1daf681 100644
--- a/app/test/test_cryptodev_hash_test_vectors.h
+++ b/app/test/test_cryptodev_hash_test_vectors.h
@@ -358,13 +358,15 @@ static const struct blockcipher_test_case hash_test_cases[] = {
.test_descr = "HMAC-MD5 Digest",
.test_data = &hmac_md5_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "HMAC-MD5 Digest Verify",
.test_data = &hmac_md5_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "SHA1 Digest",
@@ -382,13 +384,15 @@ static const struct blockcipher_test_case hash_test_cases[] = {
.test_descr = "HMAC-SHA1 Digest",
.test_data = &hmac_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "HMAC-SHA1 Digest Verify",
.test_data = &hmac_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "SHA224 Digest",
@@ -406,13 +410,15 @@ static const struct blockcipher_test_case hash_test_cases[] = {
.test_descr = "HMAC-SHA224 Digest",
.test_data = &hmac_sha224_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "HMAC-SHA224 Digest Verify",
.test_data = &hmac_sha224_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "SHA256 Digest",
@@ -430,13 +436,15 @@ static const struct blockcipher_test_case hash_test_cases[] = {
.test_descr = "HMAC-SHA256 Digest",
.test_data = &hmac_sha256_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "HMAC-SHA256 Digest Verify",
.test_data = &hmac_sha256_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "SHA384 Digest",
@@ -454,13 +462,15 @@ static const struct blockcipher_test_case hash_test_cases[] = {
.test_descr = "HMAC-SHA384 Digest",
.test_data = &hmac_sha384_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "HMAC-SHA384 Digest Verify",
.test_data = &hmac_sha384_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "SHA512 Digest",
@@ -478,13 +488,15 @@ static const struct blockcipher_test_case hash_test_cases[] = {
.test_descr = "HMAC-SHA512 Digest",
.test_data = &hmac_sha512_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
{
.test_descr = "HMAC-SHA512 Digest Verify",
.test_data = &hmac_sha512_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_QAT
},
};
diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst
index a7b28eb..2173819 100644
--- a/doc/guides/cryptodevs/qat.rst
+++ b/doc/guides/cryptodevs/qat.rst
@@ -74,7 +74,6 @@ Limitations
-----------
* Chained mbufs are not supported.
-* Hash only is not supported except SNOW 3G UIA2 and KASUMI F9.
* Cipher only is not supported except SNOW 3G UEA2, KASUMI F8 and 3DES.
* Only supports the session-oriented API implementation (session-less APIs are not supported).
* SNOW 3G (UEA2) and KASUMI (F8) supported only if cipher length, cipher offset fields are byte-aligned.
--
2.9.4
next prev parent reply other threads:[~2017-08-16 8:16 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-16 0:16 [dpdk-stable] [PATCH 0/5] Backported crypto patches to DPDK 16.11 Pablo de Lara
2017-08-16 0:16 ` [dpdk-stable] [PATCH 1/5] crypto/qat: fix HMAC supported key sizes Pablo de Lara
2017-08-16 0:16 ` [dpdk-stable] [PATCH 2/5] crypto/qat: fix SHA384-HMAC block size Pablo de Lara
2017-08-16 0:16 ` [dpdk-stable] [PATCH 3/5] doc: remove incorrect limitation on AESNI-MB PMD Pablo de Lara
2017-08-16 0:16 ` Pablo de Lara [this message]
2017-08-16 0:16 ` [dpdk-stable] [PATCH 5/5] test/crypto: fix wrong AAD setting Pablo de Lara
2017-08-16 8:23 ` [dpdk-stable] [PATCH 0/5] Backported crypto patches to DPDK 16.11 Yuanhan Liu
2017-08-16 8:25 ` De Lara Guarch, Pablo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170816001616.8036-5-pablo.de.lara.guarch@intel.com \
--to=pablo.de.lara.guarch@intel.com \
--cc=stable@dpdk.org \
--cc=yliu@fridaylinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).