* [dpdk-stable] [PATCH] igb_uio: revert open and release operations
@ 2017-10-17 20:14 Ferruh Yigit
2017-10-17 20:33 ` Thomas Monjalon
` (3 more replies)
0 siblings, 4 replies; 33+ messages in thread
From: Ferruh Yigit @ 2017-10-17 20:14 UTC (permalink / raw)
To: Thomas Monjalon, Ferruh Yigit
Cc: dev, Jianfeng Tan, Jingjing Wu, Shijith Thotton, Gregory Etelson,
Harish Patil, George Prekas, stable
This reverts commit 6b9ed026a8704b9e5ee5da7997617ef7cc82e114.
This reverts commit 5f6ff30dc5075c49069d684bab229aef7ff0fdc3.
This reverts commit b58eedfc7dd57eef6d12e2c654a52c834f36084a.
There were bug reports about terminated application may leave device in
undesired state:
http://dpdk.org/ml/archives/dev/2016-November/049745.html
http://dpdk.org/ml/archives/dev/2016-November/050932.html
And a proposal to fix:
http://dpdk.org/ml/archives/dev/2016-December/051844.html
Later another proposal triggered the discussion:
http://dpdk.org/ml/archives/dev/2017-May/066317.html
Finally a fix patch pushed into v17.08:
Commit: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device file")
Later a regression report sent related to the pushed patch:
http://dpdk.org/ml/archives/dev/2017-September/075236.html
And a fix for regression integrated into v17.11-rc1:
http://dpdk.org/ml/archives/dev/2017-October/079166.html
Commit: 5f6ff30dc507 ("igb_uio: fix interrupt enablement after FLR in VM")
Commit: 6b9ed026a870 ("igb_uio: fix build with kernel <= 3.17")
Even after the fix qede PMD reported to be broken:
http://dpdk.org/ml/archives/dev/2017-October/079359.html
So this patch reverts original fix and related commits. The related
igb_uio code part turns back to v17.05 base.
Cc: Jianfeng Tan <jianfeng.tan@intel.com>
Cc: Jingjing Wu <jingjing.wu@intel.com>
Cc: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Cc: Gregory Etelson <gregory@weka.io>
Cc: Harish Patil <harish.patil@cavium.com>
Cc: George Prekas <george.prekas@epfl.ch>
Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device file")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
---
It would be nice to solve this issue in LTS release, but being close to
the release and the error report without details makes it hard to work
more on this issue.
Thanks everyone who spent effort for this, hopefully we can continue to
work on next release cycle.
Jingjing, there is a i40e commit, was part of igb_uio fix patchset, is
it generic, or needs to be reverted with this patch?
Commit: 8cacf78469a7 ("net/i40e: fix VF initialization error")
---
lib/librte_eal/linuxapp/igb_uio/igb_uio.c | 201 +++++++++++-------------------
1 file changed, 76 insertions(+), 125 deletions(-)
diff --git a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
index f7ef82554..786df68a2 100644
--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
@@ -49,6 +49,7 @@ struct rte_uio_pci_dev {
static char *intr_mode;
static enum rte_intr_mode igbuio_intr_mode_preferred = RTE_INTR_MODE_MSIX;
+
/* sriov sysfs */
static ssize_t
show_max_vfs(struct device *dev, struct device_attribute *attr,
@@ -207,22 +208,80 @@ igbuio_pci_irqcontrol(struct uio_info *info, s32 irq_state)
* If yes, disable it here and will be enable later.
*/
static irqreturn_t
-igbuio_pci_irqhandler(int irq, void *dev_id)
+igbuio_pci_irqhandler(int irq, struct uio_info *info)
{
- struct rte_uio_pci_dev *udev = (struct rte_uio_pci_dev *)dev_id;
- struct uio_info *info = &udev->info;
+ struct rte_uio_pci_dev *udev = info->priv;
/* Legacy mode need to mask in hardware */
if (udev->mode == RTE_INTR_MODE_LEGACY &&
!pci_check_and_mask_intx(udev->pdev))
return IRQ_NONE;
- uio_event_notify(info);
-
/* Message signal mode, no share IRQ and automasked */
return IRQ_HANDLED;
}
+/* Remap pci resources described by bar #pci_bar in uio resource n. */
+static int
+igbuio_pci_setup_iomem(struct pci_dev *dev, struct uio_info *info,
+ int n, int pci_bar, const char *name)
+{
+ unsigned long addr, len;
+ void *internal_addr;
+
+ if (n >= ARRAY_SIZE(info->mem))
+ return -EINVAL;
+
+ addr = pci_resource_start(dev, pci_bar);
+ len = pci_resource_len(dev, pci_bar);
+ if (addr == 0 || len == 0)
+ return -1;
+ internal_addr = ioremap(addr, len);
+ if (internal_addr == NULL)
+ return -1;
+ info->mem[n].name = name;
+ info->mem[n].addr = addr;
+ info->mem[n].internal_addr = internal_addr;
+ info->mem[n].size = len;
+ info->mem[n].memtype = UIO_MEM_PHYS;
+ return 0;
+}
+
+/* Get pci port io resources described by bar #pci_bar in uio resource n. */
+static int
+igbuio_pci_setup_ioport(struct pci_dev *dev, struct uio_info *info,
+ int n, int pci_bar, const char *name)
+{
+ unsigned long addr, len;
+
+ if (n >= ARRAY_SIZE(info->port))
+ return -EINVAL;
+
+ addr = pci_resource_start(dev, pci_bar);
+ len = pci_resource_len(dev, pci_bar);
+ if (addr == 0 || len == 0)
+ return -EINVAL;
+
+ info->port[n].name = name;
+ info->port[n].start = addr;
+ info->port[n].size = len;
+ info->port[n].porttype = UIO_PORT_X86;
+
+ return 0;
+}
+
+/* Unmap previously ioremap'd resources */
+static void
+igbuio_pci_release_iomem(struct uio_info *info)
+{
+ int i;
+
+ for (i = 0; i < MAX_UIO_MAPS; i++) {
+ if (info->mem[i].internal_addr)
+ iounmap(info->mem[i].internal_addr);
+ }
+}
+
static int
igbuio_pci_enable_interrupts(struct rte_uio_pci_dev *udev)
{
@@ -252,7 +311,6 @@ igbuio_pci_enable_interrupts(struct rte_uio_pci_dev *udev)
break;
}
#endif
-
/* fall back to MSI */
case RTE_INTR_MODE_MSI:
#ifndef HAVE_ALLOC_IRQ_VECTORS
@@ -291,28 +349,15 @@ igbuio_pci_enable_interrupts(struct rte_uio_pci_dev *udev)
default:
dev_err(&udev->pdev->dev, "invalid IRQ mode %u",
igbuio_intr_mode_preferred);
- udev->info.irq = UIO_IRQ_NONE;
err = -EINVAL;
}
- if (udev->info.irq != UIO_IRQ_NONE)
- err = request_irq(udev->info.irq, igbuio_pci_irqhandler,
- udev->info.irq_flags, udev->info.name,
- udev);
- dev_info(&udev->pdev->dev, "uio device registered with irq %lx\n",
- udev->info.irq);
-
return err;
}
static void
igbuio_pci_disable_interrupts(struct rte_uio_pci_dev *udev)
{
- if (udev->info.irq) {
- free_irq(udev->info.irq, udev);
- udev->info.irq = 0;
- }
-
#ifndef HAVE_ALLOC_IRQ_VECTORS
if (udev->mode == RTE_INTR_MODE_MSIX)
pci_disable_msix(udev->pdev);
@@ -325,109 +370,6 @@ igbuio_pci_disable_interrupts(struct rte_uio_pci_dev *udev)
#endif
}
-
-/**
- * This gets called while opening uio device file.
- */
-static int
-igbuio_pci_open(struct uio_info *info, struct inode *inode)
-{
- struct rte_uio_pci_dev *udev = info->priv;
- struct pci_dev *dev = udev->pdev;
- int err;
-
- pci_reset_function(dev);
-
- /* set bus master, which was cleared by the reset function */
- pci_set_master(dev);
-
- /* enable interrupts */
- err = igbuio_pci_enable_interrupts(udev);
- if (err) {
- dev_err(&dev->dev, "Enable interrupt fails\n");
- return err;
- }
- return 0;
-}
-
-static int
-igbuio_pci_release(struct uio_info *info, struct inode *inode)
-{
- struct rte_uio_pci_dev *udev = info->priv;
- struct pci_dev *dev = udev->pdev;
-
- /* disable interrupts */
- igbuio_pci_disable_interrupts(udev);
-
- /* stop the device from further DMA */
- pci_clear_master(dev);
-
- pci_reset_function(dev);
-
- return 0;
-}
-
-/* Remap pci resources described by bar #pci_bar in uio resource n. */
-static int
-igbuio_pci_setup_iomem(struct pci_dev *dev, struct uio_info *info,
- int n, int pci_bar, const char *name)
-{
- unsigned long addr, len;
- void *internal_addr;
-
- if (n >= ARRAY_SIZE(info->mem))
- return -EINVAL;
-
- addr = pci_resource_start(dev, pci_bar);
- len = pci_resource_len(dev, pci_bar);
- if (addr == 0 || len == 0)
- return -1;
- internal_addr = ioremap(addr, len);
- if (internal_addr == NULL)
- return -1;
- info->mem[n].name = name;
- info->mem[n].addr = addr;
- info->mem[n].internal_addr = internal_addr;
- info->mem[n].size = len;
- info->mem[n].memtype = UIO_MEM_PHYS;
- return 0;
-}
-
-/* Get pci port io resources described by bar #pci_bar in uio resource n. */
-static int
-igbuio_pci_setup_ioport(struct pci_dev *dev, struct uio_info *info,
- int n, int pci_bar, const char *name)
-{
- unsigned long addr, len;
-
- if (n >= ARRAY_SIZE(info->port))
- return -EINVAL;
-
- addr = pci_resource_start(dev, pci_bar);
- len = pci_resource_len(dev, pci_bar);
- if (addr == 0 || len == 0)
- return -EINVAL;
-
- info->port[n].name = name;
- info->port[n].start = addr;
- info->port[n].size = len;
- info->port[n].porttype = UIO_PORT_X86;
-
- return 0;
-}
-
-/* Unmap previously ioremap'd resources */
-static void
-igbuio_pci_release_iomem(struct uio_info *info)
-{
- int i;
-
- for (i = 0; i < MAX_UIO_MAPS; i++) {
- if (info->mem[i].internal_addr)
- iounmap(info->mem[i].internal_addr);
- }
-}
-
static int
igbuio_setup_bars(struct pci_dev *dev, struct uio_info *info)
{
@@ -518,16 +460,19 @@ igbuio_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* fill uio infos */
udev->info.name = "igb_uio";
udev->info.version = "0.1";
+ udev->info.handler = igbuio_pci_irqhandler;
udev->info.irqcontrol = igbuio_pci_irqcontrol;
- udev->info.open = igbuio_pci_open;
- udev->info.release = igbuio_pci_release;
udev->info.priv = udev;
udev->pdev = dev;
- err = sysfs_create_group(&dev->dev.kobj, &dev_attr_grp);
+ err = igbuio_pci_enable_interrupts(udev);
if (err != 0)
goto fail_release_iomem;
+ err = sysfs_create_group(&dev->dev.kobj, &dev_attr_grp);
+ if (err != 0)
+ goto fail_disable_interrupts;
+
/* register uio driver */
err = uio_register_device(&dev->dev, &udev->info);
if (err != 0)
@@ -535,6 +480,9 @@ igbuio_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
pci_set_drvdata(dev, udev);
+ dev_info(&dev->dev, "uio device registered with irq %lx\n",
+ udev->info.irq);
+
/*
* Doing a harmless dma mapping for attaching the device to
* the iommu identity mapping if kernel boots with iommu=pt.
@@ -560,6 +508,8 @@ igbuio_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
fail_remove_group:
sysfs_remove_group(&dev->dev.kobj, &dev_attr_grp);
+fail_disable_interrupts:
+ igbuio_pci_disable_interrupts(udev);
fail_release_iomem:
igbuio_pci_release_iomem(&udev->info);
pci_disable_device(dev);
@@ -576,6 +526,7 @@ igbuio_pci_remove(struct pci_dev *dev)
sysfs_remove_group(&dev->dev.kobj, &dev_attr_grp);
uio_unregister_device(&udev->info);
+ igbuio_pci_disable_interrupts(udev);
igbuio_pci_release_iomem(&udev->info);
pci_disable_device(dev);
pci_set_drvdata(dev, NULL);
--
2.13.6
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [PATCH] igb_uio: revert open and release operations
2017-10-17 20:14 [dpdk-stable] [PATCH] igb_uio: revert open and release operations Ferruh Yigit
@ 2017-10-17 20:33 ` Thomas Monjalon
2017-10-18 4:50 ` Patil, Harish
2017-10-18 0:14 ` [dpdk-stable] [PATCH] igb_uio: revert open and release operations Wu, Jingjing
` (2 subsequent siblings)
3 siblings, 1 reply; 33+ messages in thread
From: Thomas Monjalon @ 2017-10-17 20:33 UTC (permalink / raw)
To: Ferruh Yigit, Harish Patil
Cc: dev, Jianfeng Tan, Jingjing Wu, Shijith Thotton, Gregory Etelson,
George Prekas, stable
17/10/2017 22:14, Ferruh Yigit:
> There were bug reports about terminated application may leave device in
> undesired state:
> http://dpdk.org/ml/archives/dev/2016-November/049745.html
> http://dpdk.org/ml/archives/dev/2016-November/050932.html
>
> And a proposal to fix:
> http://dpdk.org/ml/archives/dev/2016-December/051844.html
>
> Later another proposal triggered the discussion:
> http://dpdk.org/ml/archives/dev/2017-May/066317.html
>
> Finally a fix patch pushed into v17.08:
> Commit: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device file")
>
> Later a regression report sent related to the pushed patch:
> http://dpdk.org/ml/archives/dev/2017-September/075236.html
>
> And a fix for regression integrated into v17.11-rc1:
> http://dpdk.org/ml/archives/dev/2017-October/079166.html
> Commit: 5f6ff30dc507 ("igb_uio: fix interrupt enablement after FLR in VM")
> Commit: 6b9ed026a870 ("igb_uio: fix build with kernel <= 3.17")
>
> Even after the fix qede PMD reported to be broken:
> http://dpdk.org/ml/archives/dev/2017-October/079359.html
>
> So this patch reverts original fix and related commits. The related
> igb_uio code part turns back to v17.05 base.
[...]
> ---
> It would be nice to solve this issue in LTS release, but being close to
> the release and the error report without details makes it hard to work
> more on this issue.
With this revert, we are back to the original issue.
We must really try the proposed solution.
Harish, please describe your issue and think how it could be fixed.
Jingjing made it work for i40e.
I know it is less effort to request a simple revert.
Please let's try to fix it once for all.
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [PATCH] igb_uio: revert open and release operations
2017-10-17 20:33 ` Thomas Monjalon
@ 2017-10-18 4:50 ` Patil, Harish
2017-10-19 22:43 ` Patil, Harish
0 siblings, 1 reply; 33+ messages in thread
From: Patil, Harish @ 2017-10-18 4:50 UTC (permalink / raw)
To: Thomas Monjalon, Ferruh Yigit
Cc: dev, Jianfeng Tan, Jingjing Wu, Thotton, Shijith,
Gregory Etelson, George Prekas, stable
-----Original Message-----
From: Thomas Monjalon <thomas@monjalon.net>
Date: Tuesday, October 17, 2017 at 1:33 PM
To: Ferruh Yigit <ferruh.yigit@intel.com>, Harish Patil
<Harish.Patil@cavium.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, Jianfeng Tan <jianfeng.tan@intel.com>,
Jingjing Wu <jingjing.wu@intel.com>, "Thotton, Shijith"
<Shijith.Thotton@cavium.com>, Gregory Etelson <gregory@weka.io>, George
Prekas <george.prekas@epfl.ch>, "stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [PATCH] igb_uio: revert open and release operations
>17/10/2017 22:14, Ferruh Yigit:
>> There were bug reports about terminated application may leave device in
>> undesired state:
>> http://dpdk.org/ml/archives/dev/2016-November/049745.html
>> http://dpdk.org/ml/archives/dev/2016-November/050932.html
>>
>> And a proposal to fix:
>> http://dpdk.org/ml/archives/dev/2016-December/051844.html
>>
>> Later another proposal triggered the discussion:
>> http://dpdk.org/ml/archives/dev/2017-May/066317.html
>>
>> Finally a fix patch pushed into v17.08:
>> Commit: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of
>>device file")
>>
>> Later a regression report sent related to the pushed patch:
>> http://dpdk.org/ml/archives/dev/2017-September/075236.html
>>
>> And a fix for regression integrated into v17.11-rc1:
>> http://dpdk.org/ml/archives/dev/2017-October/079166.html
>> Commit: 5f6ff30dc507 ("igb_uio: fix interrupt enablement after FLR in
>>VM")
>> Commit: 6b9ed026a870 ("igb_uio: fix build with kernel <= 3.17")
>>
>> Even after the fix qede PMD reported to be broken:
>> http://dpdk.org/ml/archives/dev/2017-October/079359.html
>>
>> So this patch reverts original fix and related commits. The related
>> igb_uio code part turns back to v17.05 base.
>[...]
>> ---
>> It would be nice to solve this issue in LTS release, but being close to
>> the release and the error report without details makes it hard to work
>> more on this issue.
>
>With this revert, we are back to the original issue.
>We must really try the proposed solution.
>Harish, please describe your issue and think how it could be fixed.
>Jingjing made it work for i40e.
>I know it is less effort to request a simple revert.
>Please let's try to fix it once for all.
Hi Ferruh/Thomas,
I’m discussing it internally, so please hold on committing this patch till
I revert back to you.
Thanks.
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [PATCH] igb_uio: revert open and release operations
2017-10-18 4:50 ` Patil, Harish
@ 2017-10-19 22:43 ` Patil, Harish
2017-10-20 1:15 ` Ferruh Yigit
0 siblings, 1 reply; 33+ messages in thread
From: Patil, Harish @ 2017-10-19 22:43 UTC (permalink / raw)
To: Thomas Monjalon, Ferruh Yigit
Cc: dev, Jianfeng Tan, Jingjing Wu, Thotton, Shijith,
Gregory Etelson, George Prekas, stable
-----Original Message-----
From: Harish Patil <Harish.Patil@cavium.com>
Date: Tuesday, October 17, 2017 at 9:50 PM
To: Thomas Monjalon <thomas@monjalon.net>, Ferruh Yigit
<ferruh.yigit@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, Jianfeng Tan <jianfeng.tan@intel.com>,
Jingjing Wu <jingjing.wu@intel.com>, "Thotton, Shijith"
<Shijith.Thotton@cavium.com>, Gregory Etelson <gregory@weka.io>, George
Prekas <george.prekas@epfl.ch>, "stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [PATCH] igb_uio: revert open and release operations
>
>
>-----Original Message-----
>From: Thomas Monjalon <thomas@monjalon.net>
>Date: Tuesday, October 17, 2017 at 1:33 PM
>To: Ferruh Yigit <ferruh.yigit@intel.com>, Harish Patil
><Harish.Patil@cavium.com>
>Cc: "dev@dpdk.org" <dev@dpdk.org>, Jianfeng Tan <jianfeng.tan@intel.com>,
>Jingjing Wu <jingjing.wu@intel.com>, "Thotton, Shijith"
><Shijith.Thotton@cavium.com>, Gregory Etelson <gregory@weka.io>, George
>Prekas <george.prekas@epfl.ch>, "stable@dpdk.org" <stable@dpdk.org>
>Subject: Re: [PATCH] igb_uio: revert open and release operations
>
>>17/10/2017 22:14, Ferruh Yigit:
>>> There were bug reports about terminated application may leave device in
>>> undesired state:
>>> http://dpdk.org/ml/archives/dev/2016-November/049745.html
>>> http://dpdk.org/ml/archives/dev/2016-November/050932.html
>>>
>>> And a proposal to fix:
>>> http://dpdk.org/ml/archives/dev/2016-December/051844.html
>>>
>>> Later another proposal triggered the discussion:
>>> http://dpdk.org/ml/archives/dev/2017-May/066317.html
>>>
>>> Finally a fix patch pushed into v17.08:
>>> Commit: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of
>>>device file")
>>>
>>> Later a regression report sent related to the pushed patch:
>>> http://dpdk.org/ml/archives/dev/2017-September/075236.html
>>>
>>> And a fix for regression integrated into v17.11-rc1:
>>> http://dpdk.org/ml/archives/dev/2017-October/079166.html
>>> Commit: 5f6ff30dc507 ("igb_uio: fix interrupt enablement after FLR in
>>>VM")
>>> Commit: 6b9ed026a870 ("igb_uio: fix build with kernel <= 3.17")
>>>
>>> Even after the fix qede PMD reported to be broken:
>>> http://dpdk.org/ml/archives/dev/2017-October/079359.html
>>>
>>> So this patch reverts original fix and related commits. The related
>>> igb_uio code part turns back to v17.05 base.
>>[...]
>>> ---
>>> It would be nice to solve this issue in LTS release, but being close to
>>> the release and the error report without details makes it hard to work
>>> more on this issue.
>>
>>With this revert, we are back to the original issue.
>>We must really try the proposed solution.
>>Harish, please describe your issue and think how it could be fixed.
>>Jingjing made it work for i40e.
>>I know it is less effort to request a simple revert.
>>Please let's try to fix it once for all.
>
>Hi Ferruh/Thomas,
>I’m discussing it internally, so please hold on committing this patch till
>I revert back to you.
>
>Thanks.
>[Harish]
> 1) With the introduction of:
>Commit: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of
>device file”)
We saw failures with qede PF & SR-IOV VF initialization in PCI passthru
mode.
>
>PF PCI passthru mode initialization failure was resolved by:
>“Commit: 5f6ff30dc507 ("igb_uio: fix interrupt enablement after FLR in
>VM")
>SR-IOV VF PCI passthru mode initialization issue is that PCI FLR and
>related device cleanup is not completed by the time VF driver starts
>loading. It results in the mbox command failure sent over the HW channel
>between VF and PF.
>
>Even though pci_reset_function() waits for the stipulated amount of time
>per standards, VF FLR takes longer than that and pci_reset_function() &
>igb_uio_open() call returns before FLR completes and VF PMD driver tries
>to load before FLR completes leading to VF PMD initialization failure.
>
>
>We can work around this problem by adding driver delay/retry logic since
>there is no deterministic way of detecting FLR completion. But this is
>going to increase the driver load time.
>
>2) With the above patch ("igb_uio: issue FLR during open and release of
>device file), FLR is going to be issued unconditionally on all devices
>during igb_uio_open. We think it’s an over kill. FLR is required only for
>previous abnormal app termination. We already handle the abnormal app
>termination by doing necessary cleanup in the driver during load. This
>cleanup is more efficient as it is done only when required. So we feel
>that the drivers/devices needing such cleanup (the two cases listed
>below) should do it conditionally when required rather than
>igb_uio_open() unconditionally performing FLR all the time.
>
>e.g.,
- cdb166963cae ("net/liquidio: add API for VF FLR”)
>
>
>- http://dpdk.org/ml/archives/dev/2017-May/066317.html
Thanks,
Harish
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [PATCH] igb_uio: revert open and release operations
2017-10-19 22:43 ` Patil, Harish
@ 2017-10-20 1:15 ` Ferruh Yigit
2017-10-20 15:26 ` Tan, Jianfeng
0 siblings, 1 reply; 33+ messages in thread
From: Ferruh Yigit @ 2017-10-20 1:15 UTC (permalink / raw)
To: Patil, Harish, Thomas Monjalon
Cc: dev, Jianfeng Tan, Jingjing Wu, Thotton, Shijith,
Gregory Etelson, George Prekas, stable, Sergio Gonzalez Monroy,
Glynn, Michael J
On 10/19/2017 3:43 PM, Patil, Harish wrote:
> -----Original Message-----
> From: Harish Patil <Harish.Patil@cavium.com>
> Date: Tuesday, October 17, 2017 at 9:50 PM
> To: Thomas Monjalon <thomas@monjalon.net>, Ferruh Yigit
> <ferruh.yigit@intel.com>
> Cc: "dev@dpdk.org" <dev@dpdk.org>, Jianfeng Tan <jianfeng.tan@intel.com>,
> Jingjing Wu <jingjing.wu@intel.com>, "Thotton, Shijith"
> <Shijith.Thotton@cavium.com>, Gregory Etelson <gregory@weka.io>, George
> Prekas <george.prekas@epfl.ch>, "stable@dpdk.org" <stable@dpdk.org>
> Subject: Re: [PATCH] igb_uio: revert open and release operations
>>
>>
>> -----Original Message-----
>> From: Thomas Monjalon <thomas@monjalon.net>
>> Date: Tuesday, October 17, 2017 at 1:33 PM
>> To: Ferruh Yigit <ferruh.yigit@intel.com>, Harish Patil
>> <Harish.Patil@cavium.com>
>> Cc: "dev@dpdk.org" <dev@dpdk.org>, Jianfeng Tan <jianfeng.tan@intel.com>,
>> Jingjing Wu <jingjing.wu@intel.com>, "Thotton, Shijith"
>> <Shijith.Thotton@cavium.com>, Gregory Etelson <gregory@weka.io>, George
>> Prekas <george.prekas@epfl.ch>, "stable@dpdk.org" <stable@dpdk.org>
>> Subject: Re: [PATCH] igb_uio: revert open and release operations
>>
>>> 17/10/2017 22:14, Ferruh Yigit:
>>>> There were bug reports about terminated application may leave device in
>>>> undesired state:
>>>> http://dpdk.org/ml/archives/dev/2016-November/049745.html
>>>> http://dpdk.org/ml/archives/dev/2016-November/050932.html
>>>>
>>>> And a proposal to fix:
>>>> http://dpdk.org/ml/archives/dev/2016-December/051844.html
>>>>
>>>> Later another proposal triggered the discussion:
>>>> http://dpdk.org/ml/archives/dev/2017-May/066317.html
>>>>
>>>> Finally a fix patch pushed into v17.08:
>>>> Commit: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of
>>>> device file")
>>>>
>>>> Later a regression report sent related to the pushed patch:
>>>> http://dpdk.org/ml/archives/dev/2017-September/075236.html
>>>>
>>>> And a fix for regression integrated into v17.11-rc1:
>>>> http://dpdk.org/ml/archives/dev/2017-October/079166.html
>>>> Commit: 5f6ff30dc507 ("igb_uio: fix interrupt enablement after FLR in
>>>> VM")
>>>> Commit: 6b9ed026a870 ("igb_uio: fix build with kernel <= 3.17")
>>>>
>>>> Even after the fix qede PMD reported to be broken:
>>>> http://dpdk.org/ml/archives/dev/2017-October/079359.html
>>>>
>>>> So this patch reverts original fix and related commits. The related
>>>> igb_uio code part turns back to v17.05 base.
>>> [...]
>>>> ---
>>>> It would be nice to solve this issue in LTS release, but being close to
>>>> the release and the error report without details makes it hard to work
>>>> more on this issue.
>>>
>>> With this revert, we are back to the original issue.
>>> We must really try the proposed solution.
>>> Harish, please describe your issue and think how it could be fixed.
>>> Jingjing made it work for i40e.
>>> I know it is less effort to request a simple revert.
>>> Please let's try to fix it once for all.
>>
>> Hi Ferruh/Thomas,
>> I’m discussing it internally, so please hold on committing this patch till
>> I revert back to you.
>>
>> Thanks.
>
>> [Harish]
>
>> 1) With the introduction of:
>> Commit: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of
>> device file”)
> We saw failures with qede PF & SR-IOV VF initialization in PCI passthru
> mode.
>
>>
>> PF PCI passthru mode initialization failure was resolved by:
>> “Commit: 5f6ff30dc507 ("igb_uio: fix interrupt enablement after FLR in
>> VM")
Thank you for the update.
>
>> SR-IOV VF PCI passthru mode initialization issue is that PCI FLR and
>> related device cleanup is not completed by the time VF driver starts
>> loading. It results in the mbox command failure sent over the HW channel
>> between VF and PF.
This seems same reason why i40e added a check and wait loop.
>>
>> Even though pci_reset_function() waits for the stipulated amount of time
>> per standards, VF FLR takes longer than that and pci_reset_function() &
>> igb_uio_open() call returns before FLR completes and VF PMD driver tries
>> to load before FLR completes leading to VF PMD initialization failure.
>>
>>
>> We can work around this problem by adding driver delay/retry logic since
>> there is no deterministic way of detecting FLR completion. But this is
>> going to increase the driver load time.
>>
>
>> 2) With the above patch ("igb_uio: issue FLR during open and release of
>> device file), FLR is going to be issued unconditionally on all devices
>> during igb_uio_open. We think it’s an over kill. FLR is required only for
>> previous abnormal app termination. We already handle the abnormal app
>> termination by doing necessary cleanup in the driver during load. This
>> cleanup is more efficient as it is done only when required. So we feel
>> that the drivers/devices needing such cleanup (the two cases listed
>> below) should do it conditionally when required rather than
>> igb_uio_open() unconditionally performing FLR all the time.
>>
>> e.g.,
> - cdb166963cae ("net/liquidio: add API for VF FLR”)
Both 1) and 2) related to the pci_reset during open().
But the main functionality we are looking for is the pci_reset in release().
So we can remove reset during open() [1].
Will disabling pci_reset in open() [2] solve your problems?
Jingjing, Jianfeng,
What do you think?
[1]
Perhaps will need to revert or partially revert liquidio patch after this.
[2]
disable line "pci_reset_function(dev);" in the igbuio_pci_open()
http://dpdk.org/browse/dpdk/tree/lib/librte_eal/linuxapp/igb_uio/igb_uio.c#n339
>>
>>
>> - http://dpdk.org/ml/archives/dev/2017-May/066317.html
>
> Thanks,
> Harish
>>
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [PATCH] igb_uio: revert open and release operations
2017-10-20 1:15 ` Ferruh Yigit
@ 2017-10-20 15:26 ` Tan, Jianfeng
2017-10-20 16:32 ` Ferruh Yigit
0 siblings, 1 reply; 33+ messages in thread
From: Tan, Jianfeng @ 2017-10-20 15:26 UTC (permalink / raw)
To: Ferruh Yigit, Patil, Harish, Thomas Monjalon
Cc: dev, Jingjing Wu, Thotton, Shijith, Gregory Etelson,
George Prekas, stable, Sergio Gonzalez Monroy, Glynn, Michael J
Hi Ferruh & Harish,
On 10/20/2017 9:15 AM, Ferruh Yigit wrote:
> On 10/19/2017 3:43 PM, Patil, Harish wrote:
>> -----Original Message-----
>> From: Harish Patil <Harish.Patil@cavium.com>
>> Date: Tuesday, October 17, 2017 at 9:50 PM
>> To: Thomas Monjalon <thomas@monjalon.net>, Ferruh Yigit
>> <ferruh.yigit@intel.com>
>> Cc: "dev@dpdk.org" <dev@dpdk.org>, Jianfeng Tan <jianfeng.tan@intel.com>,
>> Jingjing Wu <jingjing.wu@intel.com>, "Thotton, Shijith"
>> <Shijith.Thotton@cavium.com>, Gregory Etelson <gregory@weka.io>, George
>> Prekas <george.prekas@epfl.ch>, "stable@dpdk.org" <stable@dpdk.org>
>> Subject: Re: [PATCH] igb_uio: revert open and release operations
>>>
>>> -----Original Message-----
>>> From: Thomas Monjalon <thomas@monjalon.net>
>>> Date: Tuesday, October 17, 2017 at 1:33 PM
>>> To: Ferruh Yigit <ferruh.yigit@intel.com>, Harish Patil
>>> <Harish.Patil@cavium.com>
>>> Cc: "dev@dpdk.org" <dev@dpdk.org>, Jianfeng Tan <jianfeng.tan@intel.com>,
>>> Jingjing Wu <jingjing.wu@intel.com>, "Thotton, Shijith"
>>> <Shijith.Thotton@cavium.com>, Gregory Etelson <gregory@weka.io>, George
>>> Prekas <george.prekas@epfl.ch>, "stable@dpdk.org" <stable@dpdk.org>
>>> Subject: Re: [PATCH] igb_uio: revert open and release operations
>>>
>>>> 17/10/2017 22:14, Ferruh Yigit:
>>>>> There were bug reports about terminated application may leave device in
>>>>> undesired state:
>>>>> http://dpdk.org/ml/archives/dev/2016-November/049745.html
>>>>> http://dpdk.org/ml/archives/dev/2016-November/050932.html
>>>>>
>>>>> And a proposal to fix:
>>>>> http://dpdk.org/ml/archives/dev/2016-December/051844.html
>>>>>
>>>>> Later another proposal triggered the discussion:
>>>>> http://dpdk.org/ml/archives/dev/2017-May/066317.html
>>>>>
>>>>> Finally a fix patch pushed into v17.08:
>>>>> Commit: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of
>>>>> device file")
>>>>>
>>>>> Later a regression report sent related to the pushed patch:
>>>>> http://dpdk.org/ml/archives/dev/2017-September/075236.html
>>>>>
>>>>> And a fix for regression integrated into v17.11-rc1:
>>>>> http://dpdk.org/ml/archives/dev/2017-October/079166.html
>>>>> Commit: 5f6ff30dc507 ("igb_uio: fix interrupt enablement after FLR in
>>>>> VM")
>>>>> Commit: 6b9ed026a870 ("igb_uio: fix build with kernel <= 3.17")
>>>>>
>>>>> Even after the fix qede PMD reported to be broken:
>>>>> http://dpdk.org/ml/archives/dev/2017-October/079359.html
>>>>>
>>>>> So this patch reverts original fix and related commits. The related
>>>>> igb_uio code part turns back to v17.05 base.
>>>> [...]
>>>>> ---
>>>>> It would be nice to solve this issue in LTS release, but being close to
>>>>> the release and the error report without details makes it hard to work
>>>>> more on this issue.
>>>> With this revert, we are back to the original issue.
>>>> We must really try the proposed solution.
>>>> Harish, please describe your issue and think how it could be fixed.
>>>> Jingjing made it work for i40e.
>>>> I know it is less effort to request a simple revert.
>>>> Please let's try to fix it once for all.
>>> Hi Ferruh/Thomas,
>>> I’m discussing it internally, so please hold on committing this patch till
>>> I revert back to you.
>>>
>>> Thanks.
>>> [Harish]
>>> 1) With the introduction of:
>>> Commit: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of
>>> device file”)
>> We saw failures with qede PF & SR-IOV VF initialization in PCI passthru
>> mode.
>>
>>> PF PCI passthru mode initialization failure was resolved by:
>>> “Commit: 5f6ff30dc507 ("igb_uio: fix interrupt enablement after FLR in
>>> VM")
> Thank you for the update.
>
>>> SR-IOV VF PCI passthru mode initialization issue is that PCI FLR and
>>> related device cleanup is not completed by the time VF driver starts
>>> loading. It results in the mbox command failure sent over the HW channel
>>> between VF and PF.
> This seems same reason why i40e added a check and wait loop.
>
>>> Even though pci_reset_function() waits for the stipulated amount of time
>>> per standards, VF FLR takes longer than that and pci_reset_function() &
>>> igb_uio_open() call returns before FLR completes and VF PMD driver tries
>>> to load before FLR completes leading to VF PMD initialization failure.
>>>
>>>
>>> We can work around this problem by adding driver delay/retry logic since
>>> there is no deterministic way of detecting FLR completion. But this is
>>> going to increase the driver load time.
>>>
>>> 2) With the above patch ("igb_uio: issue FLR during open and release of
>>> device file), FLR is going to be issued unconditionally on all devices
>>> during igb_uio_open. We think it’s an over kill. FLR is required only for
>>> previous abnormal app termination. We already handle the abnormal app
>>> termination by doing necessary cleanup in the driver during load. This
>>> cleanup is more efficient as it is done only when required. So we feel
>>> that the drivers/devices needing such cleanup (the two cases listed
>>> below) should do it conditionally when required rather than
>>> igb_uio_open() unconditionally performing FLR all the time.
>>>
>>> e.g.,
>> - cdb166963cae ("net/liquidio: add API for VF FLR”)
> Both 1) and 2) related to the pci_reset during open().
> But the main functionality we are looking for is the pci_reset in release().
> So we can remove reset during open() [1].
>
> Will disabling pci_reset in open() [2] solve your problems?
>
> Jingjing, Jianfeng,
> What do you think?
If [2] can work for all drivers, I agree with this option.
Thanks,
Jianfeng
>
>
> [1]
> Perhaps will need to revert or partially revert liquidio patch after this.
>
> [2]
> disable line "pci_reset_function(dev);" in the igbuio_pci_open()
> http://dpdk.org/browse/dpdk/tree/lib/librte_eal/linuxapp/igb_uio/igb_uio.c#n339
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [PATCH] igb_uio: revert open and release operations
2017-10-20 15:26 ` Tan, Jianfeng
@ 2017-10-20 16:32 ` Ferruh Yigit
2017-10-20 16:55 ` [dpdk-stable] [PATCH] igb_uio: remove device reset in open Ferruh Yigit
0 siblings, 1 reply; 33+ messages in thread
From: Ferruh Yigit @ 2017-10-20 16:32 UTC (permalink / raw)
To: Tan, Jianfeng, Patil, Harish, Thomas Monjalon
Cc: dev, Jingjing Wu, Thotton, Shijith, Gregory Etelson,
George Prekas, stable, Sergio Gonzalez Monroy, Glynn, Michael J
On 10/20/2017 8:26 AM, Tan, Jianfeng wrote:
> Hi Ferruh & Harish,
>
>
> On 10/20/2017 9:15 AM, Ferruh Yigit wrote:
>> On 10/19/2017 3:43 PM, Patil, Harish wrote:
>>> -----Original Message-----
>>> From: Harish Patil <Harish.Patil@cavium.com>
>>> Date: Tuesday, October 17, 2017 at 9:50 PM
>>> To: Thomas Monjalon <thomas@monjalon.net>, Ferruh Yigit
>>> <ferruh.yigit@intel.com>
>>> Cc: "dev@dpdk.org" <dev@dpdk.org>, Jianfeng Tan <jianfeng.tan@intel.com>,
>>> Jingjing Wu <jingjing.wu@intel.com>, "Thotton, Shijith"
>>> <Shijith.Thotton@cavium.com>, Gregory Etelson <gregory@weka.io>, George
>>> Prekas <george.prekas@epfl.ch>, "stable@dpdk.org" <stable@dpdk.org>
>>> Subject: Re: [PATCH] igb_uio: revert open and release operations
>>>>
>>>> -----Original Message-----
>>>> From: Thomas Monjalon <thomas@monjalon.net>
>>>> Date: Tuesday, October 17, 2017 at 1:33 PM
>>>> To: Ferruh Yigit <ferruh.yigit@intel.com>, Harish Patil
>>>> <Harish.Patil@cavium.com>
>>>> Cc: "dev@dpdk.org" <dev@dpdk.org>, Jianfeng Tan <jianfeng.tan@intel.com>,
>>>> Jingjing Wu <jingjing.wu@intel.com>, "Thotton, Shijith"
>>>> <Shijith.Thotton@cavium.com>, Gregory Etelson <gregory@weka.io>, George
>>>> Prekas <george.prekas@epfl.ch>, "stable@dpdk.org" <stable@dpdk.org>
>>>> Subject: Re: [PATCH] igb_uio: revert open and release operations
>>>>
>>>>> 17/10/2017 22:14, Ferruh Yigit:
>>>>>> There were bug reports about terminated application may leave device in
>>>>>> undesired state:
>>>>>> http://dpdk.org/ml/archives/dev/2016-November/049745.html
>>>>>> http://dpdk.org/ml/archives/dev/2016-November/050932.html
>>>>>>
>>>>>> And a proposal to fix:
>>>>>> http://dpdk.org/ml/archives/dev/2016-December/051844.html
>>>>>>
>>>>>> Later another proposal triggered the discussion:
>>>>>> http://dpdk.org/ml/archives/dev/2017-May/066317.html
>>>>>>
>>>>>> Finally a fix patch pushed into v17.08:
>>>>>> Commit: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of
>>>>>> device file")
>>>>>>
>>>>>> Later a regression report sent related to the pushed patch:
>>>>>> http://dpdk.org/ml/archives/dev/2017-September/075236.html
>>>>>>
>>>>>> And a fix for regression integrated into v17.11-rc1:
>>>>>> http://dpdk.org/ml/archives/dev/2017-October/079166.html
>>>>>> Commit: 5f6ff30dc507 ("igb_uio: fix interrupt enablement after FLR in
>>>>>> VM")
>>>>>> Commit: 6b9ed026a870 ("igb_uio: fix build with kernel <= 3.17")
>>>>>>
>>>>>> Even after the fix qede PMD reported to be broken:
>>>>>> http://dpdk.org/ml/archives/dev/2017-October/079359.html
>>>>>>
>>>>>> So this patch reverts original fix and related commits. The related
>>>>>> igb_uio code part turns back to v17.05 base.
>>>>> [...]
>>>>>> ---
>>>>>> It would be nice to solve this issue in LTS release, but being close to
>>>>>> the release and the error report without details makes it hard to work
>>>>>> more on this issue.
>>>>> With this revert, we are back to the original issue.
>>>>> We must really try the proposed solution.
>>>>> Harish, please describe your issue and think how it could be fixed.
>>>>> Jingjing made it work for i40e.
>>>>> I know it is less effort to request a simple revert.
>>>>> Please let's try to fix it once for all.
>>>> Hi Ferruh/Thomas,
>>>> I’m discussing it internally, so please hold on committing this patch till
>>>> I revert back to you.
>>>>
>>>> Thanks.
>>>> [Harish]
>>>> 1) With the introduction of:
>>>> Commit: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of
>>>> device file”)
>>> We saw failures with qede PF & SR-IOV VF initialization in PCI passthru
>>> mode.
>>>
>>>> PF PCI passthru mode initialization failure was resolved by:
>>>> “Commit: 5f6ff30dc507 ("igb_uio: fix interrupt enablement after FLR in
>>>> VM")
>> Thank you for the update.
>>
>>>> SR-IOV VF PCI passthru mode initialization issue is that PCI FLR and
>>>> related device cleanup is not completed by the time VF driver starts
>>>> loading. It results in the mbox command failure sent over the HW channel
>>>> between VF and PF.
>> This seems same reason why i40e added a check and wait loop.
>>
>>>> Even though pci_reset_function() waits for the stipulated amount of time
>>>> per standards, VF FLR takes longer than that and pci_reset_function() &
>>>> igb_uio_open() call returns before FLR completes and VF PMD driver tries
>>>> to load before FLR completes leading to VF PMD initialization failure.
>>>>
>>>>
>>>> We can work around this problem by adding driver delay/retry logic since
>>>> there is no deterministic way of detecting FLR completion. But this is
>>>> going to increase the driver load time.
>>>>
>>>> 2) With the above patch ("igb_uio: issue FLR during open and release of
>>>> device file), FLR is going to be issued unconditionally on all devices
>>>> during igb_uio_open. We think it’s an over kill. FLR is required only for
>>>> previous abnormal app termination. We already handle the abnormal app
>>>> termination by doing necessary cleanup in the driver during load. This
>>>> cleanup is more efficient as it is done only when required. So we feel
>>>> that the drivers/devices needing such cleanup (the two cases listed
>>>> below) should do it conditionally when required rather than
>>>> igb_uio_open() unconditionally performing FLR all the time.
>>>>
>>>> e.g.,
>>> - cdb166963cae ("net/liquidio: add API for VF FLR”)
>> Both 1) and 2) related to the pci_reset during open().
>> But the main functionality we are looking for is the pci_reset in release().
>> So we can remove reset during open() [1].
>>
>> Will disabling pci_reset in open() [2] solve your problems?
>>
>> Jingjing, Jianfeng,
>> What do you think?
>
> If [2] can work for all drivers, I agree with this option.
OK, I will send this as a patch to make it easy to test and discuss.
>
> Thanks,
> Jianfeng
>
>>
>>
>> [1]
>> Perhaps will need to revert or partially revert liquidio patch after this.
>>
>> [2]
>> disable line "pci_reset_function(dev);" in the igbuio_pci_open()
>> http://dpdk.org/browse/dpdk/tree/lib/librte_eal/linuxapp/igb_uio/igb_uio.c#n339
>>
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* [dpdk-stable] [PATCH] igb_uio: remove device reset in open
2017-10-20 16:32 ` Ferruh Yigit
@ 2017-10-20 16:55 ` Ferruh Yigit
2017-10-20 16:57 ` Ferruh Yigit
2017-10-24 21:38 ` [dpdk-stable] " Ferruh Yigit
0 siblings, 2 replies; 33+ messages in thread
From: Ferruh Yigit @ 2017-10-20 16:55 UTC (permalink / raw)
To: Ferruh Yigit
Cc: Thomas Monjalon, dev, stable, Jianfeng Tan, Jingjing Wu,
Shijith Thotton, Gregory Etelson, Harish Patil, George Prekas,
Sergio Gonzalez Monroy
Remove device reset during application start, the reset for application
exit still there.
Reset in open removed because of following comments:
1- Device reset not completed when VF driver loaded, which cause VF PMD
initialization error.
Adding delay can solve the issue but will increase driver load time.
2- Reset will be issues all devices unconditionally, not very efficient
way.
Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device file")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
---
Cc: Jianfeng Tan <jianfeng.tan@intel.com>
Cc: Jingjing Wu <jingjing.wu@intel.com>
Cc: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Cc: Gregory Etelson <gregory@weka.io>
Cc: Harish Patil <harish.patil@cavium.com>
Cc: George Prekas <george.prekas@epfl.ch>
Cc: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
---
lib/librte_eal/linuxapp/igb_uio/igb_uio.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
index f7ef82554..fd320d87d 100644
--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
@@ -336,8 +336,6 @@ igbuio_pci_open(struct uio_info *info, struct inode *inode)
struct pci_dev *dev = udev->pdev;
int err;
- pci_reset_function(dev);
-
/* set bus master, which was cleared by the reset function */
pci_set_master(dev);
--
2.13.6
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [PATCH] igb_uio: remove device reset in open
2017-10-20 16:55 ` [dpdk-stable] [PATCH] igb_uio: remove device reset in open Ferruh Yigit
@ 2017-10-20 16:57 ` Ferruh Yigit
2017-10-20 19:01 ` Gregory Etelson
` (3 more replies)
2017-10-24 21:38 ` [dpdk-stable] " Ferruh Yigit
1 sibling, 4 replies; 33+ messages in thread
From: Ferruh Yigit @ 2017-10-20 16:57 UTC (permalink / raw)
To: Jingjing Wu, Shijith Thotton, Gregory Etelson, Harish Patil
Cc: Thomas Monjalon, dev, stable, Jianfeng Tan, George Prekas,
Sergio Gonzalez Monroy
On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
> Remove device reset during application start, the reset for application
> exit still there.
>
> Reset in open removed because of following comments:
> 1- Device reset not completed when VF driver loaded, which cause VF PMD
> initialization error.
> Adding delay can solve the issue but will increase driver load time.
>
> 2- Reset will be issues all devices unconditionally, not very efficient
> way.
>
> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device file")
> Cc: stable@dpdk.org
>
> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Hi Jingjing, Shijith, Gregory, Harish,
Can you please test this on top of current master (which has already Jingjin's
fix) ?
Thanks,
ferruh
> ---
> Cc: Jianfeng Tan <jianfeng.tan@intel.com>
> Cc: Jingjing Wu <jingjing.wu@intel.com>
> Cc: Shijith Thotton <shijith.thotton@caviumnetworks.com>
> Cc: Gregory Etelson <gregory@weka.io>
> Cc: Harish Patil <harish.patil@cavium.com>
> Cc: George Prekas <george.prekas@epfl.ch>
> Cc: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
> ---
> lib/librte_eal/linuxapp/igb_uio/igb_uio.c | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> index f7ef82554..fd320d87d 100644
> --- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> +++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> @@ -336,8 +336,6 @@ igbuio_pci_open(struct uio_info *info, struct inode *inode)
> struct pci_dev *dev = udev->pdev;
> int err;
>
> - pci_reset_function(dev);
> -
> /* set bus master, which was cleared by the reset function */
> pci_set_master(dev);
>
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [PATCH] igb_uio: remove device reset in open
2017-10-20 16:57 ` Ferruh Yigit
@ 2017-10-20 19:01 ` Gregory Etelson
2017-10-20 22:18 ` Patil, Harish
` (2 subsequent siblings)
3 siblings, 0 replies; 33+ messages in thread
From: Gregory Etelson @ 2017-10-20 19:01 UTC (permalink / raw)
To: Ferruh Yigit
Cc: Jingjing Wu, Shijith Thotton, Harish Patil, Thomas Monjalon, dev,
stable, Jianfeng Tan, George Prekas, Sergio Gonzalez Monroy
On Friday, 20 October 2017 19:57:38 IDT Ferruh Yigit wrote:
> On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
> > Remove device reset during application start, the reset for application
> > exit still there.
> >
> > Reset in open removed because of following comments:
> > 1- Device reset not completed when VF driver loaded, which cause VF PMD
> >
> > initialization error.
> > Adding delay can solve the issue but will increase driver load time.
> >
> > 2- Reset will be issues all devices unconditionally, not very efficient
> >
> > way.
> >
> > Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device
> > file") Cc: stable@dpdk.org
> >
> > Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
>
> Hi Jingjing, Shijith, Gregory, Harish,
>
> Can you please test this on top of current master (which has already
> Jingjin's fix) ?
>
> Thanks,
> ferruh
>
sure.
> > ---
> > Cc: Jianfeng Tan <jianfeng.tan@intel.com>
> > Cc: Jingjing Wu <jingjing.wu@intel.com>
> > Cc: Shijith Thotton <shijith.thotton@caviumnetworks.com>
> > Cc: Gregory Etelson <gregory@weka.io>
> > Cc: Harish Patil <harish.patil@cavium.com>
> > Cc: George Prekas <george.prekas@epfl.ch>
> > Cc: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
> > ---
> >
> > lib/librte_eal/linuxapp/igb_uio/igb_uio.c | 2 --
> > 1 file changed, 2 deletions(-)
> >
> > diff --git a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> > b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c index f7ef82554..fd320d87d
> > 100644
> > --- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> > +++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> > @@ -336,8 +336,6 @@ igbuio_pci_open(struct uio_info *info, struct inode
> > *inode)>
> > struct pci_dev *dev = udev->pdev;
> > int err;
> >
> > - pci_reset_function(dev);
> > -
> >
> > /* set bus master, which was cleared by the reset function */
> > pci_set_master(dev);
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [PATCH] igb_uio: remove device reset in open
2017-10-20 16:57 ` Ferruh Yigit
2017-10-20 19:01 ` Gregory Etelson
@ 2017-10-20 22:18 ` Patil, Harish
2017-10-23 12:28 ` Shijith Thotton
2017-10-25 23:43 ` [dpdk-stable] [dpdk-dev] " Mody, Rasesh
3 siblings, 0 replies; 33+ messages in thread
From: Patil, Harish @ 2017-10-20 22:18 UTC (permalink / raw)
To: Ferruh Yigit, Jingjing Wu, Thotton, Shijith, Gregory Etelson
Cc: Thomas Monjalon, dev, stable, Jianfeng Tan, George Prekas,
Sergio Gonzalez Monroy
-----Original Message-----
From: Ferruh Yigit <ferruh.yigit@intel.com>
Date: Friday, October 20, 2017 at 9:57 AM
To: Jingjing Wu <jingjing.wu@intel.com>, "Thotton, Shijith"
<Shijith.Thotton@cavium.com>, Gregory Etelson <gregory@weka.io>, Harish
Patil <Harish.Patil@cavium.com>
Cc: Thomas Monjalon <thomas@monjalon.net>, "dev@dpdk.org" <dev@dpdk.org>,
"stable@dpdk.org" <stable@dpdk.org>, Jianfeng Tan
<jianfeng.tan@intel.com>, George Prekas <george.prekas@epfl.ch>, Sergio
Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Subject: Re: [PATCH] igb_uio: remove device reset in open
>On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
>> Remove device reset during application start, the reset for application
>> exit still there.
>>
>> Reset in open removed because of following comments:
>> 1- Device reset not completed when VF driver loaded, which cause VF PMD
>> initialization error.
>> Adding delay can solve the issue but will increase driver load time.
>>
>> 2- Reset will be issues all devices unconditionally, not very efficient
>> way.
>>
>> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of
>>device file")
>> Cc: stable@dpdk.org
>>
>> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
>
>Hi Jingjing, Shijith, Gregory, Harish,
>
>Can you please test this on top of current master (which has already
>Jingjin's
>fix) ?
>
>Thanks,
>Ferruh
Ferruh,
Sure, will try and get back to you.
Thanks.
>
>> ---
>> Cc: Jianfeng Tan <jianfeng.tan@intel.com>
>> Cc: Jingjing Wu <jingjing.wu@intel.com>
>> Cc: Shijith Thotton <shijith.thotton@caviumnetworks.com>
>> Cc: Gregory Etelson <gregory@weka.io>
>> Cc: Harish Patil <harish.patil@cavium.com>
>> Cc: George Prekas <george.prekas@epfl.ch>
>> Cc: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
>> ---
>> lib/librte_eal/linuxapp/igb_uio/igb_uio.c | 2 --
>> 1 file changed, 2 deletions(-)
>>
>> diff --git a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
>>b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
>> index f7ef82554..fd320d87d 100644
>> --- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
>> +++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
>> @@ -336,8 +336,6 @@ igbuio_pci_open(struct uio_info *info, struct inode
>>*inode)
>> struct pci_dev *dev = udev->pdev;
>> int err;
>>
>> - pci_reset_function(dev);
>> -
>> /* set bus master, which was cleared by the reset function */
>> pci_set_master(dev);
>>
>>
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [PATCH] igb_uio: remove device reset in open
2017-10-20 16:57 ` Ferruh Yigit
2017-10-20 19:01 ` Gregory Etelson
2017-10-20 22:18 ` Patil, Harish
@ 2017-10-23 12:28 ` Shijith Thotton
2017-10-23 16:36 ` Ferruh Yigit
2017-10-24 2:45 ` Wu, Jingjing
2017-10-25 23:43 ` [dpdk-stable] [dpdk-dev] " Mody, Rasesh
3 siblings, 2 replies; 33+ messages in thread
From: Shijith Thotton @ 2017-10-23 12:28 UTC (permalink / raw)
To: Ferruh Yigit
Cc: Jingjing Wu, Gregory Etelson, Harish Patil, Thomas Monjalon, dev,
stable, Jianfeng Tan, George Prekas, Sergio Gonzalez Monroy
On Fri, Oct 20, 2017 at 09:57:38AM -0700, Ferruh Yigit wrote:
> On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
> > Remove device reset during application start, the reset for application
> > exit still there.
> >
> > Reset in open removed because of following comments:
> > 1- Device reset not completed when VF driver loaded, which cause VF PMD
> > initialization error.
> > Adding delay can solve the issue but will increase driver load time.
> >
> > 2- Reset will be issues all devices unconditionally, not very efficient
> > way.
> >
> > Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device file")
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
>
> Hi Jingjing, Shijith, Gregory, Harish,
>
> Can you please test this on top of current master (which has already Jingjin's
> fix) ?
Hi Ferruh,
Tested for LiquidIO cards and it works.
Thanks,
Shijith
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [PATCH] igb_uio: remove device reset in open
2017-10-23 12:28 ` Shijith Thotton
@ 2017-10-23 16:36 ` Ferruh Yigit
2017-10-23 19:03 ` Shijith Thotton
2017-10-24 2:45 ` Wu, Jingjing
1 sibling, 1 reply; 33+ messages in thread
From: Ferruh Yigit @ 2017-10-23 16:36 UTC (permalink / raw)
To: Shijith Thotton
Cc: Jingjing Wu, Gregory Etelson, Harish Patil, Thomas Monjalon, dev,
stable, Jianfeng Tan, George Prekas, Sergio Gonzalez Monroy
On 10/23/2017 5:28 AM, Shijith Thotton wrote:
> On Fri, Oct 20, 2017 at 09:57:38AM -0700, Ferruh Yigit wrote:
>> On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
>>> Remove device reset during application start, the reset for application
>>> exit still there.
>>>
>>> Reset in open removed because of following comments:
>>> 1- Device reset not completed when VF driver loaded, which cause VF PMD
>>> initialization error.
>>> Adding delay can solve the issue but will increase driver load time.
>>>
>>> 2- Reset will be issues all devices unconditionally, not very efficient
>>> way.
>>>
>>> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device file")
>>> Cc: stable@dpdk.org
>>>
>>> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
>>
>> Hi Jingjing, Shijith, Gregory, Harish,
>>
>> Can you please test this on top of current master (which has already Jingjin's
>> fix) ?
>
> Hi Ferruh,
>
> Tested for LiquidIO cards and it works.
Thanks Shijith,
Is following commit needs to be reverted after pci_reset removed from open():
Commit: 9ed3f38770c6 ("net/liquidio: remove FLR request to PF driver")
Thanks,
ferruh
>
> Thanks,
> Shijith
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [PATCH] igb_uio: remove device reset in open
2017-10-23 16:36 ` Ferruh Yigit
@ 2017-10-23 19:03 ` Shijith Thotton
0 siblings, 0 replies; 33+ messages in thread
From: Shijith Thotton @ 2017-10-23 19:03 UTC (permalink / raw)
To: Ferruh Yigit
Cc: Jingjing Wu, Gregory Etelson, Harish Patil, Thomas Monjalon, dev,
stable, Jianfeng Tan, George Prekas, Sergio Gonzalez Monroy
On Mon, Oct 23, 2017 at 09:36:38AM -0700, Ferruh Yigit wrote:
> On 10/23/2017 5:28 AM, Shijith Thotton wrote:
> > On Fri, Oct 20, 2017 at 09:57:38AM -0700, Ferruh Yigit wrote:
> >> On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
> >>> Remove device reset during application start, the reset for application
> >>> exit still there.
> >>>
> >>> Reset in open removed because of following comments:
> >>> 1- Device reset not completed when VF driver loaded, which cause VF PMD
> >>> initialization error.
> >>> Adding delay can solve the issue but will increase driver load time.
> >>>
> >>> 2- Reset will be issues all devices unconditionally, not very efficient
> >>> way.
> >>>
> >>> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device file")
> >>> Cc: stable@dpdk.org
> >>>
> >>> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
> >>
> >> Hi Jingjing, Shijith, Gregory, Harish,
> >>
> >> Can you please test this on top of current master (which has already Jingjin's
> >> fix) ?
> >
> > Hi Ferruh,
> >
> > Tested for LiquidIO cards and it works.
>
> Thanks Shijith,
>
> Is following commit needs to be reverted after pci_reset removed from open():
>
> Commit: 9ed3f38770c6 ("net/liquidio: remove FLR request to PF driver")
Not required. The commit can stay.
Thanks,
Shijith
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [PATCH] igb_uio: remove device reset in open
2017-10-23 12:28 ` Shijith Thotton
2017-10-23 16:36 ` Ferruh Yigit
@ 2017-10-24 2:45 ` Wu, Jingjing
1 sibling, 0 replies; 33+ messages in thread
From: Wu, Jingjing @ 2017-10-24 2:45 UTC (permalink / raw)
To: Shijith Thotton, Yigit, Ferruh
Cc: Gregory Etelson, Harish Patil, Thomas Monjalon, dev, stable, Tan,
Jianfeng, George Prekas, Gonzalez Monroy, Sergio
> -----Original Message-----
> From: Shijith Thotton [mailto:shijith.thotton@caviumnetworks.com]
> Sent: Monday, October 23, 2017 8:28 PM
> To: Yigit, Ferruh <ferruh.yigit@intel.com>
> Cc: Wu, Jingjing <jingjing.wu@intel.com>; Gregory Etelson <gregory@weka.io>;
> Harish Patil <harish.patil@cavium.com>; Thomas Monjalon
> <thomas@monjalon.net>; dev@dpdk.org; stable@dpdk.org; Tan, Jianfeng
> <jianfeng.tan@intel.com>; George Prekas <george.prekas@epfl.ch>; Gonzalez
> Monroy, Sergio <sergio.gonzalez.monroy@intel.com>
> Subject: Re: [PATCH] igb_uio: remove device reset in open
>
> On Fri, Oct 20, 2017 at 09:57:38AM -0700, Ferruh Yigit wrote:
> > On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
> > > Remove device reset during application start, the reset for
> > > application exit still there.
> > >
> > > Reset in open removed because of following comments:
> > > 1- Device reset not completed when VF driver loaded, which cause VF PMD
> > > initialization error.
> > > Adding delay can solve the issue but will increase driver load time.
> > >
> > > 2- Reset will be issues all devices unconditionally, not very efficient
> > > way.
> > >
> > > Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of
> > > device file")
> > > Cc: stable@dpdk.org
> > >
> > > Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
> >
> > Hi Jingjing, Shijith, Gregory, Harish,
> >
> > Can you please test this on top of current master (which has already
> > Jingjin's
> > fix) ?
>
> Hi Ferruh,
>
> Tested for LiquidIO cards and it works.
>
> Thanks,
> Shijith
Hi, Ferruh
For i40e, it's OK too.
Thanks
Jingjing
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [dpdk-dev] [PATCH] igb_uio: remove device reset in open
2017-10-20 16:57 ` Ferruh Yigit
` (2 preceding siblings ...)
2017-10-23 12:28 ` Shijith Thotton
@ 2017-10-25 23:43 ` Mody, Rasesh
2017-10-26 9:28 ` Tan, Jianfeng
3 siblings, 1 reply; 33+ messages in thread
From: Mody, Rasesh @ 2017-10-25 23:43 UTC (permalink / raw)
To: Ferruh Yigit, Jingjing Wu, Thotton, Shijith, Gregory Etelson,
Patil, Harish
Cc: Thomas Monjalon, dev, stable, Jianfeng Tan, George Prekas,
Sergio Gonzalez Monroy
Hi Ferruh,
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Ferruh Yigit
> Sent: Friday, October 20, 2017 9:58 AM
>
> On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
> > Remove device reset during application start, the reset for
> > application exit still there.
> >
> > Reset in open removed because of following comments:
> > 1- Device reset not completed when VF driver loaded, which cause VF PMD
> > initialization error.
> > Adding delay can solve the issue but will increase driver load time.
> >
> > 2- Reset will be issues all devices unconditionally, not very efficient
> > way.
> >
> > Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of
> > device file")
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
>
> Hi Jingjing, Shijith, Gregory, Harish,
>
> Can you please test this on top of current master (which has already Jingjin's
> fix) ?
The original FLR change during igb_uio open()/release() in DPDK17.08 also impacts BNX2X PMD and it exhibits the issues with bare metal testing.
Now, we tested this change for BNX2X PMD using latest dpdk, which has this fix where FLR is invoked only in the release(). However, we ran into an issue when trying to reload the testpmd application in quick succession. The pci reset, called during the igb_uio release() operation, is taking longer time and adapter is still doing the FLR when we relaunch the application. We see this behavior with bare metal testing.
Thanks!
-Rasesh
>
> Thanks,
> ferruh
>
> > ---
> > Cc: Jianfeng Tan <jianfeng.tan@intel.com>
> > Cc: Jingjing Wu <jingjing.wu@intel.com>
> > Cc: Shijith Thotton <shijith.thotton@caviumnetworks.com>
> > Cc: Gregory Etelson <gregory@weka.io>
> > Cc: Harish Patil <harish.patil@cavium.com>
> > Cc: George Prekas <george.prekas@epfl.ch>
> > Cc: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
> > ---
> > lib/librte_eal/linuxapp/igb_uio/igb_uio.c | 2 --
> > 1 file changed, 2 deletions(-)
> >
> > diff --git a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> > b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> > index f7ef82554..fd320d87d 100644
> > --- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> > +++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> > @@ -336,8 +336,6 @@ igbuio_pci_open(struct uio_info *info, struct inode
> *inode)
> > struct pci_dev *dev = udev->pdev;
> > int err;
> >
> > - pci_reset_function(dev);
> > -
> > /* set bus master, which was cleared by the reset function */
> > pci_set_master(dev);
> >
> >
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [dpdk-dev] [PATCH] igb_uio: remove device reset in open
2017-10-25 23:43 ` [dpdk-stable] [dpdk-dev] " Mody, Rasesh
@ 2017-10-26 9:28 ` Tan, Jianfeng
2017-10-27 0:49 ` Ferruh Yigit
0 siblings, 1 reply; 33+ messages in thread
From: Tan, Jianfeng @ 2017-10-26 9:28 UTC (permalink / raw)
To: Mody, Rasesh, Ferruh Yigit, Jingjing Wu, Thotton, Shijith,
Gregory Etelson, Patil, Harish
Cc: Thomas Monjalon, dev, stable, George Prekas, Sergio Gonzalez Monroy
Hi Rasesh,
On 10/26/2017 7:43 AM, Mody, Rasesh wrote:
> Hi Ferruh,
>
>> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Ferruh Yigit
>> Sent: Friday, October 20, 2017 9:58 AM
>>
>> On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
>>> Remove device reset during application start, the reset for
>>> application exit still there.
>>>
>>> Reset in open removed because of following comments:
>>> 1- Device reset not completed when VF driver loaded, which cause VF PMD
>>> initialization error.
>>> Adding delay can solve the issue but will increase driver load time.
>>>
>>> 2- Reset will be issues all devices unconditionally, not very efficient
>>> way.
>>>
>>> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of
>>> device file")
>>> Cc: stable@dpdk.org
>>>
>>> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
>> Hi Jingjing, Shijith, Gregory, Harish,
>>
>> Can you please test this on top of current master (which has already Jingjin's
>> fix) ?
> The original FLR change during igb_uio open()/release() in DPDK17.08 also impacts BNX2X PMD and it exhibits the issues with bare metal testing.
>
> Now, we tested this change for BNX2X PMD using latest dpdk, which has this fix where FLR is invoked only in the release(). However, we ran into an issue when trying to reload the testpmd application in quick succession. The pci reset, called during the igb_uio release() operation, is taking longer time and adapter is still doing the FLR when we relaunch the application. We see this behavior with bare metal testing.
If we don't reset that device, it will continue working which is a more
serious issue IMO.
How long does it take to reset BTW?
Thanks,
Jianfeng
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [dpdk-dev] [PATCH] igb_uio: remove device reset in open
2017-10-26 9:28 ` Tan, Jianfeng
@ 2017-10-27 0:49 ` Ferruh Yigit
2017-11-01 6:58 ` Mody, Rasesh
0 siblings, 1 reply; 33+ messages in thread
From: Ferruh Yigit @ 2017-10-27 0:49 UTC (permalink / raw)
To: Tan, Jianfeng, Mody, Rasesh, Jingjing Wu, Thotton, Shijith,
Gregory Etelson, Patil, Harish
Cc: Thomas Monjalon, dev, stable, George Prekas, Sergio Gonzalez Monroy
On 10/26/2017 2:28 AM, Tan, Jianfeng wrote:
> Hi Rasesh,
>
>
> On 10/26/2017 7:43 AM, Mody, Rasesh wrote:
>> Hi Ferruh,
>>
>>> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Ferruh Yigit
>>> Sent: Friday, October 20, 2017 9:58 AM
>>>
>>> On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
>>>> Remove device reset during application start, the reset for
>>>> application exit still there.
>>>>
>>>> Reset in open removed because of following comments:
>>>> 1- Device reset not completed when VF driver loaded, which cause VF PMD
>>>> initialization error.
>>>> Adding delay can solve the issue but will increase driver load time.
>>>>
>>>> 2- Reset will be issues all devices unconditionally, not very efficient
>>>> way.
>>>>
>>>> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of
>>>> device file")
>>>> Cc: stable@dpdk.org
>>>>
>>>> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
>>> Hi Jingjing, Shijith, Gregory, Harish,
>>>
>>> Can you please test this on top of current master (which has already Jingjin's
>>> fix) ?
>> The original FLR change during igb_uio open()/release() in DPDK17.08 also impacts BNX2X PMD and it exhibits the issues with bare metal testing.
>>
>> Now, we tested this change for BNX2X PMD using latest dpdk, which has this fix where FLR is invoked only in the release().
Good to hear this fixed the problem.
>> However, we ran into an issue when trying to reload the testpmd application in quick succession. The pci reset, called during the igb_uio release() operation, is taking longer time and adapter is still doing the FLR when we relaunch the application. We see this behavior with bare metal testing.
>
> If we don't reset that device, it will continue working which is a more
> serious issue IMO.
+1
> How long does it take to reset BTW?
I was wondering same thing.
>
> Thanks,
> Jianfeng
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [dpdk-dev] [PATCH] igb_uio: remove device reset in open
2017-10-27 0:49 ` Ferruh Yigit
@ 2017-11-01 6:58 ` Mody, Rasesh
2017-11-01 14:12 ` Stephen Hemminger
0 siblings, 1 reply; 33+ messages in thread
From: Mody, Rasesh @ 2017-11-01 6:58 UTC (permalink / raw)
To: Ferruh Yigit, Tan, Jianfeng, Jingjing Wu, Thotton, Shijith,
Gregory Etelson, Patil, Harish
Cc: Thomas Monjalon, dev, stable, George Prekas, Sergio Gonzalez Monroy
Hi Jianfeng and Ferruh,
> From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
> Sent: Thursday, October 26, 2017 5:50 PM
>
> On 10/26/2017 2:28 AM, Tan, Jianfeng wrote:
> > Hi Rasesh,
> >
> >
> > On 10/26/2017 7:43 AM, Mody, Rasesh wrote:
> >> Hi Ferruh,
> >>
> >>> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Ferruh Yigit
> >>> Sent: Friday, October 20, 2017 9:58 AM
> >>>
> >>> On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
> >>>> Remove device reset during application start, the reset for
> >>>> application exit still there.
> >>>>
> >>>> Reset in open removed because of following comments:
> >>>> 1- Device reset not completed when VF driver loaded, which cause VF
> PMD
> >>>> initialization error.
> >>>> Adding delay can solve the issue but will increase driver load time.
> >>>>
> >>>> 2- Reset will be issues all devices unconditionally, not very efficient
> >>>> way.
> >>>>
> >>>> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of
> >>>> device file")
> >>>> Cc: stable@dpdk.org
> >>>>
> >>>> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
> >>> Hi Jingjing, Shijith, Gregory, Harish,
> >>>
> >>> Can you please test this on top of current master (which has already
> >>> Jingjin's
> >>> fix) ?
> >> The original FLR change during igb_uio open()/release() in DPDK17.08 also
> impacts BNX2X PMD and it exhibits the issues with bare metal testing.
> >>
> >> Now, we tested this change for BNX2X PMD using latest dpdk, which has
> this fix where FLR is invoked only in the release().
>
> Good to hear this fixed the problem.
Yes, it fixed the issue caused by pci reset during application start.
>
> >> However, we ran into an issue when trying to reload the testpmd
> application in quick succession. The pci reset, called during the igb_uio
> release() operation, is taking longer time and adapter is still doing the FLR
> when we relaunch the application. We see this behavior with bare metal
> testing.
> >
> > If we don't reset that device, it will continue working which is a
> > more serious issue IMO.
>
> +1
I think, it would better for the individual PMDs to take care of the reset during the application exit.
> > How long does it take to reset BTW?
>
> I was wondering same thing.
A five minutes delay was introduced for the reload of the application, however, we continue to see the issue with FLR during the pci release() operation.
Thanks!
-Rasesh
>
> >
> > Thanks,
> > Jianfeng
> >
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [dpdk-dev] [PATCH] igb_uio: remove device reset in open
2017-11-01 6:58 ` Mody, Rasesh
@ 2017-11-01 14:12 ` Stephen Hemminger
2017-11-02 8:03 ` Mody, Rasesh
0 siblings, 1 reply; 33+ messages in thread
From: Stephen Hemminger @ 2017-11-01 14:12 UTC (permalink / raw)
To: Mody, Rasesh
Cc: Ferruh Yigit, Tan, Jianfeng, Jingjing Wu, Thotton, Shijith,
Gregory Etelson, Patil, Harish, Thomas Monjalon, dev, stable,
George Prekas, Sergio Gonzalez Monroy
On Wed, 1 Nov 2017 06:58:53 +0000
"Mody, Rasesh" <Rasesh.Mody@cavium.com> wrote:
> Hi Jianfeng and Ferruh,
>
> > From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
> > Sent: Thursday, October 26, 2017 5:50 PM
> >
> > On 10/26/2017 2:28 AM, Tan, Jianfeng wrote:
> > > Hi Rasesh,
> > >
> > >
> > > On 10/26/2017 7:43 AM, Mody, Rasesh wrote:
> > >> Hi Ferruh,
> > >>
> > >>> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Ferruh Yigit
> > >>> Sent: Friday, October 20, 2017 9:58 AM
> > >>>
> > >>> On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
> > >>>> Remove device reset during application start, the reset for
> > >>>> application exit still there.
> > >>>>
> > >>>> Reset in open removed because of following comments:
> > >>>> 1- Device reset not completed when VF driver loaded, which cause VF
> > PMD
> > >>>> initialization error.
> > >>>> Adding delay can solve the issue but will increase driver load time.
> > >>>>
> > >>>> 2- Reset will be issues all devices unconditionally, not very efficient
> > >>>> way.
> > >>>>
> > >>>> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of
> > >>>> device file")
> > >>>> Cc: stable@dpdk.org
> > >>>>
> > >>>> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
> > >>> Hi Jingjing, Shijith, Gregory, Harish,
> > >>>
> > >>> Can you please test this on top of current master (which has already
> > >>> Jingjin's
> > >>> fix) ?
> > >> The original FLR change during igb_uio open()/release() in DPDK17.08 also
> > impacts BNX2X PMD and it exhibits the issues with bare metal testing.
> > >>
> > >> Now, we tested this change for BNX2X PMD using latest dpdk, which has
> > this fix where FLR is invoked only in the release().
> >
> > Good to hear this fixed the problem.
>
> Yes, it fixed the issue caused by pci reset during application start.
>
> >
> > >> However, we ran into an issue when trying to reload the testpmd
> > application in quick succession. The pci reset, called during the igb_uio
> > release() operation, is taking longer time and adapter is still doing the FLR
> > when we relaunch the application. We see this behavior with bare metal
> > testing.
> > >
> > > If we don't reset that device, it will continue working which is a
> > > more serious issue IMO.
> >
> > +1
>
> I think, it would better for the individual PMDs to take care of the reset during the application exit.
That will never be possible. Poll Mode Drivers are userspace entities and part of the application. If application crashes, there is no way for PMD to do cleanup, it must
be handled by kernel.
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [dpdk-dev] [PATCH] igb_uio: remove device reset in open
2017-11-01 14:12 ` Stephen Hemminger
@ 2017-11-02 8:03 ` Mody, Rasesh
2017-11-02 8:55 ` Ferruh Yigit
0 siblings, 1 reply; 33+ messages in thread
From: Mody, Rasesh @ 2017-11-02 8:03 UTC (permalink / raw)
To: Stephen Hemminger
Cc: Ferruh Yigit, Tan, Jianfeng, Jingjing Wu, Thotton, Shijith,
Gregory Etelson, Patil, Harish, Thomas Monjalon, dev, stable,
George Prekas, Sergio Gonzalez Monroy
> From: Stephen Hemminger [mailto:stephen@networkplumber.org]
> Sent: Wednesday, November 01, 2017 7:12 AM
>
> On Wed, 1 Nov 2017 06:58:53 +0000
> "Mody, Rasesh" <Rasesh.Mody@cavium.com> wrote:
>
> > Hi Jianfeng and Ferruh,
> >
> > > From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
> > > Sent: Thursday, October 26, 2017 5:50 PM
> > >
> > > On 10/26/2017 2:28 AM, Tan, Jianfeng wrote:
> > > > Hi Rasesh,
> > > >
> > > >
> > > > On 10/26/2017 7:43 AM, Mody, Rasesh wrote:
> > > >> Hi Ferruh,
> > > >>
> > > >>> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Ferruh
> > > >>> Yigit
> > > >>> Sent: Friday, October 20, 2017 9:58 AM
> > > >>>
> > > >>> On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
> > > >>>> Remove device reset during application start, the reset for
> > > >>>> application exit still there.
> > > >>>>
> > > >>>> Reset in open removed because of following comments:
> > > >>>> 1- Device reset not completed when VF driver loaded, which
> > > >>>> cause VF
> > > PMD
> > > >>>> initialization error.
> > > >>>> Adding delay can solve the issue but will increase driver load time.
> > > >>>>
> > > >>>> 2- Reset will be issues all devices unconditionally, not very efficient
> > > >>>> way.
> > > >>>>
> > > >>>> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and
> > > >>>> release of device file")
> > > >>>> Cc: stable@dpdk.org
> > > >>>>
> > > >>>> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
> > > >>> Hi Jingjing, Shijith, Gregory, Harish,
> > > >>>
> > > >>> Can you please test this on top of current master (which has
> > > >>> already Jingjin's
> > > >>> fix) ?
> > > >> The original FLR change during igb_uio open()/release() in
> > > >> DPDK17.08 also
> > > impacts BNX2X PMD and it exhibits the issues with bare metal testing.
> > > >>
> > > >> Now, we tested this change for BNX2X PMD using latest dpdk, which
> > > >> has
> > > this fix where FLR is invoked only in the release().
> > >
> > > Good to hear this fixed the problem.
> >
> > Yes, it fixed the issue caused by pci reset during application start.
> >
> > >
> > > >> However, we ran into an issue when trying to reload the testpmd
> > > application in quick succession. The pci reset, called during the
> > > igb_uio
> > > release() operation, is taking longer time and adapter is still
> > > doing the FLR when we relaunch the application. We see this behavior
> > > with bare metal testing.
> > > >
> > > > If we don't reset that device, it will continue working which is a
> > > > more serious issue IMO.
> > >
> > > +1
> >
> > I think, it would better for the individual PMDs to take care of the reset
> during the application exit.
>
> That will never be possible. Poll Mode Drivers are userspace entities and part
> of the application. If application crashes, there is no way for PMD to do
> cleanup, it must be handled by kernel.
The pci reset in release is breaking the BNX2X PMD. Could we revert this reset and get it included with a solution that works for all in the next release?
Thanks!
-Rasesh
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [dpdk-dev] [PATCH] igb_uio: remove device reset in open
2017-11-02 8:03 ` Mody, Rasesh
@ 2017-11-02 8:55 ` Ferruh Yigit
2017-11-02 17:34 ` Mody, Rasesh
0 siblings, 1 reply; 33+ messages in thread
From: Ferruh Yigit @ 2017-11-02 8:55 UTC (permalink / raw)
To: Mody, Rasesh, Stephen Hemminger
Cc: Tan, Jianfeng, Jingjing Wu, Thotton, Shijith, Gregory Etelson,
Patil, Harish, Thomas Monjalon, dev, stable, George Prekas,
Sergio Gonzalez Monroy
On 11/2/2017 1:03 AM, Mody, Rasesh wrote:
>> From: Stephen Hemminger [mailto:stephen@networkplumber.org]
>> Sent: Wednesday, November 01, 2017 7:12 AM
>>
>> On Wed, 1 Nov 2017 06:58:53 +0000
>> "Mody, Rasesh" <Rasesh.Mody@cavium.com> wrote:
>>
>>> Hi Jianfeng and Ferruh,
>>>
>>>> From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
>>>> Sent: Thursday, October 26, 2017 5:50 PM
>>>>
>>>> On 10/26/2017 2:28 AM, Tan, Jianfeng wrote:
>>>>> Hi Rasesh,
>>>>>
>>>>>
>>>>> On 10/26/2017 7:43 AM, Mody, Rasesh wrote:
>>>>>> Hi Ferruh,
>>>>>>
>>>>>>> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Ferruh
>>>>>>> Yigit
>>>>>>> Sent: Friday, October 20, 2017 9:58 AM
>>>>>>>
>>>>>>> On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
>>>>>>>> Remove device reset during application start, the reset for
>>>>>>>> application exit still there.
>>>>>>>>
>>>>>>>> Reset in open removed because of following comments:
>>>>>>>> 1- Device reset not completed when VF driver loaded, which
>>>>>>>> cause VF
>>>> PMD
>>>>>>>> initialization error.
>>>>>>>> Adding delay can solve the issue but will increase driver load time.
>>>>>>>>
>>>>>>>> 2- Reset will be issues all devices unconditionally, not very efficient
>>>>>>>> way.
>>>>>>>>
>>>>>>>> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and
>>>>>>>> release of device file")
>>>>>>>> Cc: stable@dpdk.org
>>>>>>>>
>>>>>>>> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
>>>>>>> Hi Jingjing, Shijith, Gregory, Harish,
>>>>>>>
>>>>>>> Can you please test this on top of current master (which has
>>>>>>> already Jingjin's
>>>>>>> fix) ?
>>>>>> The original FLR change during igb_uio open()/release() in
>>>>>> DPDK17.08 also
>>>> impacts BNX2X PMD and it exhibits the issues with bare metal testing.
>>>>>>
>>>>>> Now, we tested this change for BNX2X PMD using latest dpdk, which
>>>>>> has
>>>> this fix where FLR is invoked only in the release().
>>>>
>>>> Good to hear this fixed the problem.
>>>
>>> Yes, it fixed the issue caused by pci reset during application start.
>>>
>>>>
>>>>>> However, we ran into an issue when trying to reload the testpmd
>>>> application in quick succession. The pci reset, called during the
>>>> igb_uio
>>>> release() operation, is taking longer time and adapter is still
>>>> doing the FLR when we relaunch the application. We see this behavior
>>>> with bare metal testing.
>>>>>
>>>>> If we don't reset that device, it will continue working which is a
>>>>> more serious issue IMO.
>>>>
>>>> +1
>>>
>>> I think, it would better for the individual PMDs to take care of the reset
>> during the application exit.
>>
>> That will never be possible. Poll Mode Drivers are userspace entities and part
>> of the application. If application crashes, there is no way for PMD to do
>> cleanup, it must be handled by kernel.
>
> The pci reset in release is breaking the BNX2X PMD. Could we revert this reset and get it included with a solution that works for all in the next release?
Hi Rasesh,
I am not sure if there is more to do for solution for next releases, and related
to your case, indeed I wasn't expecting a device reset will take more than five
minutes...
Would you be OK to control the reset via a compile time config option, which is
enabled by default. So you will need to disable it to prevent the reset?
>
> Thanks!
> -Rasesh
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [dpdk-dev] [PATCH] igb_uio: remove device reset in open
2017-11-02 8:55 ` Ferruh Yigit
@ 2017-11-02 17:34 ` Mody, Rasesh
2017-11-02 18:09 ` Ferruh Yigit
0 siblings, 1 reply; 33+ messages in thread
From: Mody, Rasesh @ 2017-11-02 17:34 UTC (permalink / raw)
To: Ferruh Yigit, Stephen Hemminger
Cc: Tan, Jianfeng, Jingjing Wu, Thotton, Shijith, Gregory Etelson,
Patil, Harish, Thomas Monjalon, dev, stable, George Prekas,
Sergio Gonzalez Monroy
> From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
> Sent: Thursday, November 02, 2017 1:55 AM
>
> On 11/2/2017 1:03 AM, Mody, Rasesh wrote:
> >> From: Stephen Hemminger [mailto:stephen@networkplumber.org]
> >> Sent: Wednesday, November 01, 2017 7:12 AM
> >>
> >> On Wed, 1 Nov 2017 06:58:53 +0000
> >> "Mody, Rasesh" <Rasesh.Mody@cavium.com> wrote:
> >>
> >>> Hi Jianfeng and Ferruh,
> >>>
> >>>> From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
> >>>> Sent: Thursday, October 26, 2017 5:50 PM
> >>>>
> >>>> On 10/26/2017 2:28 AM, Tan, Jianfeng wrote:
> >>>>> Hi Rasesh,
> >>>>>
> >>>>>
> >>>>> On 10/26/2017 7:43 AM, Mody, Rasesh wrote:
> >>>>>> Hi Ferruh,
> >>>>>>
> >>>>>>> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Ferruh
> >>>>>>> Yigit
> >>>>>>> Sent: Friday, October 20, 2017 9:58 AM
> >>>>>>>
> >>>>>>> On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
> >>>>>>>> Remove device reset during application start, the reset for
> >>>>>>>> application exit still there.
> >>>>>>>>
> >>>>>>>> Reset in open removed because of following comments:
> >>>>>>>> 1- Device reset not completed when VF driver loaded, which
> >>>>>>>> cause VF
> >>>> PMD
> >>>>>>>> initialization error.
> >>>>>>>> Adding delay can solve the issue but will increase driver load
> time.
> >>>>>>>>
> >>>>>>>> 2- Reset will be issues all devices unconditionally, not very
> efficient
> >>>>>>>> way.
> >>>>>>>>
> >>>>>>>> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and
> >>>>>>>> release of device file")
> >>>>>>>> Cc: stable@dpdk.org
> >>>>>>>>
> >>>>>>>> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
> >>>>>>> Hi Jingjing, Shijith, Gregory, Harish,
> >>>>>>>
> >>>>>>> Can you please test this on top of current master (which has
> >>>>>>> already Jingjin's
> >>>>>>> fix) ?
> >>>>>> The original FLR change during igb_uio open()/release() in
> >>>>>> DPDK17.08 also
> >>>> impacts BNX2X PMD and it exhibits the issues with bare metal testing.
> >>>>>>
> >>>>>> Now, we tested this change for BNX2X PMD using latest dpdk, which
> >>>>>> has
> >>>> this fix where FLR is invoked only in the release().
> >>>>
> >>>> Good to hear this fixed the problem.
> >>>
> >>> Yes, it fixed the issue caused by pci reset during application start.
> >>>
> >>>>
> >>>>>> However, we ran into an issue when trying to reload the testpmd
> >>>> application in quick succession. The pci reset, called during the
> >>>> igb_uio
> >>>> release() operation, is taking longer time and adapter is still
> >>>> doing the FLR when we relaunch the application. We see this
> >>>> behavior with bare metal testing.
> >>>>>
> >>>>> If we don't reset that device, it will continue working which is a
> >>>>> more serious issue IMO.
> >>>>
> >>>> +1
> >>>
> >>> I think, it would better for the individual PMDs to take care of the
> >>> reset
> >> during the application exit.
> >>
> >> That will never be possible. Poll Mode Drivers are userspace entities
> >> and part of the application. If application crashes, there is no way
> >> for PMD to do cleanup, it must be handled by kernel.
> >
> > The pci reset in release is breaking the BNX2X PMD. Could we revert this
> reset and get it included with a solution that works for all in the next release?
>
> Hi Rasesh,
>
> I am not sure if there is more to do for solution for next releases, and related
> to your case, indeed I wasn't expecting a device reset will take more than
> five minutes...
>
> Would you be OK to control the reset via a compile time config option, which
> is enabled by default. So you will need to disable it to prevent the reset?
Hi Ferruh,
As I understand, we will have a compile time config option, enabled by default, to guard the pci_reset_function() in the igbuio_pci_release(). We will disable this config option to prevent the reset when using BNX2X.
The controlled reset should work for us.
Thanks!
-Rasesh
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [dpdk-dev] [PATCH] igb_uio: remove device reset in open
2017-11-02 17:34 ` Mody, Rasesh
@ 2017-11-02 18:09 ` Ferruh Yigit
2017-11-02 18:45 ` Mody, Rasesh
0 siblings, 1 reply; 33+ messages in thread
From: Ferruh Yigit @ 2017-11-02 18:09 UTC (permalink / raw)
To: Mody, Rasesh, Stephen Hemminger
Cc: Tan, Jianfeng, Jingjing Wu, Thotton, Shijith, Gregory Etelson,
Patil, Harish, Thomas Monjalon, dev, stable, George Prekas,
Sergio Gonzalez Monroy
On 11/2/2017 10:34 AM, Mody, Rasesh wrote:
>> From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
>> Sent: Thursday, November 02, 2017 1:55 AM
>>
>> On 11/2/2017 1:03 AM, Mody, Rasesh wrote:
>>>> From: Stephen Hemminger [mailto:stephen@networkplumber.org]
>>>> Sent: Wednesday, November 01, 2017 7:12 AM
>>>>
>>>> On Wed, 1 Nov 2017 06:58:53 +0000
>>>> "Mody, Rasesh" <Rasesh.Mody@cavium.com> wrote:
>>>>
>>>>> Hi Jianfeng and Ferruh,
>>>>>
>>>>>> From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
>>>>>> Sent: Thursday, October 26, 2017 5:50 PM
>>>>>>
>>>>>> On 10/26/2017 2:28 AM, Tan, Jianfeng wrote:
>>>>>>> Hi Rasesh,
>>>>>>>
>>>>>>>
>>>>>>> On 10/26/2017 7:43 AM, Mody, Rasesh wrote:
>>>>>>>> Hi Ferruh,
>>>>>>>>
>>>>>>>>> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Ferruh
>>>>>>>>> Yigit
>>>>>>>>> Sent: Friday, October 20, 2017 9:58 AM
>>>>>>>>>
>>>>>>>>> On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
>>>>>>>>>> Remove device reset during application start, the reset for
>>>>>>>>>> application exit still there.
>>>>>>>>>>
>>>>>>>>>> Reset in open removed because of following comments:
>>>>>>>>>> 1- Device reset not completed when VF driver loaded, which
>>>>>>>>>> cause VF
>>>>>> PMD
>>>>>>>>>> initialization error.
>>>>>>>>>> Adding delay can solve the issue but will increase driver load
>> time.
>>>>>>>>>>
>>>>>>>>>> 2- Reset will be issues all devices unconditionally, not very
>> efficient
>>>>>>>>>> way.
>>>>>>>>>>
>>>>>>>>>> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and
>>>>>>>>>> release of device file")
>>>>>>>>>> Cc: stable@dpdk.org
>>>>>>>>>>
>>>>>>>>>> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
>>>>>>>>> Hi Jingjing, Shijith, Gregory, Harish,
>>>>>>>>>
>>>>>>>>> Can you please test this on top of current master (which has
>>>>>>>>> already Jingjin's
>>>>>>>>> fix) ?
>>>>>>>> The original FLR change during igb_uio open()/release() in
>>>>>>>> DPDK17.08 also
>>>>>> impacts BNX2X PMD and it exhibits the issues with bare metal testing.
>>>>>>>>
>>>>>>>> Now, we tested this change for BNX2X PMD using latest dpdk, which
>>>>>>>> has
>>>>>> this fix where FLR is invoked only in the release().
>>>>>>
>>>>>> Good to hear this fixed the problem.
>>>>>
>>>>> Yes, it fixed the issue caused by pci reset during application start.
>>>>>
>>>>>>
>>>>>>>> However, we ran into an issue when trying to reload the testpmd
>>>>>> application in quick succession. The pci reset, called during the
>>>>>> igb_uio
>>>>>> release() operation, is taking longer time and adapter is still
>>>>>> doing the FLR when we relaunch the application. We see this
>>>>>> behavior with bare metal testing.
>>>>>>>
>>>>>>> If we don't reset that device, it will continue working which is a
>>>>>>> more serious issue IMO.
>>>>>>
>>>>>> +1
>>>>>
>>>>> I think, it would better for the individual PMDs to take care of the
>>>>> reset
>>>> during the application exit.
>>>>
>>>> That will never be possible. Poll Mode Drivers are userspace entities
>>>> and part of the application. If application crashes, there is no way
>>>> for PMD to do cleanup, it must be handled by kernel.
>>>
>>> The pci reset in release is breaking the BNX2X PMD. Could we revert this
>> reset and get it included with a solution that works for all in the next release?
>>
>> Hi Rasesh,
>>
>> I am not sure if there is more to do for solution for next releases, and related
>> to your case, indeed I wasn't expecting a device reset will take more than
>> five minutes...
>>
>> Would you be OK to control the reset via a compile time config option, which
>> is enabled by default. So you will need to disable it to prevent the reset?
>
> Hi Ferruh,
>
> As I understand, we will have a compile time config option, enabled by default, to guard the pci_reset_function() in the igbuio_pci_release(). We will disable this config option to prevent the reset when using BNX2X.
Yep, this is the idea.
> The controlled reset should work for us.
If there is no objection, I can send a patch for this.
>
> Thanks!
> -Rasesh
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [dpdk-dev] [PATCH] igb_uio: remove device reset in open
2017-11-02 18:09 ` Ferruh Yigit
@ 2017-11-02 18:45 ` Mody, Rasesh
2017-11-03 0:31 ` Ferruh Yigit
0 siblings, 1 reply; 33+ messages in thread
From: Mody, Rasesh @ 2017-11-02 18:45 UTC (permalink / raw)
To: Ferruh Yigit, Stephen Hemminger
Cc: Tan, Jianfeng, Jingjing Wu, Thotton, Shijith, Gregory Etelson,
Patil, Harish, Thomas Monjalon, dev, stable, George Prekas,
Sergio Gonzalez Monroy
> From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
> Sent: Thursday, November 02, 2017 11:10 AM
>
> On 11/2/2017 10:34 AM, Mody, Rasesh wrote:
> >> From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
> >> Sent: Thursday, November 02, 2017 1:55 AM
> >>
> >> On 11/2/2017 1:03 AM, Mody, Rasesh wrote:
> >>>> From: Stephen Hemminger [mailto:stephen@networkplumber.org]
> >>>> Sent: Wednesday, November 01, 2017 7:12 AM
> >>>>
> >>>> On Wed, 1 Nov 2017 06:58:53 +0000
> >>>> "Mody, Rasesh" <Rasesh.Mody@cavium.com> wrote:
> >>>>
> >>>>> Hi Jianfeng and Ferruh,
> >>>>>
> >>>>>> From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
> >>>>>> Sent: Thursday, October 26, 2017 5:50 PM
> >>>>>>
> >>>>>> On 10/26/2017 2:28 AM, Tan, Jianfeng wrote:
> >>>>>>> Hi Rasesh,
> >>>>>>>
> >>>>>>>
> >>>>>>> On 10/26/2017 7:43 AM, Mody, Rasesh wrote:
> >>>>>>>> Hi Ferruh,
> >>>>>>>>
> >>>>>>>>> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Ferruh
> >>>>>>>>> Yigit
> >>>>>>>>> Sent: Friday, October 20, 2017 9:58 AM
> >>>>>>>>>
> >>>>>>>>> On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
> >>>>>>>>>> Remove device reset during application start, the reset for
> >>>>>>>>>> application exit still there.
> >>>>>>>>>>
> >>>>>>>>>> Reset in open removed because of following comments:
> >>>>>>>>>> 1- Device reset not completed when VF driver loaded, which
> >>>>>>>>>> cause VF
> >>>>>> PMD
> >>>>>>>>>> initialization error.
> >>>>>>>>>> Adding delay can solve the issue but will increase driver
> >>>>>>>>>> load
> >> time.
> >>>>>>>>>>
> >>>>>>>>>> 2- Reset will be issues all devices unconditionally, not very
> >> efficient
> >>>>>>>>>> way.
> >>>>>>>>>>
> >>>>>>>>>> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and
> >>>>>>>>>> release of device file")
> >>>>>>>>>> Cc: stable@dpdk.org
> >>>>>>>>>>
> >>>>>>>>>> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
> >>>>>>>>> Hi Jingjing, Shijith, Gregory, Harish,
> >>>>>>>>>
> >>>>>>>>> Can you please test this on top of current master (which has
> >>>>>>>>> already Jingjin's
> >>>>>>>>> fix) ?
> >>>>>>>> The original FLR change during igb_uio open()/release() in
> >>>>>>>> DPDK17.08 also
> >>>>>> impacts BNX2X PMD and it exhibits the issues with bare metal
> testing.
> >>>>>>>>
> >>>>>>>> Now, we tested this change for BNX2X PMD using latest dpdk,
> >>>>>>>> which has
> >>>>>> this fix where FLR is invoked only in the release().
> >>>>>>
> >>>>>> Good to hear this fixed the problem.
> >>>>>
> >>>>> Yes, it fixed the issue caused by pci reset during application start.
> >>>>>
> >>>>>>
> >>>>>>>> However, we ran into an issue when trying to reload the testpmd
> >>>>>> application in quick succession. The pci reset, called during the
> >>>>>> igb_uio
> >>>>>> release() operation, is taking longer time and adapter is still
> >>>>>> doing the FLR when we relaunch the application. We see this
> >>>>>> behavior with bare metal testing.
> >>>>>>>
> >>>>>>> If we don't reset that device, it will continue working which is
> >>>>>>> a more serious issue IMO.
> >>>>>>
> >>>>>> +1
> >>>>>
> >>>>> I think, it would better for the individual PMDs to take care of
> >>>>> the reset
> >>>> during the application exit.
> >>>>
> >>>> That will never be possible. Poll Mode Drivers are userspace
> >>>> entities and part of the application. If application crashes, there
> >>>> is no way for PMD to do cleanup, it must be handled by kernel.
> >>>
> >>> The pci reset in release is breaking the BNX2X PMD. Could we revert
> >>> this
> >> reset and get it included with a solution that works for all in the next
> release?
> >>
> >> Hi Rasesh,
> >>
> >> I am not sure if there is more to do for solution for next releases,
> >> and related to your case, indeed I wasn't expecting a device reset
> >> will take more than five minutes...
> >>
> >> Would you be OK to control the reset via a compile time config
> >> option, which is enabled by default. So you will need to disable it to
> prevent the reset?
> >
> > Hi Ferruh,
> >
> > As I understand, we will have a compile time config option, enabled by
> default, to guard the pci_reset_function() in the igbuio_pci_release(). We
> will disable this config option to prevent the reset when using BNX2X.
>
> Yep, this is the idea.
>
> > The controlled reset should work for us.
>
> If there is no objection, I can send a patch for this.
We are ok as we have at least some way to disable the reset, please send a patch.
Thanks!
-Rasesh
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [dpdk-dev] [PATCH] igb_uio: remove device reset in open
2017-11-02 18:45 ` Mody, Rasesh
@ 2017-11-03 0:31 ` Ferruh Yigit
2017-11-03 19:18 ` Mody, Rasesh
0 siblings, 1 reply; 33+ messages in thread
From: Ferruh Yigit @ 2017-11-03 0:31 UTC (permalink / raw)
To: Mody, Rasesh, Stephen Hemminger
Cc: Tan, Jianfeng, Jingjing Wu, Thotton, Shijith, Gregory Etelson,
Patil, Harish, Thomas Monjalon, dev, stable, George Prekas,
Sergio Gonzalez Monroy
On 11/2/2017 11:45 AM, Mody, Rasesh wrote:
>> From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
>> Sent: Thursday, November 02, 2017 11:10 AM
>>
>> On 11/2/2017 10:34 AM, Mody, Rasesh wrote:
>>>> From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
>>>> Sent: Thursday, November 02, 2017 1:55 AM
>>>>
>>>> On 11/2/2017 1:03 AM, Mody, Rasesh wrote:
>>>>>> From: Stephen Hemminger [mailto:stephen@networkplumber.org]
>>>>>> Sent: Wednesday, November 01, 2017 7:12 AM
>>>>>>
>>>>>> On Wed, 1 Nov 2017 06:58:53 +0000
>>>>>> "Mody, Rasesh" <Rasesh.Mody@cavium.com> wrote:
>>>>>>
>>>>>>> Hi Jianfeng and Ferruh,
>>>>>>>
>>>>>>>> From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
>>>>>>>> Sent: Thursday, October 26, 2017 5:50 PM
>>>>>>>>
>>>>>>>> On 10/26/2017 2:28 AM, Tan, Jianfeng wrote:
>>>>>>>>> Hi Rasesh,
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 10/26/2017 7:43 AM, Mody, Rasesh wrote:
>>>>>>>>>> Hi Ferruh,
>>>>>>>>>>
>>>>>>>>>>> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Ferruh
>>>>>>>>>>> Yigit
>>>>>>>>>>> Sent: Friday, October 20, 2017 9:58 AM
>>>>>>>>>>>
>>>>>>>>>>> On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
>>>>>>>>>>>> Remove device reset during application start, the reset for
>>>>>>>>>>>> application exit still there.
>>>>>>>>>>>>
>>>>>>>>>>>> Reset in open removed because of following comments:
>>>>>>>>>>>> 1- Device reset not completed when VF driver loaded, which
>>>>>>>>>>>> cause VF
>>>>>>>> PMD
>>>>>>>>>>>> initialization error.
>>>>>>>>>>>> Adding delay can solve the issue but will increase driver
>>>>>>>>>>>> load
>>>> time.
>>>>>>>>>>>>
>>>>>>>>>>>> 2- Reset will be issues all devices unconditionally, not very
>>>> efficient
>>>>>>>>>>>> way.
>>>>>>>>>>>>
>>>>>>>>>>>> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and
>>>>>>>>>>>> release of device file")
>>>>>>>>>>>> Cc: stable@dpdk.org
>>>>>>>>>>>>
>>>>>>>>>>>> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
>>>>>>>>>>> Hi Jingjing, Shijith, Gregory, Harish,
>>>>>>>>>>>
>>>>>>>>>>> Can you please test this on top of current master (which has
>>>>>>>>>>> already Jingjin's
>>>>>>>>>>> fix) ?
>>>>>>>>>> The original FLR change during igb_uio open()/release() in
>>>>>>>>>> DPDK17.08 also
>>>>>>>> impacts BNX2X PMD and it exhibits the issues with bare metal
>> testing.
>>>>>>>>>>
>>>>>>>>>> Now, we tested this change for BNX2X PMD using latest dpdk,
>>>>>>>>>> which has
>>>>>>>> this fix where FLR is invoked only in the release().
>>>>>>>>
>>>>>>>> Good to hear this fixed the problem.
>>>>>>>
>>>>>>> Yes, it fixed the issue caused by pci reset during application start.
>>>>>>>
>>>>>>>>
>>>>>>>>>> However, we ran into an issue when trying to reload the testpmd
>>>>>>>> application in quick succession. The pci reset, called during the
>>>>>>>> igb_uio
>>>>>>>> release() operation, is taking longer time and adapter is still
>>>>>>>> doing the FLR when we relaunch the application. We see this
>>>>>>>> behavior with bare metal testing.
>>>>>>>>>
>>>>>>>>> If we don't reset that device, it will continue working which is
>>>>>>>>> a more serious issue IMO.
>>>>>>>>
>>>>>>>> +1
>>>>>>>
>>>>>>> I think, it would better for the individual PMDs to take care of
>>>>>>> the reset
>>>>>> during the application exit.
>>>>>>
>>>>>> That will never be possible. Poll Mode Drivers are userspace
>>>>>> entities and part of the application. If application crashes, there
>>>>>> is no way for PMD to do cleanup, it must be handled by kernel.
>>>>>
>>>>> The pci reset in release is breaking the BNX2X PMD. Could we revert
>>>>> this
>>>> reset and get it included with a solution that works for all in the next
>> release?
>>>>
>>>> Hi Rasesh,
>>>>
>>>> I am not sure if there is more to do for solution for next releases,
>>>> and related to your case, indeed I wasn't expecting a device reset
>>>> will take more than five minutes...
>>>>
>>>> Would you be OK to control the reset via a compile time config
>>>> option, which is enabled by default. So you will need to disable it to
>> prevent the reset?
>>>
>>> Hi Ferruh,
>>>
>>> As I understand, we will have a compile time config option, enabled by
>> default, to guard the pci_reset_function() in the igbuio_pci_release(). We
>> will disable this config option to prevent the reset when using BNX2X.
>>
>> Yep, this is the idea.
>>
>>> The controlled reset should work for us.
>>
>> If there is no objection, I can send a patch for this.
>
> We are ok as we have at least some way to disable the reset, please send a patch.
Sent http://dpdk.org/dev/patchwork/patch/31143/, can you please test?
>
> Thanks!
> -Rasesh
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [dpdk-dev] [PATCH] igb_uio: remove device reset in open
2017-11-03 0:31 ` Ferruh Yigit
@ 2017-11-03 19:18 ` Mody, Rasesh
0 siblings, 0 replies; 33+ messages in thread
From: Mody, Rasesh @ 2017-11-03 19:18 UTC (permalink / raw)
To: Ferruh Yigit, Stephen Hemminger
Cc: Tan, Jianfeng, Jingjing Wu, Thotton, Shijith, Gregory Etelson,
Patil, Harish, Thomas Monjalon, dev, stable, George Prekas,
Sergio Gonzalez Monroy
> From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
> Sent: Thursday, November 02, 2017 5:32 PM
>
> On 11/2/2017 11:45 AM, Mody, Rasesh wrote:
> >> From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
> >> Sent: Thursday, November 02, 2017 11:10 AM
> >>
> >> On 11/2/2017 10:34 AM, Mody, Rasesh wrote:
> >>>> From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
> >>>> Sent: Thursday, November 02, 2017 1:55 AM
> >>>>
> >>>> On 11/2/2017 1:03 AM, Mody, Rasesh wrote:
> >>>>>> From: Stephen Hemminger [mailto:stephen@networkplumber.org]
> >>>>>> Sent: Wednesday, November 01, 2017 7:12 AM
> >>>>>>
> >>>>>> On Wed, 1 Nov 2017 06:58:53 +0000 "Mody, Rasesh"
> >>>>>> <Rasesh.Mody@cavium.com> wrote:
> >>>>>>
> >>>>>>> Hi Jianfeng and Ferruh,
> >>>>>>>
> >>>>>>>> From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
> >>>>>>>> Sent: Thursday, October 26, 2017 5:50 PM
> >>>>>>>>
> >>>>>>>> On 10/26/2017 2:28 AM, Tan, Jianfeng wrote:
> >>>>>>>>> Hi Rasesh,
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> On 10/26/2017 7:43 AM, Mody, Rasesh wrote:
> >>>>>>>>>> Hi Ferruh,
> >>>>>>>>>>
> >>>>>>>>>>> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of
> Ferruh
> >>>>>>>>>>> Yigit
> >>>>>>>>>>> Sent: Friday, October 20, 2017 9:58 AM
> >>>>>>>>>>>
> >>>>>>>>>>> On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
> >>>>>>>>>>>> Remove device reset during application start, the reset for
> >>>>>>>>>>>> application exit still there.
> >>>>>>>>>>>>
> >>>>>>>>>>>> Reset in open removed because of following comments:
> >>>>>>>>>>>> 1- Device reset not completed when VF driver loaded, which
> >>>>>>>>>>>> cause VF
> >>>>>>>> PMD
> >>>>>>>>>>>> initialization error.
> >>>>>>>>>>>> Adding delay can solve the issue but will increase
> >>>>>>>>>>>> driver load
> >>>> time.
> >>>>>>>>>>>>
> >>>>>>>>>>>> 2- Reset will be issues all devices unconditionally, not
> >>>>>>>>>>>> very
> >>>> efficient
> >>>>>>>>>>>> way.
> >>>>>>>>>>>>
> >>>>>>>>>>>> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and
> >>>>>>>>>>>> release of device file")
> >>>>>>>>>>>> Cc: stable@dpdk.org
> >>>>>>>>>>>>
> >>>>>>>>>>>> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
> >>>>>>>>>>> Hi Jingjing, Shijith, Gregory, Harish,
> >>>>>>>>>>>
> >>>>>>>>>>> Can you please test this on top of current master (which has
> >>>>>>>>>>> already Jingjin's
> >>>>>>>>>>> fix) ?
> >>>>>>>>>> The original FLR change during igb_uio open()/release() in
> >>>>>>>>>> DPDK17.08 also
> >>>>>>>> impacts BNX2X PMD and it exhibits the issues with bare metal
> >> testing.
> >>>>>>>>>>
> >>>>>>>>>> Now, we tested this change for BNX2X PMD using latest dpdk,
> >>>>>>>>>> which has
> >>>>>>>> this fix where FLR is invoked only in the release().
> >>>>>>>>
> >>>>>>>> Good to hear this fixed the problem.
> >>>>>>>
> >>>>>>> Yes, it fixed the issue caused by pci reset during application start.
> >>>>>>>
> >>>>>>>>
> >>>>>>>>>> However, we ran into an issue when trying to reload the
> >>>>>>>>>> testpmd
> >>>>>>>> application in quick succession. The pci reset, called during
> >>>>>>>> the igb_uio
> >>>>>>>> release() operation, is taking longer time and adapter is still
> >>>>>>>> doing the FLR when we relaunch the application. We see this
> >>>>>>>> behavior with bare metal testing.
> >>>>>>>>>
> >>>>>>>>> If we don't reset that device, it will continue working which
> >>>>>>>>> is a more serious issue IMO.
> >>>>>>>>
> >>>>>>>> +1
> >>>>>>>
> >>>>>>> I think, it would better for the individual PMDs to take care of
> >>>>>>> the reset
> >>>>>> during the application exit.
> >>>>>>
> >>>>>> That will never be possible. Poll Mode Drivers are userspace
> >>>>>> entities and part of the application. If application crashes,
> >>>>>> there is no way for PMD to do cleanup, it must be handled by kernel.
> >>>>>
> >>>>> The pci reset in release is breaking the BNX2X PMD. Could we
> >>>>> revert this
> >>>> reset and get it included with a solution that works for all in the
> >>>> next
> >> release?
> >>>>
> >>>> Hi Rasesh,
> >>>>
> >>>> I am not sure if there is more to do for solution for next
> >>>> releases, and related to your case, indeed I wasn't expecting a
> >>>> device reset will take more than five minutes...
> >>>>
> >>>> Would you be OK to control the reset via a compile time config
> >>>> option, which is enabled by default. So you will need to disable it
> >>>> to
> >> prevent the reset?
> >>>
> >>> Hi Ferruh,
> >>>
> >>> As I understand, we will have a compile time config option, enabled
> >>> by
> >> default, to guard the pci_reset_function() in the
> >> igbuio_pci_release(). We will disable this config option to prevent the
> reset when using BNX2X.
> >>
> >> Yep, this is the idea.
> >>
> >>> The controlled reset should work for us.
> >>
> >> If there is no objection, I can send a patch for this.
> >
> > We are ok as we have at least some way to disable the reset, please send a
> patch.
>
> Sent http://dpdk.org/dev/patchwork/patch/31143/, can you please test?
The testing of BNX2X looks OK with this patch. However, the solution has following drawbacks:
- an application will need to be recompiled to have the igb_uio kernel module rebuilt to support bnx2x devices
- this will break pre-compiled solutions that are provided with an OS such as RHOSP or as part of a pre-compiled VNF
We can live with this temporary solution for now. In the long term, we may have to revisit this.
We are also looking at why bnx2x FLR is taking this long.
Thanks!
-Rasesh
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [PATCH] igb_uio: remove device reset in open
2017-10-20 16:55 ` [dpdk-stable] [PATCH] igb_uio: remove device reset in open Ferruh Yigit
2017-10-20 16:57 ` Ferruh Yigit
@ 2017-10-24 21:38 ` Ferruh Yigit
1 sibling, 0 replies; 33+ messages in thread
From: Ferruh Yigit @ 2017-10-24 21:38 UTC (permalink / raw)
Cc: Thomas Monjalon, dev, stable, Jianfeng Tan, Jingjing Wu,
Shijith Thotton, Gregory Etelson, Harish Patil, George Prekas,
Sergio Gonzalez Monroy
On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
> Remove device reset during application start, the reset for application
> exit still there.
>
> Reset in open removed because of following comments:
> 1- Device reset not completed when VF driver loaded, which cause VF PMD
> initialization error.
> Adding delay can solve the issue but will increase driver load time.
>
> 2- Reset will be issues all devices unconditionally, not very efficient
> way.
>
> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device file")
> Cc: stable@dpdk.org
>
> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Harish Patil <harish.patil@cavium.com>
Tested-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Tested-by: Jingjing Wu <jingjing.wu@intel.com>
Applied to dpdk/master, thanks.
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [PATCH] igb_uio: revert open and release operations
2017-10-17 20:14 [dpdk-stable] [PATCH] igb_uio: revert open and release operations Ferruh Yigit
2017-10-17 20:33 ` Thomas Monjalon
@ 2017-10-18 0:14 ` Wu, Jingjing
2017-10-18 6:27 ` Shijith Thotton
2017-10-24 21:32 ` Ferruh Yigit
3 siblings, 0 replies; 33+ messages in thread
From: Wu, Jingjing @ 2017-10-18 0:14 UTC (permalink / raw)
To: Yigit, Ferruh, Thomas Monjalon
Cc: dev, Tan, Jianfeng, Shijith Thotton, Gregory Etelson,
Harish Patil, George Prekas, stable
Hi, Ferruh
This one is generic, we can keep it.
Commit: 8cacf78469a7 ("net/i40e: fix VF initialization error")
Thanks
Jingjing
> -----Original Message-----
> From: Yigit, Ferruh
> Sent: Wednesday, October 18, 2017 4:15 AM
> To: Thomas Monjalon <thomas@monjalon.net>; Yigit, Ferruh
> <ferruh.yigit@intel.com>
> Cc: dev@dpdk.org; Tan, Jianfeng <jianfeng.tan@intel.com>; Wu, Jingjing
> <jingjing.wu@intel.com>; Shijith Thotton
> <shijith.thotton@caviumnetworks.com>; Gregory Etelson <gregory@weka.io>;
> Harish Patil <harish.patil@cavium.com>; George Prekas
> <george.prekas@epfl.ch>; stable@dpdk.org
> Subject: [PATCH] igb_uio: revert open and release operations
>
> This reverts commit 6b9ed026a8704b9e5ee5da7997617ef7cc82e114.
> This reverts commit 5f6ff30dc5075c49069d684bab229aef7ff0fdc3.
> This reverts commit b58eedfc7dd57eef6d12e2c654a52c834f36084a.
>
> There were bug reports about terminated application may leave device in
> undesired state:
> http://dpdk.org/ml/archives/dev/2016-November/049745.html
> http://dpdk.org/ml/archives/dev/2016-November/050932.html
>
> And a proposal to fix:
> http://dpdk.org/ml/archives/dev/2016-December/051844.html
>
> Later another proposal triggered the discussion:
> http://dpdk.org/ml/archives/dev/2017-May/066317.html
>
> Finally a fix patch pushed into v17.08:
> Commit: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device
> file")
>
> Later a regression report sent related to the pushed patch:
> http://dpdk.org/ml/archives/dev/2017-September/075236.html
>
> And a fix for regression integrated into v17.11-rc1:
> http://dpdk.org/ml/archives/dev/2017-October/079166.html
> Commit: 5f6ff30dc507 ("igb_uio: fix interrupt enablement after FLR in VM")
> Commit: 6b9ed026a870 ("igb_uio: fix build with kernel <= 3.17")
>
> Even after the fix qede PMD reported to be broken:
> http://dpdk.org/ml/archives/dev/2017-October/079359.html
>
> So this patch reverts original fix and related commits. The related igb_uio code
> part turns back to v17.05 base.
>
> Cc: Jianfeng Tan <jianfeng.tan@intel.com>
> Cc: Jingjing Wu <jingjing.wu@intel.com>
> Cc: Shijith Thotton <shijith.thotton@caviumnetworks.com>
> Cc: Gregory Etelson <gregory@weka.io>
> Cc: Harish Patil <harish.patil@cavium.com>
> Cc: George Prekas <george.prekas@epfl.ch>
>
> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device file")
> Cc: stable@dpdk.org
>
> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
> ---
> It would be nice to solve this issue in LTS release, but being close to the release
> and the error report without details makes it hard to work more on this issue.
>
> Thanks everyone who spent effort for this, hopefully we can continue to work
> on next release cycle.
>
> Jingjing, there is a i40e commit, was part of igb_uio fix patchset, is it generic,
> or needs to be reverted with this patch?
> Commit: 8cacf78469a7 ("net/i40e: fix VF initialization error")
> ---
> lib/librte_eal/linuxapp/igb_uio/igb_uio.c | 201 +++++++++++-------------------
> 1 file changed, 76 insertions(+), 125 deletions(-)
>
> diff --git a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> index f7ef82554..786df68a2 100644
> --- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> +++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> @@ -49,6 +49,7 @@ struct rte_uio_pci_dev {
>
> static char *intr_mode;
> static enum rte_intr_mode igbuio_intr_mode_preferred =
> RTE_INTR_MODE_MSIX;
> +
> /* sriov sysfs */
> static ssize_t
> show_max_vfs(struct device *dev, struct device_attribute *attr, @@ -207,22
> +208,80 @@ igbuio_pci_irqcontrol(struct uio_info *info, s32 irq_state)
> * If yes, disable it here and will be enable later.
> */
> static irqreturn_t
> -igbuio_pci_irqhandler(int irq, void *dev_id)
> +igbuio_pci_irqhandler(int irq, struct uio_info *info)
> {
> - struct rte_uio_pci_dev *udev = (struct rte_uio_pci_dev *)dev_id;
> - struct uio_info *info = &udev->info;
> + struct rte_uio_pci_dev *udev = info->priv;
>
> /* Legacy mode need to mask in hardware */
> if (udev->mode == RTE_INTR_MODE_LEGACY &&
> !pci_check_and_mask_intx(udev->pdev))
> return IRQ_NONE;
>
> - uio_event_notify(info);
> -
> /* Message signal mode, no share IRQ and automasked */
> return IRQ_HANDLED;
> }
>
> +/* Remap pci resources described by bar #pci_bar in uio resource n. */
> +static int igbuio_pci_setup_iomem(struct pci_dev *dev, struct uio_info
> +*info,
> + int n, int pci_bar, const char *name) {
> + unsigned long addr, len;
> + void *internal_addr;
> +
> + if (n >= ARRAY_SIZE(info->mem))
> + return -EINVAL;
> +
> + addr = pci_resource_start(dev, pci_bar);
> + len = pci_resource_len(dev, pci_bar);
> + if (addr == 0 || len == 0)
> + return -1;
> + internal_addr = ioremap(addr, len);
> + if (internal_addr == NULL)
> + return -1;
> + info->mem[n].name = name;
> + info->mem[n].addr = addr;
> + info->mem[n].internal_addr = internal_addr;
> + info->mem[n].size = len;
> + info->mem[n].memtype = UIO_MEM_PHYS;
> + return 0;
> +}
> +
> +/* Get pci port io resources described by bar #pci_bar in uio resource
> +n. */ static int igbuio_pci_setup_ioport(struct pci_dev *dev, struct
> +uio_info *info,
> + int n, int pci_bar, const char *name) {
> + unsigned long addr, len;
> +
> + if (n >= ARRAY_SIZE(info->port))
> + return -EINVAL;
> +
> + addr = pci_resource_start(dev, pci_bar);
> + len = pci_resource_len(dev, pci_bar);
> + if (addr == 0 || len == 0)
> + return -EINVAL;
> +
> + info->port[n].name = name;
> + info->port[n].start = addr;
> + info->port[n].size = len;
> + info->port[n].porttype = UIO_PORT_X86;
> +
> + return 0;
> +}
> +
> +/* Unmap previously ioremap'd resources */ static void
> +igbuio_pci_release_iomem(struct uio_info *info) {
> + int i;
> +
> + for (i = 0; i < MAX_UIO_MAPS; i++) {
> + if (info->mem[i].internal_addr)
> + iounmap(info->mem[i].internal_addr);
> + }
> +}
> +
> static int
> igbuio_pci_enable_interrupts(struct rte_uio_pci_dev *udev) { @@ -252,7
> +311,6 @@ igbuio_pci_enable_interrupts(struct rte_uio_pci_dev *udev)
> break;
> }
> #endif
> -
> /* fall back to MSI */
> case RTE_INTR_MODE_MSI:
> #ifndef HAVE_ALLOC_IRQ_VECTORS
> @@ -291,28 +349,15 @@ igbuio_pci_enable_interrupts(struct rte_uio_pci_dev
> *udev)
> default:
> dev_err(&udev->pdev->dev, "invalid IRQ mode %u",
> igbuio_intr_mode_preferred);
> - udev->info.irq = UIO_IRQ_NONE;
> err = -EINVAL;
> }
>
> - if (udev->info.irq != UIO_IRQ_NONE)
> - err = request_irq(udev->info.irq, igbuio_pci_irqhandler,
> - udev->info.irq_flags, udev->info.name,
> - udev);
> - dev_info(&udev->pdev->dev, "uio device registered with irq %lx\n",
> - udev->info.irq);
> -
> return err;
> }
>
> static void
> igbuio_pci_disable_interrupts(struct rte_uio_pci_dev *udev) {
> - if (udev->info.irq) {
> - free_irq(udev->info.irq, udev);
> - udev->info.irq = 0;
> - }
> -
> #ifndef HAVE_ALLOC_IRQ_VECTORS
> if (udev->mode == RTE_INTR_MODE_MSIX)
> pci_disable_msix(udev->pdev);
> @@ -325,109 +370,6 @@ igbuio_pci_disable_interrupts(struct rte_uio_pci_dev
> *udev) #endif }
>
> -
> -/**
> - * This gets called while opening uio device file.
> - */
> -static int
> -igbuio_pci_open(struct uio_info *info, struct inode *inode) -{
> - struct rte_uio_pci_dev *udev = info->priv;
> - struct pci_dev *dev = udev->pdev;
> - int err;
> -
> - pci_reset_function(dev);
> -
> - /* set bus master, which was cleared by the reset function */
> - pci_set_master(dev);
> -
> - /* enable interrupts */
> - err = igbuio_pci_enable_interrupts(udev);
> - if (err) {
> - dev_err(&dev->dev, "Enable interrupt fails\n");
> - return err;
> - }
> - return 0;
> -}
> -
> -static int
> -igbuio_pci_release(struct uio_info *info, struct inode *inode) -{
> - struct rte_uio_pci_dev *udev = info->priv;
> - struct pci_dev *dev = udev->pdev;
> -
> - /* disable interrupts */
> - igbuio_pci_disable_interrupts(udev);
> -
> - /* stop the device from further DMA */
> - pci_clear_master(dev);
> -
> - pci_reset_function(dev);
> -
> - return 0;
> -}
> -
> -/* Remap pci resources described by bar #pci_bar in uio resource n. */ -static
> int -igbuio_pci_setup_iomem(struct pci_dev *dev, struct uio_info *info,
> - int n, int pci_bar, const char *name)
> -{
> - unsigned long addr, len;
> - void *internal_addr;
> -
> - if (n >= ARRAY_SIZE(info->mem))
> - return -EINVAL;
> -
> - addr = pci_resource_start(dev, pci_bar);
> - len = pci_resource_len(dev, pci_bar);
> - if (addr == 0 || len == 0)
> - return -1;
> - internal_addr = ioremap(addr, len);
> - if (internal_addr == NULL)
> - return -1;
> - info->mem[n].name = name;
> - info->mem[n].addr = addr;
> - info->mem[n].internal_addr = internal_addr;
> - info->mem[n].size = len;
> - info->mem[n].memtype = UIO_MEM_PHYS;
> - return 0;
> -}
> -
> -/* Get pci port io resources described by bar #pci_bar in uio resource n. */ -
> static int -igbuio_pci_setup_ioport(struct pci_dev *dev, struct uio_info *info,
> - int n, int pci_bar, const char *name)
> -{
> - unsigned long addr, len;
> -
> - if (n >= ARRAY_SIZE(info->port))
> - return -EINVAL;
> -
> - addr = pci_resource_start(dev, pci_bar);
> - len = pci_resource_len(dev, pci_bar);
> - if (addr == 0 || len == 0)
> - return -EINVAL;
> -
> - info->port[n].name = name;
> - info->port[n].start = addr;
> - info->port[n].size = len;
> - info->port[n].porttype = UIO_PORT_X86;
> -
> - return 0;
> -}
> -
> -/* Unmap previously ioremap'd resources */ -static void -
> igbuio_pci_release_iomem(struct uio_info *info) -{
> - int i;
> -
> - for (i = 0; i < MAX_UIO_MAPS; i++) {
> - if (info->mem[i].internal_addr)
> - iounmap(info->mem[i].internal_addr);
> - }
> -}
> -
> static int
> igbuio_setup_bars(struct pci_dev *dev, struct uio_info *info) { @@ -518,16
> +460,19 @@ igbuio_pci_probe(struct pci_dev *dev, const struct pci_device_id
> *id)
> /* fill uio infos */
> udev->info.name = "igb_uio";
> udev->info.version = "0.1";
> + udev->info.handler = igbuio_pci_irqhandler;
> udev->info.irqcontrol = igbuio_pci_irqcontrol;
> - udev->info.open = igbuio_pci_open;
> - udev->info.release = igbuio_pci_release;
> udev->info.priv = udev;
> udev->pdev = dev;
>
> - err = sysfs_create_group(&dev->dev.kobj, &dev_attr_grp);
> + err = igbuio_pci_enable_interrupts(udev);
> if (err != 0)
> goto fail_release_iomem;
>
> + err = sysfs_create_group(&dev->dev.kobj, &dev_attr_grp);
> + if (err != 0)
> + goto fail_disable_interrupts;
> +
> /* register uio driver */
> err = uio_register_device(&dev->dev, &udev->info);
> if (err != 0)
> @@ -535,6 +480,9 @@ igbuio_pci_probe(struct pci_dev *dev, const struct
> pci_device_id *id)
>
> pci_set_drvdata(dev, udev);
>
> + dev_info(&dev->dev, "uio device registered with irq %lx\n",
> + udev->info.irq);
> +
> /*
> * Doing a harmless dma mapping for attaching the device to
> * the iommu identity mapping if kernel boots with iommu=pt.
> @@ -560,6 +508,8 @@ igbuio_pci_probe(struct pci_dev *dev, const struct
> pci_device_id *id)
>
> fail_remove_group:
> sysfs_remove_group(&dev->dev.kobj, &dev_attr_grp);
> +fail_disable_interrupts:
> + igbuio_pci_disable_interrupts(udev);
> fail_release_iomem:
> igbuio_pci_release_iomem(&udev->info);
> pci_disable_device(dev);
> @@ -576,6 +526,7 @@ igbuio_pci_remove(struct pci_dev *dev)
>
> sysfs_remove_group(&dev->dev.kobj, &dev_attr_grp);
> uio_unregister_device(&udev->info);
> + igbuio_pci_disable_interrupts(udev);
> igbuio_pci_release_iomem(&udev->info);
> pci_disable_device(dev);
> pci_set_drvdata(dev, NULL);
> --
> 2.13.6
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [PATCH] igb_uio: revert open and release operations
2017-10-17 20:14 [dpdk-stable] [PATCH] igb_uio: revert open and release operations Ferruh Yigit
2017-10-17 20:33 ` Thomas Monjalon
2017-10-18 0:14 ` [dpdk-stable] [PATCH] igb_uio: revert open and release operations Wu, Jingjing
@ 2017-10-18 6:27 ` Shijith Thotton
2017-10-18 20:47 ` Ferruh Yigit
2017-10-24 21:32 ` Ferruh Yigit
3 siblings, 1 reply; 33+ messages in thread
From: Shijith Thotton @ 2017-10-18 6:27 UTC (permalink / raw)
To: Ferruh Yigit
Cc: Thomas Monjalon, dev, Jianfeng Tan, Jingjing Wu, Gregory Etelson,
Harish Patil, George Prekas, stable
On Tue, Oct 17, 2017 at 09:14:36PM +0100, Ferruh Yigit wrote:
> This reverts commit 6b9ed026a8704b9e5ee5da7997617ef7cc82e114.
> This reverts commit 5f6ff30dc5075c49069d684bab229aef7ff0fdc3.
> This reverts commit b58eedfc7dd57eef6d12e2c654a52c834f36084a.
>
> There were bug reports about terminated application may leave device in
> undesired state:
> http://dpdk.org/ml/archives/dev/2016-November/049745.html
> http://dpdk.org/ml/archives/dev/2016-November/050932.html
>
> And a proposal to fix:
> http://dpdk.org/ml/archives/dev/2016-December/051844.html
>
> Later another proposal triggered the discussion:
> http://dpdk.org/ml/archives/dev/2017-May/066317.html
>
> Finally a fix patch pushed into v17.08:
> Commit: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device file")
>
> Later a regression report sent related to the pushed patch:
> http://dpdk.org/ml/archives/dev/2017-September/075236.html
>
> And a fix for regression integrated into v17.11-rc1:
> http://dpdk.org/ml/archives/dev/2017-October/079166.html
> Commit: 5f6ff30dc507 ("igb_uio: fix interrupt enablement after FLR in VM")
> Commit: 6b9ed026a870 ("igb_uio: fix build with kernel <= 3.17")
>
> Even after the fix qede PMD reported to be broken:
> http://dpdk.org/ml/archives/dev/2017-October/079359.html
>
> So this patch reverts original fix and related commits. The related
> igb_uio code part turns back to v17.05 base.
>
> Cc: Jianfeng Tan <jianfeng.tan@intel.com>
> Cc: Jingjing Wu <jingjing.wu@intel.com>
> Cc: Shijith Thotton <shijith.thotton@caviumnetworks.com>
> Cc: Gregory Etelson <gregory@weka.io>
> Cc: Harish Patil <harish.patil@cavium.com>
> Cc: George Prekas <george.prekas@epfl.ch>
>
> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device file")
> Cc: stable@dpdk.org
>
> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
> ---
> It would be nice to solve this issue in LTS release, but being close to
> the release and the error report without details makes it hard to work
> more on this issue.
>
> Thanks everyone who spent effort for this, hopefully we can continue to
> work on next release cycle.
>
> Jingjing, there is a i40e commit, was part of igb_uio fix patchset, is
> it generic, or needs to be reverted with this patch?
> Commit: 8cacf78469a7 ("net/i40e: fix VF initialization error")
Hi Ferruh,
Please consider this patch as part of revert.
Commit: 9ed3f38770c6 ("net/liquidio: remove FLR request to PF driver")
Here I have removed extra FLR requests inside driver during init and close.
They are required now, as we remove resets in igb_uio.
Thanks,
Shijith
[...]
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [PATCH] igb_uio: revert open and release operations
2017-10-18 6:27 ` Shijith Thotton
@ 2017-10-18 20:47 ` Ferruh Yigit
0 siblings, 0 replies; 33+ messages in thread
From: Ferruh Yigit @ 2017-10-18 20:47 UTC (permalink / raw)
To: Shijith Thotton
Cc: Thomas Monjalon, dev, Jianfeng Tan, Jingjing Wu, Gregory Etelson,
Harish Patil, George Prekas, stable
On 10/17/2017 11:27 PM, Shijith Thotton wrote:
> On Tue, Oct 17, 2017 at 09:14:36PM +0100, Ferruh Yigit wrote:
>> This reverts commit 6b9ed026a8704b9e5ee5da7997617ef7cc82e114.
>> This reverts commit 5f6ff30dc5075c49069d684bab229aef7ff0fdc3.
>> This reverts commit b58eedfc7dd57eef6d12e2c654a52c834f36084a.
>>
>> There were bug reports about terminated application may leave device in
>> undesired state:
>> http://dpdk.org/ml/archives/dev/2016-November/049745.html
>> http://dpdk.org/ml/archives/dev/2016-November/050932.html
>>
>> And a proposal to fix:
>> http://dpdk.org/ml/archives/dev/2016-December/051844.html
>>
>> Later another proposal triggered the discussion:
>> http://dpdk.org/ml/archives/dev/2017-May/066317.html
>>
>> Finally a fix patch pushed into v17.08:
>> Commit: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device file")
>>
>> Later a regression report sent related to the pushed patch:
>> http://dpdk.org/ml/archives/dev/2017-September/075236.html
>>
>> And a fix for regression integrated into v17.11-rc1:
>> http://dpdk.org/ml/archives/dev/2017-October/079166.html
>> Commit: 5f6ff30dc507 ("igb_uio: fix interrupt enablement after FLR in VM")
>> Commit: 6b9ed026a870 ("igb_uio: fix build with kernel <= 3.17")
>>
>> Even after the fix qede PMD reported to be broken:
>> http://dpdk.org/ml/archives/dev/2017-October/079359.html
>>
>> So this patch reverts original fix and related commits. The related
>> igb_uio code part turns back to v17.05 base.
>>
>> Cc: Jianfeng Tan <jianfeng.tan@intel.com>
>> Cc: Jingjing Wu <jingjing.wu@intel.com>
>> Cc: Shijith Thotton <shijith.thotton@caviumnetworks.com>
>> Cc: Gregory Etelson <gregory@weka.io>
>> Cc: Harish Patil <harish.patil@cavium.com>
>> Cc: George Prekas <george.prekas@epfl.ch>
>>
>> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device file")
>> Cc: stable@dpdk.org
>>
>> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
>> ---
>> It would be nice to solve this issue in LTS release, but being close to
>> the release and the error report without details makes it hard to work
>> more on this issue.
>>
>> Thanks everyone who spent effort for this, hopefully we can continue to
>> work on next release cycle.
>>
>> Jingjing, there is a i40e commit, was part of igb_uio fix patchset, is
>> it generic, or needs to be reverted with this patch?
>> Commit: 8cacf78469a7 ("net/i40e: fix VF initialization error")
>
> Hi Ferruh,
>
> Please consider this patch as part of revert.
> Commit: 9ed3f38770c6 ("net/liquidio: remove FLR request to PF driver")
Hi Shijith,
Sure, I will add this on next version of the patch.
>
> Here I have removed extra FLR requests inside driver during init and close.
> They are required now, as we remove resets in igb_uio.
>
> Thanks,
> Shijith
>
> [...]
>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [PATCH] igb_uio: revert open and release operations
2017-10-17 20:14 [dpdk-stable] [PATCH] igb_uio: revert open and release operations Ferruh Yigit
` (2 preceding siblings ...)
2017-10-18 6:27 ` Shijith Thotton
@ 2017-10-24 21:32 ` Ferruh Yigit
3 siblings, 0 replies; 33+ messages in thread
From: Ferruh Yigit @ 2017-10-24 21:32 UTC (permalink / raw)
To: Thomas Monjalon
Cc: dev, Jianfeng Tan, Jingjing Wu, Shijith Thotton, Gregory Etelson,
Harish Patil, George Prekas, stable, Sergio Gonzalez Monroy
On 10/17/2017 1:14 PM, Ferruh Yigit wrote:
> This reverts commit 6b9ed026a8704b9e5ee5da7997617ef7cc82e114.
> This reverts commit 5f6ff30dc5075c49069d684bab229aef7ff0fdc3.
> This reverts commit b58eedfc7dd57eef6d12e2c654a52c834f36084a.
>
> There were bug reports about terminated application may leave device in
> undesired state:
> http://dpdk.org/ml/archives/dev/2016-November/049745.html
> http://dpdk.org/ml/archives/dev/2016-November/050932.html
>
> And a proposal to fix:
> http://dpdk.org/ml/archives/dev/2016-December/051844.html
>
> Later another proposal triggered the discussion:
> http://dpdk.org/ml/archives/dev/2017-May/066317.html
>
> Finally a fix patch pushed into v17.08:
> Commit: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device file")
>
> Later a regression report sent related to the pushed patch:
> http://dpdk.org/ml/archives/dev/2017-September/075236.html
>
> And a fix for regression integrated into v17.11-rc1:
> http://dpdk.org/ml/archives/dev/2017-October/079166.html
> Commit: 5f6ff30dc507 ("igb_uio: fix interrupt enablement after FLR in VM")
> Commit: 6b9ed026a870 ("igb_uio: fix build with kernel <= 3.17")
>
> Even after the fix qede PMD reported to be broken:
> http://dpdk.org/ml/archives/dev/2017-October/079359.html
>
> So this patch reverts original fix and related commits. The related
> igb_uio code part turns back to v17.05 base.
>
> Cc: Jianfeng Tan <jianfeng.tan@intel.com>
> Cc: Jingjing Wu <jingjing.wu@intel.com>
> Cc: Shijith Thotton <shijith.thotton@caviumnetworks.com>
> Cc: Gregory Etelson <gregory@weka.io>
> Cc: Harish Patil <harish.patil@cavium.com>
> Cc: George Prekas <george.prekas@epfl.ch>
>
> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of device file")
> Cc: stable@dpdk.org
>
> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
> ---
> It would be nice to solve this issue in LTS release, but being close to
> the release and the error report without details makes it hard to work
> more on this issue.
>
> Thanks everyone who spent effort for this, hopefully we can continue to
> work on next release cycle.
>
> Jingjing, there is a i40e commit, was part of igb_uio fix patchset, is
> it generic, or needs to be reverted with this patch?
> Commit: 8cacf78469a7 ("net/i40e: fix VF initialization error")
This patch is no more valid and will be marked as rejected, since instead of
revert, agreed on a solution [1].
[1]
http://dpdk.org/ml/archives/dev/2017-October/thread.html#79815
http://dpdk.org/dev/patchwork/patch/30654/
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [dpdk-stable] [dpdk-dev] [PATCH] igb_uio: remove device reset in open
@ 2017-10-22 16:06 Patil, Harish
0 siblings, 0 replies; 33+ messages in thread
From: Patil, Harish @ 2017-10-22 16:06 UTC (permalink / raw)
To: Ferruh Yigit, Jingjing Wu, Thotton, Shijith, Gregory Etelson
Cc: Thomas Monjalon, dev, stable, Jianfeng Tan, George Prekas,
Sergio Gonzalez Monroy
-----Original Message-----
From: dev <dev-bounces@dpdk.org> on behalf of Harish Patil
<Harish.Patil@cavium.com>
Date: Friday, October 20, 2017 at 3:18 PM
To: Ferruh Yigit <ferruh.yigit@intel.com>, Jingjing Wu
<jingjing.wu@intel.com>, "Thotton, Shijith" <Shijith.Thotton@cavium.com>,
Gregory Etelson <gregory@weka.io>
Cc: Thomas Monjalon <thomas@monjalon.net>, "dev@dpdk.org" <dev@dpdk.org>,
"stable@dpdk.org" <stable@dpdk.org>, Jianfeng Tan
<jianfeng.tan@intel.com>, George Prekas <george.prekas@epfl.ch>, Sergio
Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Subject: Re: [dpdk-dev] [PATCH] igb_uio: remove device reset in open
>[This sender failed our fraud detection checks and may not be who they
>appear to be. Learn about spoofing at http://aka.ms/LearnAboutSpoofing]
>
>-----Original Message-----
>From: Ferruh Yigit <ferruh.yigit@intel.com>
>Date: Friday, October 20, 2017 at 9:57 AM
>To: Jingjing Wu <jingjing.wu@intel.com>, "Thotton, Shijith"
><Shijith.Thotton@cavium.com>, Gregory Etelson <gregory@weka.io>, Harish
>Patil <Harish.Patil@cavium.com>
>Cc: Thomas Monjalon <thomas@monjalon.net>, "dev@dpdk.org" <dev@dpdk.org>,
>"stable@dpdk.org" <stable@dpdk.org>, Jianfeng Tan
><jianfeng.tan@intel.com>, George Prekas <george.prekas@epfl.ch>, Sergio
>Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
>Subject: Re: [PATCH] igb_uio: remove device reset in open
>
>>On 10/20/2017 9:55 AM, Ferruh Yigit wrote:
>>> Remove device reset during application start, the reset for application
>>> exit still there.
>>>
>>> Reset in open removed because of following comments:
>>> 1- Device reset not completed when VF driver loaded, which cause VF PMD
>>> initialization error.
>>> Adding delay can solve the issue but will increase driver load time.
>>>
>>> 2- Reset will be issues all devices unconditionally, not very efficient
>>> way.
>>>
>>> Fixes: b58eedfc7dd5 ("igb_uio: issue FLR during open and release of
>>>device file")
>>> Cc: stable@dpdk.org
>>>
>>> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
>>
>>Hi Jingjing, Shijith, Gregory, Harish,
>>
>>Can you please test this on top of current master (which has already
>>Jingjin's
>>fix) ?
>>
>>Thanks,
>>Ferruh
>
>
>Ferruh,
>Sure, will try and get back to you.
>Thanks.
Ferruh and all,
This takes care of our SR-IOV VF issue.
Thanks.
>>
>>> ---
>>> Cc: Jianfeng Tan <jianfeng.tan@intel.com>
>>> Cc: Jingjing Wu <jingjing.wu@intel.com>
>>> Cc: Shijith Thotton <shijith.thotton@caviumnetworks.com>
>>> Cc: Gregory Etelson <gregory@weka.io>
>>> Cc: Harish Patil <harish.patil@cavium.com>
>>> Cc: George Prekas <george.prekas@epfl.ch>
>>> Cc: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
>>> ---
>>> lib/librte_eal/linuxapp/igb_uio/igb_uio.c | 2 --
>>> 1 file changed, 2 deletions(-)
>>>
>>> diff --git a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
>>>b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
>>> index f7ef82554..fd320d87d 100644
>>> --- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
>>> +++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
>>> @@ -336,8 +336,6 @@ igbuio_pci_open(struct uio_info *info, struct inode
>>>*inode)
>>> struct pci_dev *dev = udev->pdev;
>>> int err;
>>>
>>> - pci_reset_function(dev);
>>> -
>>> /* set bus master, which was cleared by the reset function */
>>> pci_set_master(dev);
>>>
>>>
>>
>
^ permalink raw reply [flat|nested] 33+ messages in thread
end of thread, other threads:[~2017-11-03 19:18 UTC | newest]
Thread overview: 33+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-10-17 20:14 [dpdk-stable] [PATCH] igb_uio: revert open and release operations Ferruh Yigit
2017-10-17 20:33 ` Thomas Monjalon
2017-10-18 4:50 ` Patil, Harish
2017-10-19 22:43 ` Patil, Harish
2017-10-20 1:15 ` Ferruh Yigit
2017-10-20 15:26 ` Tan, Jianfeng
2017-10-20 16:32 ` Ferruh Yigit
2017-10-20 16:55 ` [dpdk-stable] [PATCH] igb_uio: remove device reset in open Ferruh Yigit
2017-10-20 16:57 ` Ferruh Yigit
2017-10-20 19:01 ` Gregory Etelson
2017-10-20 22:18 ` Patil, Harish
2017-10-23 12:28 ` Shijith Thotton
2017-10-23 16:36 ` Ferruh Yigit
2017-10-23 19:03 ` Shijith Thotton
2017-10-24 2:45 ` Wu, Jingjing
2017-10-25 23:43 ` [dpdk-stable] [dpdk-dev] " Mody, Rasesh
2017-10-26 9:28 ` Tan, Jianfeng
2017-10-27 0:49 ` Ferruh Yigit
2017-11-01 6:58 ` Mody, Rasesh
2017-11-01 14:12 ` Stephen Hemminger
2017-11-02 8:03 ` Mody, Rasesh
2017-11-02 8:55 ` Ferruh Yigit
2017-11-02 17:34 ` Mody, Rasesh
2017-11-02 18:09 ` Ferruh Yigit
2017-11-02 18:45 ` Mody, Rasesh
2017-11-03 0:31 ` Ferruh Yigit
2017-11-03 19:18 ` Mody, Rasesh
2017-10-24 21:38 ` [dpdk-stable] " Ferruh Yigit
2017-10-18 0:14 ` [dpdk-stable] [PATCH] igb_uio: revert open and release operations Wu, Jingjing
2017-10-18 6:27 ` Shijith Thotton
2017-10-18 20:47 ` Ferruh Yigit
2017-10-24 21:32 ` Ferruh Yigit
2017-10-22 16:06 [dpdk-stable] [dpdk-dev] [PATCH] igb_uio: remove device reset in open Patil, Harish
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).