Re: [dpdk-stable] [dpdk-dev] [PATCH v2] net/virtio: fix an incorrect behavior of device stop/start

[Tiwei Bie <tiwei.bie@intel.com>]

On Wed, Nov 15, 2017 at 01:38:32AM +0800, Fischetti, Antonio wrote:
> Hi Tiwei,
> 
> I'm doing some regression tests with v17.11-rc4. I ran 
> into a hitch with testpmd running into a guest VM. It happens 
> that no packet gets forwarded by testpmd.
> The issue seems to appear after this patch was upstreamed.
> 
> I saw there's a way to make it work, ie by avoiding to 
> increment the last consumed descriptor:
> 
> --- a/drivers/net/virtio/virtqueue.c
> +++ b/drivers/net/virtio/virtqueue.c
> @@ -80,7 +80,7 @@ virtqueue_flush(struct virtqueue *vq)
>                         rte_pktmbuf_free(dxp->cookie);
>                         dxp->cookie = NULL;
>                 }
> -               vq->vq_used_cons_idx++;
> +               //vq->vq_used_cons_idx++;
>                 vq_ring_free_chain(vq, desc_idx);
> 
> Not quite sure if this change make any sense to you?
> 
> Some details below.
> 
> The issue appears only if the traffic generator is already 
> sending packets before I launch testpmd in the guest.
> 
> In my testbench I have Open-vSwitch (OvS-DPDK) which launches 
> a VM with 2 vhostuserclient ports (vhu0 and vhu1), each with 
> a single queue.
> My OvS has 2 physical ports: dpdk0 and dpdk1.
> dpdk0 forwards packets back and forth from/to the generator
> to/from vhu0.
> Similarly, dpdk1 forwards packets back and forth from/to the generator
> to/from vhu1.
> 
> In OvS there are 2 different PMD threads serving the 2 
> vhostuserclient ports.
> 
> While the traffic generator is already sending packets, in the 
> guest VM I launch 
>   ./testpmd -c 0x3 -n 4 --socket-mem 512 -- --burst=64 -i --txqflags=0xf00 --disable-hw-vlan
> 
> The issue is that I see no packet received on the traffic generator 
> and in fact testpmd shows
> 
> ---------------------- Forward statistics for port 0  ----------------------
>   RX-packets: 0              RX-dropped: 0             RX-total: 0
>   TX-packets: 0              TX-dropped: 0             TX-total: 0
>   ----------------------------------------------------------------------------
> 
>   ---------------------- Forward statistics for port 1  ----------------------
>   RX-packets: 0              RX-dropped: 0             RX-total: 0
>   TX-packets: 0              TX-dropped: 0             TX-total: 0
>   ----------------------------------------------------------------------------
> 
>   +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
>   RX-packets: 0              RX-dropped: 0             RX-total: 0
>   TX-packets: 0              TX-dropped: 0             TX-total: 0
>   ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 
> Please let me know if I missed something or if you need 
> more info on my testbench.
> 

Hi Antonio,

I'm very sorry, I missed this mail before.. Thank you so much for
reporting this issue and the detailed info. I'll look into this!

Best regards,
Tiwei Bie

> 
> Thanks,
> Antonio
> 
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Tiwei Bie
> > Sent: Friday, October 20, 2017 3:09 AM
> > To: dev@dpdk.org
> > Cc: yliu@fridaylinux.org; maxime.coquelin@redhat.com;
> > jfreimann@redhat.com; stable@dpdk.org
> > Subject: [dpdk-dev] [PATCH v2] net/virtio: fix an incorrect behavior of
> > device stop/start
> > 
> > After starting a device, the driver shouldn't deliver the
> > packets that already existed before the device is started
> > to applications. Otherwise it will lead to incorrect packet
> > collection for port state. This patch fixes this issue by
> > flushing the Rx queues when starting the device.
> > 
> > Fixes: a85786dc816f ("virtio: fix states handling during
> > initialization")
> > Cc: stable@dpdk.org
> > 
> > Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
> > Reviewed-by: Jens Freimann <jfreimann@redhat.com>
> > ---
> > v2:
> > - Use the existing `for` loop
> > - Improve the commit log
> > 
> >  drivers/net/virtio/virtio_ethdev.c |  2 ++
> >  drivers/net/virtio/virtio_rxtx.c   |  2 +-
> >  drivers/net/virtio/virtqueue.c     | 25 +++++++++++++++++++++++++
> >  drivers/net/virtio/virtqueue.h     |  5 +++++
> >  4 files changed, 33 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/net/virtio/virtio_ethdev.c
> > b/drivers/net/virtio/virtio_ethdev.c
> > index 42c2836..9ccb0f4 100644
> > --- a/drivers/net/virtio/virtio_ethdev.c
> > +++ b/drivers/net/virtio/virtio_ethdev.c
> > @@ -1819,6 +1819,8 @@ virtio_dev_start(struct rte_eth_dev *dev)
> > 
> >  	for (i = 0; i < dev->data->nb_rx_queues; i++) {
> >  		rxvq = dev->data->rx_queues[i];
> > +		/* Flush the old packets */
> > +		virtqueue_flush(rxvq->vq);
> >  		virtqueue_notify(rxvq->vq);
> >  	}
> > 
> > diff --git a/drivers/net/virtio/virtio_rxtx.c
> > b/drivers/net/virtio/virtio_rxtx.c
> > index 609b413..f5b6f94 100644
> > --- a/drivers/net/virtio/virtio_rxtx.c
> > +++ b/drivers/net/virtio/virtio_rxtx.c
> > @@ -80,7 +80,7 @@ virtio_dev_rx_queue_done(void *rxq, uint16_t offset)
> >  	return VIRTQUEUE_NUSED(vq) >= offset;
> >  }
> > 
> > -static void
> > +void
> >  vq_ring_free_chain(struct virtqueue *vq, uint16_t desc_idx)
> >  {
> >  	struct vring_desc *dp, *dp_tail;
> > diff --git a/drivers/net/virtio/virtqueue.c
> > b/drivers/net/virtio/virtqueue.c
> > index 9ad77b8..c3a536f 100644
> > --- a/drivers/net/virtio/virtqueue.c
> > +++ b/drivers/net/virtio/virtqueue.c
> > @@ -59,3 +59,28 @@ virtqueue_detatch_unused(struct virtqueue *vq)
> >  		}
> >  	return NULL;
> >  }
> > +
> > +/* Flush the elements in the used ring. */
> > +void
> > +virtqueue_flush(struct virtqueue *vq)
> > +{
> > +	struct vring_used_elem *uep;
> > +	struct vq_desc_extra *dxp;
> > +	uint16_t used_idx, desc_idx;
> > +	uint16_t nb_used, i;
> > +
> > +	nb_used = VIRTQUEUE_NUSED(vq);
> > +
> > +	for (i = 0; i < nb_used; i++) {
> > +		used_idx = vq->vq_used_cons_idx & (vq->vq_nentries - 1);
> > +		uep = &vq->vq_ring.used->ring[used_idx];
> > +		desc_idx = (uint16_t)uep->id;
> > +		dxp = &vq->vq_descx[desc_idx];
> > +		if (dxp->cookie != NULL) {
> > +			rte_pktmbuf_free(dxp->cookie);
> > +			dxp->cookie = NULL;
> > +		}
> > +		vq->vq_used_cons_idx++;
> > +		vq_ring_free_chain(vq, desc_idx);
> > +	}
> > +}
> > diff --git a/drivers/net/virtio/virtqueue.h
> > b/drivers/net/virtio/virtqueue.h
> > index 9c4f96d..11059fb 100644
> > --- a/drivers/net/virtio/virtqueue.h
> > +++ b/drivers/net/virtio/virtqueue.h
> > @@ -304,6 +304,9 @@ void virtqueue_dump(struct virtqueue *vq);
> >   */
> >  struct rte_mbuf *virtqueue_detatch_unused(struct virtqueue *vq);
> > 
> > +/* Flush the elements in the used ring. */
> > +void virtqueue_flush(struct virtqueue *vq);
> > +
> >  static inline int
> >  virtqueue_full(const struct virtqueue *vq)
> >  {
> > @@ -312,6 +315,8 @@ virtqueue_full(const struct virtqueue *vq)
> > 
> >  #define VIRTQUEUE_NUSED(vq) ((uint16_t)((vq)->vq_ring.used->idx - (vq)-
> > >vq_used_cons_idx))
> > 
> > +void vq_ring_free_chain(struct virtqueue *vq, uint16_t desc_idx);
> > +
> >  static inline void
> >  vq_update_avail_idx(struct virtqueue *vq)
> >  {
> > --
> > 2.7.4
>