patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Yuanhan Liu <yliu@fridaylinux.org>
To: Ajit Khaparde <ajit.khaparde@broadcom.com>
Cc: dpdk stable <stable@dpdk.org>
Subject: [dpdk-stable] patch 'net/bnxt: fix Rx checksum flags for tunnel frames' has been queued to LTS release 17.11.3
Date: Sun,  6 May 2018 14:36:29 +0800	[thread overview]
Message-ID: <20180506063639.23196-16-yliu@fridaylinux.org> (raw)
In-Reply-To: <20180506063639.23196-1-yliu@fridaylinux.org>

Hi,

FYI, your patch has been queued to LTS release 17.11.3

Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 05/09/18. So please
shout if anyone has objections.

Thanks.

	--yliu

---
>From 517758bd5d464e8ec56396e9777a966619b1c612 Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajit.khaparde@broadcom.com>
Date: Mon, 16 Apr 2018 18:11:17 -0700
Subject: [PATCH] net/bnxt: fix Rx checksum flags for tunnel frames

[ upstream commit f3a050b65852ba3cfaebdae24cdd4edd54f82380 ]

Fix Rx checksum status for tunnel frames as seen by hardware.
Current code does not handle cases for tunnel frames correctly.

Fixes: 7ec39d8c524b ("net/bnxt: update status of Rx IP/L4 CKSUM")

Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
 drivers/net/bnxt/bnxt_rxr.h | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/net/bnxt/bnxt_rxr.h b/drivers/net/bnxt/bnxt_rxr.h
index a94373d19..05d6c3cd1 100644
--- a/drivers/net/bnxt/bnxt_rxr.h
+++ b/drivers/net/bnxt/bnxt_rxr.h
@@ -52,17 +52,25 @@
 #define BNXT_TPA_OUTER_L3_OFF(hdr_info)	\
 	((hdr_info) & 0x1ff)
 
-#define RX_CMP_L4_CS_BITS	rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS2_L4_CS_CALC)
+#define RX_CMP_L4_CS_BITS	\
+	rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS2_L4_CS_CALC | \
+			 RX_PKT_CMPL_FLAGS2_T_L4_CS_CALC)
 
-#define RX_CMP_L4_CS_ERR_BITS	rte_cpu_to_le_32(RX_PKT_CMPL_ERRORS_L4_CS_ERROR)
+#define RX_CMP_L4_CS_ERR_BITS	\
+	rte_cpu_to_le_32(RX_PKT_CMPL_ERRORS_L4_CS_ERROR | \
+			 RX_PKT_CMPL_ERRORS_T_L4_CS_ERROR)
 
 #define RX_CMP_L4_CS_OK(rxcmp1)						\
 	    (((rxcmp1)->flags2 & RX_CMP_L4_CS_BITS) &&		\
 	     !((rxcmp1)->errors_v2 & RX_CMP_L4_CS_ERR_BITS))
 
-#define RX_CMP_IP_CS_ERR_BITS	rte_cpu_to_le_32(RX_PKT_CMPL_ERRORS_IP_CS_ERROR)
+#define RX_CMP_IP_CS_ERR_BITS	\
+	rte_cpu_to_le_32(RX_PKT_CMPL_ERRORS_IP_CS_ERROR | \
+			 RX_PKT_CMPL_ERRORS_T_IP_CS_ERROR)
 
-#define RX_CMP_IP_CS_BITS	rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS2_IP_CS_CALC)
+#define RX_CMP_IP_CS_BITS	\
+	rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS2_IP_CS_CALC | \
+			 RX_PKT_CMPL_FLAGS2_T_IP_CS_CALC)
 
 #define RX_CMP_IP_CS_OK(rxcmp1)						\
 		(((rxcmp1)->flags2 & RX_CMP_IP_CS_BITS) &&	\
-- 
2.11.0

  parent reply	other threads:[~2018-05-06  6:37 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-06  6:36 [dpdk-stable] patch 'mbuf: fix Tx checksum offload API doc' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'mbuf: improve tunnel Tx offloads " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'app/crypto-perf: fix excess crypto device error' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'examples/l2fwd-crypto: fix the default aead assignments' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'crypto/zuc: do not set default op status' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'crypto/zuc: batch ops with same transform' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'crypto/dpaa2_sec: fix HMAC supported digest sizes' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'mk: fix make defconfig on FreeBSD' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'mempool: fix leak when no objects are populated' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'test: fix memory flags test for low NUMA nodes number' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'test/mempool: fix autotest retry' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'bus/pci: fix find device implementation' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'net/sfc: add missing Rx fini on RSS setup fail path' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'net/bnxt: set padding flags in Rx descriptor' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'net/bnxt: fix endianness of flag' " Yuanhan Liu
2018-05-06  6:36 ` Yuanhan Liu [this message]
2018-05-06  6:36 ` [dpdk-stable] patch 'net/bnxt: free memory allocated for VF filters' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'net/ixgbe: enable vector PMD for icc 32 bits' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'net/bnx2x: fix for PCI FLR after ungraceful exit' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'net/bnxt: avoid invalid vnic id in set L2 Rx mask' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'app/testpmd: fix command token' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'net/nfp: fix mbufs releasing when stop or close' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'net/tap: fix icc build' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'drivers/net: fix link autoneg value for virtual PMDs' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'net/sfc: process RSS settings on Rx configure step' " Yuanhan Liu
2018-05-06  6:36 ` [dpdk-stable] patch 'net/sfc: ignore spec bits not covered by mask' " Yuanhan Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180506063639.23196-16-yliu@fridaylinux.org \
    --to=yliu@fridaylinux.org \
    --cc=ajit.khaparde@broadcom.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).