[dpdk-stable] patch 'net/bnx2x: fix for PCI FLR after ungraceful exit' has been queued to LTS release 17.11.3

[Yuanhan Liu <yliu@fridaylinux.org>]

Hi,

FYI, your patch has been queued to LTS release 17.11.3

Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 05/09/18. So please
shout if anyone has objections.

Thanks.

	--yliu

---
>From 9e492ac6e7b204b97b13aaa102649f143aa54c0b Mon Sep 17 00:00:00 2001
From: Rasesh Mody <rasesh.mody@qlogic.com>
Date: Wed, 18 Apr 2018 13:15:08 -0700
Subject: [PATCH] net/bnx2x: fix for PCI FLR after ungraceful exit

[ upstream commit 66ba596aa6b5750b16549a322ef9a09fa7f0e3f6 ]

This patch provides a fix for PCI function level reset after an
ungraceful exit from an application. The fix is to enable internal
target read as part of device attach before getting device information
from device config space, device itself and shared memory. In addition
to that, add a 200ms delay for the recovery flow to complete.

Fixes: 540a211084a7 ("bnx2x: driver core")

Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
---
 drivers/net/bnx2x/bnx2x.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/bnx2x/bnx2x.c b/drivers/net/bnx2x/bnx2x.c
index 9394f6c50..7927d2a67 100644
--- a/drivers/net/bnx2x/bnx2x.c
+++ b/drivers/net/bnx2x/bnx2x.c
@@ -8289,16 +8289,6 @@ static int bnx2x_get_device_info(struct bnx2x_softc *sc)
 			REG_WR(sc, PXP2_REG_PGL_ADDR_90_F1, 0);
 			REG_WR(sc, PXP2_REG_PGL_ADDR_94_F1, 0);
 		}
-
-/*
- * Enable internal target-read (in case we are probed after PF
- * FLR). Must be done prior to any BAR read access. Only for
- * 57712 and up
- */
-		if (!CHIP_IS_E1x(sc)) {
-			REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ,
-			       1);
-		}
 	}
 
 	/* get the nvram size */
@@ -9675,7 +9665,17 @@ int bnx2x_attach(struct bnx2x_softc *sc)
 	bnx2x_init_rte(sc);
 
 	if (IS_PF(sc)) {
-/* get device info and set params */
+		/* Enable internal target-read (in case we are probed after PF
+		 * FLR). Must be done prior to any BAR read access. Only for
+		 * 57712 and up
+		 */
+		if (!CHIP_IS_E1x(sc)) {
+			REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ,
+			       1);
+			DELAY(200000);
+		}
+
+		/* get device info and set params */
 		if (bnx2x_get_device_info(sc) != 0) {
 			PMD_DRV_LOG(NOTICE, "getting device info");
 			return -ENXIO;
@@ -9684,7 +9684,7 @@ int bnx2x_attach(struct bnx2x_softc *sc)
 /* get phy settings from shmem and 'and' against admin settings */
 		bnx2x_get_phy_info(sc);
 	} else {
-/* Left mac of VF unfilled, PF should set it for VF */
+		/* Left mac of VF unfilled, PF should set it for VF */
 		memset(sc->link_params.mac_addr, 0, ETHER_ADDR_LEN);
 	}
 
-- 
2.11.0