From: Yuanhan Liu <yliu@fridaylinux.org>
To: David Hunt <david.hunt@intel.com>
Cc: Anatoly Burakov <anatoly.burakov@intel.com>,
dpdk stable <stable@dpdk.org>
Subject: [dpdk-stable] patch 'mk: fix make defconfig on FreeBSD' has been queued to LTS release 17.11.3
Date: Sun, 6 May 2018 14:36:21 +0800 [thread overview]
Message-ID: <20180506063639.23196-8-yliu@fridaylinux.org> (raw)
In-Reply-To: <20180506063639.23196-1-yliu@fridaylinux.org>
Hi,
FYI, your patch has been queued to LTS release 17.11.3
Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 05/09/18. So please
shout if anyone has objections.
Thanks.
--yliu
---
>From 63fd5f7696943eba4ba10652b6bd2fe61e834692 Mon Sep 17 00:00:00 2001
From: David Hunt <david.hunt@intel.com>
Date: Mon, 23 Apr 2018 14:09:02 +0100
Subject: [PATCH] mk: fix make defconfig on FreeBSD
[ upstream commit 6ace79505d326d05aaa3c57facca7ca8e1675b11 ]
On FreeBSD, make defconfig generates the config as
"defconfig_x86_64-bsdapp-", which does not resolve to any known
config file.
On FreeBSD, we get amd64 out of "uname -m", which was not handled by
the list of checks, but which now resolves to x86_64-native.
Then we run '$CC --version', and use grep -o with the list of known
compilers, and set to either gcc, icc or clang. Grep's '-o' option
returns the matched word rather than the whole line, making the
result easier to use.
The remaining code in the patch then takes ${compiler}, the "uname -m"
output and assembles them all together into a valid freebsd config name,
i.e. "defconfig_x86_64-native-bsdapp-clang".
Fixes: bce6c42c4ad5 ("mk: add sensible default target with defconfig")
Signed-off-by: David Hunt <david.hunt@intel.com>
Tested-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
mk/rte.sdkconfig.mk | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
diff --git a/mk/rte.sdkconfig.mk b/mk/rte.sdkconfig.mk
index 97363416a..59cf6b19b 100644
--- a/mk/rte.sdkconfig.mk
+++ b/mk/rte.sdkconfig.mk
@@ -64,7 +64,6 @@ notemplate:
@echo "use T=template from the following list:"
@$(MAKE) -rR showconfigs | sed 's,^, ,'
-
.PHONY: defconfig
defconfig:
@$(MAKE) config T=$(shell \
@@ -75,15 +74,25 @@ defconfig:
print "arm-armv7a"} \
else if ($$0 == "ppc64") { \
print "ppc_64-power8"} \
+ else if ($$0 == "amd64") { \
+ print "x86_64-native"} \
else { \
- printf "%s-native", $$0} }')-$(shell \
+ printf "%s-native", $$0} }' \
+ )-$(shell \
uname | awk '{ \
if ($$0 == "Linux") { \
print "linuxapp"} \
else { \
- print "bsdapp"} }')-$(shell \
- ${CC} -v 2>&1 | \
- grep " version " | cut -d ' ' -f 1)
+ print "bsdapp"} }' \
+ )-$(shell \
+ ${CC} --version | grep -o 'cc\|gcc\|icc\|clang' | awk \
+ '{ \
+ if ($$1 == "cc") { \
+ print "gcc" } \
+ else { \
+ print $$1 } \
+ }' \
+ )
.PHONY: config
ifeq ($(RTE_CONFIG_TEMPLATE),)
--
2.11.0
next prev parent reply other threads:[~2018-05-06 6:37 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-06 6:36 [dpdk-stable] patch 'mbuf: fix Tx checksum offload API doc' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'mbuf: improve tunnel Tx offloads " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'app/crypto-perf: fix excess crypto device error' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'examples/l2fwd-crypto: fix the default aead assignments' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'crypto/zuc: do not set default op status' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'crypto/zuc: batch ops with same transform' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'crypto/dpaa2_sec: fix HMAC supported digest sizes' " Yuanhan Liu
2018-05-06 6:36 ` Yuanhan Liu [this message]
2018-05-06 6:36 ` [dpdk-stable] patch 'mempool: fix leak when no objects are populated' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'test: fix memory flags test for low NUMA nodes number' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'test/mempool: fix autotest retry' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'bus/pci: fix find device implementation' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'net/sfc: add missing Rx fini on RSS setup fail path' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'net/bnxt: set padding flags in Rx descriptor' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'net/bnxt: fix endianness of flag' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'net/bnxt: fix Rx checksum flags for tunnel frames' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'net/bnxt: free memory allocated for VF filters' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'net/ixgbe: enable vector PMD for icc 32 bits' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'net/bnx2x: fix for PCI FLR after ungraceful exit' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'net/bnxt: avoid invalid vnic id in set L2 Rx mask' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'app/testpmd: fix command token' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'net/nfp: fix mbufs releasing when stop or close' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'net/tap: fix icc build' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'drivers/net: fix link autoneg value for virtual PMDs' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'net/sfc: process RSS settings on Rx configure step' " Yuanhan Liu
2018-05-06 6:36 ` [dpdk-stable] patch 'net/sfc: ignore spec bits not covered by mask' " Yuanhan Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180506063639.23196-8-yliu@fridaylinux.org \
--to=yliu@fridaylinux.org \
--cc=anatoly.burakov@intel.com \
--cc=david.hunt@intel.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).