patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Yongseok Koh <yskoh@mellanox.com>
To: yliu@fridaylinux.org
Cc: stable@dpdk.org, shahafs@mellanox.com,
	adrien.mazarguil@6wind.com, nelio.laranjeiro@6wind.com
Subject: [dpdk-stable] [PATCH 49/67] net/mlx5: fix flow director mask
Date: Mon,  4 Jun 2018 17:11:11 -0700	[thread overview]
Message-ID: <20180605001129.13184-50-yskoh@mellanox.com> (raw)
In-Reply-To: <20180605001129.13184-1-yskoh@mellanox.com>

From: Nélio Laranjeiro <nelio.laranjeiro@6wind.com>

[ upstream commit 3c0db1ab516498e96b42fa804a3cf14e0ccf7647 ]

During the transition to resurrect flow director on top of rte_flow, mask
handling was removed by mistake.

Fixes: 4c3e9bcdd52e ("net/mlx5: support flow director")
Cc: stable@dpdk.org

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
---
 drivers/net/mlx5/mlx5_flow.c | 56 +++++++++++++++++++++++++++++++++++++-------
 1 file changed, 48 insertions(+), 8 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index 9591009b6..46fc7c49e 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -483,9 +483,17 @@ struct mlx5_fdir {
 		struct rte_flow_item_ipv6 ipv6;
 	} l3;
 	union {
+		struct rte_flow_item_ipv4 ipv4;
+		struct rte_flow_item_ipv6 ipv6;
+	} l3_mask;
+	union {
 		struct rte_flow_item_udp udp;
 		struct rte_flow_item_tcp tcp;
 	} l4;
+	union {
+		struct rte_flow_item_udp udp;
+		struct rte_flow_item_tcp tcp;
+	} l4_mask;
 	struct rte_flow_action_queue queue;
 };
 
@@ -2687,6 +2695,8 @@ mlx5_fdir_filter_convert(struct rte_eth_dev *dev,
 {
 	struct priv *priv = dev->data->dev_private;
 	const struct rte_eth_fdir_input *input = &fdir_filter->input;
+	const struct rte_eth_fdir_masks *mask =
+		&dev->data->dev_conf.fdir_conf.mask;
 
 	/* Validate queue number. */
 	if (fdir_filter->action.rx_queue >= priv->rxqs_n) {
@@ -2733,29 +2743,43 @@ mlx5_fdir_filter_convert(struct rte_eth_dev *dev,
 			.type_of_service = input->flow.ip4_flow.tos,
 			.next_proto_id = input->flow.ip4_flow.proto,
 		};
+		attributes->l3_mask.ipv4.hdr = (struct ipv4_hdr){
+			.src_addr = mask->ipv4_mask.src_ip,
+			.dst_addr = mask->ipv4_mask.dst_ip,
+			.time_to_live = mask->ipv4_mask.ttl,
+			.type_of_service = mask->ipv4_mask.tos,
+			.next_proto_id = mask->ipv4_mask.proto,
+		};
 		attributes->items[1] = (struct rte_flow_item){
 			.type = RTE_FLOW_ITEM_TYPE_IPV4,
 			.spec = &attributes->l3,
-			.mask = &attributes->l3,
+			.mask = &attributes->l3_mask,
 		};
 		break;
 	case RTE_ETH_FLOW_NONFRAG_IPV6_UDP:
 	case RTE_ETH_FLOW_NONFRAG_IPV6_TCP:
 	case RTE_ETH_FLOW_NONFRAG_IPV6_OTHER:
 		attributes->l3.ipv6.hdr = (struct ipv6_hdr){
-			.hop_limits = input->flow.udp6_flow.ip.hop_limits,
-			.proto = input->flow.udp6_flow.ip.proto,
+			.hop_limits = input->flow.ipv6_flow.hop_limits,
+			.proto = input->flow.ipv6_flow.proto,
 		};
+
 		memcpy(attributes->l3.ipv6.hdr.src_addr,
 		       input->flow.ipv6_flow.src_ip,
 		       RTE_DIM(attributes->l3.ipv6.hdr.src_addr));
 		memcpy(attributes->l3.ipv6.hdr.dst_addr,
 		       input->flow.ipv6_flow.dst_ip,
 		       RTE_DIM(attributes->l3.ipv6.hdr.src_addr));
+		memcpy(attributes->l3_mask.ipv6.hdr.src_addr,
+		       mask->ipv6_mask.src_ip,
+		       RTE_DIM(attributes->l3_mask.ipv6.hdr.src_addr));
+		memcpy(attributes->l3_mask.ipv6.hdr.dst_addr,
+		       mask->ipv6_mask.dst_ip,
+		       RTE_DIM(attributes->l3_mask.ipv6.hdr.src_addr));
 		attributes->items[1] = (struct rte_flow_item){
 			.type = RTE_FLOW_ITEM_TYPE_IPV6,
 			.spec = &attributes->l3,
-			.mask = &attributes->l3,
+			.mask = &attributes->l3_mask,
 		};
 		break;
 	default:
@@ -2771,10 +2795,14 @@ mlx5_fdir_filter_convert(struct rte_eth_dev *dev,
 			.src_port = input->flow.udp4_flow.src_port,
 			.dst_port = input->flow.udp4_flow.dst_port,
 		};
+		attributes->l4_mask.udp.hdr = (struct udp_hdr){
+			.src_port = mask->src_port_mask,
+			.dst_port = mask->dst_port_mask,
+		};
 		attributes->items[2] = (struct rte_flow_item){
 			.type = RTE_FLOW_ITEM_TYPE_UDP,
 			.spec = &attributes->l4,
-			.mask = &attributes->l4,
+			.mask = &attributes->l4_mask,
 		};
 		break;
 	case RTE_ETH_FLOW_NONFRAG_IPV4_TCP:
@@ -2782,10 +2810,14 @@ mlx5_fdir_filter_convert(struct rte_eth_dev *dev,
 			.src_port = input->flow.tcp4_flow.src_port,
 			.dst_port = input->flow.tcp4_flow.dst_port,
 		};
+		attributes->l4_mask.tcp.hdr = (struct tcp_hdr){
+			.src_port = mask->src_port_mask,
+			.dst_port = mask->dst_port_mask,
+		};
 		attributes->items[2] = (struct rte_flow_item){
 			.type = RTE_FLOW_ITEM_TYPE_TCP,
 			.spec = &attributes->l4,
-			.mask = &attributes->l4,
+			.mask = &attributes->l4_mask,
 		};
 		break;
 	case RTE_ETH_FLOW_NONFRAG_IPV6_UDP:
@@ -2793,10 +2825,14 @@ mlx5_fdir_filter_convert(struct rte_eth_dev *dev,
 			.src_port = input->flow.udp6_flow.src_port,
 			.dst_port = input->flow.udp6_flow.dst_port,
 		};
+		attributes->l4_mask.udp.hdr = (struct udp_hdr){
+			.src_port = mask->src_port_mask,
+			.dst_port = mask->dst_port_mask,
+		};
 		attributes->items[2] = (struct rte_flow_item){
 			.type = RTE_FLOW_ITEM_TYPE_UDP,
 			.spec = &attributes->l4,
-			.mask = &attributes->l4,
+			.mask = &attributes->l4_mask,
 		};
 		break;
 	case RTE_ETH_FLOW_NONFRAG_IPV6_TCP:
@@ -2804,10 +2840,14 @@ mlx5_fdir_filter_convert(struct rte_eth_dev *dev,
 			.src_port = input->flow.tcp6_flow.src_port,
 			.dst_port = input->flow.tcp6_flow.dst_port,
 		};
+		attributes->l4_mask.tcp.hdr = (struct tcp_hdr){
+			.src_port = mask->src_port_mask,
+			.dst_port = mask->dst_port_mask,
+		};
 		attributes->items[2] = (struct rte_flow_item){
 			.type = RTE_FLOW_ITEM_TYPE_TCP,
 			.spec = &attributes->l4,
-			.mask = &attributes->l4,
+			.mask = &attributes->l4_mask,
 		};
 		break;
 	case RTE_ETH_FLOW_NONFRAG_IPV4_OTHER:
-- 
2.11.0

  parent reply	other threads:[~2018-06-05  0:13 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-05  0:10 [dpdk-stable] [PATCH 00/67] net/mlx5: backport patches for v17.11.3 LTS Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 01/67] net/mlx5: remove get priv internal function Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 02/67] net/mlx4: store RSS hash result in mbufs Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 03/67] net/mlx5: fix synchronization on polling Rx completions Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 04/67] net/mlx5: fix allocation when no memory on device NUMA node Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 05/67] net/mlx5: fix flow director conversion Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 06/67] net/mlx5: fix reception of multiple MAC addresses Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 07/67] net/mlx5: fix secondary process mempool registration Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 08/67] net/mlx5: remove assert un-accessible from secondary process Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 09/67] net/mlx5: warn for unsuccessful memory registration Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 10/67] net/mlx5: map UAR address around huge pages Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 11/67] net/mlx4: fix single port configuration Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 12/67] net/mlx4: fix broadcast Rx Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 13/67] net/mlx4: fix removal detection of stopped port Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 14/67] net/mlx5: fix CRC strip capability query Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 15/67] net/mlx5: fix close after start failure Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 16/67] net/mlx: control netdevices through ioctl only Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 17/67] net/mlx5: fix disabling Tx packet inlining Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 18/67] net/mlx5: fix sriov flag Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 19/67] net/mlx5: name parameters in function prototypes Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 20/67] net/mlx5: mark parameters with unused attribute Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 21/67] net/mlx5: normalize function prototypes Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 22/67] net/mlx5: add missing function documentation Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 23/67] net/mlx5: remove useless empty lines Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 24/67] net/mlx5: remove control path locks Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 25/67] net/mlx5: prefix all functions with mlx5 Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 26/67] net/mlx5: change non failing function return values Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 27/67] net/mlx5: standardize on negative errno values Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 28/67] net/mlx5: use port id in PMD log Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 29/67] net/mlx5: use dynamic logging Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 30/67] net/mlx5: remove kernel version check Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 31/67] net/mlx5: change pkt burst select function prototype Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 32/67] net/mlx5: fix link status behavior Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 33/67] net/mlx5: fix link status to use wait to complete Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 34/67] net/mlx5: change tunnel flow priority Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 35/67] net/mlx5: improve flow error explanation Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 36/67] net/mlx5: refuse empty VLAN flow specification Yongseok Koh
2018-06-05  0:10 ` [dpdk-stable] [PATCH 37/67] net/mlx5: fix icc build Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 38/67] net/mlx5: setup RSS regardless of queue count Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 39/67] net/mlx5: enforce RSS key length limitation Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 40/67] net/mlx5: fix RSS key length query Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 41/67] net/mlx4: fix a typo in header file Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 42/67] net/mlx5: remove 32-bit support Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 43/67] net/mlx5: remove excessive data prefetch Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 44/67] net/mlx5: fix link status initialization Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 45/67] net/mlx4: fix RSS resource leak in case of error Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 46/67] net/mlx5: fix RSS flow action bounds check Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 47/67] net/mlx5: fix invalid flow item check Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 48/67] net/mlx5: split L3/L4 in flow director Yongseok Koh
2018-06-05  0:11 ` Yongseok Koh [this message]
2018-06-05  0:11 ` [dpdk-stable] [PATCH 50/67] net/mlx5: fix flow director rule deletion crash Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 51/67] net/mlx4: fix Rx resource leak in case of error Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 52/67] net/mlx5: fix ethtool link setting call order Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 53/67] net/mlx5: fix socket connection return value Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 54/67] net/mlx5: add data-plane debug message macro Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 55/67] net/mlx5: fix probe return value polarity Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 56/67] net/mlx5: fix flow validation Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 57/67] net/mlx4: fix UDP flow rule limitation enforcement Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 58/67] net/mlx5: fix double free on error handling Yongseok Koh
2018-06-05  0:11 ` [dpdk-stable] [PATCH 59/67] net/mlx5: fix resource leak in case of error Yongseok Koh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180605001129.13184-50-yskoh@mellanox.com \
    --to=yskoh@mellanox.com \
    --cc=adrien.mazarguil@6wind.com \
    --cc=nelio.laranjeiro@6wind.com \
    --cc=shahafs@mellanox.com \
    --cc=stable@dpdk.org \
    --cc=yliu@fridaylinux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).