patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Chas Williams <3chas3@gmail.com>
To: stable@dpdk.org
Cc: bluca@debian.org, Keith Wiles <keith.wiles@intel.com>
Subject: [dpdk-stable] [PATCH 16.11 1/2] net/bonding: reduce slave starvation on Rx poll
Date: Sun,  7 Oct 2018 16:22:01 -0400	[thread overview]
Message-ID: <20181007202202.7648-2-3chas3@gmail.com> (raw)
In-Reply-To: <20181007202202.7648-1-3chas3@gmail.com>

From: Keith Wiles <keith.wiles@intel.com>

[ upstream commit ae2a04864a9a3878f74e66e3ae0fdebe77223a09 ]

When polling the bonded ports for RX packets the old driver would
always start with the first slave in the list. If the requested
number of packets is filled on the first port in a two port config
then the second port could be starved or have larger number of
missed packet errors.

The code attempts to start with a different slave each time RX poll
is done to help eliminate starvation of slave ports. The effect of
the previous code was much lower performance for two slaves in the
bond then just the one slave.

The performance drop was detected when the application can not poll
the rings of Rx packets fast enough and the packets per second for
two or more ports was at the threshold throughput of the application.
At this threshold the slaves would see very little or no drops in
the case of one slave. Then enable the second slave you would see
a large drop rate on the two slave bond and reduction in throughput.

Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
---
 drivers/net/bonding/rte_eth_bond_pmd.c     | 21 +++++++++++++++------
 drivers/net/bonding/rte_eth_bond_private.h |  3 ++-
 2 files changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/net/bonding/rte_eth_bond_pmd.c b/drivers/net/bonding/rte_eth_bond_pmd.c
index c672f0560..15e893240 100644
--- a/drivers/net/bonding/rte_eth_bond_pmd.c
+++ b/drivers/net/bonding/rte_eth_bond_pmd.c
@@ -1,7 +1,7 @@
 /*-
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
  *   All rights reserved.
  *
  *   Redistribution and use in source and binary forms, with or without
@@ -146,7 +146,7 @@ bond_ethdev_rx_burst_8023ad(void *queue, struct rte_mbuf **bufs,
 	const uint16_t ether_type_slow_be = rte_be_to_cpu_16(ETHER_TYPE_SLOW);
 	uint16_t num_rx_total = 0;	/* Total number of received packets */
 	uint8_t slaves[RTE_MAX_ETHPORTS];
-	uint8_t slave_count;
+	uint8_t slave_count, idx;
 
 	uint8_t collecting;  /* current slave collecting status */
 	const uint8_t promisc = internals->promiscuous_en;
@@ -160,12 +160,18 @@ bond_ethdev_rx_burst_8023ad(void *queue, struct rte_mbuf **bufs,
 	memcpy(slaves, internals->active_slaves,
 			sizeof(internals->active_slaves[0]) * slave_count);
 
+	idx = internals->active_slave;
+	if (idx >= slave_count) {
+		internals->active_slave = 0;
+		idx = 0;
+	}
 	for (i = 0; i < slave_count && num_rx_total < nb_pkts; i++) {
 		j = num_rx_total;
-		collecting = ACTOR_STATE(&mode_8023ad_ports[slaves[i]], COLLECTING);
+		collecting = ACTOR_STATE(&mode_8023ad_ports[slaves[idx]],
+					 COLLECTING);
 
 		/* Read packets from this slave */
-		num_rx_total += rte_eth_rx_burst(slaves[i], bd_rx_q->queue_id,
+		num_rx_total += rte_eth_rx_burst(slaves[idx], bd_rx_q->queue_id,
 				&bufs[num_rx_total], nb_pkts - num_rx_total);
 
 		for (k = j; k < 2 && k < num_rx_total; k++)
@@ -188,8 +194,8 @@ bond_ethdev_rx_burst_8023ad(void *queue, struct rte_mbuf **bufs,
 					!is_same_ether_addr(&bond_mac, &hdr->d_addr)))) {
 
 				if (hdr->ether_type == ether_type_slow_be) {
-					bond_mode_8023ad_handle_slow_pkt(internals, slaves[i],
-						bufs[j]);
+					bond_mode_8023ad_handle_slow_pkt(
+					    internals, slaves[idx], bufs[j]);
 				} else
 					rte_pktmbuf_free(bufs[j]);
 
@@ -202,8 +208,11 @@ bond_ethdev_rx_burst_8023ad(void *queue, struct rte_mbuf **bufs,
 			} else
 				j++;
 		}
+		if (unlikely(++idx == slave_count))
+			idx = 0;
 	}
 
+	internals->active_slave = idx;
 	return num_rx_total;
 }
 
diff --git a/drivers/net/bonding/rte_eth_bond_private.h b/drivers/net/bonding/rte_eth_bond_private.h
index d95d440b4..8c963ddb2 100644
--- a/drivers/net/bonding/rte_eth_bond_private.h
+++ b/drivers/net/bonding/rte_eth_bond_private.h
@@ -1,7 +1,7 @@
 /*-
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
  *   All rights reserved.
  *
  *   Redistribution and use in source and binary forms, with or without
@@ -144,6 +144,7 @@ struct bond_dev_private {
 	uint16_t nb_rx_queues;			/**< Total number of rx queues */
 	uint16_t nb_tx_queues;			/**< Total number of tx queues*/
 
+	uint8_t active_slave;		/**< Next active_slave to poll */
 	uint8_t active_slave_count;		/**< Number of active slaves */
 	uint8_t active_slaves[RTE_MAX_ETHPORTS];	/**< Active slave list */
 
-- 
2.14.4

  reply	other threads:[~2018-10-07 20:22 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-07 20:22 [dpdk-stable] [PATCH 16.11 0/2] net/bonding backports Chas Williams
2018-10-07 20:22 ` Chas Williams [this message]
2018-10-07 20:22 ` [dpdk-stable] [PATCH 16.11 2/2] net/bonding: fix Rx slave fairness Chas Williams
2018-10-08  9:00 ` [dpdk-stable] [PATCH 16.11 0/2] net/bonding backports Luca Boccassi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181007202202.7648-2-3chas3@gmail.com \
    --to=3chas3@gmail.com \
    --cc=bluca@debian.org \
    --cc=keith.wiles@intel.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).