[dpdk-stable] [PATCH v2] net/virtio: add Tx preparation

[dpdk-stable] [PATCH v2] net/virtio: add Tx preparation

[Andrew Rybchenko]

From: Dilshod Urazov <Dilshod.Urazov@oktetlabs.ru>

Virtio requires pseudo-header checksum in TCP/UDP checksum to do
offload, but it was lost when Tx prepare is introduced. Also
rte_validate_tx_offload() should be used to validate Tx offloads.

Also it is incorrect to do virtio_tso_fix_cksum() after prepend
to mbuf without taking prepended size into account, since layer 2/3/4
lengths provide incorrect offsets after prepend.

Fixes: 4fb7e803eb1a ("ethdev: add Tx preparation")
Cc: stable@dpdk.org

Signed-off-by: Dilshod Urazov <Dilshod.Urazov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
---
v2:
 - fix typo in E-mail address

 drivers/net/virtio/virtio_ethdev.c |  1 +
 drivers/net/virtio/virtio_ethdev.h |  3 +++
 drivers/net/virtio/virtio_rxtx.c   | 32 +++++++++++++++++++++++++++++++-
 3 files changed, 35 insertions(+), 1 deletion(-)

diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index c4570bb..97d3c29 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -1473,6 +1473,7 @@ static int virtio_dev_xstats_get_names(struct rte_eth_dev *dev,
 {
 	struct virtio_hw *hw = eth_dev->data->dev_private;
 
+	eth_dev->tx_pkt_prepare = virtio_xmit_pkts_prepare;
 	if (vtpci_packed_queue(hw)) {
 		PMD_INIT_LOG(INFO,
 			"virtio: using packed ring %s Tx path on port %u",
diff --git a/drivers/net/virtio/virtio_ethdev.h b/drivers/net/virtio/virtio_ethdev.h
index 45e96f3..20d3317 100644
--- a/drivers/net/virtio/virtio_ethdev.h
+++ b/drivers/net/virtio/virtio_ethdev.h
@@ -89,6 +89,9 @@ uint16_t virtio_recv_mergeable_pkts_packed(void *rx_queue,
 uint16_t virtio_recv_pkts_inorder(void *rx_queue,
 		struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
 
+uint16_t virtio_xmit_pkts_prepare(void *tx_queue, struct rte_mbuf **tx_pkts,
+		uint16_t nb_pkts);
+
 uint16_t virtio_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 		uint16_t nb_pkts);
 uint16_t virtio_xmit_pkts_packed(void *tx_queue, struct rte_mbuf **tx_pkts,
diff --git a/drivers/net/virtio/virtio_rxtx.c b/drivers/net/virtio/virtio_rxtx.c
index 1de2854..f2ca085 100644
--- a/drivers/net/virtio/virtio_rxtx.c
+++ b/drivers/net/virtio/virtio_rxtx.c
@@ -559,7 +559,6 @@
 
 		/* TCP Segmentation Offload */
 		if (cookie->ol_flags & PKT_TX_TCP_SEG) {
-			virtio_tso_fix_cksum(cookie);
 			hdr->gso_type = (cookie->ol_flags & PKT_TX_IPV6) ?
 				VIRTIO_NET_HDR_GSO_TCPV6 :
 				VIRTIO_NET_HDR_GSO_TCPV4;
@@ -1970,6 +1969,37 @@
 }
 
 uint16_t
+virtio_xmit_pkts_prepare(void *tx_queue __rte_unused, struct rte_mbuf **tx_pkts,
+			uint16_t nb_pkts)
+{
+	uint16_t nb_tx;
+	int error;
+
+	for (nb_tx = 0; nb_tx < nb_pkts; nb_tx++) {
+		struct rte_mbuf *m = tx_pkts[nb_tx];
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+		error = rte_validate_tx_offload(m);
+		if (unlikely(error)) {
+			rte_errno = -error;
+			break;
+		}
+#endif
+
+		error = rte_net_intel_cksum_prepare(m);
+		if (unlikely(error)) {
+			rte_errno = -error;
+			break;
+		}
+
+		if (m->ol_flags & PKT_TX_TCP_SEG)
+			virtio_tso_fix_cksum(m);
+	}
+
+	return nb_tx;
+}
+
+uint16_t
 virtio_xmit_pkts_packed(void *tx_queue, struct rte_mbuf **tx_pkts,
 			uint16_t nb_pkts)
 {
-- 
1.8.3.1

Re: [dpdk-stable] [PATCH v2] net/virtio: add Tx preparation

[Tiwei Bie]

Hi,

Thanks for the patch!

On Mon, Jun 03, 2019 at 07:50:05PM +0100, Andrew Rybchenko wrote:
[...]
>  uint16_t
> +virtio_xmit_pkts_prepare(void *tx_queue __rte_unused, struct rte_mbuf **tx_pkts,
> +			uint16_t nb_pkts)
> +{
> +	uint16_t nb_tx;
> +	int error;
> +
> +	for (nb_tx = 0; nb_tx < nb_pkts; nb_tx++) {
> +		struct rte_mbuf *m = tx_pkts[nb_tx];
> +
> +#ifdef RTE_LIBRTE_ETHDEV_DEBUG
> +		error = rte_validate_tx_offload(m);
> +		if (unlikely(error)) {
> +			rte_errno = -error;
> +			break;
> +		}
> +#endif
> +
> +		error = rte_net_intel_cksum_prepare(m);
> +		if (unlikely(error)) {
> +			rte_errno = -error;

It's a bit confusing here.
Based on the API doc of rte_eth_tx_prepare():

https://github.com/DPDK/dpdk/blob/7f9f46d6cef5b03681a3935b9a18378e08ca6f62/lib/librte_ethdev/rte_ethdev.h#L4360-L4362

It should set negative value to rte_errno when error happens,
and that's also what some other PMDs do, e.g.:

https://github.com/DPDK/dpdk/blob/7f9f46d6cef5b03681a3935b9a18378e08ca6f62/drivers/net/iavf/iavf_rxtx.c#L1701
https://github.com/DPDK/dpdk/blob/7f9f46d6cef5b03681a3935b9a18378e08ca6f62/drivers/net/iavf/iavf_rxtx.c#L1725
https://github.com/DPDK/dpdk/blob/7f9f46d6cef5b03681a3935b9a18378e08ca6f62/drivers/net/vmxnet3/vmxnet3_rxtx.c#L364

But some PMDs and rte_eth_tx_prepare() itself don't do this:

https://github.com/DPDK/dpdk/blob/7f9f46d6cef5b03681a3935b9a18378e08ca6f62/lib/librte_ethdev/rte_ethdev.h#L4377
https://github.com/DPDK/dpdk/blob/7f9f46d6cef5b03681a3935b9a18378e08ca6f62/lib/librte_ethdev/rte_ethdev.h#L4387


> +			break;
> +		}
> +
> +		if (m->ol_flags & PKT_TX_TCP_SEG)
> +			virtio_tso_fix_cksum(m);
> +	}
> +
> +	return nb_tx;
> +}
> +
> +uint16_t
>  virtio_xmit_pkts_packed(void *tx_queue, struct rte_mbuf **tx_pkts,
>  			uint16_t nb_pkts)
>  {
> -- 
> 1.8.3.1
> 

Re: [dpdk-stable] [PATCH v2] net/virtio: add Tx preparation

[Andrew Rybchenko]

Hi,

On 6/5/19 4:41 AM, Tiwei Bie wrote:
> Hi,
>
> Thanks for the patch!

More will follow. At least Tx checksum offload is broken when used together
with VLAN insertion since the later prepend to mbuf, but do nothing with
l2_len/outer_l2_len. We'll send a patch to move rte_vlan_insert()
to Tx prepare and suggest separate patch to update l2_len or outer_l2_len
when software VLAN insertion is done.

> On Mon, Jun 03, 2019 at 07:50:05PM +0100, Andrew Rybchenko wrote:
> [...]
>>   uint16_t
>> +virtio_xmit_pkts_prepare(void *tx_queue __rte_unused, struct rte_mbuf **tx_pkts,
>> +			uint16_t nb_pkts)
>> +{
>> +	uint16_t nb_tx;
>> +	int error;
>> +
>> +	for (nb_tx = 0; nb_tx < nb_pkts; nb_tx++) {
>> +		struct rte_mbuf *m = tx_pkts[nb_tx];
>> +
>> +#ifdef RTE_LIBRTE_ETHDEV_DEBUG
>> +		error = rte_validate_tx_offload(m);
>> +		if (unlikely(error)) {
>> +			rte_errno = -error;
>> +			break;
>> +		}
>> +#endif
>> +
>> +		error = rte_net_intel_cksum_prepare(m);
>> +		if (unlikely(error)) {
>> +			rte_errno = -error;
> It's a bit confusing here.
> Based on the API doc of rte_eth_tx_prepare():
>
> https://github.com/DPDK/dpdk/blob/7f9f46d6cef5b03681a3935b9a18378e08ca6f62/lib/librte_ethdev/rte_ethdev.h#L4360-L4362
>
> It should set negative value to rte_errno when error happens,

I'm pretty sure that it is a bug in documentation. rte_errno must be 
positive.
I'll send a patch to fix it.
Even the code just below sets positive rte_errno. Simple cases are very 
easy to find:
$ git grep 'rte_errno = E' | wc -l
557
$ git grep 'rte_errno = -E' | wc -l
50

A bit more complex cases which require careful review:
$ git grep -e 'rte_errno = -[a-z]' | wc -l
37
$ git grep -e 'rte_errno = [a-z]' | wc -l
150

Cases which look right from the first sight overweight wrong 3 times.
But it is still too many cases which are potentially wrong.

Andrew.

Re: [dpdk-stable] [PATCH v2] net/virtio: add Tx preparation

[Tiwei Bie]

On Wed, Jun 05, 2019 at 10:28:14AM +0300, Andrew Rybchenko wrote:
> Hi,
> 
> On 6/5/19 4:41 AM, Tiwei Bie wrote:
> 
>     Hi,
> 
>     Thanks for the patch!
> 
> 
> More will follow. At least Tx checksum offload is broken when used together
> with VLAN insertion since the later prepend to mbuf, but do nothing with
> l2_len/outer_l2_len. We'll send a patch to move rte_vlan_insert()
> to Tx prepare and suggest separate patch to update l2_len or outer_l2_len
> when software VLAN insertion is done.
> 

Thanks :)

> 
>     On Mon, Jun 03, 2019 at 07:50:05PM +0100, Andrew Rybchenko wrote:
>     [...]
> 
>          uint16_t
>         +virtio_xmit_pkts_prepare(void *tx_queue __rte_unused, struct rte_mbuf **tx_pkts,
>         +                       uint16_t nb_pkts)
>         +{
>         +       uint16_t nb_tx;
>         +       int error;
>         +
>         +       for (nb_tx = 0; nb_tx < nb_pkts; nb_tx++) {
>         +               struct rte_mbuf *m = tx_pkts[nb_tx];
>         +
>         +#ifdef RTE_LIBRTE_ETHDEV_DEBUG
>         +               error = rte_validate_tx_offload(m);
>         +               if (unlikely(error)) {
>         +                       rte_errno = -error;
>         +                       break;
>         +               }
>         +#endif
>         +
>         +               error = rte_net_intel_cksum_prepare(m);
>         +               if (unlikely(error)) {
>         +                       rte_errno = -error;
> 
>     It's a bit confusing here.
>     Based on the API doc of rte_eth_tx_prepare():
> 
>     https://github.com/DPDK/dpdk/blob/7f9f46d6cef5b03681a3935b9a18378e08ca6f62/lib/librte_ethdev/rte_ethdev.h#L4360-L4362
> 
>     It should set negative value to rte_errno when error happens,
> 
> 
> I'm pretty sure that it is a bug in documentation. rte_errno must be positive.

Yeah. Negative rte_errno looks confusing.

> I'll send a patch to fix it.
> Even the code just below sets positive rte_errno. Simple cases are very easy to
> find:
> $ git grep 'rte_errno = E' | wc -l
> 557
> $ git grep 'rte_errno = -E' | wc -l
> 50
> 
> A bit more complex cases which require careful review:
> $ git grep -e 'rte_errno = -[a-z]' | wc -l                                     
> 37
> $ git grep -e 'rte_errno = [a-z]' | wc -l
> 150
> 
> Cases which look right from the first sight overweight wrong 3 times.
> But it is still too many cases which are potentially wrong.
> 
> Andrew.

Thanks,
Tiwei

[dpdk-stable] [PATCH v3 1/2] net/virtio: add Tx preparation

[Andrew Rybchenko]

From: Dilshod Urazov <Dilshod.Urazov@oktetlabs.ru>

Virtio requires pseudo-header checksum in TCP/UDP checksum to do
offload, but it was lost when Tx prepare is introduced. Also
rte_validate_tx_offload() should be used to validate Tx offloads.

Also it is incorrect to do virtio_tso_fix_cksum() after prepend
to mbuf without taking prepended size into account, since layer 2/3/4
lengths provide incorrect offsets after prepend.

Fixes: 4fb7e803eb1a ("ethdev: add Tx preparation")
Cc: stable@dpdk.org

Signed-off-by: Dilshod Urazov <Dilshod.Urazov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
---
v3:
  - add a patch to move soft VLAN insertion to Tx prepare

 drivers/net/virtio/virtio_ethdev.c |  1 +
 drivers/net/virtio/virtio_ethdev.h |  3 +++
 drivers/net/virtio/virtio_rxtx.c   | 32 +++++++++++++++++++++++++++++-
 3 files changed, 35 insertions(+), 1 deletion(-)

diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index c4570bbf8..97d3c293e 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -1473,6 +1473,7 @@ set_rxtx_funcs(struct rte_eth_dev *eth_dev)
 {
 	struct virtio_hw *hw = eth_dev->data->dev_private;
 
+	eth_dev->tx_pkt_prepare = virtio_xmit_pkts_prepare;
 	if (vtpci_packed_queue(hw)) {
 		PMD_INIT_LOG(INFO,
 			"virtio: using packed ring %s Tx path on port %u",
diff --git a/drivers/net/virtio/virtio_ethdev.h b/drivers/net/virtio/virtio_ethdev.h
index 45e96f32b..20d331795 100644
--- a/drivers/net/virtio/virtio_ethdev.h
+++ b/drivers/net/virtio/virtio_ethdev.h
@@ -89,6 +89,9 @@ uint16_t virtio_recv_mergeable_pkts_packed(void *rx_queue,
 uint16_t virtio_recv_pkts_inorder(void *rx_queue,
 		struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
 
+uint16_t virtio_xmit_pkts_prepare(void *tx_queue, struct rte_mbuf **tx_pkts,
+		uint16_t nb_pkts);
+
 uint16_t virtio_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 		uint16_t nb_pkts);
 uint16_t virtio_xmit_pkts_packed(void *tx_queue, struct rte_mbuf **tx_pkts,
diff --git a/drivers/net/virtio/virtio_rxtx.c b/drivers/net/virtio/virtio_rxtx.c
index 1f1178467..07f8f47de 100644
--- a/drivers/net/virtio/virtio_rxtx.c
+++ b/drivers/net/virtio/virtio_rxtx.c
@@ -559,7 +559,6 @@ virtqueue_xmit_offload(struct virtio_net_hdr *hdr,
 
 		/* TCP Segmentation Offload */
 		if (cookie->ol_flags & PKT_TX_TCP_SEG) {
-			virtio_tso_fix_cksum(cookie);
 			hdr->gso_type = (cookie->ol_flags & PKT_TX_IPV6) ?
 				VIRTIO_NET_HDR_GSO_TCPV6 :
 				VIRTIO_NET_HDR_GSO_TCPV4;
@@ -1949,6 +1948,37 @@ virtio_recv_mergeable_pkts_packed(void *rx_queue,
 	return nb_rx;
 }
 
+uint16_t
+virtio_xmit_pkts_prepare(void *tx_queue __rte_unused, struct rte_mbuf **tx_pkts,
+			uint16_t nb_pkts)
+{
+	uint16_t nb_tx;
+	int error;
+
+	for (nb_tx = 0; nb_tx < nb_pkts; nb_tx++) {
+		struct rte_mbuf *m = tx_pkts[nb_tx];
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+		error = rte_validate_tx_offload(m);
+		if (unlikely(error)) {
+			rte_errno = -error;
+			break;
+		}
+#endif
+
+		error = rte_net_intel_cksum_prepare(m);
+		if (unlikely(error)) {
+			rte_errno = -error;
+			break;
+		}
+
+		if (m->ol_flags & PKT_TX_TCP_SEG)
+			virtio_tso_fix_cksum(m);
+	}
+
+	return nb_tx;
+}
+
 uint16_t
 virtio_xmit_pkts_packed(void *tx_queue, struct rte_mbuf **tx_pkts,
 			uint16_t nb_pkts)
-- 
2.17.1

[dpdk-stable] [PATCH v3 2/2] net/virtio: move VLAN tag insertion to Tx prepare

[Andrew Rybchenko]

From: Dilshod Urazov <Dilshod.Urazov@oktetlabs.ru>

VLAN tag insertion should be in Tx prepare, not in Tx burst functions.

Fixes: 4fb7e803eb1a ("ethdev: add Tx preparation")
Cc: stable@dpdk.org

Signed-off-by: Dilshod Urazov <Dilshod.Urazov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
---
 drivers/net/virtio/virtio_rxtx.c | 50 +++++++++-----------------------
 1 file changed, 14 insertions(+), 36 deletions(-)

diff --git a/drivers/net/virtio/virtio_rxtx.c b/drivers/net/virtio/virtio_rxtx.c
index 07f8f47de..dcce39e8c 100644
--- a/drivers/net/virtio/virtio_rxtx.c
+++ b/drivers/net/virtio/virtio_rxtx.c
@@ -1966,6 +1966,20 @@ virtio_xmit_pkts_prepare(void *tx_queue __rte_unused, struct rte_mbuf **tx_pkts,
 		}
 #endif
 
+		/* Do VLAN tag insertion */
+		if (unlikely(m->ol_flags & PKT_TX_VLAN_PKT)) {
+			error = rte_vlan_insert(&m);
+			/* rte_vlan_insert() may change pointer
+			 * even in the case of failure
+			 */
+			tx_pkts[nb_tx] = m;
+
+			if (unlikely(error)) {
+				rte_errno = -error;
+				break;
+			}
+		}
+
 		error = rte_net_intel_cksum_prepare(m);
 		if (unlikely(error)) {
 			rte_errno = -error;
@@ -1989,7 +2003,6 @@ virtio_xmit_pkts_packed(void *tx_queue, struct rte_mbuf **tx_pkts,
 	uint16_t hdr_size = hw->vtnet_hdr_size;
 	uint16_t nb_tx = 0;
 	bool in_order = hw->use_inorder_tx;
-	int error;
 
 	if (unlikely(hw->started == 0 && tx_pkts != hw->inject_pkts))
 		return nb_tx;
@@ -2007,17 +2020,6 @@ virtio_xmit_pkts_packed(void *tx_queue, struct rte_mbuf **tx_pkts,
 		struct rte_mbuf *txm = tx_pkts[nb_tx];
 		int can_push = 0, slots, need;
 
-		/* Do VLAN tag insertion */
-		if (unlikely(txm->ol_flags & PKT_TX_VLAN_PKT)) {
-			error = rte_vlan_insert(&txm);
-			if (unlikely(error)) {
-				rte_pktmbuf_free(txm);
-				continue;
-			}
-			/* vlan_insert may add a header mbuf */
-			tx_pkts[nb_tx] = txm;
-		}
-
 		/* optimize ring usage */
 		if ((vtpci_with_feature(hw, VIRTIO_F_ANY_LAYOUT) ||
 		      vtpci_with_feature(hw, VIRTIO_F_VERSION_1)) &&
@@ -2077,7 +2079,6 @@ virtio_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
 	struct virtio_hw *hw = vq->hw;
 	uint16_t hdr_size = hw->vtnet_hdr_size;
 	uint16_t nb_used, nb_tx = 0;
-	int error;
 
 	if (unlikely(hw->started == 0 && tx_pkts != hw->inject_pkts))
 		return nb_tx;
@@ -2096,17 +2097,6 @@ virtio_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
 		struct rte_mbuf *txm = tx_pkts[nb_tx];
 		int can_push = 0, use_indirect = 0, slots, need;
 
-		/* Do VLAN tag insertion */
-		if (unlikely(txm->ol_flags & PKT_TX_VLAN_PKT)) {
-			error = rte_vlan_insert(&txm);
-			if (unlikely(error)) {
-				rte_pktmbuf_free(txm);
-				continue;
-			}
-			/* vlan_insert may add a header mbuf */
-			tx_pkts[nb_tx] = txm;
-		}
-
 		/* optimize ring usage */
 		if ((vtpci_with_feature(hw, VIRTIO_F_ANY_LAYOUT) ||
 		      vtpci_with_feature(hw, VIRTIO_F_VERSION_1)) &&
@@ -2176,7 +2166,6 @@ virtio_xmit_pkts_inorder(void *tx_queue,
 	uint16_t hdr_size = hw->vtnet_hdr_size;
 	uint16_t nb_used, nb_avail, nb_tx = 0, nb_inorder_pkts = 0;
 	struct rte_mbuf *inorder_pkts[nb_pkts];
-	int error;
 
 	if (unlikely(hw->started == 0 && tx_pkts != hw->inject_pkts))
 		return nb_tx;
@@ -2201,17 +2190,6 @@ virtio_xmit_pkts_inorder(void *tx_queue,
 		struct rte_mbuf *txm = tx_pkts[nb_tx];
 		int slots, need;
 
-		/* Do VLAN tag insertion */
-		if (unlikely(txm->ol_flags & PKT_TX_VLAN_PKT)) {
-			error = rte_vlan_insert(&txm);
-			if (unlikely(error)) {
-				rte_pktmbuf_free(txm);
-				continue;
-			}
-			/* vlan_insert may add a header mbuf */
-			tx_pkts[nb_tx] = txm;
-		}
-
 		/* optimize ring usage */
 		if ((vtpci_with_feature(hw, VIRTIO_F_ANY_LAYOUT) ||
 		     vtpci_with_feature(hw, VIRTIO_F_VERSION_1)) &&
-- 
2.17.1

Re: [dpdk-stable] [PATCH v3 1/2] net/virtio: add Tx preparation

[Tiwei Bie]

On Sun, Jun 16, 2019 at 11:17:08AM +0100, Andrew Rybchenko wrote:
> From: Dilshod Urazov <Dilshod.Urazov@oktetlabs.ru>
> 
> Virtio requires pseudo-header checksum in TCP/UDP checksum to do
> offload, but it was lost when Tx prepare is introduced. Also
> rte_validate_tx_offload() should be used to validate Tx offloads.
> 
> Also it is incorrect to do virtio_tso_fix_cksum() after prepend
> to mbuf without taking prepended size into account, since layer 2/3/4
> lengths provide incorrect offsets after prepend.
> 
> Fixes: 4fb7e803eb1a ("ethdev: add Tx preparation")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Dilshod Urazov <Dilshod.Urazov@oktetlabs.ru>
> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
> ---

Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>

Thanks,
Tiwei

Re: [dpdk-stable] [PATCH v3 2/2] net/virtio: move VLAN tag insertion to Tx prepare

[Tiwei Bie]

On Sun, Jun 16, 2019 at 11:17:09AM +0100, Andrew Rybchenko wrote:
> From: Dilshod Urazov <Dilshod.Urazov@oktetlabs.ru>
> 
> VLAN tag insertion should be in Tx prepare, not in Tx burst functions.

Please add some details in the commit log.

Thanks,
Tiwei


> 
> Fixes: 4fb7e803eb1a ("ethdev: add Tx preparation")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Dilshod Urazov <Dilshod.Urazov@oktetlabs.ru>
> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
> ---
>  drivers/net/virtio/virtio_rxtx.c | 50 +++++++++-----------------------
>  1 file changed, 14 insertions(+), 36 deletions(-)
> 
> diff --git a/drivers/net/virtio/virtio_rxtx.c b/drivers/net/virtio/virtio_rxtx.c
> index 07f8f47de..dcce39e8c 100644
> --- a/drivers/net/virtio/virtio_rxtx.c
> +++ b/drivers/net/virtio/virtio_rxtx.c
> @@ -1966,6 +1966,20 @@ virtio_xmit_pkts_prepare(void *tx_queue __rte_unused, struct rte_mbuf **tx_pkts,
>  		}
>  #endif
>  
> +		/* Do VLAN tag insertion */
> +		if (unlikely(m->ol_flags & PKT_TX_VLAN_PKT)) {
> +			error = rte_vlan_insert(&m);
> +			/* rte_vlan_insert() may change pointer
> +			 * even in the case of failure
> +			 */
> +			tx_pkts[nb_tx] = m;
> +
> +			if (unlikely(error)) {
> +				rte_errno = -error;
> +				break;
> +			}
> +		}
> +
>  		error = rte_net_intel_cksum_prepare(m);
>  		if (unlikely(error)) {
>  			rte_errno = -error;
> @@ -1989,7 +2003,6 @@ virtio_xmit_pkts_packed(void *tx_queue, struct rte_mbuf **tx_pkts,
>  	uint16_t hdr_size = hw->vtnet_hdr_size;
>  	uint16_t nb_tx = 0;
>  	bool in_order = hw->use_inorder_tx;
> -	int error;
>  
>  	if (unlikely(hw->started == 0 && tx_pkts != hw->inject_pkts))
>  		return nb_tx;
> @@ -2007,17 +2020,6 @@ virtio_xmit_pkts_packed(void *tx_queue, struct rte_mbuf **tx_pkts,
>  		struct rte_mbuf *txm = tx_pkts[nb_tx];
>  		int can_push = 0, slots, need;
>  
> -		/* Do VLAN tag insertion */
> -		if (unlikely(txm->ol_flags & PKT_TX_VLAN_PKT)) {
> -			error = rte_vlan_insert(&txm);
> -			if (unlikely(error)) {
> -				rte_pktmbuf_free(txm);
> -				continue;
> -			}
> -			/* vlan_insert may add a header mbuf */
> -			tx_pkts[nb_tx] = txm;
> -		}
> -
>  		/* optimize ring usage */
>  		if ((vtpci_with_feature(hw, VIRTIO_F_ANY_LAYOUT) ||
>  		      vtpci_with_feature(hw, VIRTIO_F_VERSION_1)) &&
> @@ -2077,7 +2079,6 @@ virtio_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
>  	struct virtio_hw *hw = vq->hw;
>  	uint16_t hdr_size = hw->vtnet_hdr_size;
>  	uint16_t nb_used, nb_tx = 0;
> -	int error;
>  
>  	if (unlikely(hw->started == 0 && tx_pkts != hw->inject_pkts))
>  		return nb_tx;
> @@ -2096,17 +2097,6 @@ virtio_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
>  		struct rte_mbuf *txm = tx_pkts[nb_tx];
>  		int can_push = 0, use_indirect = 0, slots, need;
>  
> -		/* Do VLAN tag insertion */
> -		if (unlikely(txm->ol_flags & PKT_TX_VLAN_PKT)) {
> -			error = rte_vlan_insert(&txm);
> -			if (unlikely(error)) {
> -				rte_pktmbuf_free(txm);
> -				continue;
> -			}
> -			/* vlan_insert may add a header mbuf */
> -			tx_pkts[nb_tx] = txm;
> -		}
> -
>  		/* optimize ring usage */
>  		if ((vtpci_with_feature(hw, VIRTIO_F_ANY_LAYOUT) ||
>  		      vtpci_with_feature(hw, VIRTIO_F_VERSION_1)) &&
> @@ -2176,7 +2166,6 @@ virtio_xmit_pkts_inorder(void *tx_queue,
>  	uint16_t hdr_size = hw->vtnet_hdr_size;
>  	uint16_t nb_used, nb_avail, nb_tx = 0, nb_inorder_pkts = 0;
>  	struct rte_mbuf *inorder_pkts[nb_pkts];
> -	int error;
>  
>  	if (unlikely(hw->started == 0 && tx_pkts != hw->inject_pkts))
>  		return nb_tx;
> @@ -2201,17 +2190,6 @@ virtio_xmit_pkts_inorder(void *tx_queue,
>  		struct rte_mbuf *txm = tx_pkts[nb_tx];
>  		int slots, need;
>  
> -		/* Do VLAN tag insertion */
> -		if (unlikely(txm->ol_flags & PKT_TX_VLAN_PKT)) {
> -			error = rte_vlan_insert(&txm);
> -			if (unlikely(error)) {
> -				rte_pktmbuf_free(txm);
> -				continue;
> -			}
> -			/* vlan_insert may add a header mbuf */
> -			tx_pkts[nb_tx] = txm;
> -		}
> -
>  		/* optimize ring usage */
>  		if ((vtpci_with_feature(hw, VIRTIO_F_ANY_LAYOUT) ||
>  		     vtpci_with_feature(hw, VIRTIO_F_VERSION_1)) &&
> -- 
> 2.17.1
> 

[dpdk-stable] [PATCH v4 1/2] net/virtio: add Tx preparation

[Andrew Rybchenko]

From: Dilshod Urazov <Dilshod.Urazov@oktetlabs.ru>

Virtio requires pseudo-header checksum in TCP/UDP checksum to do
offload, but it was lost when Tx prepare is introduced. Also
rte_validate_tx_offload() should be used to validate Tx offloads.

Also it is incorrect to do virtio_tso_fix_cksum() after prepend
to mbuf without taking prepended size into account, since layer 2/3/4
lengths provide incorrect offsets after prepend.

Fixes: 4fb7e803eb1a ("ethdev: add Tx preparation")
Cc: stable@dpdk.org

Signed-off-by: Dilshod Urazov <Dilshod.Urazov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
---
 drivers/net/virtio/virtio_ethdev.c |  1 +
 drivers/net/virtio/virtio_ethdev.h |  3 +++
 drivers/net/virtio/virtio_rxtx.c   | 32 +++++++++++++++++++++++++++++-
 3 files changed, 35 insertions(+), 1 deletion(-)

diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index c4570bbf8..97d3c293e 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -1473,6 +1473,7 @@ set_rxtx_funcs(struct rte_eth_dev *eth_dev)
 {
 	struct virtio_hw *hw = eth_dev->data->dev_private;
 
+	eth_dev->tx_pkt_prepare = virtio_xmit_pkts_prepare;
 	if (vtpci_packed_queue(hw)) {
 		PMD_INIT_LOG(INFO,
 			"virtio: using packed ring %s Tx path on port %u",
diff --git a/drivers/net/virtio/virtio_ethdev.h b/drivers/net/virtio/virtio_ethdev.h
index 45e96f32b..20d331795 100644
--- a/drivers/net/virtio/virtio_ethdev.h
+++ b/drivers/net/virtio/virtio_ethdev.h
@@ -89,6 +89,9 @@ uint16_t virtio_recv_mergeable_pkts_packed(void *rx_queue,
 uint16_t virtio_recv_pkts_inorder(void *rx_queue,
 		struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
 
+uint16_t virtio_xmit_pkts_prepare(void *tx_queue, struct rte_mbuf **tx_pkts,
+		uint16_t nb_pkts);
+
 uint16_t virtio_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 		uint16_t nb_pkts);
 uint16_t virtio_xmit_pkts_packed(void *tx_queue, struct rte_mbuf **tx_pkts,
diff --git a/drivers/net/virtio/virtio_rxtx.c b/drivers/net/virtio/virtio_rxtx.c
index 1f1178467..07f8f47de 100644
--- a/drivers/net/virtio/virtio_rxtx.c
+++ b/drivers/net/virtio/virtio_rxtx.c
@@ -559,7 +559,6 @@ virtqueue_xmit_offload(struct virtio_net_hdr *hdr,
 
 		/* TCP Segmentation Offload */
 		if (cookie->ol_flags & PKT_TX_TCP_SEG) {
-			virtio_tso_fix_cksum(cookie);
 			hdr->gso_type = (cookie->ol_flags & PKT_TX_IPV6) ?
 				VIRTIO_NET_HDR_GSO_TCPV6 :
 				VIRTIO_NET_HDR_GSO_TCPV4;
@@ -1949,6 +1948,37 @@ virtio_recv_mergeable_pkts_packed(void *rx_queue,
 	return nb_rx;
 }
 
+uint16_t
+virtio_xmit_pkts_prepare(void *tx_queue __rte_unused, struct rte_mbuf **tx_pkts,
+			uint16_t nb_pkts)
+{
+	uint16_t nb_tx;
+	int error;
+
+	for (nb_tx = 0; nb_tx < nb_pkts; nb_tx++) {
+		struct rte_mbuf *m = tx_pkts[nb_tx];
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+		error = rte_validate_tx_offload(m);
+		if (unlikely(error)) {
+			rte_errno = -error;
+			break;
+		}
+#endif
+
+		error = rte_net_intel_cksum_prepare(m);
+		if (unlikely(error)) {
+			rte_errno = -error;
+			break;
+		}
+
+		if (m->ol_flags & PKT_TX_TCP_SEG)
+			virtio_tso_fix_cksum(m);
+	}
+
+	return nb_tx;
+}
+
 uint16_t
 virtio_xmit_pkts_packed(void *tx_queue, struct rte_mbuf **tx_pkts,
 			uint16_t nb_pkts)
-- 
2.17.1

[dpdk-stable] [PATCH v4 2/2] net/virtio: move VLAN tag insertion to Tx prepare

[Andrew Rybchenko]

From: Dilshod Urazov <Dilshod.Urazov@oktetlabs.ru>

VLAN tag insertion should be in Tx prepare, not in Tx burst functions.
One of Tx prepare goals is to be able to do preparations in advance
(possibliy on different CPU core) and then transmit it fast.
Also Tx prepare can report that a packet does not pass Tx offloads
check. E.g. has no enough headroom to insert VLAN header.

Fixes: 4fb7e803eb1a ("ethdev: add Tx preparation")
Cc: stable@dpdk.org

Signed-off-by: Dilshod Urazov <Dilshod.Urazov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
---
v4:
 - add more details to commit log

 drivers/net/virtio/virtio_rxtx.c | 50 +++++++++-----------------------
 1 file changed, 14 insertions(+), 36 deletions(-)

diff --git a/drivers/net/virtio/virtio_rxtx.c b/drivers/net/virtio/virtio_rxtx.c
index 07f8f47de..dcce39e8c 100644
--- a/drivers/net/virtio/virtio_rxtx.c
+++ b/drivers/net/virtio/virtio_rxtx.c
@@ -1966,6 +1966,20 @@ virtio_xmit_pkts_prepare(void *tx_queue __rte_unused, struct rte_mbuf **tx_pkts,
 		}
 #endif
 
+		/* Do VLAN tag insertion */
+		if (unlikely(m->ol_flags & PKT_TX_VLAN_PKT)) {
+			error = rte_vlan_insert(&m);
+			/* rte_vlan_insert() may change pointer
+			 * even in the case of failure
+			 */
+			tx_pkts[nb_tx] = m;
+
+			if (unlikely(error)) {
+				rte_errno = -error;
+				break;
+			}
+		}
+
 		error = rte_net_intel_cksum_prepare(m);
 		if (unlikely(error)) {
 			rte_errno = -error;
@@ -1989,7 +2003,6 @@ virtio_xmit_pkts_packed(void *tx_queue, struct rte_mbuf **tx_pkts,
 	uint16_t hdr_size = hw->vtnet_hdr_size;
 	uint16_t nb_tx = 0;
 	bool in_order = hw->use_inorder_tx;
-	int error;
 
 	if (unlikely(hw->started == 0 && tx_pkts != hw->inject_pkts))
 		return nb_tx;
@@ -2007,17 +2020,6 @@ virtio_xmit_pkts_packed(void *tx_queue, struct rte_mbuf **tx_pkts,
 		struct rte_mbuf *txm = tx_pkts[nb_tx];
 		int can_push = 0, slots, need;
 
-		/* Do VLAN tag insertion */
-		if (unlikely(txm->ol_flags & PKT_TX_VLAN_PKT)) {
-			error = rte_vlan_insert(&txm);
-			if (unlikely(error)) {
-				rte_pktmbuf_free(txm);
-				continue;
-			}
-			/* vlan_insert may add a header mbuf */
-			tx_pkts[nb_tx] = txm;
-		}
-
 		/* optimize ring usage */
 		if ((vtpci_with_feature(hw, VIRTIO_F_ANY_LAYOUT) ||
 		      vtpci_with_feature(hw, VIRTIO_F_VERSION_1)) &&
@@ -2077,7 +2079,6 @@ virtio_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
 	struct virtio_hw *hw = vq->hw;
 	uint16_t hdr_size = hw->vtnet_hdr_size;
 	uint16_t nb_used, nb_tx = 0;
-	int error;
 
 	if (unlikely(hw->started == 0 && tx_pkts != hw->inject_pkts))
 		return nb_tx;
@@ -2096,17 +2097,6 @@ virtio_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
 		struct rte_mbuf *txm = tx_pkts[nb_tx];
 		int can_push = 0, use_indirect = 0, slots, need;
 
-		/* Do VLAN tag insertion */
-		if (unlikely(txm->ol_flags & PKT_TX_VLAN_PKT)) {
-			error = rte_vlan_insert(&txm);
-			if (unlikely(error)) {
-				rte_pktmbuf_free(txm);
-				continue;
-			}
-			/* vlan_insert may add a header mbuf */
-			tx_pkts[nb_tx] = txm;
-		}
-
 		/* optimize ring usage */
 		if ((vtpci_with_feature(hw, VIRTIO_F_ANY_LAYOUT) ||
 		      vtpci_with_feature(hw, VIRTIO_F_VERSION_1)) &&
@@ -2176,7 +2166,6 @@ virtio_xmit_pkts_inorder(void *tx_queue,
 	uint16_t hdr_size = hw->vtnet_hdr_size;
 	uint16_t nb_used, nb_avail, nb_tx = 0, nb_inorder_pkts = 0;
 	struct rte_mbuf *inorder_pkts[nb_pkts];
-	int error;
 
 	if (unlikely(hw->started == 0 && tx_pkts != hw->inject_pkts))
 		return nb_tx;
@@ -2201,17 +2190,6 @@ virtio_xmit_pkts_inorder(void *tx_queue,
 		struct rte_mbuf *txm = tx_pkts[nb_tx];
 		int slots, need;
 
-		/* Do VLAN tag insertion */
-		if (unlikely(txm->ol_flags & PKT_TX_VLAN_PKT)) {
-			error = rte_vlan_insert(&txm);
-			if (unlikely(error)) {
-				rte_pktmbuf_free(txm);
-				continue;
-			}
-			/* vlan_insert may add a header mbuf */
-			tx_pkts[nb_tx] = txm;
-		}
-
 		/* optimize ring usage */
 		if ((vtpci_with_feature(hw, VIRTIO_F_ANY_LAYOUT) ||
 		     vtpci_with_feature(hw, VIRTIO_F_VERSION_1)) &&
-- 
2.17.1

Re: [dpdk-stable] [PATCH v3 2/2] net/virtio: move VLAN tag insertion to Tx prepare

[Andrew Rybchenko]

On 6/17/19 11:54 AM, Tiwei Bie wrote:
> On Sun, Jun 16, 2019 at 11:17:09AM +0100, Andrew Rybchenko wrote:
>> From: Dilshod Urazov <Dilshod.Urazov@oktetlabs.ru>
>>
>> VLAN tag insertion should be in Tx prepare, not in Tx burst functions.
> Please add some details in the commit log.

Done, please, see v4.

Also, please, note that the following patch [1] fixes the problem with
Tx checksum offload after VLAN insertion.

Andrew.

[1] https://patches.dpdk.org/patch/54830/

Re: [dpdk-stable] [PATCH v4 2/2] net/virtio: move VLAN tag insertion to Tx prepare

[Tiwei Bie]

On Mon, Jun 17, 2019 at 12:31:38PM +0100, Andrew Rybchenko wrote:
> From: Dilshod Urazov <Dilshod.Urazov@oktetlabs.ru>
> 
> VLAN tag insertion should be in Tx prepare, not in Tx burst functions.
> One of Tx prepare goals is to be able to do preparations in advance
> (possibliy on different CPU core) and then transmit it fast.
> Also Tx prepare can report that a packet does not pass Tx offloads
> check. E.g. has no enough headroom to insert VLAN header.
> 
> Fixes: 4fb7e803eb1a ("ethdev: add Tx preparation")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Dilshod Urazov <Dilshod.Urazov@oktetlabs.ru>
> Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
> ---
> v4:
>  - add more details to commit log
> 
>  drivers/net/virtio/virtio_rxtx.c | 50 +++++++++-----------------------
>  1 file changed, 14 insertions(+), 36 deletions(-)

Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>

Thanks,
Tiwei

Re: [dpdk-stable] [PATCH v4 1/2] net/virtio: add Tx preparation

[Maxime Coquelin]

On 6/17/19 1:31 PM, Andrew Rybchenko wrote:
> From: Dilshod Urazov<Dilshod.Urazov@oktetlabs.ru>
> 
> Virtio requires pseudo-header checksum in TCP/UDP checksum to do
> offload, but it was lost when Tx prepare is introduced. Also
> rte_validate_tx_offload() should be used to validate Tx offloads.
> 
> Also it is incorrect to do virtio_tso_fix_cksum() after prepend
> to mbuf without taking prepended size into account, since layer 2/3/4
> lengths provide incorrect offsets after prepend.
> 
> Fixes: 4fb7e803eb1a ("ethdev: add Tx preparation")
> Cc:stable@dpdk.org
> 
> Signed-off-by: Dilshod Urazov<Dilshod.Urazov@oktetlabs.ru>
> Signed-off-by: Andrew Rybchenko<arybchenko@solarflare.com>
> Reviewed-by: Tiwei Bie<tiwei.bie@intel.com>
> ---
>   drivers/net/virtio/virtio_ethdev.c |  1 +
>   drivers/net/virtio/virtio_ethdev.h |  3 +++
>   drivers/net/virtio/virtio_rxtx.c   | 32 +++++++++++++++++++++++++++++-
>   3 files changed, 35 insertions(+), 1 deletion(-)


Applied to dpdk-next-virtio/master.

Thanks,
Maxime

Re: [dpdk-stable] [PATCH v4 2/2] net/virtio: move VLAN tag insertion to Tx prepare

[Maxime Coquelin]

On 6/17/19 1:31 PM, Andrew Rybchenko wrote:
> From: Dilshod Urazov<Dilshod.Urazov@oktetlabs.ru>
> 
> VLAN tag insertion should be in Tx prepare, not in Tx burst functions.
> One of Tx prepare goals is to be able to do preparations in advance
> (possibliy on different CPU core) and then transmit it fast.
> Also Tx prepare can report that a packet does not pass Tx offloads
> check. E.g. has no enough headroom to insert VLAN header.
> 
> Fixes: 4fb7e803eb1a ("ethdev: add Tx preparation")
> Cc:stable@dpdk.org
> 
> Signed-off-by: Dilshod Urazov<Dilshod.Urazov@oktetlabs.ru>
> Signed-off-by: Andrew Rybchenko<arybchenko@solarflare.com>
> ---
> v4:
>   - add more details to commit log
> 
>   drivers/net/virtio/virtio_rxtx.c | 50 +++++++++-----------------------
>   1 file changed, 14 insertions(+), 36 deletions(-)


Applied to dpdk-next-virtio/master.

Thanks,
Maxime