patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Rasesh Mody <rmody@marvell.com>
To: <dev@dpdk.org>, <jerinj@marvell.com>, <ferruh.yigit@intel.com>
Cc: Rasesh Mody <rmody@marvell.com>,
	<GR-Everest-DPDK-Dev@marvell.com>, <stable@dpdk.org>,
	Igor Russkikh <irusskikh@marvell.com>
Subject: [dpdk-stable] [PATCH v3 2/2] net/qede: fix port reconfiguration
Date: Thu, 14 May 2020 23:34:19 -0700	[thread overview]
Message-ID: <20200515063419.14525-2-rmody@marvell.com> (raw)
In-Reply-To: <20200505030943.1091-1-rmody@marvell.com>

This patch fixes deallocation of all fastpath resources unconditionally,
when re-configuring the device. When re-allocating resources PMD depends
on application to explicitly setup the Rx/Tx queue.

Deallocation of all the resources is only required if the Rx/Tx queue
configuration changes. For other scenarios like KNI MTU change we'd keep
existing configuration.

Fixes: 8de0c4201926 ("net/qede: fix odd number of queues usage in 100G
mode")
Fixes: dd28bc8c6ef4 ("net/qede: fix VF port creation sequence")
Cc: stable@dpdk.org

Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
---
 drivers/net/qede/qede_ethdev.c | 19 +++++++++++++------
 drivers/net/qede/qede_rxtx.c   |  4 +++-
 2 files changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/net/qede/qede_ethdev.c b/drivers/net/qede/qede_ethdev.c
index d3d916e81..c4f8f1258 100644
--- a/drivers/net/qede/qede_ethdev.c
+++ b/drivers/net/qede/qede_ethdev.c
@@ -1273,6 +1273,8 @@ static int qede_dev_configure(struct rte_eth_dev *eth_dev)
 	struct qede_dev *qdev = QEDE_INIT_QDEV(eth_dev);
 	struct ecore_dev *edev = QEDE_INIT_EDEV(qdev);
 	struct rte_eth_rxmode *rxmode = &eth_dev->data->dev_conf.rxmode;
+	uint8_t num_rxqs;
+	uint8_t num_txqs;
 	int ret;
 
 	PMD_INIT_FUNC_TRACE(edev);
@@ -1305,12 +1307,17 @@ static int qede_dev_configure(struct rte_eth_dev *eth_dev)
 	if (qede_check_fdir_support(eth_dev))
 		return -ENOTSUP;
 
-	qede_dealloc_fp_resc(eth_dev);
-	qdev->num_tx_queues = eth_dev->data->nb_tx_queues * edev->num_hwfns;
-	qdev->num_rx_queues = eth_dev->data->nb_rx_queues * edev->num_hwfns;
-
-	if (qede_alloc_fp_resc(qdev))
-		return -ENOMEM;
+	/* Allocate/reallocate fastpath resources only for new queue config */
+	num_txqs = eth_dev->data->nb_tx_queues * edev->num_hwfns;
+	num_rxqs = eth_dev->data->nb_rx_queues * edev->num_hwfns;
+	if (qdev->num_tx_queues != num_txqs ||
+	    qdev->num_rx_queues != num_rxqs) {
+		qede_dealloc_fp_resc(eth_dev);
+		qdev->num_tx_queues = num_txqs;
+		qdev->num_rx_queues = num_rxqs;
+		if (qede_alloc_fp_resc(qdev))
+			return -ENOMEM;
+	}
 
 	/* If jumbo enabled adjust MTU */
 	if (rxmode->offloads & DEV_RX_OFFLOAD_JUMBO_FRAME)
diff --git a/drivers/net/qede/qede_rxtx.c b/drivers/net/qede/qede_rxtx.c
index b81788ca4..9878ba50e 100644
--- a/drivers/net/qede/qede_rxtx.c
+++ b/drivers/net/qede/qede_rxtx.c
@@ -593,12 +593,14 @@ qede_alloc_mem_sb(struct qede_dev *qdev, struct ecore_sb_info *sb_info,
 
 int qede_alloc_fp_resc(struct qede_dev *qdev)
 {
-	struct ecore_dev *edev = &qdev->edev;
+	struct ecore_dev *edev = QEDE_INIT_EDEV(qdev);
 	struct qede_fastpath *fp;
 	uint32_t num_sbs;
 	uint16_t sb_idx;
 	int i;
 
+	PMD_INIT_FUNC_TRACE(edev);
+
 	if (IS_VF(edev))
 		ecore_vf_get_num_sbs(ECORE_LEADING_HWFN(edev), &num_sbs);
 	else
-- 
2.18.0


      parent reply	other threads:[~2020-05-15  6:35 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-05  3:09 [dpdk-stable] [PATCH 1/2] net/qede: fix assignment of Rx/Tx handlers Rasesh Mody
2020-05-05  9:01 ` Ferruh Yigit
2020-05-06  2:34   ` [dpdk-stable] [EXT] " Rasesh Mody
2020-05-14  4:09 ` [dpdk-stable] [PATCH v2 " Rasesh Mody
2020-05-14  4:09 ` [dpdk-stable] [PATCH v2 2/2] examples/kni: fix MTU change to setup Tx queue Rasesh Mody
2020-05-14 15:33   ` Ferruh Yigit
2020-05-15 11:29   ` Ferruh Yigit
2020-05-19 16:31     ` [dpdk-stable] [dpdk-dev] " Thomas Monjalon
2020-05-15  6:34 ` [dpdk-stable] [PATCH v3 1/2] net/qede: fix assignment of Rx/Tx handlers Rasesh Mody
2020-05-15 12:26   ` [dpdk-stable] [dpdk-dev] " Jerin Jacob
2020-05-15  6:34 ` Rasesh Mody [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200515063419.14525-2-rmody@marvell.com \
    --to=rmody@marvell.com \
    --cc=GR-Everest-DPDK-Dev@marvell.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=irusskikh@marvell.com \
    --cc=jerinj@marvell.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).