patches for DPDK stable branches
 help / color / Atom feed
From: Haiyue Wang <haiyue.wang@intel.com>
To: dev@dpdk.org, anatoly.burakov@intel.com
Cc: Haiyue Wang <haiyue.wang@intel.com>, stable@dpdk.org
Subject: [dpdk-stable] [PATCH v2] bus/pci: fix VF bus error for memory access
Date: Mon, 22 Jun 2020 14:30:29 +0800
Message-ID: <20200622063029.95985-1-haiyue.wang@intel.com> (raw)
In-Reply-To: <20200621174035.6858-1-haiyue.wang@intel.com>

To fix CVE-2020-12888, the linux vfio-pci module will invalidate mmaps
and block MMIO access on disabled memory, it will send a SIGBUS to the
application:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=abafbc551fddede3e0a08dee1dcde08fc0eb8476

When the application opens the vfio PCI device, the vfio-pci module will
enable the memory bus command through PCI read/write access. According
to the PCIe specification, for VF, the 'Memory Space Enable' is always
zero:

             Table 9-13 Command Register Changes

Bit Location | PF and VF Register Differences | PF         | VF
             | From Base                      | Attributes | Attributes
-------------+--------------------------------+------------+-----------
             | Memory Space Enable - Does not |            |
             | apply to VFs. Must be hardwired|  Base      |  0b
     1       | to 0b for VFs. VF Memory Space |            |
             | is controlled by the VF MSE bit|            |
             | in the VF Control register.    |            |
-------------+--------------------------------+------------+-----------

Then the vfio-pci module initializes its own virtual PCI config space
data ('vconfig') by reading the VF's physical PCI config space, so the
'Memory Space Enable' bit in vconfig will also have 0b value. This will
make the vfio-pci find that the BAR memory is disabled, and the SIGBUS
will be triggerred if access these BARs.

So it needs to enable PCI bus memory command explicitly to avoid access
on disabled memory, which will call vfio-pci virtual PCI read/write API
to set the 'Memory Space Enable' in vconfig space to 1b.

Fixes: 33604c31354a ("vfio: refactor PCI BAR mapping")
Cc: stable@dpdk.org

Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
---
v2: Rewrite the commit log, and put the link into it even it is long.
---
 drivers/bus/pci/linux/pci_vfio.c | 37 ++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/drivers/bus/pci/linux/pci_vfio.c b/drivers/bus/pci/linux/pci_vfio.c
index 64cd84a68..9b6e45da5 100644
--- a/drivers/bus/pci/linux/pci_vfio.c
+++ b/drivers/bus/pci/linux/pci_vfio.c
@@ -149,6 +149,38 @@ pci_vfio_get_msix_bar(int fd, struct pci_msix_table *msix_table)
 	return 0;
 }
 
+/* enable PCI bus memory command */
+static int
+pci_vfio_enable_bus_memory(int dev_fd)
+{
+	uint16_t cmd;
+	int ret;
+
+	ret = pread64(dev_fd, &cmd, sizeof(cmd),
+		      VFIO_GET_REGION_ADDR(VFIO_PCI_CONFIG_REGION_INDEX) +
+		      PCI_COMMAND);
+
+	if (ret != sizeof(cmd)) {
+		RTE_LOG(ERR, EAL, "Cannot read command from PCI config space!\n");
+		return -1;
+	}
+
+	if (cmd & PCI_COMMAND_MEMORY)
+		return 0;
+
+	cmd |= PCI_COMMAND_MEMORY;
+	ret = pwrite64(dev_fd, &cmd, sizeof(cmd),
+		       VFIO_GET_REGION_ADDR(VFIO_PCI_CONFIG_REGION_INDEX) +
+		       PCI_COMMAND);
+
+	if (ret != sizeof(cmd)) {
+		RTE_LOG(ERR, EAL, "Cannot write command to PCI config space!\n");
+		return -1;
+	}
+
+	return 0;
+}
+
 /* set PCI bus mastering */
 static int
 pci_vfio_set_bus_master(int dev_fd, bool op)
@@ -427,6 +459,11 @@ pci_rte_vfio_setup_device(struct rte_pci_device *dev, int vfio_dev_fd)
 		return -1;
 	}
 
+	if (pci_vfio_enable_bus_memory(vfio_dev_fd)) {
+		RTE_LOG(ERR, EAL, "Cannot enable bus memory command!\n");
+		return -1;
+	}
+
 	/* set bus mastering for the device */
 	if (pci_vfio_set_bus_master(vfio_dev_fd, true)) {
 		RTE_LOG(ERR, EAL, "Cannot set up bus mastering!\n");
-- 
2.27.0


  reply index

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-21 17:40 [dpdk-stable] [PATCH v1] " Haiyue Wang
2020-06-22  6:30 ` Haiyue Wang [this message]
2020-06-22  8:52   ` [dpdk-stable] [PATCH v2] " Burakov, Anatoly
2020-06-22 11:25     ` Wang, Haiyue
2020-06-22 11:13 ` [dpdk-stable] [PATCH v3] " Haiyue Wang
2020-06-22 12:11   ` Burakov, Anatoly
2020-06-23 15:12   ` [dpdk-stable] [dpdk-dev] " Harman Kalra
2020-06-24 20:01   ` David Marchand
2020-06-25  4:01     ` Wang, Haiyue
2020-06-25  3:50 ` [dpdk-stable] [PATCH v4] " Haiyue Wang
2020-06-25 14:09   ` David Marchand
2020-06-25 16:45     ` Kevin Traynor
2020-06-25 18:33       ` Wang, Haiyue
2020-06-26  9:10         ` Kevin Traynor
2020-06-26  9:17         ` David Marchand
2020-06-26 14:14           ` Wang, Haiyue

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200622063029.95985-1-haiyue.wang@intel.com \
    --to=haiyue.wang@intel.com \
    --cc=anatoly.burakov@intel.com \
    --cc=dev@dpdk.org \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

patches for DPDK stable branches

Archives are clonable:
	git clone --mirror http://inbox.dpdk.org/stable/0 stable/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 stable stable/ http://inbox.dpdk.org/stable \
		stable@dpdk.org
	public-inbox-index stable


Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.stable


AGPL code for this site: git clone https://public-inbox.org/ public-inbox