patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Kevin Traynor <ktraynor@redhat.com>
To: Michael Baum <michaelba@mellanox.com>
Cc: Matan Azrad <matan@mellanox.com>, dpdk stable <stable@dpdk.org>
Subject: [dpdk-stable] patch 'net/mlx4: optimize stack memory size in probe' has been queued to LTS release 18.11.10
Date: Fri, 28 Aug 2020 11:12:55 +0100	[thread overview]
Message-ID: <20200828101308.223767-29-ktraynor@redhat.com> (raw)
In-Reply-To: <20200828101308.223767-1-ktraynor@redhat.com>

Hi,

FYI, your patch has been queued to LTS release 18.11.10

Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 09/02/20. So please
shout if anyone has objections.

Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.

Queued patches are on a temporary branch at:
https://github.com/kevintraynor/dpdk-stable-queue

This queued commit can be viewed at:
https://github.com/kevintraynor/dpdk-stable-queue/commit/a1801c7bb86a0b24d5538aabb6af36100c78976c

Thanks.

Kevin.

---
From a1801c7bb86a0b24d5538aabb6af36100c78976c Mon Sep 17 00:00:00 2001
From: Michael Baum <michaelba@mellanox.com>
Date: Tue, 21 Jul 2020 12:01:09 +0000
Subject: [PATCH] net/mlx4: optimize stack memory size in probe

[ upstream commit 4a28e831c97cd02e1646337ea6391288f7e8db05 ]

The mlx4_pci_probe function sets a pointer to the mlx4_priv structure,
and during that function fills its fields one by one with relevant
values.

It wants to put a value in the intr_handle field that has all its fields
zero except 2. To do so, it initializes a local struct rte_intr_handle
type variable and updates it only 2 fields and assigns it into the
appropriate field. However, it initializes a very large structure on the
stack while not at all certain that this place exists and in any case it
is very wasteful.

Reset all fields directly to the pointer by memset, then format the 2
fields to the relevant values.

Fixes: 63c2f23c852a ("net/mlx4: use a single interrupt handle")

Signed-off-by: Michael Baum <michaelba@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
---
 drivers/net/mlx4/mlx4.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/mlx4/mlx4.c b/drivers/net/mlx4/mlx4.c
index 5e22ee4381..58152bb97a 100644
--- a/drivers/net/mlx4/mlx4.c
+++ b/drivers/net/mlx4/mlx4.c
@@ -795,8 +795,7 @@ mlx4_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
 		rte_eth_copy_pci_info(eth_dev, pci_dev);
 		/* Initialize local interrupt handle for current port. */
-		priv->intr_handle = (struct rte_intr_handle){
-			.fd = -1,
-			.type = RTE_INTR_HANDLE_EXT,
-		};
+		memset(&priv->intr_handle, 0, sizeof(struct rte_intr_handle));
+		priv->intr_handle.fd = -1;
+		priv->intr_handle.type = RTE_INTR_HANDLE_EXT;
 		/*
 		 * Override ethdev interrupt handle pointer with private
-- 
2.26.2

---
  Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- -	2020-08-28 11:03:26.619864219 +0100
+++ 0029-net-mlx4-optimize-stack-memory-size-in-probe.patch	2020-08-28 11:03:25.957955716 +0100
@@ -1 +1 @@
-From 4a28e831c97cd02e1646337ea6391288f7e8db05 Mon Sep 17 00:00:00 2001
+From a1801c7bb86a0b24d5538aabb6af36100c78976c Mon Sep 17 00:00:00 2001
@@ -5,0 +6,2 @@
+[ upstream commit 4a28e831c97cd02e1646337ea6391288f7e8db05 ]
+
@@ -21 +22,0 @@
-Cc: stable@dpdk.org
@@ -30 +31 @@
-index e619a749d9..71061a720f 100644
+index 5e22ee4381..58152bb97a 100644
@@ -33 +34 @@
-@@ -1030,8 +1030,7 @@ mlx4_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
+@@ -795,8 +795,7 @@ mlx4_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)


  parent reply	other threads:[~2020-08-28 10:14 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-28 10:12 [dpdk-stable] patch 'net/bonding: fix error code on device creation' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/af_packet: fix check of file descriptors' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/af_packet: fix memory leak on init failure' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/af_packet: fix munmap " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/bonding: fix MAC address when switching active port' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/bonding: fix MAC address when one port resets' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/i40e: fix flow director Rx writeback packet' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/ixgbe: fix MAC control frame forward' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/ixgbe: fix flow control status' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/bonding: delete redundant code' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/i40e: report VLAN filter capability' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/e1000: report VLAN extend " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/e1000: fix crash on Tx done clean up' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'vhost: fix double-free with zero-copy' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net: fix pedantic build' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'doc: fix some typos in Linux guide' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'doc: fix typo in bbdev test " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'bus/vdev: fix a typo in doxygen comment' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'hash: fix out-of-memory handling in hash creation' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'test/cycles: restore default delay callback' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'event/dpaa: remove dead code' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'app/eventdev: fix capability check in pipeline ATQ test' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'event/dpaa2: add all-types queue capability flag' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'common/qat: fix uninitialized variable' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'crypto/armv8: remove debug option' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'crypto/armv8: use dedicated log type' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/mlx5: fix flow items size calculation' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/mlx5: fix crash in NVGRE item translation' " Kevin Traynor
2020-08-28 10:12 ` Kevin Traynor [this message]
2020-08-28 10:12 ` [dpdk-stable] patch 'net/i40e: fix binding interrupt without MSI-X vector' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/i40e: fix flow director MSI-X resource allocation' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/qede: remove dead code' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/virtio-user: fix status management' " Kevin Traynor
2020-08-28 10:13 ` [dpdk-stable] patch 'net/virtio-user: check tap system call setting' " Kevin Traynor
2020-08-28 10:13 ` [dpdk-stable] patch 'net/kni: set packet input port in Rx' " Kevin Traynor
2020-08-28 10:13 ` [dpdk-stable] patch 'examples/packet_ordering: use proper exit method' " Kevin Traynor
2020-08-28 10:13 ` [dpdk-stable] patch 'net/netvsc: fix crash during Tx' " Kevin Traynor
2020-08-28 10:13 ` [dpdk-stable] patch 'doc: fix ethtool app path' " Kevin Traynor
2020-08-28 10:13 ` [dpdk-stable] patch 'net/bonding: fix dead loop on RSS RETA update' " Kevin Traynor
2020-08-28 10:13 ` [dpdk-stable] patch 'net/i40e: remove duplicate tunnel type check' " Kevin Traynor
2020-08-28 10:13 ` [dpdk-stable] patch 'kni: fix reference to master/slave process' " Kevin Traynor
2020-08-28 10:13 ` [dpdk-stable] patch 'doc: fix reference to master " Kevin Traynor

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200828101308.223767-29-ktraynor@redhat.com \
    --to=ktraynor@redhat.com \
    --cc=matan@mellanox.com \
    --cc=michaelba@mellanox.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).