From: Christian Ehrhardt <christian.ehrhardt@canonical.com>
To: Ajit Khaparde <ajit.khaparde@broadcom.com>
Cc: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>,
Somnath Kotur <somnath.kotur@broadcom.com>,
dpdk stable <stable@dpdk.org>
Subject: [dpdk-stable] patch 'net/bnxt: check PCI config read' has been queued to stable release 19.11.9
Date: Mon, 17 May 2021 18:21:12 +0200 [thread overview]
Message-ID: <20210517162125.3178901-8-christian.ehrhardt@canonical.com> (raw)
In-Reply-To: <20210517162125.3178901-1-christian.ehrhardt@canonical.com>
Hi,
FYI, your patch has been queued to stable release 19.11.9
Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 05/19/21. So please
shout if anyone has objections.
Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.
Queued patches are on a temporary branch at:
https://github.com/cpaelzer/dpdk-stable-queue
This queued commit can be viewed at:
https://github.com/cpaelzer/dpdk-stable-queue/commit/eb7de8a33e07135f133ae41a83058fca96b4bbb9
Thanks.
Christian Ehrhardt <christian.ehrhardt@canonical.com>
---
From eb7de8a33e07135f133ae41a83058fca96b4bbb9 Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajit.khaparde@broadcom.com>
Date: Fri, 30 Apr 2021 13:14:11 -0700
Subject: [PATCH] net/bnxt: check PCI config read
[ upstream commit 52c33734587a135b55ff968626eabbd1167993b7 ]
Return value where return value of rte_pci_read_config was not checked.
Fix it.
Coverity issue: 349919
Fixes: 9d0cbaecc91a ("net/bnxt: support periodic FW health monitoring")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
---
drivers/net/bnxt/bnxt_ethdev.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index 5e51da21b8..60e85c33f1 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -4184,13 +4184,17 @@ uint32_t bnxt_read_fw_status_reg(struct bnxt *bp, uint32_t index)
struct bnxt_error_recovery_info *info = bp->recovery_info;
uint32_t reg = info->status_regs[index];
uint32_t type, offset, val = 0;
+ int ret = 0;
type = BNXT_FW_STATUS_REG_TYPE(reg);
offset = BNXT_FW_STATUS_REG_OFF(reg);
switch (type) {
case BNXT_FW_STATUS_REG_TYPE_CFG:
- rte_pci_read_config(bp->pdev, &val, sizeof(val), offset);
+ ret = rte_pci_read_config(bp->pdev, &val, sizeof(val), offset);
+ if (ret < 0)
+ PMD_DRV_LOG(ERR, "Failed to read PCI offset %#x",
+ offset);
break;
case BNXT_FW_STATUS_REG_TYPE_GRC:
offset = info->mapped_status_regs[index];
--
2.31.1
---
Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- - 2021-05-17 17:40:37.089405475 +0200
+++ 0197-net-bnxt-check-PCI-config-read.patch 2021-05-17 17:40:29.571812627 +0200
@@ -1 +1 @@
-From 52c33734587a135b55ff968626eabbd1167993b7 Mon Sep 17 00:00:00 2001
+From eb7de8a33e07135f133ae41a83058fca96b4bbb9 Mon Sep 17 00:00:00 2001
@@ -5,0 +6,2 @@
+[ upstream commit 52c33734587a135b55ff968626eabbd1167993b7 ]
+
@@ -11 +12,0 @@
-Cc: stable@dpdk.org
@@ -21 +22 @@
-index 115acda9b3..719eb68847 100644
+index 5e51da21b8..60e85c33f1 100644
@@ -24 +25 @@
-@@ -4159,13 +4159,17 @@ uint32_t bnxt_read_fw_status_reg(struct bnxt *bp, uint32_t index)
+@@ -4184,13 +4184,17 @@ uint32_t bnxt_read_fw_status_reg(struct bnxt *bp, uint32_t index)
next prev parent reply other threads:[~2021-05-17 16:21 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-17 16:21 [dpdk-stable] patch 'test/distributor: fix burst flush on worker quit' " Christian Ehrhardt
2021-05-17 16:21 ` [dpdk-stable] patch 'net/virtio: fix vectorized Rx queue rearm' " Christian Ehrhardt
2021-05-17 16:21 ` [dpdk-stable] patch 'net/bnxt: refactor multi-queue Rx configuration' " Christian Ehrhardt
2021-05-17 16:21 ` [dpdk-stable] patch 'net/bnxt: fix Rx timestamp when FIFO pending bit is set' " Christian Ehrhardt
2021-05-17 16:21 ` [dpdk-stable] patch 'net/bnxt: fix dynamic VNIC count' " Christian Ehrhardt
2021-05-17 16:21 ` [dpdk-stable] patch 'net/bnxt: fix single PF per port check' " Christian Ehrhardt
2021-05-17 16:21 ` [dpdk-stable] patch 'net/bnxt: fix mismatched type comparison in MAC restore' " Christian Ehrhardt
2021-05-17 16:21 ` Christian Ehrhardt [this message]
2021-05-17 16:21 ` [dpdk-stable] patch 'net/bnxt: prevent device access in error state' " Christian Ehrhardt
2021-05-17 16:21 ` [dpdk-stable] patch 'raw/ntb: check SPAD user index' " Christian Ehrhardt
2021-05-17 16:21 ` [dpdk-stable] patch 'raw/ntb: check memory allocations' " Christian Ehrhardt
2021-05-17 16:21 ` [dpdk-stable] patch 'ipc: check malloc sync reply result' " Christian Ehrhardt
2021-05-17 16:21 ` [dpdk-stable] patch 'eal: fix service core list parsing' " Christian Ehrhardt
2021-05-17 16:21 ` [dpdk-stable] patch 'app/bbdev: fix HARQ error messages' " Christian Ehrhardt
2021-05-17 16:21 ` [dpdk-stable] patch 'common/qat: increase IM buffer size for GEN3' " Christian Ehrhardt
2021-05-17 16:21 ` [dpdk-stable] patch 'compress/qat: enable compression on " Christian Ehrhardt
2021-05-17 16:21 ` [dpdk-stable] patch 'test/crypto: fix auth-cipher compare length in OOP' " Christian Ehrhardt
2021-05-17 16:21 ` [dpdk-stable] patch 'crypto/dpaa_sec: affine the thread portal affinity' " Christian Ehrhardt
2021-05-17 16:21 ` [dpdk-stable] patch 'crypto/dpaa2_sec: fix close and uninit functions' " Christian Ehrhardt
2021-05-17 16:21 ` [dpdk-stable] patch 'test/crypto: copy offset data to OOP destination buffer' " Christian Ehrhardt
2021-05-17 16:21 ` [dpdk-stable] patch 'doc: fix build with Sphinx 4' " Christian Ehrhardt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210517162125.3178901-8-christian.ehrhardt@canonical.com \
--to=christian.ehrhardt@canonical.com \
--cc=ajit.khaparde@broadcom.com \
--cc=kalesh-anakkur.purayil@broadcom.com \
--cc=somnath.kotur@broadcom.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).