[dpdk-stable] [PATCH] buildtools: fix build with meson 0.60

patches for DPDK stable branches
 help / color / mirror / Atom feed

* [dpdk-stable] [PATCH] buildtools: fix build with meson 0.60
@ 2021-10-26 19:32 Dmitry Kozlyuk
  2021-10-27 10:53 ` Bruce Richardson
                   ` (2 more replies)
  0 siblings, 3 replies; 10+ messages in thread
From: Dmitry Kozlyuk @ 2021-10-26 19:32 UTC (permalink / raw)
  To: dev; +Cc: Bruce Richardson, Dmitry Kozlyuk, stable, Michal Berger, Neil Horman

Meson 0.60 switched the format of uninstalled static libraries
to thin archives, that is, they contain only paths to object files,
not the files themselves. Files cannot be extracted in this case,
resulting in build errors:

    ar: `x' cannot be used on thin archives.

Handle thin archives when invoking pmdinfogen
by directly using the files referenced in the archive.

Bugzilla ID: 836
Fixes: e6e9730c7066 ("buildtools: support object file extraction for Windows")
Cc: stable@dpdk.org

Reported-by: Michal Berger <michallinuxstuff@gmail.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
---
 buildtools/gen-pmdinfo-cfile.py | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/buildtools/gen-pmdinfo-cfile.py b/buildtools/gen-pmdinfo-cfile.py
index 58fe3ad152..3453e5b4b9 100644
--- a/buildtools/gen-pmdinfo-cfile.py
+++ b/buildtools/gen-pmdinfo-cfile.py
@@ -8,13 +8,18 @@
 import tempfile
 
 _, tmp_root, ar, archive, output, *pmdinfogen = sys.argv
-with tempfile.TemporaryDirectory(dir=tmp_root) as temp:
-    run_ar = lambda command: subprocess.run(
-        [ar, command, os.path.abspath(archive)],
-        stdout=subprocess.PIPE, check=True, cwd=temp
-    )
-    # Don't use "ar p", because its output is corrupted on Windows.
-    run_ar("x")
-    names = run_ar("t").stdout.decode().splitlines()
-    paths = [os.path.join(temp, name) for name in names]
+archive = os.path.abspath(archive)
+names = subprocess.run([ar, "t", archive],
+    stdout=subprocess.PIPE, check=True).stdout.decode().splitlines()
+with open(archive, "rb") as f:
+    is_thin = f.read(7) == b"!<thin>"
+if is_thin:
+    # Thin archive needs no unpacking, just use the paths within.
+    paths = [os.path.join(archive, name) for name in names]
     subprocess.run(pmdinfogen + paths + [output], check=True)
+else:
+    with tempfile.TemporaryDirectory(dir=tmp_root) as temp:
+        # Don't use "ar p", because its output is corrupted on Windows.
+        paths = [os.path.join(temp, name) for name in names]
+        subprocess.run([ar, "x", archive], check=True, cwd=temp)
+        subprocess.run(pmdinfogen + paths + [output], check=True)
-- 
2.29.3


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-stable] [PATCH] buildtools: fix build with meson 0.60
  2021-10-26 19:32 [dpdk-stable] [PATCH] buildtools: fix build with meson 0.60 Dmitry Kozlyuk
@ 2021-10-27 10:53 ` Bruce Richardson
  2021-10-27 16:16 ` Bruce Richardson
  2021-11-01 17:03 ` [dpdk-stable] [PATCH v2] " Bruce Richardson
  2 siblings, 0 replies; 10+ messages in thread
From: Bruce Richardson @ 2021-10-27 10:53 UTC (permalink / raw)
  To: Dmitry Kozlyuk; +Cc: dev, stable, Michal Berger, Neil Horman

On Tue, Oct 26, 2021 at 10:32:39PM +0300, Dmitry Kozlyuk wrote:
> Meson 0.60 switched the format of uninstalled static libraries
> to thin archives, that is, they contain only paths to object files,
> not the files themselves. Files cannot be extracted in this case,
> resulting in build errors:
> 
>     ar: `x' cannot be used on thin archives.
> 
> Handle thin archives when invoking pmdinfogen
> by directly using the files referenced in the archive.
> 
> Bugzilla ID: 836
> Fixes: e6e9730c7066 ("buildtools: support object file extraction for Windows")
> Cc: stable@dpdk.org
> 
> Reported-by: Michal Berger <michallinuxstuff@gmail.com>
> Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>

Thanks for looking into this and proposing a fix. Some thoughts inline
below.

/Bruce

> ---
>  buildtools/gen-pmdinfo-cfile.py | 23 ++++++++++++++---------
>  1 file changed, 14 insertions(+), 9 deletions(-)
> 
> diff --git a/buildtools/gen-pmdinfo-cfile.py b/buildtools/gen-pmdinfo-cfile.py
> index 58fe3ad152..3453e5b4b9 100644
> --- a/buildtools/gen-pmdinfo-cfile.py
> +++ b/buildtools/gen-pmdinfo-cfile.py
> @@ -8,13 +8,18 @@
>  import tempfile
>  
>  _, tmp_root, ar, archive, output, *pmdinfogen = sys.argv
> -with tempfile.TemporaryDirectory(dir=tmp_root) as temp:
> -    run_ar = lambda command: subprocess.run(
> -        [ar, command, os.path.abspath(archive)],
> -        stdout=subprocess.PIPE, check=True, cwd=temp
> -    )
> -    # Don't use "ar p", because its output is corrupted on Windows.
> -    run_ar("x")
> -    names = run_ar("t").stdout.decode().splitlines()
> -    paths = [os.path.join(temp, name) for name in names]
> +archive = os.path.abspath(archive)
> +names = subprocess.run([ar, "t", archive],
> +    stdout=subprocess.PIPE, check=True).stdout.decode().splitlines()
> +with open(archive, "rb") as f:
> +    is_thin = f.read(7) == b"!<thin>"

This part seems overly low-level, and a bit nasty to me, compared to the
rest of the script.

Since the thin archive files already exist, I wonder if we could work on a
file by file basis here, and ignore generally the type of the ".a" file.
For example, something like:

    o_files = []
    for n in names:
        if os.path.exists(n):
            o_files += n
        else
            <extract file>
            o_files += <extracted_path>

WDYT?


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-stable] [PATCH] buildtools: fix build with meson 0.60
  2021-10-26 19:32 [dpdk-stable] [PATCH] buildtools: fix build with meson 0.60 Dmitry Kozlyuk
  2021-10-27 10:53 ` Bruce Richardson
@ 2021-10-27 16:16 ` Bruce Richardson
  2021-10-27 16:45   ` Dmitry Kozlyuk
  2021-11-01 17:03 ` [dpdk-stable] [PATCH v2] " Bruce Richardson
  2 siblings, 1 reply; 10+ messages in thread
From: Bruce Richardson @ 2021-10-27 16:16 UTC (permalink / raw)
  To: Dmitry Kozlyuk; +Cc: dev, stable, Michal Berger, thomas

On Tue, Oct 26, 2021 at 10:32:39PM +0300, Dmitry Kozlyuk wrote:
> Meson 0.60 switched the format of uninstalled static libraries
> to thin archives, that is, they contain only paths to object files,
> not the files themselves. Files cannot be extracted in this case,
> resulting in build errors:
> 
>     ar: `x' cannot be used on thin archives.
> 
> Handle thin archives when invoking pmdinfogen
> by directly using the files referenced in the archive.
> 
> Bugzilla ID: 836
> Fixes: e6e9730c7066 ("buildtools: support object file extraction for Windows")
> Cc: stable@dpdk.org
> 
> Reported-by: Michal Berger <michallinuxstuff@gmail.com>
> Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
> ---
>  buildtools/gen-pmdinfo-cfile.py | 23 ++++++++++++++---------
>  1 file changed, 14 insertions(+), 9 deletions(-)
>

Here is an alternative fix that works in my testing, based on my earlier
suggestion:

Regards,
/Bruce

diff --git a/buildtools/gen-pmdinfo-cfile.py b/buildtools/gen-pmdinfo-cfile.py
index 58fe3ad152..5fbd51658a 100644
--- a/buildtools/gen-pmdinfo-cfile.py
+++ b/buildtools/gen-pmdinfo-cfile.py
@@ -9,12 +9,13 @@

 _, tmp_root, ar, archive, output, *pmdinfogen = sys.argv
 with tempfile.TemporaryDirectory(dir=tmp_root) as temp:
-    run_ar = lambda command: subprocess.run(
-        [ar, command, os.path.abspath(archive)],
-        stdout=subprocess.PIPE, check=True, cwd=temp
-    )
-    # Don't use "ar p", because its output is corrupted on Windows.
-    run_ar("x")
-    names = run_ar("t").stdout.decode().splitlines()
-    paths = [os.path.join(temp, name) for name in names]
+    paths = []
+    for name in subprocess.run([ar, "t", archive], stdout=subprocess.PIPE,
+                               check=True).stdout.decode().splitlines():
+        if os.path.exists(name):
+            paths.append(name)
+        else:
+            subprocess.run([ar, "x", os.path.abspath(archive), name],
+                           check=True, cwd=temp)
+            paths.append(os.path.join(temp, name))
     subprocess.run(pmdinfogen + paths + [output], check=True)


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-stable] [PATCH] buildtools: fix build with meson 0.60
  2021-10-27 16:16 ` Bruce Richardson
@ 2021-10-27 16:45   ` Dmitry Kozlyuk
  2021-11-01 16:54     ` Bruce Richardson
  0 siblings, 1 reply; 10+ messages in thread
From: Dmitry Kozlyuk @ 2021-10-27 16:45 UTC (permalink / raw)
  To: Bruce Richardson; +Cc: dev, stable, Michal Berger, thomas

2021-10-27 17:16 (UTC+0100), Bruce Richardson:
> On Tue, Oct 26, 2021 at 10:32:39PM +0300, Dmitry Kozlyuk wrote:
> > Meson 0.60 switched the format of uninstalled static libraries
> > to thin archives, that is, they contain only paths to object files,
> > not the files themselves. Files cannot be extracted in this case,
> > resulting in build errors:
> > 
> >     ar: `x' cannot be used on thin archives.
> > 
> > Handle thin archives when invoking pmdinfogen
> > by directly using the files referenced in the archive.
> > 
> > Bugzilla ID: 836
> > Fixes: e6e9730c7066 ("buildtools: support object file extraction for Windows")
> > Cc: stable@dpdk.org
> > 
> > Reported-by: Michal Berger <michallinuxstuff@gmail.com>
> > Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
> > ---
> >  buildtools/gen-pmdinfo-cfile.py | 23 ++++++++++++++---------
> >  1 file changed, 14 insertions(+), 9 deletions(-)
> >  
> 
> Here is an alternative fix that works in my testing, based on my earlier
> suggestion:
> 
> Regards,
> /Bruce
> 
> diff --git a/buildtools/gen-pmdinfo-cfile.py b/buildtools/gen-pmdinfo-cfile.py
> index 58fe3ad152..5fbd51658a 100644
> --- a/buildtools/gen-pmdinfo-cfile.py
> +++ b/buildtools/gen-pmdinfo-cfile.py
> @@ -9,12 +9,13 @@
> 
>  _, tmp_root, ar, archive, output, *pmdinfogen = sys.argv
>  with tempfile.TemporaryDirectory(dir=tmp_root) as temp:
> -    run_ar = lambda command: subprocess.run(
> -        [ar, command, os.path.abspath(archive)],
> -        stdout=subprocess.PIPE, check=True, cwd=temp
> -    )
> -    # Don't use "ar p", because its output is corrupted on Windows.
> -    run_ar("x")
> -    names = run_ar("t").stdout.decode().splitlines()
> -    paths = [os.path.join(temp, name) for name in names]
> +    paths = []
> +    for name in subprocess.run([ar, "t", archive], stdout=subprocess.PIPE,
> +                               check=True).stdout.decode().splitlines():
> +        if os.path.exists(name):
> +            paths.append(name)
> +        else:
> +            subprocess.run([ar, "x", os.path.abspath(archive), name],
> +                           check=True, cwd=temp)
> +            paths.append(os.path.join(temp, name))
>      subprocess.run(pmdinfogen + paths + [output], check=True)
> 

It buys with simplicity.
I hoped to avoid creating temporary directories in vain
when all archives are thin, but maybe it's not that important.

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-stable] [PATCH] buildtools: fix build with meson 0.60
  2021-10-27 16:45   ` Dmitry Kozlyuk
@ 2021-11-01 16:54     ` Bruce Richardson
  2021-11-01 17:36       ` Dmitry Kozlyuk
  0 siblings, 1 reply; 10+ messages in thread
From: Bruce Richardson @ 2021-11-01 16:54 UTC (permalink / raw)
  To: Dmitry Kozlyuk; +Cc: dev, stable, Michal Berger, thomas

On Wed, Oct 27, 2021 at 07:45:28PM +0300, Dmitry Kozlyuk wrote:
> 2021-10-27 17:16 (UTC+0100), Bruce Richardson:
> > On Tue, Oct 26, 2021 at 10:32:39PM +0300, Dmitry Kozlyuk wrote:
> > > Meson 0.60 switched the format of uninstalled static libraries
> > > to thin archives, that is, they contain only paths to object files,
> > > not the files themselves. Files cannot be extracted in this case,
> > > resulting in build errors:
> > > 
> > >     ar: `x' cannot be used on thin archives.
> > > 
> > > Handle thin archives when invoking pmdinfogen
> > > by directly using the files referenced in the archive.
> > > 
> > > Bugzilla ID: 836
> > > Fixes: e6e9730c7066 ("buildtools: support object file extraction for Windows")
> > > Cc: stable@dpdk.org
> > > 
> > > Reported-by: Michal Berger <michallinuxstuff@gmail.com>
> > > Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
> > > ---
> > >  buildtools/gen-pmdinfo-cfile.py | 23 ++++++++++++++---------
> > >  1 file changed, 14 insertions(+), 9 deletions(-)
> > >  
> > 
> > Here is an alternative fix that works in my testing, based on my earlier
> > suggestion:
> > 
> > Regards,
> > /Bruce
> > 
> > diff --git a/buildtools/gen-pmdinfo-cfile.py b/buildtools/gen-pmdinfo-cfile.py
> > index 58fe3ad152..5fbd51658a 100644
> > --- a/buildtools/gen-pmdinfo-cfile.py
> > +++ b/buildtools/gen-pmdinfo-cfile.py
> > @@ -9,12 +9,13 @@
> > 
> >  _, tmp_root, ar, archive, output, *pmdinfogen = sys.argv
> >  with tempfile.TemporaryDirectory(dir=tmp_root) as temp:
> > -    run_ar = lambda command: subprocess.run(
> > -        [ar, command, os.path.abspath(archive)],
> > -        stdout=subprocess.PIPE, check=True, cwd=temp
> > -    )
> > -    # Don't use "ar p", because its output is corrupted on Windows.
> > -    run_ar("x")
> > -    names = run_ar("t").stdout.decode().splitlines()
> > -    paths = [os.path.join(temp, name) for name in names]
> > +    paths = []
> > +    for name in subprocess.run([ar, "t", archive], stdout=subprocess.PIPE,
> > +                               check=True).stdout.decode().splitlines():
> > +        if os.path.exists(name):
> > +            paths.append(name)
> > +        else:
> > +            subprocess.run([ar, "x", os.path.abspath(archive), name],
> > +                           check=True, cwd=temp)
> > +            paths.append(os.path.join(temp, name))
> >      subprocess.run(pmdinfogen + paths + [output], check=True)
> > 
> 
> It buys with simplicity.
> I hoped to avoid creating temporary directories in vain
> when all archives are thin, but maybe it's not that important.

Since the temp directory is contained within the build directory, I don't
think it matters. If you don't mind then, I'll do up a v2 patch with my
alternative fix and submit that to the list.

Regards,
/Bruce

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-stable] [PATCH] buildtools: fix build with meson 0.60
  2021-11-01 16:54     ` Bruce Richardson
@ 2021-11-01 17:36       ` Dmitry Kozlyuk
  0 siblings, 0 replies; 10+ messages in thread
From: Dmitry Kozlyuk @ 2021-11-01 17:36 UTC (permalink / raw)
  To: Bruce Richardson; +Cc: dev, stable, Michal Berger, thomas

2021-11-01 16:54 (UTC+0000), Bruce Richardson:
> On Wed, Oct 27, 2021 at 07:45:28PM +0300, Dmitry Kozlyuk wrote:
> > 2021-10-27 17:16 (UTC+0100), Bruce Richardson:  
> > > On Tue, Oct 26, 2021 at 10:32:39PM +0300, Dmitry Kozlyuk wrote:  
> > > > Meson 0.60 switched the format of uninstalled static libraries
> > > > to thin archives, that is, they contain only paths to object files,
> > > > not the files themselves. Files cannot be extracted in this case,
> > > > resulting in build errors:
> > > > 
> > > >     ar: `x' cannot be used on thin archives.
> > > > 
> > > > Handle thin archives when invoking pmdinfogen
> > > > by directly using the files referenced in the archive.
> > > > 
> > > > Bugzilla ID: 836
> > > > Fixes: e6e9730c7066 ("buildtools: support object file extraction for Windows")
> > > > Cc: stable@dpdk.org
> > > > 
> > > > Reported-by: Michal Berger <michallinuxstuff@gmail.com>
> > > > Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
> > > > ---
> > > >  buildtools/gen-pmdinfo-cfile.py | 23 ++++++++++++++---------
> > > >  1 file changed, 14 insertions(+), 9 deletions(-)
> > > >    
> > > 
> > > Here is an alternative fix that works in my testing, based on my earlier
> > > suggestion:
> > > 
> > > Regards,
> > > /Bruce
> > > 
> > > diff --git a/buildtools/gen-pmdinfo-cfile.py b/buildtools/gen-pmdinfo-cfile.py
> > > index 58fe3ad152..5fbd51658a 100644
> > > --- a/buildtools/gen-pmdinfo-cfile.py
> > > +++ b/buildtools/gen-pmdinfo-cfile.py
> > > @@ -9,12 +9,13 @@
> > > 
> > >  _, tmp_root, ar, archive, output, *pmdinfogen = sys.argv
> > >  with tempfile.TemporaryDirectory(dir=tmp_root) as temp:
> > > -    run_ar = lambda command: subprocess.run(
> > > -        [ar, command, os.path.abspath(archive)],
> > > -        stdout=subprocess.PIPE, check=True, cwd=temp
> > > -    )
> > > -    # Don't use "ar p", because its output is corrupted on Windows.
> > > -    run_ar("x")
> > > -    names = run_ar("t").stdout.decode().splitlines()
> > > -    paths = [os.path.join(temp, name) for name in names]
> > > +    paths = []
> > > +    for name in subprocess.run([ar, "t", archive], stdout=subprocess.PIPE,
> > > +                               check=True).stdout.decode().splitlines():
> > > +        if os.path.exists(name):
> > > +            paths.append(name)
> > > +        else:
> > > +            subprocess.run([ar, "x", os.path.abspath(archive), name],
> > > +                           check=True, cwd=temp)
> > > +            paths.append(os.path.join(temp, name))
> > >      subprocess.run(pmdinfogen + paths + [output], check=True)
> > >   
> > 
> > It buys with simplicity.
> > I hoped to avoid creating temporary directories in vain
> > when all archives are thin, but maybe it's not that important.  
> 
> Since the temp directory is contained within the build directory, I don't
> think it matters. If you don't mind then, I'll do up a v2 patch with my
> alternative fix and submit that to the list.

OK, thank you!
I meant the time spent on creating those dirs rather than polluting any place.
But it won't be any worse then it is now.


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [dpdk-stable] [PATCH v2] buildtools: fix build with meson 0.60
  2021-10-26 19:32 [dpdk-stable] [PATCH] buildtools: fix build with meson 0.60 Dmitry Kozlyuk
  2021-10-27 10:53 ` Bruce Richardson
  2021-10-27 16:16 ` Bruce Richardson
@ 2021-11-01 17:03 ` Bruce Richardson
  2021-11-02 18:08   ` Dmitry Kozlyuk
  2 siblings, 1 reply; 10+ messages in thread
From: Bruce Richardson @ 2021-11-01 17:03 UTC (permalink / raw)
  To: dev; +Cc: Bruce Richardson, stable, Michal Berger, Dmitry Kozlyuk

Meson 0.60 switched the format of uninstalled static libraries
to thin archives, that is, they contain only paths to object files,
not the files themselves. Files cannot be extracted in this case,
resulting in build errors:

    ar: `x' cannot be used on thin archives.

Handle thin archives when invoking pmdinfogen by directly using the
files referenced in the archive, when they already exist, and extracting
them if not.

Bugzilla ID: 836
Fixes: e6e9730c7066 ("buildtools: support object file extraction for Windows")
Cc: stable@dpdk.org

Reported-by: Michal Berger <michallinuxstuff@gmail.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---

v2:
	Reworked to not check explicitly for thin archives by checking for
	specific bytes in the file, but instead by checking file by file if
	an object path from the .a file exists already.
	[Kept Dmitry's signoff since v2 re-uses some snippets and commit log
	messages from v1]

---
 buildtools/gen-pmdinfo-cfile.py | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/buildtools/gen-pmdinfo-cfile.py b/buildtools/gen-pmdinfo-cfile.py
index 58fe3ad152..5fbd51658a 100644
--- a/buildtools/gen-pmdinfo-cfile.py
+++ b/buildtools/gen-pmdinfo-cfile.py
@@ -9,12 +9,13 @@

 _, tmp_root, ar, archive, output, *pmdinfogen = sys.argv
 with tempfile.TemporaryDirectory(dir=tmp_root) as temp:
-    run_ar = lambda command: subprocess.run(
-        [ar, command, os.path.abspath(archive)],
-        stdout=subprocess.PIPE, check=True, cwd=temp
-    )
-    # Don't use "ar p", because its output is corrupted on Windows.
-    run_ar("x")
-    names = run_ar("t").stdout.decode().splitlines()
-    paths = [os.path.join(temp, name) for name in names]
+    paths = []
+    for name in subprocess.run([ar, "t", archive], stdout=subprocess.PIPE,
+                               check=True).stdout.decode().splitlines():
+        if os.path.exists(name):
+            paths.append(name)
+        else:
+            subprocess.run([ar, "x", os.path.abspath(archive), name],
+                           check=True, cwd=temp)
+            paths.append(os.path.join(temp, name))
     subprocess.run(pmdinfogen + paths + [output], check=True)
--
2.32.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-stable] [PATCH v2] buildtools: fix build with meson 0.60
  2021-11-01 17:03 ` [dpdk-stable] [PATCH v2] " Bruce Richardson
@ 2021-11-02 18:08   ` Dmitry Kozlyuk
  2021-11-03 13:20     ` [dpdk-stable] [dpdk-dev] " Thomas Monjalon
  0 siblings, 1 reply; 10+ messages in thread
From: Dmitry Kozlyuk @ 2021-11-02 18:08 UTC (permalink / raw)
  To: Bruce Richardson; +Cc: dev, stable, Michal Berger

2021-11-01 17:03 (UTC+0000), Bruce Richardson:
> Meson 0.60 switched the format of uninstalled static libraries
> to thin archives, that is, they contain only paths to object files,
> not the files themselves. Files cannot be extracted in this case,
> resulting in build errors:
> 
>     ar: `x' cannot be used on thin archives.
> 
> Handle thin archives when invoking pmdinfogen by directly using the
> files referenced in the archive, when they already exist, and extracting
> them if not.
> 
> Bugzilla ID: 836
> Fixes: e6e9730c7066 ("buildtools: support object file extraction for Windows")
> Cc: stable@dpdk.org
> 
> Reported-by: Michal Berger <michallinuxstuff@gmail.com>
> Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>

LGTM.
Note: meson 0.60 can't build DPDK on Windows due to a meson bug,
but *.pmd.c generation stage passes OK.

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-stable] [dpdk-dev] [PATCH v2] buildtools: fix build with meson 0.60
  2021-11-02 18:08   ` Dmitry Kozlyuk
@ 2021-11-03 13:20     ` Thomas Monjalon
  2021-11-03 13:32       ` Thomas Monjalon
  0 siblings, 1 reply; 10+ messages in thread
From: Thomas Monjalon @ 2021-11-03 13:20 UTC (permalink / raw)
  To: Bruce Richardson; +Cc: dev, stable, Michal Berger, Dmitry Kozlyuk

02/11/2021 19:08, Dmitry Kozlyuk:
> 2021-11-01 17:03 (UTC+0000), Bruce Richardson:
> > Meson 0.60 switched the format of uninstalled static libraries
> > to thin archives, that is, they contain only paths to object files,
> > not the files themselves. Files cannot be extracted in this case,
> > resulting in build errors:
> > 
> >     ar: `x' cannot be used on thin archives.
> > 
> > Handle thin archives when invoking pmdinfogen by directly using the
> > files referenced in the archive, when they already exist, and extracting
> > them if not.
> > 
> > Bugzilla ID: 836
> > Fixes: e6e9730c7066 ("buildtools: support object file extraction for Windows")
> > Cc: stable@dpdk.org
> > 
> > Reported-by: Michal Berger <michallinuxstuff@gmail.com>
> > Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
> > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> 
> LGTM.
> Note: meson 0.60 can't build DPDK on Windows due to a meson bug,
> but *.pmd.c generation stage passes OK.

Should we add this comment in the commit log?
Knowing that Windows build is broken looks to be an interesting info.
Should we add a known issue in the release notes?



^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-stable] [dpdk-dev] [PATCH v2] buildtools: fix build with meson 0.60
  2021-11-03 13:20     ` [dpdk-stable] [dpdk-dev] " Thomas Monjalon
@ 2021-11-03 13:32       ` Thomas Monjalon
  0 siblings, 0 replies; 10+ messages in thread
From: Thomas Monjalon @ 2021-11-03 13:32 UTC (permalink / raw)
  To: Bruce Richardson; +Cc: dev, stable, Michal Berger, Dmitry Kozlyuk

03/11/2021 14:20, Thomas Monjalon:
> 02/11/2021 19:08, Dmitry Kozlyuk:
> > 2021-11-01 17:03 (UTC+0000), Bruce Richardson:
> > > Meson 0.60 switched the format of uninstalled static libraries
> > > to thin archives, that is, they contain only paths to object files,
> > > not the files themselves. Files cannot be extracted in this case,
> > > resulting in build errors:
> > > 
> > >     ar: `x' cannot be used on thin archives.
> > > 
> > > Handle thin archives when invoking pmdinfogen by directly using the
> > > files referenced in the archive, when they already exist, and extracting
> > > them if not.
> > > 
> > > Bugzilla ID: 836
> > > Fixes: e6e9730c7066 ("buildtools: support object file extraction for Windows")
> > > Cc: stable@dpdk.org
> > > 
> > > Reported-by: Michal Berger <michallinuxstuff@gmail.com>
> > > Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
> > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > 
> > LGTM.
> > Note: meson 0.60 can't build DPDK on Windows due to a meson bug,
> > but *.pmd.c generation stage passes OK.
> 
> Should we add this comment in the commit log?
> Knowing that Windows build is broken looks to be an interesting info.
> Should we add a known issue in the release notes?

It seems the issue on Windows is older than Meson 0.60,
so no additional info is needed in this commit.
A separate update can be done for this Windows-specific issue.

Applied, thanks.



^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2021-11-03 13:32 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-26 19:32 [dpdk-stable] [PATCH] buildtools: fix build with meson 0.60 Dmitry Kozlyuk
2021-10-27 10:53 ` Bruce Richardson
2021-10-27 16:16 ` Bruce Richardson
2021-10-27 16:45   ` Dmitry Kozlyuk
2021-11-01 16:54     ` Bruce Richardson
2021-11-01 17:36       ` Dmitry Kozlyuk
2021-11-01 17:03 ` [dpdk-stable] [PATCH v2] " Bruce Richardson
2021-11-02 18:08   ` Dmitry Kozlyuk
2021-11-03 13:20     ` [dpdk-stable] [dpdk-dev] " Thomas Monjalon
2021-11-03 13:32       ` Thomas Monjalon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).