patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Huisong Li <lihuisong@huawei.com>
To: <stable@dpdk.org>, <xuemingl@nvidia.com>
Cc: <lihuisong@huawei.com>, <fengchengwen@huawei.com>
Subject: [PATCH 20.11 V2 1/2] net/hns3: fix residual MAC after setting default MAC
Date: Sat, 13 Nov 2021 17:17:52 +0800	[thread overview]
Message-ID: <20211113091753.31708-2-lihuisong@huawei.com> (raw)
In-Reply-To: <20211113091753.31708-1-lihuisong@huawei.com>

[ upstream commit 19e67d8ebced5cb12829f75c70e6c497b5925e82 ]

This problem occurs in the following scenarios:
1) reset is encountered when the adapter is running.
2) set a new default MAC address

After the above two steps, the old default MAC address should be not
take effect. But the current behavior is contrary to that. This is due
to the change of the "default_addr_setted" in hw->mac from 'true' to
'false' after the reset. As a result, the old MAC address is not removed
when the new default MAC address is set. This variable controls whether
to delete the old default MAC address when setting the default MAC
address. It is only used when the mac_addr_set API is called for the
first time. In fact, when a unicast MAC address is deleted, if the
address isn't in the MAC address table, the driver doesn't return
failure. So this patch remove the redundant and troublesome variables to
resolve this problem.

Fixes: 7d7f9f80bbfb ("net/hns3: support MAC address related operations")

Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
---
 drivers/net/hns3/hns3_ethdev.c | 38 ++++++++++------------------------
 drivers/net/hns3/hns3_ethdev.h |  1 -
 2 files changed, 11 insertions(+), 28 deletions(-)

diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index abe31c841e..d54639e767 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -1568,7 +1568,7 @@ hns3_remove_mc_addr_common(struct hns3_hw *hw, struct rte_ether_addr *mac_addr)
 
 static int
 hns3_add_mac_addr(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr,
-		  uint32_t idx, __rte_unused uint32_t pool)
+		  __rte_unused uint32_t idx, __rte_unused uint32_t pool)
 {
 	struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 	char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
@@ -1599,8 +1599,6 @@ hns3_add_mac_addr(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr,
 		return ret;
 	}
 
-	if (idx == 0)
-		hw->mac.default_addr_setted = true;
 	rte_spinlock_unlock(&hw->lock);
 
 	return ret;
@@ -1665,30 +1663,19 @@ hns3_set_default_mac_addr(struct rte_eth_dev *dev,
 	struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 	struct rte_ether_addr *oaddr;
 	char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
-	bool default_addr_setted;
 	int ret, ret_val;
 
-	/*
-	 * It has been guaranteed that input parameter named mac_addr is valid
-	 * address in the rte layer of DPDK framework.
-	 */
+	rte_spinlock_lock(&hw->lock);	
 	oaddr = (struct rte_ether_addr *)hw->mac.mac_addr;
-	default_addr_setted = hw->mac.default_addr_setted;
-	if (default_addr_setted && !!rte_is_same_ether_addr(mac_addr, oaddr))
-		return 0;
-
-	rte_spinlock_lock(&hw->lock);
-	if (default_addr_setted) {
-		ret = hns3_remove_uc_addr_common(hw, oaddr);
-		if (ret) {
-			rte_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
-					      oaddr);
-			hns3_warn(hw, "Remove old uc mac address(%s) fail: %d",
-				  mac_str, ret);
+	ret = hns3_remove_uc_addr_common(hw, oaddr);
+	if (ret) {
+		rte_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
+				oaddr);
+		hns3_warn(hw, "Remove old uc mac address(%s) fail: %d",
+				mac_str, ret);
 
-			rte_spinlock_unlock(&hw->lock);
-			return ret;
-		}
+		rte_spinlock_unlock(&hw->lock);
+		return ret;
 	}
 
 	ret = hns3_add_uc_addr_common(hw, mac_addr);
@@ -1707,7 +1694,6 @@ hns3_set_default_mac_addr(struct rte_eth_dev *dev,
 
 	rte_ether_addr_copy(mac_addr,
 			    (struct rte_ether_addr *)hw->mac.mac_addr);
-	hw->mac.default_addr_setted = true;
 	rte_spinlock_unlock(&hw->lock);
 
 	return 0;
@@ -1728,7 +1714,6 @@ hns3_set_default_mac_addr(struct rte_eth_dev *dev,
 		rte_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE, oaddr);
 		hns3_warn(hw, "Failed to restore old uc mac addr(%s): %d",
 				  mac_str, ret_val);
-		hw->mac.default_addr_setted = false;
 	}
 	rte_spinlock_unlock(&hw->lock);
 
@@ -3168,7 +3153,6 @@ hns3_get_board_configuration(struct hns3_hw *hw)
 	hw->rss_dis_flag = false;
 	memcpy(hw->mac.mac_addr, cfg.mac_addr, RTE_ETHER_ADDR_LEN);
 	hw->mac.phy_addr = cfg.phy_addr;
-	hw->mac.default_addr_setted = false;
 	hw->num_tx_desc = cfg.tqp_desc_num;
 	hw->num_rx_desc = cfg.tqp_desc_num;
 	hw->dcb_info.num_pg = 1;
@@ -5111,7 +5095,7 @@ hns3_do_stop(struct hns3_adapter *hns)
 			return ret;
 		}
 	}
-	hw->mac.default_addr_setted = false;
+
 	return 0;
 }
 
diff --git a/drivers/net/hns3/hns3_ethdev.h b/drivers/net/hns3/hns3_ethdev.h
index 9d9291285e..2bb449be9d 100644
--- a/drivers/net/hns3/hns3_ethdev.h
+++ b/drivers/net/hns3/hns3_ethdev.h
@@ -172,7 +172,6 @@ enum hns3_media_type {
 
 struct hns3_mac {
 	uint8_t mac_addr[RTE_ETHER_ADDR_LEN];
-	bool default_addr_setted; /* whether default addr(mac_addr) is set */
 	uint8_t media_type;
 	uint8_t phy_addr;
 	uint8_t link_duplex  : 1; /* ETH_LINK_[HALF/FULL]_DUPLEX */
-- 
2.33.0


  reply	other threads:[~2021-11-13  9:22 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-13  8:34 [PATCH V1 0/2] net/hns3: backport two patches to 20.11.4 Huisong Li
2021-11-13  8:34 ` [PATCH V1 1/2] net/hns3: fix residual MAC after setting default MAC Huisong Li
2021-11-13  8:34 ` [PATCH V1 2/2] net/hns3: fix interrupt vector freeing Huisong Li
2021-11-13  9:02 ` [PATCH V1 0/2][20.11] net/hns3: backport two patches to 20.11.4 Xueming(Steven) Li
2021-11-13  9:17 ` [PATCH 20.11 V2 0/2] " Huisong Li
2021-11-13  9:17   ` Huisong Li [this message]
2021-11-27 13:55     ` [PATCH 20.11 V2 1/2] net/hns3: fix residual MAC after setting default MAC Xueming(Steven) Li
2021-12-06  6:11       ` lihuisong (C)
2021-11-13  9:17   ` [PATCH 20.11 V2 2/2] net/hns3: fix interrupt vector freeing Huisong Li
2021-11-27 13:56     ` Xueming(Steven) Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211113091753.31708-2-lihuisong@huawei.com \
    --to=lihuisong@huawei.com \
    --cc=fengchengwen@huawei.com \
    --cc=stable@dpdk.org \
    --cc=xuemingl@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).