From: nipun.gupta@nxp.com
To: dev@dpdk.org
Cc: thomas@monjalon.net, ferruh.yigit@intel.com,
hemant.agrawal@nxp.com, stephen@networkplumber.org,
stable@dpdk.org, Vanshika Shukla <vanshika.shukla@nxp.com>
Subject: [PATCH v3 05/15] net/dpaa2: fix timestamping for IEEE1588
Date: Mon, 3 Jan 2022 15:31:19 +0530 [thread overview]
Message-ID: <20220103100129.23965-6-nipun.gupta@nxp.com> (raw)
In-Reply-To: <20220103100129.23965-1-nipun.gupta@nxp.com>
From: Vanshika Shukla <vanshika.shukla@nxp.com>
The current implementation of DPAA2 driver code is such
that it records Rx and Tx timestamp for PTP without checking
if they are PTP packets or not. Packets for which
RTE_MBUF_F_RX_IEEE1588_TMST and RTE_MBUF_F_TX_IEEE1588_TMST
is not set, Rx and Tx timestamp should not be recorded.
This patch fixes this issue by checking if the required
flags are set in the mbuf before recording timestamps.
Also this change defines separate values for
DPAA2_TX_CONF_ENABLE and DPAA2_NO_PREFETCH_RX
Fixes: e806bf878c17 ("net/dpaa2: support timestamp")
Cc: stable@dpdk.org
Signed-off-by: Vanshika Shukla <vanshika.shukla@nxp.com>
---
drivers/net/dpaa2/dpaa2_ethdev.h | 2 +-
drivers/net/dpaa2/dpaa2_ptp.c | 8 ++++---
drivers/net/dpaa2/dpaa2_rxtx.c | 39 +++++++++++++++++++++++++-------
3 files changed, 37 insertions(+), 12 deletions(-)
diff --git a/drivers/net/dpaa2/dpaa2_ethdev.h b/drivers/net/dpaa2/dpaa2_ethdev.h
index c5e9267bf0..c21571e63d 100644
--- a/drivers/net/dpaa2/dpaa2_ethdev.h
+++ b/drivers/net/dpaa2/dpaa2_ethdev.h
@@ -62,7 +62,7 @@
/* Disable RX tail drop, default is enable */
#define DPAA2_RX_TAILDROP_OFF 0x04
/* Tx confirmation enabled */
-#define DPAA2_TX_CONF_ENABLE 0x08
+#define DPAA2_TX_CONF_ENABLE 0x06
#define DPAA2_RSS_OFFLOAD_ALL ( \
RTE_ETH_RSS_L2_PAYLOAD | \
diff --git a/drivers/net/dpaa2/dpaa2_ptp.c b/drivers/net/dpaa2/dpaa2_ptp.c
index 8d79e39244..3a4536dd69 100644
--- a/drivers/net/dpaa2/dpaa2_ptp.c
+++ b/drivers/net/dpaa2/dpaa2_ptp.c
@@ -111,10 +111,12 @@ int dpaa2_timesync_read_tx_timestamp(struct rte_eth_dev *dev,
{
struct dpaa2_dev_priv *priv = dev->data->dev_private;
- if (priv->next_tx_conf_queue)
- dpaa2_dev_tx_conf(priv->next_tx_conf_queue);
- else
+ if (priv->next_tx_conf_queue) {
+ while (!priv->tx_timestamp)
+ dpaa2_dev_tx_conf(priv->next_tx_conf_queue);
+ } else {
return -1;
+ }
*timestamp = rte_ns_to_timespec(priv->tx_timestamp);
return 0;
diff --git a/drivers/net/dpaa2/dpaa2_rxtx.c b/drivers/net/dpaa2/dpaa2_rxtx.c
index c65589a5f3..ee3ed1b152 100644
--- a/drivers/net/dpaa2/dpaa2_rxtx.c
+++ b/drivers/net/dpaa2/dpaa2_rxtx.c
@@ -140,8 +140,10 @@ dpaa2_dev_rx_parse_slow(struct rte_mbuf *mbuf,
annotation->word3, annotation->word4);
#if defined(RTE_LIBRTE_IEEE1588)
- if (BIT_ISSET_AT_POS(annotation->word1, DPAA2_ETH_FAS_PTP))
+ if (BIT_ISSET_AT_POS(annotation->word1, DPAA2_ETH_FAS_PTP)) {
mbuf->ol_flags |= RTE_MBUF_F_RX_IEEE1588_PTP;
+ mbuf->ol_flags |= RTE_MBUF_F_RX_IEEE1588_TMST;
+ }
#endif
if (BIT_ISSET_AT_POS(annotation->word3, L2_VLAN_1_PRESENT)) {
@@ -769,7 +771,10 @@ dpaa2_dev_prefetch_rx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
else
bufs[num_rx] = eth_fd_to_mbuf(fd, eth_data->port_id);
#if defined(RTE_LIBRTE_IEEE1588)
- priv->rx_timestamp = *dpaa2_timestamp_dynfield(bufs[num_rx]);
+ if (bufs[num_rx]->ol_flags & PKT_RX_IEEE1588_TMST) {
+ priv->rx_timestamp =
+ *dpaa2_timestamp_dynfield(bufs[num_rx]);
+ }
#endif
if (eth_data->dev_conf.rxmode.offloads &
@@ -986,6 +991,13 @@ dpaa2_dev_rx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
bufs[num_rx] = eth_fd_to_mbuf(fd,
eth_data->port_id);
+#if defined(RTE_LIBRTE_IEEE1588)
+ if (bufs[num_rx]->ol_flags & PKT_RX_IEEE1588_TMST) {
+ priv->rx_timestamp =
+ *dpaa2_timestamp_dynfield(bufs[num_rx]);
+ }
+#endif
+
if (eth_data->dev_conf.rxmode.offloads &
RTE_ETH_RX_OFFLOAD_VLAN_STRIP) {
rte_vlan_strip(bufs[num_rx]);
@@ -1021,6 +1033,8 @@ uint16_t dpaa2_dev_tx_conf(void *queue)
struct rte_eth_dev_data *eth_data = dpaa2_q->eth_data;
struct dpaa2_dev_priv *priv = eth_data->dev_private;
struct dpaa2_annot_hdr *annotation;
+ void *v_addr;
+ struct rte_mbuf *mbuf;
#endif
if (unlikely(!DPAA2_PER_LCORE_DPIO)) {
@@ -1105,10 +1119,16 @@ uint16_t dpaa2_dev_tx_conf(void *queue)
num_tx_conf++;
num_pulled++;
#if defined(RTE_LIBRTE_IEEE1588)
- annotation = (struct dpaa2_annot_hdr *)((size_t)
- DPAA2_IOVA_TO_VADDR(DPAA2_GET_FD_ADDR(fd)) +
- DPAA2_FD_PTA_SIZE);
- priv->tx_timestamp = annotation->word2;
+ v_addr = DPAA2_IOVA_TO_VADDR(DPAA2_GET_FD_ADDR(fd));
+ mbuf = DPAA2_INLINE_MBUF_FROM_BUF(v_addr,
+ rte_dpaa2_bpid_info[DPAA2_GET_FD_BPID(fd)].meta_data_size);
+
+ if (mbuf->ol_flags & PKT_TX_IEEE1588_TMST) {
+ annotation = (struct dpaa2_annot_hdr *)((size_t)
+ DPAA2_IOVA_TO_VADDR(DPAA2_GET_FD_ADDR(fd)) +
+ DPAA2_FD_PTA_SIZE);
+ priv->tx_timestamp = annotation->word2;
+ }
#endif
} while (pending);
@@ -1184,8 +1204,11 @@ dpaa2_dev_tx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
* corresponding to last packet transmitted for reading
* the timestamp
*/
- priv->next_tx_conf_queue = dpaa2_q->tx_conf_queue;
- dpaa2_dev_tx_conf(dpaa2_q->tx_conf_queue);
+ if ((*bufs)->ol_flags & PKT_TX_IEEE1588_TMST) {
+ priv->next_tx_conf_queue = dpaa2_q->tx_conf_queue;
+ dpaa2_dev_tx_conf(dpaa2_q->tx_conf_queue);
+ priv->tx_timestamp = 0;
+ }
#endif
/*Prepare enqueue descriptor*/
--
2.17.1
prev parent reply other threads:[~2022-01-03 10:01 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20211206121824.3493-1-nipun.gupta@nxp.com>
2021-12-06 12:18 ` [PATCH 04/17] net/dpaa2: fix unregistering interrupt handler nipun.gupta
2021-12-06 12:18 ` [PATCH 05/17] net/dpaa2: fix timestamping for IEEE1588 nipun.gupta
2021-12-06 12:18 ` [PATCH 17/17] net/pfe: fix for 32 bit and PPC compilation nipun.gupta
[not found] ` <20211227161645.24359-1-nipun.gupta@nxp.com>
2021-12-27 16:16 ` [PATCH v2 04/16] net/dpaa2: fix unregistering interrupt handler nipun.gupta
2021-12-27 16:16 ` [PATCH v2 05/16] net/dpaa2: fix timestamping for IEEE1588 nipun.gupta
[not found] ` <20220103100129.23965-1-nipun.gupta@nxp.com>
2022-01-03 10:01 ` [PATCH v3 04/15] net/dpaa2: fix unregistering interrupt handler nipun.gupta
2022-01-03 10:01 ` nipun.gupta [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220103100129.23965-6-nipun.gupta@nxp.com \
--to=nipun.gupta@nxp.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=hemant.agrawal@nxp.com \
--cc=stable@dpdk.org \
--cc=stephen@networkplumber.org \
--cc=thomas@monjalon.net \
--cc=vanshika.shukla@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).