From: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
To: <dev@dpdk.org>
Cc: Xiaoyun Li <xiaoyun.li@intel.com>,
Aman Singh <aman.deep.singh@intel.com>,
Yuying Zhang <yuying.zhang@intel.com>, <jing.d.chen@intel.com>,
<stable@dpdk.org>, Raslan Darawsheh <rasland@nvidia.com>
Subject: [PATCH] app/testpmd: skip stopped queues when forwarding
Date: Thu, 13 Jan 2022 11:21:03 +0200 [thread overview]
Message-ID: <20220113092103.282538-1-dkozlyuk@nvidia.com> (raw)
After "port <port_id> rxq|txq <queue_id> stop"
the stopped queue was used in forwarding nonetheless,
which may cause undefined behavior in the PMD.
Record the configured queue state
and account for it when launching forwarding as follows:
+--------+---------+-----------------+---------------+
|RxQ |TxQ |Configured mode |Launch routine |
+--------+---------+-----------------+---------------+
|stopped |stopped |* |- |
|stopped |started |txonly |(configured) |
|stopped |started |* |- |
|started |stopped |* |rxonly |
|started |started |* |(configured) |
+--------+---------+-----------------+---------------+
Display stopped queues on "show port config rxtx".
Fixes: 5f4ec54f1d16 ("testpmd: queue start and stop")
Cc: jing.d.chen@intel.com
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Reviewed-by: Raslan Darawsheh <rasland@nvidia.com>
---
app/test-pmd/cmdline.c | 8 ++++++++
app/test-pmd/config.c | 6 ++++++
app/test-pmd/testpmd.c | 18 ++++++++++++++++--
app/test-pmd/testpmd.h | 10 ++++++++++
4 files changed, 40 insertions(+), 2 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index e626b1c7d9..8b0920e23d 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -2702,6 +2702,14 @@ cmd_config_rxtx_queue_parsed(void *parsed_result,
if (ret == -ENOTSUP)
fprintf(stderr, "Function not supported in PMD\n");
+ if (ret == 0) {
+ struct rte_port *port;
+ struct queue_state *states;
+
+ port = &ports[res->portid];
+ states = isrx ? port->rxq_state : port->txq_state;
+ states[res->qid].stopped = !isstart;
+ }
}
cmdline_parse_token_string_t cmd_config_rxtx_queue_port =
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 1722d6c8f8..7ce9cb483a 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -2817,6 +2817,9 @@ rxtx_config_display(void)
rx_conf->share_qid);
printf("\n");
}
+ for (qid = 0; qid < nb_rxq; qid++)
+ if (ports[pid].rxq_state[qid].stopped)
+ printf(" RX queue %d is stopped\n", qid);
/* per tx queue config only for first queue to be less verbose */
for (qid = 0; qid < 1; qid++) {
@@ -2850,6 +2853,9 @@ rxtx_config_display(void)
printf(" TX offloads=0x%"PRIx64" - TX RS bit threshold=%d\n",
offloads_tmp, tx_rs_thresh_tmp);
}
+ for (qid = 0; qid < nb_txq; qid++)
+ if (ports[pid].txq_state[qid].stopped)
+ printf(" TX queue %d is stopped\n", qid);
}
}
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 6c387bde84..36ff845181 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -2152,6 +2152,8 @@ flush_fwd_rx_queues(void)
for (rxp = 0; rxp < cur_fwd_config.nb_fwd_ports; rxp++) {
for (rxq = 0; rxq < nb_rxq; rxq++) {
port_id = fwd_ports_ids[rxp];
+ if (ports[port_id].rxq_state[rxq].stopped)
+ continue;
/**
* testpmd can stuck in the below do while loop
* if rte_eth_rx_burst() always returns nonzero
@@ -2223,8 +2225,20 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
static int
start_pkt_forward_on_core(void *fwd_arg)
{
- run_pkt_fwd_on_lcore((struct fwd_lcore *) fwd_arg,
- cur_fwd_config.fwd_eng->packet_fwd);
+ struct fwd_lcore *fc = fwd_arg;
+ struct fwd_stream *fsm = fwd_streams[fc->stream_idx];
+ struct queue_state *rxq = &ports[fsm->rx_port].rxq_state[fsm->rx_queue];
+ struct queue_state *txq = &ports[fsm->tx_port].txq_state[fsm->tx_queue];
+ struct fwd_engine *fwd_engine = cur_fwd_config.fwd_eng;
+ packet_fwd_t packet_fwd;
+
+ /* Check if there will ever be any packets to send. */
+ if (rxq->stopped && (txq->stopped || fwd_engine != &tx_only_engine))
+ return 0;
+ /* Force rxonly mode if RxQ is started, but TxQ is stopped. */
+ packet_fwd = !rxq->stopped && txq->stopped ? rx_only_engine.packet_fwd
+ : fwd_engine->packet_fwd;
+ run_pkt_fwd_on_lcore(fc, packet_fwd);
return 0;
}
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 2149ecd93a..2744fa4d76 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -216,6 +216,12 @@ struct xstat_display_info {
bool allocated;
};
+/** Application state of a queue. */
+struct queue_state {
+ /** The queue is stopped and should not be used. */
+ bool stopped;
+};
+
/**
* The data structure associated with each port.
*/
@@ -256,6 +262,10 @@ struct rte_port {
uint64_t mbuf_dynf;
const struct rte_eth_rxtx_callback *tx_set_dynf_cb[RTE_MAX_QUEUES_PER_PORT+1];
struct xstat_display_info xstats_info;
+ /** Per-Rx-queue state. */
+ struct queue_state rxq_state[RTE_MAX_QUEUES_PER_PORT];
+ /** Per-Tx-queue state. */
+ struct queue_state txq_state[RTE_MAX_QUEUES_PER_PORT];
};
/**
--
2.25.1
next reply other threads:[~2022-01-13 9:21 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-13 9:21 Dmitry Kozlyuk [this message]
2022-02-02 10:02 ` Dmitry Kozlyuk
2022-02-03 13:52 ` Singh, Aman Deep
2022-02-09 8:59 ` Zhang, Yuying
2022-02-09 10:38 ` Dmitry Kozlyuk
2022-02-09 14:56 ` Li, Xiaoyun
[not found] ` <20220306232310.613552-1-dkozlyuk@nvidia.com>
2022-03-06 23:23 ` [PATCH v2 1/2] ethdev: prohibit polling of a stopped queue Dmitry Kozlyuk
2022-03-06 23:23 ` [PATCH v2 2/2] app/testpmd: do not poll stopped queues Dmitry Kozlyuk
[not found] ` <20220307125351.697936-1-dkozlyuk@nvidia.com>
2022-03-07 12:53 ` [PATCH v3 1/2] " Dmitry Kozlyuk
2022-03-09 10:36 ` Dmitry Kozlyuk
2023-07-08 1:54 ` Stephen Hemminger
2022-05-25 15:46 ` Thomas Monjalon
2022-06-10 11:28 ` Jiang, YuX
2022-03-07 12:53 ` [PATCH v3 2/2] ethdev: prohibit polling of a stopped queue Dmitry Kozlyuk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220113092103.282538-1-dkozlyuk@nvidia.com \
--to=dkozlyuk@nvidia.com \
--cc=aman.deep.singh@intel.com \
--cc=dev@dpdk.org \
--cc=jing.d.chen@intel.com \
--cc=rasland@nvidia.com \
--cc=stable@dpdk.org \
--cc=xiaoyun.li@intel.com \
--cc=yuying.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).