From: Michael Baum <michaelba@nvidia.com>
To: <dev@dpdk.org>
Cc: Matan Azrad <matan@nvidia.com>,
Raslan Darawsheh <rasland@nvidia.com>,
Viacheslav Ovsiienko <viacheslavo@nvidia.com>, <stable@dpdk.org>
Subject: [PATCH v2 01/20] net/mlx5: fix wrong check sibling device config mismatch
Date: Mon, 14 Feb 2022 11:34:52 +0200 [thread overview]
Message-ID: <20220214093511.1592698-2-michaelba@nvidia.com> (raw)
In-Reply-To: <20220214093511.1592698-1-michaelba@nvidia.com>
The MLX5 net driver supports "probe again". In probing again, it
creates a new ethdev under an existing infiniband device context.
Sibling devices sharing infiniband device context should have compatible
configurations, so some of the devargs given in the probe again, the
ones that are mainly relevant to the sharing device context are sent to
the mlx5_dev_check_sibling_config function which makes sure that they
compatible its siblings.
However, the arguments are adjusted according to the capability of the
device, and the function compares the arguments of the probe again
before the adjustment with the arguments of the siblings after the
adjustment. A user who sends the same values to all siblings may fail in
this comparison if he requested something that the device does not
support and adjusted.
This patch moves the call to the mlx5_dev_check_sibling_config function
after the relevant adjustments.
Fixes: 92d5dd483450 ("net/mlx5: check sibling device configurations mismatch")
Fixes: 2d241515ebaf ("net/mlx5: add devarg for extensive metadata support")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
---
drivers/net/mlx5/linux/mlx5_os.c | 41 ++++++++++++++++--------------
drivers/net/mlx5/windows/mlx5_os.c | 28 ++++++++++++--------
2 files changed, 39 insertions(+), 30 deletions(-)
diff --git a/drivers/net/mlx5/linux/mlx5_os.c b/drivers/net/mlx5/linux/mlx5_os.c
index bbe05bb837..e157795b63 100644
--- a/drivers/net/mlx5/linux/mlx5_os.c
+++ b/drivers/net/mlx5/linux/mlx5_os.c
@@ -1241,6 +1241,28 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
}
/* Override some values set by hardware configuration. */
mlx5_args(config, dpdk_dev->devargs);
+ /* Update final values for devargs before check sibling config. */
+#if !defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_MLX5DV_DR)
+ if (config->dv_flow_en) {
+ DRV_LOG(WARNING, "DV flow is not supported.");
+ config->dv_flow_en = 0;
+ }
+#endif
+#ifdef HAVE_MLX5DV_DR_ESWITCH
+ if (!(sh->cdev->config.hca_attr.eswitch_manager && config->dv_flow_en &&
+ (switch_info->representor || switch_info->master)))
+ config->dv_esw_en = 0;
+#else
+ config->dv_esw_en = 0;
+#endif
+ if (!priv->config.dv_esw_en &&
+ priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
+ DRV_LOG(WARNING,
+ "Metadata mode %u is not supported (no E-Switch).",
+ priv->config.dv_xmeta_en);
+ priv->config.dv_xmeta_en = MLX5_XMETA_MODE_LEGACY;
+ }
+ /* Check sibling device configurations. */
err = mlx5_dev_check_sibling_config(priv, config, dpdk_dev);
if (err)
goto error;
@@ -1251,12 +1273,6 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
#if !defined(HAVE_IBV_DEVICE_COUNTERS_SET_V42) && \
!defined(HAVE_IBV_DEVICE_COUNTERS_SET_V45)
DRV_LOG(DEBUG, "counters are not supported");
-#endif
-#if !defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_MLX5DV_DR)
- if (config->dv_flow_en) {
- DRV_LOG(WARNING, "DV flow is not supported");
- config->dv_flow_en = 0;
- }
#endif
config->ind_table_max_size =
sh->device_attr.max_rwq_indirection_table_size;
@@ -1652,13 +1668,6 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
* Verbs context returned by ibv_open_device().
*/
mlx5_link_update(eth_dev, 0);
-#ifdef HAVE_MLX5DV_DR_ESWITCH
- if (!(config->hca_attr.eswitch_manager && config->dv_flow_en &&
- (switch_info->representor || switch_info->master)))
- config->dv_esw_en = 0;
-#else
- config->dv_esw_en = 0;
-#endif
/* Detect minimal data bytes to inline. */
mlx5_set_min_inline(spawn, config);
/* Store device configuration on private structure. */
@@ -1725,12 +1734,6 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
err = -err;
goto error;
}
- if (!priv->config.dv_esw_en &&
- priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
- DRV_LOG(WARNING, "metadata mode %u is not supported "
- "(no E-Switch)", priv->config.dv_xmeta_en);
- priv->config.dv_xmeta_en = MLX5_XMETA_MODE_LEGACY;
- }
mlx5_set_metadata_mask(eth_dev);
if (priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
!priv->sh->dv_regc0_mask) {
diff --git a/drivers/net/mlx5/windows/mlx5_os.c b/drivers/net/mlx5/windows/mlx5_os.c
index 7f3532426f..3db33cd0cf 100644
--- a/drivers/net/mlx5/windows/mlx5_os.c
+++ b/drivers/net/mlx5/windows/mlx5_os.c
@@ -439,6 +439,21 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
}
/* Override some values set by hardware configuration. */
mlx5_args(config, dpdk_dev->devargs);
+ /* Update final values for devargs before check sibling config. */
+ config->dv_esw_en = 0;
+ if (!config->dv_flow_en) {
+ DRV_LOG(ERR, "Windows flow mode must be DV flow enable.");
+ err = ENOTSUP;
+ goto error;
+ }
+ if (!priv->config.dv_esw_en &&
+ priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
+ DRV_LOG(WARNING,
+ "Metadata mode %u is not supported (no E-Switch).",
+ priv->config.dv_xmeta_en);
+ priv->config.dv_xmeta_en = MLX5_XMETA_MODE_LEGACY;
+ }
+ /* Check sibling device configurations. */
err = mlx5_dev_check_sibling_config(priv, config, dpdk_dev);
if (err)
goto error;
@@ -600,7 +615,6 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
* Verbs context returned by ibv_open_device().
*/
mlx5_link_update(eth_dev, 0);
- config->dv_esw_en = 0;
/* Detect minimal data bytes to inline. */
mlx5_set_min_inline(spawn, config);
/* Store device configuration on private structure. */
@@ -622,12 +636,6 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
}
/* No supported flow priority number detection. */
priv->sh->flow_max_priority = -1;
- if (!priv->config.dv_esw_en &&
- priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
- DRV_LOG(WARNING, "metadata mode %u is not supported "
- "(no E-Switch)", priv->config.dv_xmeta_en);
- priv->config.dv_xmeta_en = MLX5_XMETA_MODE_LEGACY;
- }
mlx5_set_metadata_mask(eth_dev);
if (priv->config.dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
!priv->sh->dv_regc0_mask) {
@@ -661,12 +669,10 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
goto error;
}
}
- if (sh->devx && config->dv_flow_en) {
+ if (sh->devx) {
priv->obj_ops = devx_obj_ops;
} else {
- DRV_LOG(ERR, "Flow mode %u is not supported "
- "(Windows flow must be DevX with DV flow enabled).",
- priv->config.dv_flow_en);
+ DRV_LOG(ERR, "Windows flow must be DevX.");
err = ENOTSUP;
goto error;
}
--
2.25.1
next prev parent reply other threads:[~2022-02-14 9:35 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20220127153950.812953-1-michaelba@nvidia.com>
2022-01-27 15:39 ` [PATCH " Michael Baum
2022-01-27 15:39 ` [PATCH 02/20] net/mlx5: fix ineffective metadata argument adjustment Michael Baum
2022-01-27 15:39 ` [PATCH 03/20] net/mlx5: fix wrong place of ASO CT object release Michael Baum
2022-01-27 15:39 ` [PATCH 04/20] net/mlx5: fix inconsistency errno update in SH creation Michael Baum
[not found] ` <20220214093511.1592698-1-michaelba@nvidia.com>
2022-02-14 9:34 ` Michael Baum [this message]
2022-02-14 9:34 ` [PATCH v2 02/20] net/mlx5: fix ineffective metadata argument adjustment Michael Baum
2022-02-14 9:34 ` [PATCH v2 03/20] net/mlx5: fix wrong place of ASO CT object release Michael Baum
2022-02-14 9:34 ` [PATCH v2 04/20] net/mlx5: fix inconsistency errno update in SH creation Michael Baum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220214093511.1592698-2-michaelba@nvidia.com \
--to=michaelba@nvidia.com \
--cc=dev@dpdk.org \
--cc=matan@nvidia.com \
--cc=rasland@nvidia.com \
--cc=stable@dpdk.org \
--cc=viacheslavo@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).