[PATCH v4] net/mlx5: fix the NIC egress flow mismatch in switchdev mode

[Jiawei Wang <jiaweiw@nvidia.com>]

When E-Switch mode was enabled, the NIC egress flows was implicitly
appended with source vport to match on. If the metadata register C0
was used to maintain the source vport, it was initialized to zero
on packet steering engine entry, the flow could be hit only
if source vport was zero, the register C0 of the packet was not correct
to match in the TX side, this caused egress flow misses.

This patch:
 - removes the implicit source vport match for NIC egress flow.
 - rejects the NIC egress flows on the representor ports at validation.
 - allows the internal NIC egress flows containing the TX_QUEUE items in
   order to not impact hairpins.

Fixes: ce777b147bf8 ("net/mlx5: fix E-Switch flow without port item")
Cc: stable@dpdk.org

Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
---
v4: rebase
v3: update the tx_item checking
v2: fix one typo
---
 doc/guides/nics/mlx5.rst        |  1 +
 drivers/net/mlx5/mlx5_flow_dv.c | 26 +++++++++++++++++++++-----
 2 files changed, 22 insertions(+), 5 deletions(-)

diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index c31a154181..acf37bd862 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -504,6 +504,7 @@ Limitations
 
   Matching on checksum and sequence needs OFED 5.6+.
 
+- The NIC Egress flow on representor port is not supported.
 
 Statistics
 ----------
diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index ae88a1cc29..b596144159 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -7212,8 +7212,10 @@ flow_dv_validate(struct rte_eth_dev *dev, const struct rte_flow_attr *attr,
 				return ret;
 			last_item = MLX5_FLOW_ITEM_TAG;
 			break;
-		case MLX5_RTE_FLOW_ITEM_TYPE_TAG:
 		case MLX5_RTE_FLOW_ITEM_TYPE_TX_QUEUE:
+			last_item = MLX5_FLOW_ITEM_TX_QUEUE;
+			break;
+		case MLX5_RTE_FLOW_ITEM_TYPE_TAG:
 			break;
 		case RTE_FLOW_ITEM_TYPE_GTP:
 			ret = flow_dv_validate_item_gtp(dev, items, item_flags,
@@ -8047,6 +8049,18 @@ flow_dv_validate(struct rte_eth_dev *dev, const struct rte_flow_attr *attr,
 		return rte_flow_error_set(error, EINVAL,
 				RTE_FLOW_ERROR_TYPE_ACTION, NULL,
 				"sample before modify action is not supported");
+	/*
+	 * Validation the NIC Egress flow on representor, except implicit
+	 * hairpin default egress flow with TX_QUEUE item, other flows not
+	 * work due to metadata regC0 mismatch.
+	 */
+	if ((!attr->transfer && attr->egress) && priv->representor &&
+	    !(item_flags & MLX5_FLOW_ITEM_TX_QUEUE))
+		return rte_flow_error_set(error, EINVAL,
+					  RTE_FLOW_ERROR_TYPE_ITEM,
+					  NULL,
+					  "NIC egress rules on representors"
+					  " is not supported");
 	return 0;
 }
 
@@ -13732,11 +13746,13 @@ flow_dv_translate(struct rte_eth_dev *dev,
 	/*
 	 * When E-Switch mode is enabled, we have two cases where we need to
 	 * set the source port manually.
-	 * The first one, is in case of Nic steering rule, and the second is
-	 * E-Switch rule where no port_id item was found. In both cases
-	 * the source port is set according the current port in use.
+	 * The first one, is in case of NIC ingress steering rule, and the
+	 * second is E-Switch rule where no port_id item was found.
+	 * In both cases the source port is set according the current port
+	 * in use.
 	 */
-	if (!(item_flags & MLX5_FLOW_ITEM_PORT_ID) && priv->sh->esw_mode) {
+	if (!(item_flags & MLX5_FLOW_ITEM_PORT_ID) && priv->sh->esw_mode &&
+	    !(attr->egress && !attr->transfer)) {
 		if (flow_dv_translate_item_port_id(dev, match_mask,
 						   match_value, NULL, attr))
 			return -rte_errno;
-- 
2.18.1