From: Jiawei Wang <jiaweiw@nvidia.com>
To: <viacheslavo@nvidia.com>, <matan@nvidia.com>, <orika@nvidia.com>
Cc: <dev@dpdk.org>, <rasland@nvidia.com>, <stable@dpdk.org>
Subject: [PATCH] net/mlx5: fix the implicit tag insertion in sample flow
Date: Thu, 10 Mar 2022 06:00:10 +0200 [thread overview]
Message-ID: <20220310040010.12454-1-jiaweiw@nvidia.com> (raw)
The flow with sample action was split into two sub-flows,
and the implicit tag action with unique id was added in the prefix
sub-flow, the suffix sub-flow used the tag item to match with that
unique id, and the implicit set tag action was inserted next to
the sample action.
While there's either PUSH VLAN action or ENCAP action preceding the
sample action, implicit set tag action was added after PUSH VLAN or
ENCAP actions, causing flow creation failure due to rdma-core
does not support this action order.
This patch ensures the implicit set tag action is inserted before
either PUSH VLAN or encap action (if any) in the prefix sub-flow.
Fixes: 6a951567c159 ("net/mlx5: support E-Switch mirroring and jump in one flow")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
---
drivers/net/mlx5/mlx5_flow.c | 63 ++++++++++++++++++++++++++++++++++--
1 file changed, 61 insertions(+), 2 deletions(-)
diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index a690e2d337..d26454a1b1 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -5831,8 +5831,9 @@ flow_sample_split_prep(struct rte_eth_dev *dev,
struct mlx5_rte_flow_item_tag *tag_mask;
struct rte_flow_action_jump *jump_action;
uint32_t tag_id = 0;
- int index;
int append_index = 0;
+ int set_tag_idx = -1;
+ int index;
int ret;
if (sample_action_pos < 0)
@@ -5841,6 +5842,52 @@ flow_sample_split_prep(struct rte_eth_dev *dev,
NULL, "invalid position of sample "
"action in list");
/* Prepare the actions for prefix and suffix flow. */
+ if (add_tag) {
+ /* Update the new added tag action index preceding
+ * the PUSH_VLAN or ENCAP action.
+ */
+ const struct rte_flow_action_raw_encap *raw_encap;
+ const struct rte_flow_action *action = actions;
+ int encap_idx;
+ int action_idx = 0;
+ int raw_decap_idx = -1;
+ int push_vlan_idx = -1;
+ for (; action->type != RTE_FLOW_ACTION_TYPE_END; action++) {
+ switch (action->type) {
+ case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
+ raw_decap_idx = action_idx;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
+ raw_encap = action->conf;
+ if (raw_encap->size >
+ MLX5_ENCAPSULATION_DECISION_SIZE) {
+ encap_idx = raw_decap_idx != -1 ?
+ raw_decap_idx : action_idx;
+ if (encap_idx < sample_action_pos &&
+ push_vlan_idx == -1)
+ set_tag_idx = encap_idx;
+ }
+ break;
+ case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
+ case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
+ encap_idx = action_idx;
+ if (encap_idx < sample_action_pos &&
+ push_vlan_idx == -1)
+ set_tag_idx = encap_idx;
+ break;
+ case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
+ case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
+ push_vlan_idx = action_idx;
+ if (push_vlan_idx < sample_action_pos)
+ set_tag_idx = action_idx;
+ break;
+ default:
+ break;
+ }
+ action_idx++;
+ }
+ }
+ /* Prepare the actions for prefix and suffix flow. */
if (qrss_action_pos >= 0 && qrss_action_pos < sample_action_pos) {
index = qrss_action_pos;
/* Put the preceding the Queue/RSS action into prefix flow. */
@@ -5857,6 +5904,14 @@ flow_sample_split_prep(struct rte_eth_dev *dev,
memcpy(actions_sfx, actions + qrss_action_pos,
sizeof(struct rte_flow_action));
actions_sfx++;
+ } else if (add_tag && set_tag_idx >= 0) {
+ if (set_tag_idx > 0)
+ memcpy(actions_pre, actions,
+ sizeof(struct rte_flow_action) * set_tag_idx);
+ memcpy(actions_pre + set_tag_idx + 1, actions + set_tag_idx,
+ sizeof(struct rte_flow_action) *
+ (sample_action_pos - set_tag_idx));
+ index = sample_action_pos;
} else {
index = sample_action_pos;
if (index != 0)
@@ -5898,13 +5953,17 @@ flow_sample_split_prep(struct rte_eth_dev *dev,
RTE_FLOW_ITEM_TYPE_END,
};
/* Prepare the tag action in prefix subflow. */
- actions_pre[index++] =
+ set_tag_idx = (set_tag_idx == -1) ? index : set_tag_idx;
+ actions_pre[set_tag_idx] =
(struct rte_flow_action){
.type = (enum rte_flow_action_type)
MLX5_RTE_FLOW_ACTION_TYPE_TAG,
.conf = set_tag,
};
+ /* Update next sample position due to add one tag action */
+ index += 1;
}
+ /* Copy the sample action into prefix flow. */
memcpy(actions_pre + index, actions + sample_action_pos,
sizeof(struct rte_flow_action));
index += 1;
--
2.18.1
next reply other threads:[~2022-03-10 4:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-10 4:00 Jiawei Wang [this message]
2022-03-10 15:39 ` Raslan Darawsheh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220310040010.12454-1-jiaweiw@nvidia.com \
--to=jiaweiw@nvidia.com \
--cc=dev@dpdk.org \
--cc=matan@nvidia.com \
--cc=orika@nvidia.com \
--cc=rasland@nvidia.com \
--cc=stable@dpdk.org \
--cc=viacheslavo@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).