[PATCH v4] net/i40e: fix max frame size config at port level

[wenxuanx.wu@intel.com]

From: Wenxuan Wu <wenxuanx.wu@intel.com>

Previously, max frame size can only be set when link is up, and the wait
time is 1 sec. Startup time of 10G_BASET longer than 1s would result in
failure.

Acctually, max frame size of media type I40E_MEDIA_TYPE_BASET can be set
regardless of link status.

This patch omitted the link status check of 10G_MEDIA_TYPE_BASET.

Fixes: a4ba77367923 ("net/i40e: enable maximum frame size at port level")
Cc: stable@dpdk.org

Signed-off-by: Wenxuan Wu <wenxuanx.wu@intel.com>
---
 drivers/net/i40e/i40e_ethdev.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 755786dc10..50182e0ea3 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -12103,16 +12103,20 @@ i40e_set_mac_max_frame(struct rte_eth_dev *dev, uint16_t size)
 	uint32_t rep_cnt = MAX_REPEAT_TIME;
 	struct rte_eth_link link;
 	enum i40e_status_code status;
+	bool can_be_set = true;
 
-	do {
-		update_link_reg(hw, &link);
-		if (link.link_status)
-			break;
-
-		rte_delay_ms(CHECK_INTERVAL);
-	} while (--rep_cnt);
+	/* I40E_MEDIA_TYPE_BASET link up can be ignored */
+	if (hw->phy.media_type != I40E_MEDIA_TYPE_BASET) {
+		do {
+			update_link_reg(hw, &link);
+			if (link.link_status)
+				break;
+			rte_delay_ms(CHECK_INTERVAL);
+		} while (--rep_cnt);
+		can_be_set = !(!link.link_status);
+	}
 
-	if (link.link_status) {
+	if (can_be_set) {
 		status = i40e_aq_set_mac_config(hw, size, TRUE, 0, false, NULL);
 		if (status != I40E_SUCCESS)
 			PMD_DRV_LOG(ERR, "Failed to set max frame size at port level");
-- 
2.25.1