From: Ankur Dwivedi <adwivedi@marvell.com>
To: <dev@dpdk.org>
Cc: <anoobj@marvell.com>, <gakhil@marvell.com>,
<ktejasree@marvell.com>, <jerinj@marvell.com>,
<david.marchand@redhat.com>, Ankur Dwivedi <adwivedi@marvell.com>,
<stable@dpdk.org>
Subject: [PATCH v2 1/2] common/cpt: fix compilation with GCC 12
Date: Fri, 17 Jun 2022 19:09:29 +0530 [thread overview]
Message-ID: <20220617133930.5063-2-adwivedi@marvell.com> (raw)
In-Reply-To: <20220617133930.5063-1-adwivedi@marvell.com>
The following warning is observed with GCC 12 compilation:
In function ‘fill_sg_comp_from_iov’,
inlined from ‘cpt_zuc_snow3g_enc_prep’ at
../drivers/common/cpt/cpt_ucode.h:1672:9,
inlined from ‘cpt_fc_enc_hmac_prep’ at
../drivers/common/cpt/cpt_ucode.h:2472:3,
inlined from ‘fill_digest_params’ at
../drivers/common/cpt/cpt_ucode.h:3548:14,
inlined from ‘otx_cpt_enq_single_sym’ at
../drivers/crypto/octeontx/otx_cryptodev_ops.c:541:9,
inlined from ‘otx_cpt_enq_single_sym_sessless’ at
../drivers/crypto/octeontx/otx_cryptodev_ops.c:584:8,
inlined from ‘otx_cpt_enq_single’ at
../drivers/crypto/octeontx/otx_cryptodev_ops.c:611:11,
inlined from ‘otx_cpt_pkt_enqueue’ at
../drivers/crypto/octeontx/otx_cryptodev_ops.c:643:9,
inlined from ‘otx_cpt_enqueue_sym’ at
../drivers/crypto/octeontx/otx_cryptodev_ops.c:668:9:
../drivers/common/cpt/cpt_ucode.h:415:36: warning: array subscript 0 is
outside array bounds of ‘buf_ptr_t[0]’ {aka ‘struct buf_ptr[]’}
[-Warray-bounds]
415 | e_dma_addr = bufs[j].dma_addr;
| ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~
../drivers/common/cpt/cpt_ucode.h:416:48: warning: array subscript 0 is
outside array bounds of ‘buf_ptr_t[0]’ {aka ‘struct buf_ptr[]’}
[-Warray-bounds]
416 | e_len = (size > bufs[j].size) ?
| ~~~~~~~^~~~~
This patch resolves the warning.
Bugzilla ID: 861
Fixes: 9be415daf469 ("common/cpt: add common defines for microcode")
Fixes: b74652f3a91f ("common/cpt: add microcode interface for encryption")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Reviewed-by: Anoob Joseph <anoobj@marvell.com>
Reviewed-by: Jerin Jacob Kollanukkaran <jerinj@marvell.com>
---
drivers/common/cpt/cpt_mcode_defines.h | 2 +-
drivers/common/cpt/cpt_ucode.h | 21 ++++++++++-----------
2 files changed, 11 insertions(+), 12 deletions(-)
diff --git a/drivers/common/cpt/cpt_mcode_defines.h b/drivers/common/cpt/cpt_mcode_defines.h
index f16ee44297..e6dcb7674c 100644
--- a/drivers/common/cpt/cpt_mcode_defines.h
+++ b/drivers/common/cpt/cpt_mcode_defines.h
@@ -387,7 +387,7 @@ typedef struct buf_ptr {
/* IOV Pointer */
typedef struct{
int buf_cnt;
- buf_ptr_t bufs[0];
+ buf_ptr_t bufs[];
} iov_ptr_t;
typedef struct fc_params {
diff --git a/drivers/common/cpt/cpt_ucode.h b/drivers/common/cpt/cpt_ucode.h
index e1f2f6005d..22aabab6ac 100644
--- a/drivers/common/cpt/cpt_ucode.h
+++ b/drivers/common/cpt/cpt_ucode.h
@@ -394,27 +394,26 @@ fill_sg_comp_from_iov(sg_comp_t *list,
int32_t j;
uint32_t extra_len = extra_buf ? extra_buf->size : 0;
uint32_t size = *psize;
- buf_ptr_t *bufs;
- bufs = from->bufs;
for (j = 0; (j < from->buf_cnt) && size; j++) {
+ phys_addr_t dma_addr = from->bufs[j].dma_addr;
+ uint32_t buf_sz = from->bufs[j].size;
+ sg_comp_t *to = &list[i >> 2];
phys_addr_t e_dma_addr;
uint32_t e_len;
- sg_comp_t *to = &list[i >> 2];
if (unlikely(from_offset)) {
- if (from_offset >= bufs[j].size) {
- from_offset -= bufs[j].size;
+ if (from_offset >= buf_sz) {
+ from_offset -= buf_sz;
continue;
}
- e_dma_addr = bufs[j].dma_addr + from_offset;
- e_len = (size > (bufs[j].size - from_offset)) ?
- (bufs[j].size - from_offset) : size;
+ e_dma_addr = dma_addr + from_offset;
+ e_len = (size > (buf_sz - from_offset)) ?
+ (buf_sz - from_offset) : size;
from_offset = 0;
} else {
- e_dma_addr = bufs[j].dma_addr;
- e_len = (size > bufs[j].size) ?
- bufs[j].size : size;
+ e_dma_addr = dma_addr;
+ e_len = (size > buf_sz) ? buf_sz : size;
}
to->u.s.len[i % 4] = rte_cpu_to_be_16(e_len);
--
2.28.0
next prev parent reply other threads:[~2022-06-17 13:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20220617061432.2685-1-adwivedi@marvell.com>
2022-06-17 6:14 ` [PATCH " Ankur Dwivedi
2022-06-17 12:07 ` David Marchand
2022-06-17 12:39 ` [EXT] " Ankur Dwivedi
2022-06-17 6:14 ` [PATCH 2/2] crypto/cnxk: " Ankur Dwivedi
[not found] ` <20220617133930.5063-1-adwivedi@marvell.com>
2022-06-17 13:39 ` Ankur Dwivedi [this message]
2022-06-17 13:39 ` [PATCH v2 " Ankur Dwivedi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220617133930.5063-2-adwivedi@marvell.com \
--to=adwivedi@marvell.com \
--cc=anoobj@marvell.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=jerinj@marvell.com \
--cc=ktejasree@marvell.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).