From: David Marchand <david.marchand@redhat.com>
To: dev@dpdk.org
Cc: gakhil@marvell.com, chandu@amd.com, stable@dpdk.org,
Amaranath Somalapuram <asomalap@amd.com>
Subject: [PATCH 3/4] crypto/ccp: fix IOVA handling
Date: Fri, 9 Sep 2022 17:04:10 +0200 [thread overview]
Message-ID: <20220909150411.3702860-4-david.marchand@redhat.com> (raw)
In-Reply-To: <20220909150411.3702860-1-david.marchand@redhat.com>
Using IOVA or physical addresses is something that the user (via
--iova-mode=) or the bus code decides.
The crypto/ccp PCI driver should only use rte_mem_virt2iova.
It should not try to decide what to use solely based on the kmod
the PCI device is bound to.
While at it, the global variable sha_ctx looks unsafe and unneeded.
Remove it.
Fixes: 09a0fd736a08 ("crypto/ccp: enable IOMMU")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
---
drivers/crypto/ccp/ccp_crypto.c | 105 ++++++-------------------------
drivers/crypto/ccp/ccp_dev.c | 9 +--
drivers/crypto/ccp/ccp_pci.c | 34 ----------
drivers/crypto/ccp/ccp_pci.h | 3 -
drivers/crypto/ccp/rte_ccp_pmd.c | 3 -
5 files changed, 19 insertions(+), 135 deletions(-)
diff --git a/drivers/crypto/ccp/ccp_crypto.c b/drivers/crypto/ccp/ccp_crypto.c
index 4bab18323b..351d8ac63e 100644
--- a/drivers/crypto/ccp/ccp_crypto.c
+++ b/drivers/crypto/ccp/ccp_crypto.c
@@ -33,8 +33,6 @@
#include <openssl/err.h>
#include <openssl/hmac.h>
-extern int iommu_mode;
-void *sha_ctx;
/* SHA initial context values */
uint32_t ccp_sha1_init[SHA_COMMON_DIGEST_SIZE / sizeof(uint32_t)] = {
SHA1_H4, SHA1_H3,
@@ -748,13 +746,8 @@ ccp_configure_session_cipher(struct ccp_session *sess,
CCP_LOG_ERR("Invalid CCP Engine");
return -ENOTSUP;
}
- if (iommu_mode == 2) {
- sess->cipher.nonce_phys = rte_mem_virt2iova(sess->cipher.nonce);
- sess->cipher.key_phys = rte_mem_virt2iova(sess->cipher.key_ccp);
- } else {
- sess->cipher.nonce_phys = rte_mem_virt2phy(sess->cipher.nonce);
- sess->cipher.key_phys = rte_mem_virt2phy(sess->cipher.key_ccp);
- }
+ sess->cipher.nonce_phys = rte_mem_virt2iova(sess->cipher.nonce);
+ sess->cipher.key_phys = rte_mem_virt2iova(sess->cipher.key_ccp);
return 0;
}
@@ -793,7 +786,6 @@ ccp_configure_session_auth(struct ccp_session *sess,
sess->auth.ctx = (void *)ccp_sha1_init;
sess->auth.ctx_len = CCP_SB_BYTES;
sess->auth.offset = CCP_SB_BYTES - SHA1_DIGEST_SIZE;
- rte_memcpy(sha_ctx, sess->auth.ctx, SHA_COMMON_DIGEST_SIZE);
break;
case RTE_CRYPTO_AUTH_SHA1_HMAC:
if (sess->auth_opt) {
@@ -832,7 +824,6 @@ ccp_configure_session_auth(struct ccp_session *sess,
sess->auth.ctx = (void *)ccp_sha224_init;
sess->auth.ctx_len = CCP_SB_BYTES;
sess->auth.offset = CCP_SB_BYTES - SHA224_DIGEST_SIZE;
- rte_memcpy(sha_ctx, sess->auth.ctx, SHA256_DIGEST_SIZE);
break;
case RTE_CRYPTO_AUTH_SHA224_HMAC:
if (sess->auth_opt) {
@@ -895,7 +886,6 @@ ccp_configure_session_auth(struct ccp_session *sess,
sess->auth.ctx = (void *)ccp_sha256_init;
sess->auth.ctx_len = CCP_SB_BYTES;
sess->auth.offset = CCP_SB_BYTES - SHA256_DIGEST_SIZE;
- rte_memcpy(sha_ctx, sess->auth.ctx, SHA256_DIGEST_SIZE);
break;
case RTE_CRYPTO_AUTH_SHA256_HMAC:
if (sess->auth_opt) {
@@ -958,7 +948,6 @@ ccp_configure_session_auth(struct ccp_session *sess,
sess->auth.ctx = (void *)ccp_sha384_init;
sess->auth.ctx_len = CCP_SB_BYTES << 1;
sess->auth.offset = (CCP_SB_BYTES << 1) - SHA384_DIGEST_SIZE;
- rte_memcpy(sha_ctx, sess->auth.ctx, SHA512_DIGEST_SIZE);
break;
case RTE_CRYPTO_AUTH_SHA384_HMAC:
if (sess->auth_opt) {
@@ -1023,7 +1012,6 @@ ccp_configure_session_auth(struct ccp_session *sess,
sess->auth.ctx = (void *)ccp_sha512_init;
sess->auth.ctx_len = CCP_SB_BYTES << 1;
sess->auth.offset = (CCP_SB_BYTES << 1) - SHA512_DIGEST_SIZE;
- rte_memcpy(sha_ctx, sess->auth.ctx, SHA512_DIGEST_SIZE);
break;
case RTE_CRYPTO_AUTH_SHA512_HMAC:
if (sess->auth_opt) {
@@ -1173,13 +1161,8 @@ ccp_configure_session_aead(struct ccp_session *sess,
CCP_LOG_ERR("Unsupported aead algo");
return -ENOTSUP;
}
- if (iommu_mode == 2) {
- sess->cipher.nonce_phys = rte_mem_virt2iova(sess->cipher.nonce);
- sess->cipher.key_phys = rte_mem_virt2iova(sess->cipher.key_ccp);
- } else {
- sess->cipher.nonce_phys = rte_mem_virt2phy(sess->cipher.nonce);
- sess->cipher.key_phys = rte_mem_virt2phy(sess->cipher.key_ccp);
- }
+ sess->cipher.nonce_phys = rte_mem_virt2iova(sess->cipher.nonce);
+ sess->cipher.key_phys = rte_mem_virt2iova(sess->cipher.key_ccp);
return 0;
}
@@ -1594,14 +1577,8 @@ ccp_perform_hmac(struct rte_crypto_op *op,
op->sym->auth.data.offset);
append_ptr = (void *)rte_pktmbuf_append(op->sym->m_src,
session->auth.ctx_len);
- if (iommu_mode == 2) {
- dest_addr = (phys_addr_t)rte_mem_virt2iova(append_ptr);
- pst.src_addr = (phys_addr_t)rte_mem_virt2iova((void *)addr);
- } else {
- dest_addr = (phys_addr_t)rte_mem_virt2phy(append_ptr);
- pst.src_addr = (phys_addr_t)rte_mem_virt2phy((void *)addr);
- }
- dest_addr_t = dest_addr;
+ dest_addr_t = dest_addr = (phys_addr_t)rte_mem_virt2iova(append_ptr);
+ pst.src_addr = (phys_addr_t)rte_mem_virt2iova((void *)addr);
/** Load PHash1 to LSB*/
pst.dest_addr = (phys_addr_t)(cmd_q->sb_sha * CCP_SB_BYTES);
@@ -1683,10 +1660,7 @@ ccp_perform_hmac(struct rte_crypto_op *op,
/** Load PHash2 to LSB*/
addr += session->auth.ctx_len;
- if (iommu_mode == 2)
- pst.src_addr = (phys_addr_t)rte_mem_virt2iova((void *)addr);
- else
- pst.src_addr = (phys_addr_t)rte_mem_virt2phy((void *)addr);
+ pst.src_addr = (phys_addr_t)rte_mem_virt2iova((void *)addr);
pst.dest_addr = (phys_addr_t)(cmd_q->sb_sha * CCP_SB_BYTES);
pst.len = session->auth.ctx_len;
pst.dir = 1;
@@ -1774,14 +1748,8 @@ ccp_perform_sha(struct rte_crypto_op *op,
op->sym->auth.data.offset);
append_ptr = (void *)rte_pktmbuf_append(op->sym->m_src,
session->auth.ctx_len);
- if (iommu_mode == 2) {
- dest_addr = (phys_addr_t)rte_mem_virt2iova(append_ptr);
- pst.src_addr = (phys_addr_t)sha_ctx;
- } else {
- dest_addr = (phys_addr_t)rte_mem_virt2phy(append_ptr);
- pst.src_addr = (phys_addr_t)rte_mem_virt2phy((void *)
- session->auth.ctx);
- }
+ pst.src_addr = (phys_addr_t)rte_mem_virt2iova((void *)session->auth.ctx);
+ dest_addr = (phys_addr_t)rte_mem_virt2iova(append_ptr);
/** Passthru sha context*/
@@ -1871,15 +1839,8 @@ ccp_perform_sha3_hmac(struct rte_crypto_op *op,
CCP_LOG_ERR("CCP MBUF append failed\n");
return -1;
}
- if (iommu_mode == 2) {
- dest_addr = (phys_addr_t)rte_mem_virt2iova((void *)append_ptr);
- ctx_paddr = (phys_addr_t)rte_mem_virt2iova(
- session->auth.pre_compute);
- } else {
- dest_addr = (phys_addr_t)rte_mem_virt2phy((void *)append_ptr);
- ctx_paddr = (phys_addr_t)rte_mem_virt2phy(
- session->auth.pre_compute);
- }
+ dest_addr = (phys_addr_t)rte_mem_virt2iova((void *)append_ptr);
+ ctx_paddr = (phys_addr_t)rte_mem_virt2iova(session->auth.pre_compute);
dest_addr_t = dest_addr + (session->auth.ctx_len / 2);
desc = &cmd_q->qbase_desc[cmd_q->qidx];
memset(desc, 0, Q_DESC_SIZE);
@@ -2017,13 +1978,8 @@ ccp_perform_sha3(struct rte_crypto_op *op,
CCP_LOG_ERR("CCP MBUF append failed\n");
return -1;
}
- if (iommu_mode == 2) {
- dest_addr = (phys_addr_t)rte_mem_virt2iova((void *)append_ptr);
- ctx_paddr = (phys_addr_t)rte_mem_virt2iova((void *)ctx_addr);
- } else {
- dest_addr = (phys_addr_t)rte_mem_virt2phy((void *)append_ptr);
- ctx_paddr = (phys_addr_t)rte_mem_virt2phy((void *)ctx_addr);
- }
+ dest_addr = (phys_addr_t)rte_mem_virt2iova((void *)append_ptr);
+ ctx_paddr = (phys_addr_t)rte_mem_virt2iova((void *)ctx_addr);
ctx_addr = session->auth.sha3_ctx;
@@ -2099,13 +2055,7 @@ ccp_perform_aes_cmac(struct rte_crypto_op *op,
ctx_addr = session->auth.pre_compute;
memset(ctx_addr, 0, AES_BLOCK_SIZE);
- if (iommu_mode == 2)
- pst.src_addr = (phys_addr_t)rte_mem_virt2iova(
- (void *)ctx_addr);
- else
- pst.src_addr = (phys_addr_t)rte_mem_virt2phy(
- (void *)ctx_addr);
-
+ pst.src_addr = (phys_addr_t)rte_mem_virt2iova((void *)ctx_addr);
pst.dest_addr = (phys_addr_t)(cmd_q->sb_iv * CCP_SB_BYTES);
pst.len = CCP_SB_BYTES;
pst.dir = 1;
@@ -2143,12 +2093,7 @@ ccp_perform_aes_cmac(struct rte_crypto_op *op,
} else {
ctx_addr = session->auth.pre_compute + CCP_SB_BYTES;
memset(ctx_addr, 0, AES_BLOCK_SIZE);
- if (iommu_mode == 2)
- pst.src_addr = (phys_addr_t)rte_mem_virt2iova(
- (void *)ctx_addr);
- else
- pst.src_addr = (phys_addr_t)rte_mem_virt2phy(
- (void *)ctx_addr);
+ pst.src_addr = (phys_addr_t)rte_mem_virt2iova((void *)ctx_addr);
pst.dest_addr = (phys_addr_t)(cmd_q->sb_iv * CCP_SB_BYTES);
pst.len = CCP_SB_BYTES;
pst.dir = 1;
@@ -2342,12 +2287,7 @@ ccp_perform_3des(struct rte_crypto_op *op,
rte_memcpy(lsb_buf + (CCP_SB_BYTES - session->iv.length),
iv, session->iv.length);
- if (iommu_mode == 2)
- pst.src_addr = (phys_addr_t)rte_mem_virt2iova(
- (void *) lsb_buf);
- else
- pst.src_addr = (phys_addr_t)rte_mem_virt2phy(
- (void *) lsb_buf);
+ pst.src_addr = (phys_addr_t)rte_mem_virt2iova((void *) lsb_buf);
pst.dest_addr = (phys_addr_t)(cmd_q->sb_iv * CCP_SB_BYTES);
pst.len = CCP_SB_BYTES;
pst.dir = 1;
@@ -2370,11 +2310,7 @@ ccp_perform_3des(struct rte_crypto_op *op,
else
dest_addr = src_addr;
- if (iommu_mode == 2)
- key_addr = rte_mem_virt2iova(session->cipher.key_ccp);
- else
- key_addr = rte_mem_virt2phy(session->cipher.key_ccp);
-
+ key_addr = rte_mem_virt2iova(session->cipher.key_ccp);
desc = &cmd_q->qbase_desc[cmd_q->qidx];
memset(desc, 0, Q_DESC_SIZE);
@@ -2768,12 +2704,7 @@ process_ops_to_enqueue(struct ccp_qp *qp,
b_info->lsb_buf_idx = 0;
b_info->desccnt = 0;
b_info->cmd_q = cmd_q;
- if (iommu_mode == 2)
- b_info->lsb_buf_phys =
- (phys_addr_t)rte_mem_virt2iova((void *)b_info->lsb_buf);
- else
- b_info->lsb_buf_phys =
- (phys_addr_t)rte_mem_virt2phy((void *)b_info->lsb_buf);
+ b_info->lsb_buf_phys = (phys_addr_t)rte_mem_virt2iova((void *)b_info->lsb_buf);
rte_atomic64_sub(&b_info->cmd_q->free_slots, slots_req);
diff --git a/drivers/crypto/ccp/ccp_dev.c b/drivers/crypto/ccp/ccp_dev.c
index 410e62121e..14c54929c4 100644
--- a/drivers/crypto/ccp/ccp_dev.c
+++ b/drivers/crypto/ccp/ccp_dev.c
@@ -23,7 +23,6 @@
#include "ccp_pci.h"
#include "ccp_pmd_private.h"
-int iommu_mode;
struct ccp_list ccp_list = TAILQ_HEAD_INITIALIZER(ccp_list);
static int ccp_dev_id;
@@ -652,7 +651,7 @@ is_ccp_device(const char *dirname,
static int
ccp_probe_device(int ccp_type, struct rte_pci_device *pci_dev)
{
- struct ccp_device *ccp_dev = NULL;
+ struct ccp_device *ccp_dev;
ccp_dev = rte_zmalloc("ccp_device", sizeof(*ccp_dev),
RTE_CACHE_LINE_SIZE);
@@ -683,16 +682,10 @@ ccp_probe_devices(struct rte_pci_device *pci_dev,
struct dirent *d;
DIR *dir;
int ret = 0;
- int module_idx = 0;
uint16_t domain;
uint8_t bus, devid, function;
char dirname[PATH_MAX];
- module_idx = ccp_check_pci_uio_module();
- if (module_idx < 0)
- return -1;
-
- iommu_mode = module_idx;
TAILQ_INIT(&ccp_list);
dir = opendir(SYSFS_PCI_DEVICES);
if (dir == NULL)
diff --git a/drivers/crypto/ccp/ccp_pci.c b/drivers/crypto/ccp/ccp_pci.c
index c941e222c7..bd1a037f76 100644
--- a/drivers/crypto/ccp/ccp_pci.c
+++ b/drivers/crypto/ccp/ccp_pci.c
@@ -11,40 +11,6 @@
#include <rte_string_fns.h>
#include "ccp_pci.h"
-#include "ccp_pmd_private.h"
-
-static const char * const uio_module_names[] = {
- "igb_uio",
- "uio_pci_generic",
- "vfio_pci"
-};
-
-int
-ccp_check_pci_uio_module(void)
-{
- FILE *fp;
- int i;
- char buf[BUFSIZ];
-
- fp = fopen(PROC_MODULES, "r");
- if (fp == NULL)
- return -1;
- i = 0;
- while (uio_module_names[i] != NULL) {
- while (fgets(buf, sizeof(buf), fp) != NULL) {
- if (!strncmp(buf, uio_module_names[i],
- strlen(uio_module_names[i]))) {
- fclose(fp);
- return i;
- }
- }
- i++;
- rewind(fp);
- }
- fclose(fp);
- CCP_LOG_DBG("Insert igb_uio or uio_pci_generic kernel module(s)");
- return -1;/* uio not inserted */
-}
/*
* split up a pci address into its constituent parts.
diff --git a/drivers/crypto/ccp/ccp_pci.h b/drivers/crypto/ccp/ccp_pci.h
index 7ed3bac406..f393a04d6f 100644
--- a/drivers/crypto/ccp/ccp_pci.h
+++ b/drivers/crypto/ccp/ccp_pci.h
@@ -10,9 +10,6 @@
#include <rte_bus_pci.h>
#define SYSFS_PCI_DEVICES "/sys/bus/pci/devices"
-#define PROC_MODULES "/proc/modules"
-
-int ccp_check_pci_uio_module(void);
int ccp_parse_pci_addr_format(const char *buf, int bufsize, uint16_t *domain,
uint8_t *bus, uint8_t *devid, uint8_t *function);
diff --git a/drivers/crypto/ccp/rte_ccp_pmd.c b/drivers/crypto/ccp/rte_ccp_pmd.c
index c5ec952e36..0d84c8cd0e 100644
--- a/drivers/crypto/ccp/rte_ccp_pmd.c
+++ b/drivers/crypto/ccp/rte_ccp_pmd.c
@@ -22,7 +22,6 @@
static unsigned int ccp_pmd_init_done;
uint8_t ccp_cryptodev_driver_id;
uint8_t cryptodev_cnt;
-extern void *sha_ctx;
struct ccp_pmd_init_params {
struct rte_cryptodev_pmd_init_params def_p;
@@ -213,7 +212,6 @@ cryptodev_ccp_remove(struct rte_pci_device *pci_dev)
return -ENODEV;
ccp_pmd_init_done = 0;
- rte_free(sha_ctx);
RTE_LOG(INFO, PMD, "Closing ccp device %s on numa socket %u\n",
name, rte_socket_id());
@@ -300,7 +298,6 @@ cryptodev_ccp_probe(struct rte_pci_driver *pci_drv __rte_unused,
.auth_opt = CCP_PMD_AUTH_OPT_CCP,
};
- sha_ctx = (void *)rte_malloc(NULL, SHA512_DIGEST_SIZE, 64);
if (ccp_pmd_init_done) {
RTE_LOG(INFO, PMD, "CCP PMD already initialized\n");
return -EFAULT;
--
2.37.2
next prev parent reply other threads:[~2022-09-09 15:04 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20220909150411.3702860-1-david.marchand@redhat.com>
2022-09-09 15:04 ` [PATCH 1/4] crypto/ccp: remove some printf David Marchand
2022-09-09 15:04 ` [PATCH 2/4] crypto/ccp: remove some dead code for UIO David Marchand
2022-09-09 15:04 ` David Marchand [this message]
2022-09-09 15:04 ` [PATCH 4/4] crypto/ccp: fix PCI probing David Marchand
[not found] ` <20221004095132.198777-1-david.marchand@redhat.com>
2022-10-04 9:51 ` [PATCH v2 1/4] crypto/ccp: remove some printf David Marchand
2023-01-13 11:58 ` Uttarwar, Sunil Prakashrao
2023-01-30 18:42 ` [EXT] " Akhil Goyal
2022-10-04 9:51 ` [PATCH v2 2/4] crypto/ccp: remove some dead code for UIO David Marchand
2023-01-13 12:00 ` Uttarwar, Sunil Prakashrao
2022-10-04 9:51 ` [PATCH v2 3/4] crypto/ccp: fix IOVA handling David Marchand
2023-01-13 12:00 ` Uttarwar, Sunil Prakashrao
2022-10-04 9:51 ` [PATCH v2 4/4] crypto/ccp: fix PCI probing David Marchand
2023-03-02 11:43 ` [PATCH v2] " David Marchand
2023-03-06 12:05 ` Uttarwar, Sunil Prakashrao
2023-03-11 18:49 ` Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220909150411.3702860-4-david.marchand@redhat.com \
--to=david.marchand@redhat.com \
--cc=asomalap@amd.com \
--cc=chandu@amd.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).