From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>, stable@dpdk.org
Subject: [PATCH v2 05/10] net/ngbe: fix packet type to parse from offload flags
Date: Thu, 2 Feb 2023 17:21:27 +0800 [thread overview]
Message-ID: <20230202092132.3271910-6-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20230202092132.3271910-1-jiawenwu@trustnetic.com>
Context descriptors which contains the length of each packet layer and
the packet type are needed when Tx checksum offload or TSO is on. If the
packet type and length do not strictly match, it will cause Tx ring hang.
In some external applications, developers may fill in wrong packet_type
in rte_mbuf for Tx path. For example, they encap/decap the packets but
did not refill the packet_type. To prevent this, change it to parse from
ol_flags.
And remove redundant tunnel type since the NIC does not support it.
Fixes: 9f3206140274 ("net/ngbe: support TSO")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/ngbe_rxtx.c | 92 +++++++++---------------------------
1 file changed, 23 insertions(+), 69 deletions(-)
diff --git a/drivers/net/ngbe/ngbe_rxtx.c b/drivers/net/ngbe/ngbe_rxtx.c
index 9a646cb6a7..0dce4079b5 100644
--- a/drivers/net/ngbe/ngbe_rxtx.c
+++ b/drivers/net/ngbe/ngbe_rxtx.c
@@ -24,15 +24,11 @@
/* Bit Mask to indicate what bits required for building Tx context */
static const u64 NGBE_TX_OFFLOAD_MASK = (RTE_MBUF_F_TX_IP_CKSUM |
- RTE_MBUF_F_TX_OUTER_IPV6 |
- RTE_MBUF_F_TX_OUTER_IPV4 |
RTE_MBUF_F_TX_IPV6 |
RTE_MBUF_F_TX_IPV4 |
RTE_MBUF_F_TX_VLAN |
RTE_MBUF_F_TX_L4_MASK |
RTE_MBUF_F_TX_TCP_SEG |
- RTE_MBUF_F_TX_TUNNEL_MASK |
- RTE_MBUF_F_TX_OUTER_IP_CKSUM |
NGBE_TX_IEEE1588_TMST);
#define NGBE_TX_OFFLOAD_NOTSUP_MASK \
@@ -333,34 +329,15 @@ ngbe_set_xmit_ctx(struct ngbe_tx_queue *txq,
}
vlan_macip_lens = NGBE_TXD_IPLEN(tx_offload.l3_len >> 1);
-
- if (ol_flags & RTE_MBUF_F_TX_TUNNEL_MASK) {
- tx_offload_mask.outer_tun_len |= ~0;
- tx_offload_mask.outer_l2_len |= ~0;
- tx_offload_mask.outer_l3_len |= ~0;
- tx_offload_mask.l2_len |= ~0;
- tunnel_seed = NGBE_TXD_ETUNLEN(tx_offload.outer_tun_len >> 1);
- tunnel_seed |= NGBE_TXD_EIPLEN(tx_offload.outer_l3_len >> 2);
-
- switch (ol_flags & RTE_MBUF_F_TX_TUNNEL_MASK) {
- case RTE_MBUF_F_TX_TUNNEL_IPIP:
- /* for non UDP / GRE tunneling, set to 0b */
- break;
- default:
- PMD_TX_LOG(ERR, "Tunnel type not supported");
- return;
- }
- vlan_macip_lens |= NGBE_TXD_MACLEN(tx_offload.outer_l2_len);
- } else {
- tunnel_seed = 0;
- vlan_macip_lens |= NGBE_TXD_MACLEN(tx_offload.l2_len);
- }
+ vlan_macip_lens |= NGBE_TXD_MACLEN(tx_offload.l2_len);
if (ol_flags & RTE_MBUF_F_TX_VLAN) {
tx_offload_mask.vlan_tci |= ~0;
vlan_macip_lens |= NGBE_TXD_VLAN(tx_offload.vlan_tci);
}
+ tunnel_seed = 0;
+
txq->ctx_cache[ctx_idx].flags = ol_flags;
txq->ctx_cache[ctx_idx].tx_offload.data[0] =
tx_offload_mask.data[0] & tx_offload.data[0];
@@ -449,16 +426,10 @@ tx_desc_ol_flags_to_cmdtype(uint64_t ol_flags)
return cmdtype;
}
-static inline uint8_t
-tx_desc_ol_flags_to_ptid(uint64_t oflags, uint32_t ptype)
+static inline uint32_t
+tx_desc_ol_flags_to_ptype(uint64_t oflags)
{
- bool tun;
-
- if (ptype)
- return ngbe_encode_ptype(ptype);
-
- /* Only support flags in NGBE_TX_OFFLOAD_MASK */
- tun = !!(oflags & RTE_MBUF_F_TX_TUNNEL_MASK);
+ uint32_t ptype;
/* L2 level */
ptype = RTE_PTYPE_L2_ETHER;
@@ -466,41 +437,36 @@ tx_desc_ol_flags_to_ptid(uint64_t oflags, uint32_t ptype)
ptype |= RTE_PTYPE_L2_ETHER_VLAN;
/* L3 level */
- if (oflags & (RTE_MBUF_F_TX_OUTER_IPV4 | RTE_MBUF_F_TX_OUTER_IP_CKSUM))
- ptype |= RTE_PTYPE_L3_IPV4;
- else if (oflags & (RTE_MBUF_F_TX_OUTER_IPV6))
- ptype |= RTE_PTYPE_L3_IPV6;
-
if (oflags & (RTE_MBUF_F_TX_IPV4 | RTE_MBUF_F_TX_IP_CKSUM))
- ptype |= (tun ? RTE_PTYPE_INNER_L3_IPV4 : RTE_PTYPE_L3_IPV4);
+ ptype |= RTE_PTYPE_L3_IPV4;
else if (oflags & (RTE_MBUF_F_TX_IPV6))
- ptype |= (tun ? RTE_PTYPE_INNER_L3_IPV6 : RTE_PTYPE_L3_IPV6);
+ ptype |= RTE_PTYPE_L3_IPV6;
/* L4 level */
switch (oflags & (RTE_MBUF_F_TX_L4_MASK)) {
case RTE_MBUF_F_TX_TCP_CKSUM:
- ptype |= (tun ? RTE_PTYPE_INNER_L4_TCP : RTE_PTYPE_L4_TCP);
+ ptype |= RTE_PTYPE_L4_TCP;
break;
case RTE_MBUF_F_TX_UDP_CKSUM:
- ptype |= (tun ? RTE_PTYPE_INNER_L4_UDP : RTE_PTYPE_L4_UDP);
+ ptype |= RTE_PTYPE_L4_UDP;
break;
case RTE_MBUF_F_TX_SCTP_CKSUM:
- ptype |= (tun ? RTE_PTYPE_INNER_L4_SCTP : RTE_PTYPE_L4_SCTP);
+ ptype |= RTE_PTYPE_L4_SCTP;
break;
}
if (oflags & RTE_MBUF_F_TX_TCP_SEG)
- ptype |= (tun ? RTE_PTYPE_INNER_L4_TCP : RTE_PTYPE_L4_TCP);
-
- /* Tunnel */
- switch (oflags & RTE_MBUF_F_TX_TUNNEL_MASK) {
- case RTE_MBUF_F_TX_TUNNEL_IPIP:
- case RTE_MBUF_F_TX_TUNNEL_IP:
- ptype |= RTE_PTYPE_L2_ETHER |
- RTE_PTYPE_L3_IPV4 |
- RTE_PTYPE_TUNNEL_IP;
- break;
- }
+ ptype |= RTE_PTYPE_L4_TCP;
+
+ return ptype;
+}
+
+static inline uint8_t
+tx_desc_ol_flags_to_ptid(uint64_t oflags)
+{
+ uint32_t ptype;
+
+ ptype = tx_desc_ol_flags_to_ptype(oflags);
return ngbe_encode_ptype(ptype);
}
@@ -622,16 +588,12 @@ ngbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
/* If hardware offload required */
tx_ol_req = ol_flags & NGBE_TX_OFFLOAD_MASK;
if (tx_ol_req) {
- tx_offload.ptid = tx_desc_ol_flags_to_ptid(tx_ol_req,
- tx_pkt->packet_type);
+ tx_offload.ptid = tx_desc_ol_flags_to_ptid(tx_ol_req);
tx_offload.l2_len = tx_pkt->l2_len;
tx_offload.l3_len = tx_pkt->l3_len;
tx_offload.l4_len = tx_pkt->l4_len;
tx_offload.vlan_tci = tx_pkt->vlan_tci;
tx_offload.tso_segsz = tx_pkt->tso_segsz;
- tx_offload.outer_l2_len = tx_pkt->outer_l2_len;
- tx_offload.outer_l3_len = tx_pkt->outer_l3_len;
- tx_offload.outer_tun_len = 0;
/* If new context need be built or reuse the exist ctx*/
ctx = what_ctx_update(txq, tx_ol_req, tx_offload);
@@ -752,10 +714,6 @@ ngbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
*/
pkt_len -= (tx_offload.l2_len +
tx_offload.l3_len + tx_offload.l4_len);
- pkt_len -=
- (tx_pkt->ol_flags & RTE_MBUF_F_TX_TUNNEL_MASK)
- ? tx_offload.outer_l2_len +
- tx_offload.outer_l3_len : 0;
}
/*
@@ -1939,12 +1897,8 @@ ngbe_get_tx_port_offloads(struct rte_eth_dev *dev)
RTE_ETH_TX_OFFLOAD_UDP_CKSUM |
RTE_ETH_TX_OFFLOAD_TCP_CKSUM |
RTE_ETH_TX_OFFLOAD_SCTP_CKSUM |
- RTE_ETH_TX_OFFLOAD_OUTER_IPV4_CKSUM |
RTE_ETH_TX_OFFLOAD_TCP_TSO |
RTE_ETH_TX_OFFLOAD_UDP_TSO |
- RTE_ETH_TX_OFFLOAD_UDP_TNL_TSO |
- RTE_ETH_TX_OFFLOAD_IP_TNL_TSO |
- RTE_ETH_TX_OFFLOAD_IPIP_TNL_TSO |
RTE_ETH_TX_OFFLOAD_MULTI_SEGS;
if (hw->is_pf)
--
2.27.0
next prev parent reply other threads:[~2023-02-02 9:25 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20230118060039.3074016-1-jiawenwu@trustnetic.com>
2023-01-18 6:00 ` [PATCH 1/8] net/txgbe: fix Rx buffer size in configure register Jiawen Wu
2023-01-27 15:36 ` Ferruh Yigit
2023-02-01 2:34 ` Jiawen Wu
2023-02-01 10:40 ` Ferruh Yigit
2023-01-18 6:00 ` [PATCH 2/8] net/txgbe: fix default signal quality value for KX/KX4 Jiawen Wu
2023-01-18 6:00 ` [PATCH 3/8] net/txgbe: fix packet type to parse from offload flags Jiawen Wu
2023-01-27 15:36 ` Ferruh Yigit
2023-02-01 3:14 ` Jiawen Wu
2023-02-01 10:41 ` Ferruh Yigit
2023-01-18 6:00 ` [PATCH 4/8] net/ngbe: " Jiawen Wu
2023-01-27 15:37 ` Ferruh Yigit
2023-01-18 6:00 ` [PATCH 5/8] net/ngbe: add spinlock protection on YT PHY Jiawen Wu
[not found] ` <20230202092132.3271910-1-jiawenwu@trustnetic.com>
2023-02-02 9:21 ` [PATCH v2 01/10] net/ngbe: fix Rx buffer size in configure register Jiawen Wu
2023-02-08 10:28 ` Ferruh Yigit
2023-02-09 9:00 ` Jiawen Wu
2023-02-14 8:15 ` Jiawen Wu
2023-02-14 9:55 ` Ferruh Yigit
2023-02-15 9:35 ` Ferruh Yigit
2023-02-15 10:09 ` Jiawen Wu
2023-02-02 9:21 ` [PATCH v2 02/10] net/txgbe: " Jiawen Wu
2023-02-02 9:21 ` [PATCH v2 03/10] net/txgbe: fix default signal quality value for KX/KX4 Jiawen Wu
2023-02-02 9:21 ` [PATCH v2 04/10] net/txgbe: fix packet type to parse from offload flags Jiawen Wu
2023-02-02 9:21 ` Jiawen Wu [this message]
2023-02-02 9:21 ` [PATCH v2 06/10] net/ngbe: add spinlock protection on YT PHY Jiawen Wu
2023-02-02 9:21 ` [PATCH v2 09/10] net/txgbe: fix interrupt loss Jiawen Wu
2023-02-15 2:00 ` [PATCH v3] net/txgbe: fix Rx buffer size in configure register Jiawen Wu
2023-02-15 10:24 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230202092132.3271910-6-jiawenwu@trustnetic.com \
--to=jiawenwu@trustnetic.com \
--cc=dev@dpdk.org \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).