From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>, stable@dpdk.org
Subject: [PATCH v3] net/txgbe: fix Rx buffer size in configure register
Date: Wed, 15 Feb 2023 10:00:56 +0800 [thread overview]
Message-ID: <20230215020056.3511976-1-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20230118060039.3074016-1-jiawenwu@trustnetic.com>
When round up buffer size to 1K, to configure the register, hardware will
receive packets exceeding the buffer size in LRO mode. It will cause a
segment fault in the receive function.
Fixes: be797cbf4582 ("net/txgbe: add Rx and Tx init")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/txgbe/txgbe_rxtx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/txgbe/txgbe_rxtx.c b/drivers/net/txgbe/txgbe_rxtx.c
index ac1bba08a3..ae70ca3beb 100644
--- a/drivers/net/txgbe/txgbe_rxtx.c
+++ b/drivers/net/txgbe/txgbe_rxtx.c
@@ -4382,7 +4382,7 @@ txgbe_dev_rx_init(struct rte_eth_dev *dev)
*/
buf_size = (uint16_t)(rte_pktmbuf_data_room_size(rxq->mb_pool) -
RTE_PKTMBUF_HEADROOM);
- buf_size = ROUND_UP(buf_size, 0x1 << 10);
+ buf_size = ROUND_DOWN(buf_size, 0x1 << 10);
srrctl |= TXGBE_RXCFG_PKTLEN(buf_size);
wr32(hw, TXGBE_RXCFG(rxq->reg_idx), srrctl);
--
2.27.0
next prev parent reply other threads:[~2023-02-15 2:05 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20230118060039.3074016-1-jiawenwu@trustnetic.com>
2023-01-18 6:00 ` [PATCH 1/8] " Jiawen Wu
2023-01-27 15:36 ` Ferruh Yigit
2023-02-01 2:34 ` Jiawen Wu
2023-02-01 10:40 ` Ferruh Yigit
2023-01-18 6:00 ` [PATCH 2/8] net/txgbe: fix default signal quality value for KX/KX4 Jiawen Wu
2023-01-18 6:00 ` [PATCH 3/8] net/txgbe: fix packet type to parse from offload flags Jiawen Wu
2023-01-27 15:36 ` Ferruh Yigit
2023-02-01 3:14 ` Jiawen Wu
2023-02-01 10:41 ` Ferruh Yigit
2023-01-18 6:00 ` [PATCH 4/8] net/ngbe: " Jiawen Wu
2023-01-27 15:37 ` Ferruh Yigit
2023-01-18 6:00 ` [PATCH 5/8] net/ngbe: add spinlock protection on YT PHY Jiawen Wu
[not found] ` <20230202092132.3271910-1-jiawenwu@trustnetic.com>
2023-02-02 9:21 ` [PATCH v2 01/10] net/ngbe: fix Rx buffer size in configure register Jiawen Wu
2023-02-08 10:28 ` Ferruh Yigit
2023-02-09 9:00 ` Jiawen Wu
2023-02-14 8:15 ` Jiawen Wu
2023-02-14 9:55 ` Ferruh Yigit
2023-02-15 9:35 ` Ferruh Yigit
2023-02-15 10:09 ` Jiawen Wu
2023-02-02 9:21 ` [PATCH v2 02/10] net/txgbe: " Jiawen Wu
2023-02-02 9:21 ` [PATCH v2 03/10] net/txgbe: fix default signal quality value for KX/KX4 Jiawen Wu
2023-02-02 9:21 ` [PATCH v2 04/10] net/txgbe: fix packet type to parse from offload flags Jiawen Wu
2023-02-02 9:21 ` [PATCH v2 05/10] net/ngbe: " Jiawen Wu
2023-02-02 9:21 ` [PATCH v2 06/10] net/ngbe: add spinlock protection on YT PHY Jiawen Wu
2023-02-02 9:21 ` [PATCH v2 09/10] net/txgbe: fix interrupt loss Jiawen Wu
2023-02-15 2:00 ` Jiawen Wu [this message]
2023-02-15 10:24 ` [PATCH v3] net/txgbe: fix Rx buffer size in configure register Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230215020056.3511976-1-jiawenwu@trustnetic.com \
--to=jiawenwu@trustnetic.com \
--cc=dev@dpdk.org \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).