From: Dongdong Liu <liudongdong3@huawei.com>
To: <dev@dpdk.org>, <ferruh.yigit@amd.com>, <thomas@monjalon.net>,
<andrew.rybchenko@oktetlabs.ru>, <reshma.pattan@intel.com>
Cc: <stable@dpdk.org>, <yisen.zhuang@huawei.com>,
<liudongdong3@huawei.com>, Jie Hai <haijie1@huawei.com>,
Maryam Tahhan <maryam.tahhan@intel.com>
Subject: [PATCH 4/5] app/proc-info: show RSS types with strings
Date: Wed, 15 Mar 2023 19:00:32 +0800 [thread overview]
Message-ID: <20230315110033.30143-5-liudongdong3@huawei.com> (raw)
In-Reply-To: <20230315110033.30143-1-liudongdong3@huawei.com>
From: Jie Hai <haijie1@huawei.com>
show RSS types details and adjust RSS info display format as following:
- RSS info
-- hf:
ipv4 ipv4-frag ipv4-other ipv6 ipv6-frag ipv6-other
-- key len: 40
-- key (hex): 6d5a56da255b0ec24167253d43a38fb0d0ca2bcbae7b30b477cb2da38030f20c6a42b73bbeac01fa
Signed-off-by: Jie Hai <haijie1@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
---
app/proc-info/main.c | 120 ++++++++++++++++++++++++++++++++++++++++---
1 file changed, 113 insertions(+), 7 deletions(-)
diff --git a/app/proc-info/main.c b/app/proc-info/main.c
index 878ce37e8b..7b6f8f1228 100644
--- a/app/proc-info/main.c
+++ b/app/proc-info/main.c
@@ -54,6 +54,9 @@
#define STATS_BDR_STR(w, s) printf("%.*s%s%.*s\n", w, \
STATS_BDR_FMT, s, w, STATS_BDR_FMT)
+/* It is used to print the RSS types. */
+#define RSS_TYPES_CHAR_NUM_PER_LINE 64
+
/* mask of enabled ports */
static unsigned long enabled_port_mask;
/* Enable stats. */
@@ -132,6 +135,76 @@ struct desc_param {
static struct desc_param rx_desc_param;
static struct desc_param tx_desc_param;
+/* Information for a given RSS type. */
+struct rss_type_info {
+ const char *str; /* Type name. */
+ uint64_t rss_type; /* Type value. */
+};
+
+static const struct rss_type_info rss_type_table[] = {
+ /* Group types */
+ { "all", RTE_ETH_RSS_ETH | RTE_ETH_RSS_VLAN | RTE_ETH_RSS_IP | RTE_ETH_RSS_TCP |
+ RTE_ETH_RSS_UDP | RTE_ETH_RSS_SCTP | RTE_ETH_RSS_L2_PAYLOAD |
+ RTE_ETH_RSS_L2TPV3 | RTE_ETH_RSS_ESP | RTE_ETH_RSS_AH | RTE_ETH_RSS_PFCP |
+ RTE_ETH_RSS_GTPU | RTE_ETH_RSS_ECPRI | RTE_ETH_RSS_MPLS | RTE_ETH_RSS_L2TPV2},
+ { "none", 0 },
+ { "ip", RTE_ETH_RSS_IP },
+ { "udp", RTE_ETH_RSS_UDP },
+ { "tcp", RTE_ETH_RSS_TCP },
+ { "sctp", RTE_ETH_RSS_SCTP },
+ { "tunnel", RTE_ETH_RSS_TUNNEL },
+ { "vlan", RTE_ETH_RSS_VLAN },
+
+ /* Individual type */
+ { "ipv4", RTE_ETH_RSS_IPV4 },
+ { "ipv4-frag", RTE_ETH_RSS_FRAG_IPV4 },
+ { "ipv4-tcp", RTE_ETH_RSS_NONFRAG_IPV4_TCP },
+ { "ipv4-udp", RTE_ETH_RSS_NONFRAG_IPV4_UDP },
+ { "ipv4-sctp", RTE_ETH_RSS_NONFRAG_IPV4_SCTP },
+ { "ipv4-other", RTE_ETH_RSS_NONFRAG_IPV4_OTHER },
+ { "ipv6", RTE_ETH_RSS_IPV6 },
+ { "ipv6-frag", RTE_ETH_RSS_FRAG_IPV6 },
+ { "ipv6-tcp", RTE_ETH_RSS_NONFRAG_IPV6_TCP },
+ { "ipv6-udp", RTE_ETH_RSS_NONFRAG_IPV6_UDP },
+ { "ipv6-sctp", RTE_ETH_RSS_NONFRAG_IPV6_SCTP },
+ { "ipv6-other", RTE_ETH_RSS_NONFRAG_IPV6_OTHER },
+ { "l2-payload", RTE_ETH_RSS_L2_PAYLOAD },
+ { "ipv6-ex", RTE_ETH_RSS_IPV6_EX },
+ { "ipv6-tcp-ex", RTE_ETH_RSS_IPV6_TCP_EX },
+ { "ipv6-udp-ex", RTE_ETH_RSS_IPV6_UDP_EX },
+ { "port", RTE_ETH_RSS_PORT },
+ { "vxlan", RTE_ETH_RSS_VXLAN },
+ { "geneve", RTE_ETH_RSS_GENEVE },
+ { "nvgre", RTE_ETH_RSS_NVGRE },
+ { "gtpu", RTE_ETH_RSS_GTPU },
+ { "eth", RTE_ETH_RSS_ETH },
+ { "s-vlan", RTE_ETH_RSS_S_VLAN },
+ { "c-vlan", RTE_ETH_RSS_C_VLAN },
+ { "esp", RTE_ETH_RSS_ESP },
+ { "ah", RTE_ETH_RSS_AH },
+ { "l2tpv3", RTE_ETH_RSS_L2TPV3 },
+ { "pfcp", RTE_ETH_RSS_PFCP },
+ { "pppoe", RTE_ETH_RSS_PPPOE },
+ { "ecpri", RTE_ETH_RSS_ECPRI },
+ { "mpls", RTE_ETH_RSS_MPLS },
+ { "ipv4-chksum", RTE_ETH_RSS_IPV4_CHKSUM },
+ { "l4-chksum", RTE_ETH_RSS_L4_CHKSUM },
+ { "l2tpv2", RTE_ETH_RSS_L2TPV2 },
+ { "l3-pre96", RTE_ETH_RSS_L3_PRE96 },
+ { "l3-pre64", RTE_ETH_RSS_L3_PRE64 },
+ { "l3-pre56", RTE_ETH_RSS_L3_PRE56 },
+ { "l3-pre48", RTE_ETH_RSS_L3_PRE48 },
+ { "l3-pre40", RTE_ETH_RSS_L3_PRE40 },
+ { "l3-pre32", RTE_ETH_RSS_L3_PRE32 },
+ { "l2-dst-only", RTE_ETH_RSS_L2_DST_ONLY },
+ { "l2-src-only", RTE_ETH_RSS_L2_SRC_ONLY },
+ { "l4-dst-only", RTE_ETH_RSS_L4_DST_ONLY },
+ { "l4-src-only", RTE_ETH_RSS_L4_SRC_ONLY },
+ { "l3-dst-only", RTE_ETH_RSS_L3_DST_ONLY },
+ { "l3-src-only", RTE_ETH_RSS_L3_SRC_ONLY },
+ { NULL, 0},
+};
+
/* display usage */
static void
proc_info_usage(const char *prgname)
@@ -806,6 +879,33 @@ show_offloads(uint64_t offloads,
}
}
+static void
+show_rss_types(uint64_t rss_types)
+{
+ uint16_t total_len = 0;
+ uint16_t str_len;
+ uint16_t i;
+
+ printf("\t\t");
+ for (i = 0; rss_type_table[i].str != NULL; i++) {
+ if (rss_type_table[i].rss_type == 0)
+ continue;
+
+ if ((rss_type_table[i].rss_type & rss_types) ==
+ rss_type_table[i].rss_type) {
+ /* Contain two spaces */
+ str_len = strlen(rss_type_table[i].str) + 2;
+ if (total_len + str_len > RSS_TYPES_CHAR_NUM_PER_LINE) {
+ printf("\n\t\t");
+ total_len = 0;
+ }
+ printf("%s ", rss_type_table[i].str);
+ total_len += str_len;
+ }
+ }
+ printf("\n");
+}
+
static void
show_port(void)
{
@@ -991,13 +1091,19 @@ show_port(void)
rss_conf.rss_key_len = dev_info.hash_key_size;
ret = rte_eth_dev_rss_hash_conf_get(i, &rss_conf);
if (ret == 0) {
- printf(" - RSS\n");
- printf("\t -- RSS len %u key (hex):",
- rss_conf.rss_key_len);
- for (k = 0; k < rss_conf.rss_key_len; k++)
- printf(" %x", rss_conf.rss_key[k]);
- printf("\t -- hf 0x%"PRIx64"\n",
- rss_conf.rss_hf);
+ printf(" - RSS info\n");
+ if (rss_conf.rss_hf == 0) {
+ printf("\tRSS disabled\n");
+ } else {
+ printf("\t -- hf:\n");
+ show_rss_types(rss_conf.rss_hf);
+ printf("\t -- key len: %u\n",
+ rss_conf.rss_key_len);
+ printf("\t -- key (hex): ");
+ for (k = 0; k < rss_conf.rss_key_len; k++)
+ printf("%02x", rss_conf.rss_key[k]);
+ printf("\n");
+ }
}
rte_free(rss_key);
--
2.22.0
next prev parent reply other threads:[~2023-03-15 11:02 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-15 11:00 [PATCH 0/5] support setting and querying RSS algorithms Dongdong Liu
2023-03-15 11:00 ` [PATCH 1/5] ethdev: support setting and querying rss algorithm Dongdong Liu
2023-03-15 11:28 ` Ivan Malov
2023-03-16 13:10 ` Dongdong Liu
2023-03-16 14:31 ` Ivan Malov
2023-03-15 13:43 ` Thomas Monjalon
2023-03-16 13:16 ` Dongdong Liu
2023-06-02 20:19 ` Ferruh Yigit
2023-06-05 12:34 ` Dongdong Liu
2023-03-15 11:00 ` [PATCH 2/5] net/hns3: support setting and querying RSS hash function Dongdong Liu
2023-03-15 11:00 ` [PATCH 3/5] app/proc-info: fix never show RSS info Dongdong Liu
2023-06-02 20:19 ` Ferruh Yigit
2023-06-05 13:04 ` Dongdong Liu
2023-06-02 21:19 ` Stephen Hemminger
2023-06-05 13:07 ` Dongdong Liu
2023-03-15 11:00 ` Dongdong Liu [this message]
2023-06-02 20:22 ` [PATCH 4/5] app/proc-info: show RSS types with strings Ferruh Yigit
2023-06-05 13:12 ` Dongdong Liu
2023-03-15 11:00 ` [PATCH 5/5] app/proc-info: support querying RSS hash algorithm Dongdong Liu
2023-08-26 7:00 ` [PATCH v2 0/5] support setting and querying RSS algorithms Jie Hai
2023-08-26 7:00 ` [PATCH v2 1/5] ethdev: support setting and querying rss algorithm Jie Hai
2023-08-30 11:41 ` Thomas Monjalon
2023-08-26 7:00 ` [PATCH v2 2/5] net/hns3: support setting and querying RSS hash function Jie Hai
2023-08-26 7:00 ` [PATCH v2 3/5] app/proc-info: fix never show RSS info Jie Hai
2023-08-26 7:00 ` [PATCH v2 4/5] app/proc-info: adjust the display format of " Jie Hai
2023-08-26 7:00 ` [PATCH v2 5/5] app/proc-info: support querying RSS hash algorithm Jie Hai
2023-08-26 8:52 ` [PATCH v2 0/5] support setting and querying RSS algorithms Jie Hai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230315110033.30143-5-liudongdong3@huawei.com \
--to=liudongdong3@huawei.com \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@amd.com \
--cc=haijie1@huawei.com \
--cc=maryam.tahhan@intel.com \
--cc=reshma.pattan@intel.com \
--cc=stable@dpdk.org \
--cc=thomas@monjalon.net \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).