patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Dongdong Liu <liudongdong3@huawei.com>
To: <dev@dpdk.org>, <ferruh.yigit@amd.com>, <thomas@monjalon.net>,
	<andrew.rybchenko@oktetlabs.ru>
Cc: <stable@dpdk.org>, <liudongdong3@huawei.com>,
	<haijie1@huawei.com>, Yisen Zhuang <yisen.zhuang@huawei.com>
Subject: [PATCH 6/7] net/hns3: add LLRS FEC mode support for 200G ports
Date: Sat, 8 Apr 2023 10:27:38 +0800	[thread overview]
Message-ID: <20230408022740.14522-7-liudongdong3@huawei.com> (raw)
In-Reply-To: <20230408022740.14522-1-liudongdong3@huawei.com>

From: Jie Hai <haijie1@huawei.com>

This patch supports the query and configuration of LLRS FEC mode.

Signed-off-by: Jie Hai <haijie1@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
---
 drivers/net/hns3/hns3_cmd.c    |  1 +
 drivers/net/hns3/hns3_cmd.h    |  2 ++
 drivers/net/hns3/hns3_ethdev.c | 21 ++++++++++++---------
 3 files changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/net/hns3/hns3_cmd.c b/drivers/net/hns3/hns3_cmd.c
index bdfc85f934..a574191ba9 100644
--- a/drivers/net/hns3/hns3_cmd.c
+++ b/drivers/net/hns3/hns3_cmd.c
@@ -637,6 +637,7 @@ hns3_firmware_compat_config(struct hns3_hw *hw, bool is_init)
 	if (is_init) {
 		hns3_set_bit(compat, HNS3_LINK_EVENT_REPORT_EN_B, 1);
 		hns3_set_bit(compat, HNS3_NCSI_ERROR_REPORT_EN_B, 0);
+		hns3_set_bit(compat, HNS3_LLRS_FEC_EN_B, 1);
 		if (hns3_dev_get_support(hw, COPPER))
 			hns3_set_bit(compat, HNS3_FIRMWARE_PHY_DRIVER_EN_B, 1);
 	}
diff --git a/drivers/net/hns3/hns3_cmd.h b/drivers/net/hns3/hns3_cmd.h
index eb394c9dec..a86f5116e4 100644
--- a/drivers/net/hns3/hns3_cmd.h
+++ b/drivers/net/hns3/hns3_cmd.h
@@ -665,6 +665,7 @@ enum hns3_promisc_type {
 #define HNS3_LINK_EVENT_REPORT_EN_B	0
 #define HNS3_NCSI_ERROR_REPORT_EN_B	1
 #define HNS3_FIRMWARE_PHY_DRIVER_EN_B	2
+#define HNS3_LLRS_FEC_EN_B		5
 struct hns3_firmware_compat_cmd {
 	uint32_t compat;
 	uint8_t rsv[20];
@@ -806,6 +807,7 @@ struct hns3_sfp_info_cmd {
 #define HNS3_MAC_FEC_OFF		0
 #define HNS3_MAC_FEC_BASER		1
 #define HNS3_MAC_FEC_RS			2
+#define HNS3_MAC_FEC_LLRS		3
 
 /* Configure FEC mode, opcode:0x031A */
 struct hns3_config_fec_cmd {
diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index 80cdcc83bf..8f998947c6 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -47,11 +47,6 @@
 #define HNS3_RESET_WAIT_MS	100
 #define HNS3_RESET_WAIT_CNT	200
 
-/* FEC mode order defined in HNS3 hardware */
-#define HNS3_HW_FEC_MODE_NOFEC  0
-#define HNS3_HW_FEC_MODE_BASER  1
-#define HNS3_HW_FEC_MODE_RS     2
-
 enum hns3_evt_cause {
 	HNS3_VECTOR0_EVENT_RST,
 	HNS3_VECTOR0_EVENT_MBX,
@@ -91,7 +86,8 @@ static const struct rte_eth_fec_capa speed_fec_capa_tbl[] = {
 			      RTE_ETH_FEC_MODE_CAPA_MASK(RS) },
 
 	{ RTE_ETH_SPEED_NUM_200G, RTE_ETH_FEC_MODE_CAPA_MASK(AUTO) |
-			      RTE_ETH_FEC_MODE_CAPA_MASK(RS) }
+			      RTE_ETH_FEC_MODE_CAPA_MASK(RS) |
+			      RTE_ETH_FEC_MODE_CAPA_MASK(LLRS) }
 };
 
 static enum hns3_reset_level hns3_get_reset_level(struct hns3_adapter *hns,
@@ -6059,15 +6055,18 @@ hns3_fec_get_internal(struct hns3_hw *hw, uint32_t *fec_capa)
 	 * to be converted.
 	 */
 	switch (resp->active_fec) {
-	case HNS3_HW_FEC_MODE_NOFEC:
+	case HNS3_MAC_FEC_OFF:
 		tmp_fec_capa = RTE_ETH_FEC_MODE_CAPA_MASK(NOFEC);
 		break;
-	case HNS3_HW_FEC_MODE_BASER:
+	case HNS3_MAC_FEC_BASER:
 		tmp_fec_capa = RTE_ETH_FEC_MODE_CAPA_MASK(BASER);
 		break;
-	case HNS3_HW_FEC_MODE_RS:
+	case HNS3_MAC_FEC_RS:
 		tmp_fec_capa = RTE_ETH_FEC_MODE_CAPA_MASK(RS);
 		break;
+	case HNS3_MAC_FEC_LLRS:
+		tmp_fec_capa = RTE_ETH_FEC_MODE_CAPA_MASK(LLRS);
+		break;
 	default:
 		tmp_fec_capa = RTE_ETH_FEC_MODE_CAPA_MASK(NOFEC);
 		break;
@@ -6108,6 +6107,10 @@ hns3_set_fec_hw(struct hns3_hw *hw, uint32_t mode)
 		hns3_set_field(req->fec_mode, HNS3_MAC_CFG_FEC_MODE_M,
 				HNS3_MAC_CFG_FEC_MODE_S, HNS3_MAC_FEC_RS);
 		break;
+	case RTE_ETH_FEC_MODE_CAPA_MASK(LLRS):
+		hns3_set_field(req->fec_mode, HNS3_MAC_CFG_FEC_MODE_M,
+				HNS3_MAC_CFG_FEC_MODE_S, HNS3_MAC_FEC_LLRS);
+		break;
 	case RTE_ETH_FEC_MODE_CAPA_MASK(AUTO):
 		hns3_set_bit(req->fec_mode, HNS3_MAC_CFG_FEC_AUTO_EN_B, 1);
 		break;
-- 
2.22.0


  parent reply	other threads:[~2023-04-08  2:29 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-08  2:27 [PATCH 0/7] add setting and querying of LLRS FEC mode Dongdong Liu
2023-04-08  2:27 ` [PATCH 1/7] net/hns3: fix fec mode for 200G ports Dongdong Liu
2023-04-08  2:27 ` [PATCH 2/7] net/hns3: fix fec mode check error Dongdong Liu
2023-04-08  2:27 ` [PATCH 3/7] net/hns3: fix missing FEC capability Dongdong Liu
2023-04-08  2:27 ` [PATCH 4/7] ethdev: introduce low latency RS FEC Dongdong Liu
2023-06-01  8:30   ` Ferruh Yigit
2023-04-08  2:27 ` [PATCH 5/7] app/testpmd: add setting and querying of LLRS FEC mode Dongdong Liu
2023-04-28  6:50   ` Singh, Aman Deep
2023-04-08  2:27 ` Dongdong Liu [this message]
2023-04-08  2:27 ` [PATCH 7/7] net/hns3: support getting current FEC capability from firmware Dongdong Liu
2023-06-01  8:30 ` [PATCH 0/7] add setting and querying of LLRS FEC mode Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230408022740.14522-7-liudongdong3@huawei.com \
    --to=liudongdong3@huawei.com \
    --cc=andrew.rybchenko@oktetlabs.ru \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@amd.com \
    --cc=haijie1@huawei.com \
    --cc=stable@dpdk.org \
    --cc=thomas@monjalon.net \
    --cc=yisen.zhuang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).