patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Bruce Richardson <bruce.richardson@intel.com>
To: dev@dpdk.org
Cc: Dave Ertman <david.m.ertman@intel.com>,
	stable@dpdk.org, Jacob Keller <jacob.e.keller@intel.com>,
	Bruce Richardson <bruce.richardson@intel.com>
Subject: [PATCH 3/9] net/ice/base: fix VLAN replay after reset
Date: Fri, 11 Oct 2024 17:44:53 +0100	[thread overview]
Message-ID: <20241011164459.1987538-4-bruce.richardson@intel.com> (raw)
In-Reply-To: <20241011164459.1987538-1-bruce.richardson@intel.com>

From: Dave Ertman <david.m.ertman@intel.com>

If there is more than one VLAN defined when any reset that affects the
PF is initiated, after the reset rebuild, no traffic will pass on any
VLAN but the last one created.

This is caused by the iteration though the VLANs during replay each
clearing the vsi_map bitmap of the VSI that is being replayed.  The
problem is that during the replay, the pointer to the vsi_map bitmap is
used by each successive vlan to determine if it should be replayed on
this VSI.

The logic was that the replay of the VLAN would replace the bit in the
map before the next VLAN would iterate through.  But, since the replay
copies the old bitmap pointer to filt_replay_rules and creates a new one
for the recreated VLANS, it does not do this, and leaves the old bitmap
broken to be used to replay the remaining VLANs.

Since the old bitmap will be cleaned up in post replay cleanup, there is
no need to alter it and break following VLAN replay, so don't clear the
bit.

Fixes: c7dd15931183 ("net/ice/base: add virtual switch code")
Cc: stable@dpdk.org

Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
 drivers/net/ice/base/ice_switch.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/ice/base/ice_switch.c b/drivers/net/ice/base/ice_switch.c
index 96ef26d535..a3786961e6 100644
--- a/drivers/net/ice/base/ice_switch.c
+++ b/drivers/net/ice/base/ice_switch.c
@@ -10110,8 +10110,6 @@ ice_replay_vsi_fltr(struct ice_hw *hw, struct ice_port_info *pi,
 		if (!itr->vsi_list_info ||
 		    !ice_is_bit_set(itr->vsi_list_info->vsi_map, vsi_handle))
 			continue;
-		/* Clearing it so that the logic can add it back */
-		ice_clear_bit(vsi_handle, itr->vsi_list_info->vsi_map);
 		f_entry.fltr_info.vsi_handle = vsi_handle;
 		f_entry.fltr_info.fltr_act = ICE_FWD_TO_VSI;
 		/* update the src in case it is VSI num */
--
2.43.0


  parent reply	other threads:[~2024-10-11 16:45 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20241011164459.1987538-1-bruce.richardson@intel.com>
2024-10-11 16:44 ` [PATCH 1/9] net/ice/base: re-enable bypass mode for E822 Bruce Richardson
2024-10-11 16:44 ` [PATCH 2/9] net/ice/base: add bounds check Bruce Richardson
2024-10-11 16:44 ` Bruce Richardson [this message]
     [not found] ` <20241014110250.2314727-1-bruce.richardson@intel.com>
2024-10-14 11:02   ` [PATCH v2 01/10] net/ice/base: re-enable bypass mode for E822 Bruce Richardson
2024-10-14 11:02   ` [PATCH v2 02/10] net/ice/base: add bounds check Bruce Richardson
2024-10-14 11:02   ` [PATCH v2 03/10] net/ice/base: fix VLAN replay after reset Bruce Richardson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241011164459.1987538-4-bruce.richardson@intel.com \
    --to=bruce.richardson@intel.com \
    --cc=david.m.ertman@intel.com \
    --cc=dev@dpdk.org \
    --cc=jacob.e.keller@intel.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).