* [PATCH] examples/l3fwd: fix Rx over not ready port
@ 2024-03-01 16:39 Konstantin Ananyev
2024-03-01 16:49 ` [EXTERNAL] " Pavan Nikhilesh Bhagavatula
0 siblings, 1 reply; 6+ messages in thread
From: Konstantin Ananyev @ 2024-03-01 16:39 UTC (permalink / raw)
To: dev; +Cc: jerinj, pbhagavatula, Konstantin Ananyev, stable
From: Konstantin Ananyev <konstantin.ananyev@huawei.com>
Running l3fwd in event mode with SW eventdev, service cores
can start RX before main thread is finished with PMD installation.
to reproduce:
./dpdk-l3fwd --lcores=49,51 -n 6 -a ca:00.0 -s 0x8000000000000 \
--vdev event_sw0 -- \
-L -P -p 1 --mode eventdev --eventq-sched=ordered \
--rule_ipv4=test/l3fwd_lpm_v4_u1.cfg --rule_ipv6=test/l3fwd_lpm_v6_u1.cfg \
--no-numa
At init stage user will most likely see the error message like that:
ETHDEV: lcore 51 called rx_pkt_burst for not ready port 0
0: ./dpdk-l3fwd (rte_dump_stack+0x1f) [15de723]
...
9: ./dpdk-l3fwd (eal_thread_loop+0x5a2) [15c1324]
...
And then all depends how luck/unlucky you are.
If there are some actual packet in HW RX queue, then the app will most
likely crash, otherwise it might survive.
As error message suggests, the problem is that services are started
before main thread finished with NIC setup and initialization.
The suggested fix moves services startup after NIC setup phase.
Bugzilla ID: 1390
Fixes: 8bd537e9c6cf ("examples/l3fwd: add service core setup based on caps")
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
---
examples/l3fwd/main.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
index 3bf28aec0c..d4fb5d1971 100644
--- a/examples/l3fwd/main.c
+++ b/examples/l3fwd/main.c
@@ -1577,7 +1577,6 @@ main(int argc, char **argv)
l3fwd_lkp.main_loop = evt_rsrc->ops.fib_event_loop;
else
l3fwd_lkp.main_loop = evt_rsrc->ops.lpm_event_loop;
- l3fwd_event_service_setup();
} else
#endif
l3fwd_poll_resource_setup();
@@ -1609,6 +1608,11 @@ main(int argc, char **argv)
}
}
+#ifdef RTE_LIB_EVENTDEV
+ if (evt_rsrc->enabled)
+ l3fwd_event_service_setup();
+#endif
+
printf("\n");
for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
--
2.35.3
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [EXTERNAL] [PATCH] examples/l3fwd: fix Rx over not ready port
2024-03-01 16:39 [PATCH] examples/l3fwd: fix Rx over not ready port Konstantin Ananyev
@ 2024-03-01 16:49 ` Pavan Nikhilesh Bhagavatula
2024-03-01 17:12 ` Konstantin Ananyev
0 siblings, 1 reply; 6+ messages in thread
From: Pavan Nikhilesh Bhagavatula @ 2024-03-01 16:49 UTC (permalink / raw)
To: Konstantin Ananyev, dev; +Cc: Jerin Jacob, Konstantin Ananyev, stable
> -----Original Message-----
> From: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
> Sent: Friday, March 1, 2024 10:10 PM
> To: dev@dpdk.org
> Cc: Jerin Jacob <jerinj@marvell.com>; Pavan Nikhilesh Bhagavatula
> <pbhagavatula@marvell.com>; Konstantin Ananyev
> <konstantin.ananyev@huawei.com>; stable@dpdk.org
> Subject: [EXTERNAL] [PATCH] examples/l3fwd: fix Rx over not ready port
>
> Prioritize security for external emails: Confirm sender and content safety
> before clicking links or opening attachments
>
> ----------------------------------------------------------------------
> From: Konstantin Ananyev <konstantin.ananyev@huawei.com>
>
> Running l3fwd in event mode with SW eventdev, service cores
> can start RX before main thread is finished with PMD installation.
> to reproduce:
> ./dpdk-l3fwd --lcores=49,51 -n 6 -a ca:00.0 -s 0x8000000000000 \
> --vdev event_sw0 -- \
> -L -P -p 1 --mode eventdev --eventq-sched=ordered \
> --rule_ipv4=test/l3fwd_lpm_v4_u1.cfg --rule_ipv6=test/l3fwd_lpm_v6_u1.cfg
> \
> --no-numa
>
> At init stage user will most likely see the error message like that:
> ETHDEV: lcore 51 called rx_pkt_burst for not ready port 0
> 0: ./dpdk-l3fwd (rte_dump_stack+0x1f) [15de723]
> ...
> 9: ./dpdk-l3fwd (eal_thread_loop+0x5a2) [15c1324]
> ...
>
> And then all depends how luck/unlucky you are.
> If there are some actual packet in HW RX queue, then the app will most
> likely crash, otherwise it might survive.
> As error message suggests, the problem is that services are started
> before main thread finished with NIC setup and initialization.
> The suggested fix moves services startup after NIC setup phase.
>
> Bugzilla ID: 1390
> Fixes: 8bd537e9c6cf ("examples/l3fwd: add service core setup based on
> caps")
> Cc: stable@dpdk.org
>
> Signed-off-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
> Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
> ---
> examples/l3fwd/main.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
> index 3bf28aec0c..d4fb5d1971 100644
> --- a/examples/l3fwd/main.c
> +++ b/examples/l3fwd/main.c
> @@ -1577,7 +1577,6 @@ main(int argc, char **argv)
> l3fwd_lkp.main_loop = evt_rsrc->ops.fib_event_loop;
> else
> l3fwd_lkp.main_loop = evt_rsrc-
> >ops.lpm_event_loop;
> - l3fwd_event_service_setup();
> } else
> #endif
> l3fwd_poll_resource_setup();
> @@ -1609,6 +1608,11 @@ main(int argc, char **argv)
> }
> }
>
> +#ifdef RTE_LIB_EVENTDEV
Is the ifdef required?
> + if (evt_rsrc->enabled)
> + l3fwd_event_service_setup();
> +#endif
> +
> printf("\n");
>
> for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
> --
> 2.35.3
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [EXTERNAL] [PATCH] examples/l3fwd: fix Rx over not ready port
2024-03-01 16:49 ` [EXTERNAL] " Pavan Nikhilesh Bhagavatula
@ 2024-03-01 17:12 ` Konstantin Ananyev
2024-03-01 17:17 ` Pavan Nikhilesh Bhagavatula
0 siblings, 1 reply; 6+ messages in thread
From: Konstantin Ananyev @ 2024-03-01 17:12 UTC (permalink / raw)
To: Pavan Nikhilesh Bhagavatula, Konstantin Ananyev, dev; +Cc: Jerin Jacob, stable
> > From: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
> > Sent: Friday, March 1, 2024 10:10 PM
> > To: dev@dpdk.org
> > Cc: Jerin Jacob <jerinj@marvell.com>; Pavan Nikhilesh Bhagavatula
> > <pbhagavatula@marvell.com>; Konstantin Ananyev
> > <konstantin.ananyev@huawei.com>; stable@dpdk.org
> > Subject: [EXTERNAL] [PATCH] examples/l3fwd: fix Rx over not ready port
> >
> > Prioritize security for external emails: Confirm sender and content safety
> > before clicking links or opening attachments
> >
> > ----------------------------------------------------------------------
> > From: Konstantin Ananyev <konstantin.ananyev@huawei.com>
> >
> > Running l3fwd in event mode with SW eventdev, service cores
> > can start RX before main thread is finished with PMD installation.
> > to reproduce:
> > ./dpdk-l3fwd --lcores=49,51 -n 6 -a ca:00.0 -s 0x8000000000000 \
> > --vdev event_sw0 -- \
> > -L -P -p 1 --mode eventdev --eventq-sched=ordered \
> > --rule_ipv4=test/l3fwd_lpm_v4_u1.cfg --rule_ipv6=test/l3fwd_lpm_v6_u1.cfg
> > \
> > --no-numa
> >
> > At init stage user will most likely see the error message like that:
> > ETHDEV: lcore 51 called rx_pkt_burst for not ready port 0
> > 0: ./dpdk-l3fwd (rte_dump_stack+0x1f) [15de723]
> > ...
> > 9: ./dpdk-l3fwd (eal_thread_loop+0x5a2) [15c1324]
> > ...
> >
> > And then all depends how luck/unlucky you are.
> > If there are some actual packet in HW RX queue, then the app will most
> > likely crash, otherwise it might survive.
> > As error message suggests, the problem is that services are started
> > before main thread finished with NIC setup and initialization.
> > The suggested fix moves services startup after NIC setup phase.
> >
> > Bugzilla ID: 1390
> > Fixes: 8bd537e9c6cf ("examples/l3fwd: add service core setup based on
> > caps")
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
> > Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
> > ---
> > examples/l3fwd/main.c | 6 +++++-
> > 1 file changed, 5 insertions(+), 1 deletion(-)
> >
> > diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
> > index 3bf28aec0c..d4fb5d1971 100644
> > --- a/examples/l3fwd/main.c
> > +++ b/examples/l3fwd/main.c
> > @@ -1577,7 +1577,6 @@ main(int argc, char **argv)
> > l3fwd_lkp.main_loop = evt_rsrc->ops.fib_event_loop;
> > else
> > l3fwd_lkp.main_loop = evt_rsrc-
> > >ops.lpm_event_loop;
> > - l3fwd_event_service_setup();
> > } else
> > #endif
> > l3fwd_poll_resource_setup();
> > @@ -1609,6 +1608,11 @@ main(int argc, char **argv)
> > }
> > }
> >
> > +#ifdef RTE_LIB_EVENTDEV
>
> Is the ifdef required?
Well, right now l3fwd_event_service_setup() is defined only when
RTE_LIB_EVENTDEV is defined, see examples/l3fwd/main.c.
So, I suppose, yes.
>
> > + if (evt_rsrc->enabled)
> > + l3fwd_event_service_setup();
> > +#endif
> > +
> > printf("\n");
> >
> > for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
> > --
> > 2.35.3
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [EXTERNAL] [PATCH] examples/l3fwd: fix Rx over not ready port
2024-03-01 17:12 ` Konstantin Ananyev
@ 2024-03-01 17:17 ` Pavan Nikhilesh Bhagavatula
2024-03-04 10:13 ` Konstantin Ananyev
2024-03-07 8:43 ` Thomas Monjalon
0 siblings, 2 replies; 6+ messages in thread
From: Pavan Nikhilesh Bhagavatula @ 2024-03-01 17:17 UTC (permalink / raw)
To: Konstantin Ananyev, Konstantin Ananyev, dev; +Cc: Jerin Jacob, stable
> -----Original Message-----
> From: Konstantin Ananyev <konstantin.ananyev@huawei.com>
> Sent: Friday, March 1, 2024 10:43 PM
> To: Pavan Nikhilesh Bhagavatula <pbhagavatula@marvell.com>; Konstantin
> Ananyev <konstantin.v.ananyev@yandex.ru>; dev@dpdk.org
> Cc: Jerin Jacob <jerinj@marvell.com>; stable@dpdk.org
> Subject: RE: [EXTERNAL] [PATCH] examples/l3fwd: fix Rx over not ready port
>
>
>
> > > From: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
> > > Sent: Friday, March 1, 2024 10:10 PM
> > > To: dev@dpdk.org
> > > Cc: Jerin Jacob <jerinj@marvell.com>; Pavan Nikhilesh Bhagavatula
> > > <pbhagavatula@marvell.com>; Konstantin Ananyev
> > > <konstantin.ananyev@huawei.com>; stable@dpdk.org
> > > Subject: [EXTERNAL] [PATCH] examples/l3fwd: fix Rx over not ready port
> > >
> > > Prioritize security for external emails: Confirm sender and content safety
> > > before clicking links or opening attachments
> > >
> > > ----------------------------------------------------------------------
> > > From: Konstantin Ananyev <konstantin.ananyev@huawei.com>
> > >
> > > Running l3fwd in event mode with SW eventdev, service cores
> > > can start RX before main thread is finished with PMD installation.
> > > to reproduce:
> > > ./dpdk-l3fwd --lcores=49,51 -n 6 -a ca:00.0 -s 0x8000000000000 \
> > > --vdev event_sw0 -- \
> > > -L -P -p 1 --mode eventdev --eventq-sched=ordered \
> > > --rule_ipv4=test/l3fwd_lpm_v4_u1.cfg --
> rule_ipv6=test/l3fwd_lpm_v6_u1.cfg
> > > \
> > > --no-numa
> > >
> > > At init stage user will most likely see the error message like that:
> > > ETHDEV: lcore 51 called rx_pkt_burst for not ready port 0
> > > 0: ./dpdk-l3fwd (rte_dump_stack+0x1f) [15de723]
> > > ...
> > > 9: ./dpdk-l3fwd (eal_thread_loop+0x5a2) [15c1324]
> > > ...
> > >
> > > And then all depends how luck/unlucky you are.
> > > If there are some actual packet in HW RX queue, then the app will most
> > > likely crash, otherwise it might survive.
> > > As error message suggests, the problem is that services are started
> > > before main thread finished with NIC setup and initialization.
> > > The suggested fix moves services startup after NIC setup phase.
> > >
> > > Bugzilla ID: 1390
> > > Fixes: 8bd537e9c6cf ("examples/l3fwd: add service core setup based on
> > > caps")
> > > Cc: stable@dpdk.org
> > >
> > > Signed-off-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
> > > Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
> > > ---
> > > examples/l3fwd/main.c | 6 +++++-
> > > 1 file changed, 5 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
> > > index 3bf28aec0c..d4fb5d1971 100644
> > > --- a/examples/l3fwd/main.c
> > > +++ b/examples/l3fwd/main.c
> > > @@ -1577,7 +1577,6 @@ main(int argc, char **argv)
> > > l3fwd_lkp.main_loop = evt_rsrc->ops.fib_event_loop;
> > > else
> > > l3fwd_lkp.main_loop = evt_rsrc-
> > > >ops.lpm_event_loop;
> > > - l3fwd_event_service_setup();
> > > } else
> > > #endif
> > > l3fwd_poll_resource_setup();
> > > @@ -1609,6 +1608,11 @@ main(int argc, char **argv)
> > > }
> > > }
> > >
> > > +#ifdef RTE_LIB_EVENTDEV
> >
> > Is the ifdef required?
>
> Well, right now l3fwd_event_service_setup() is defined only when
> RTE_LIB_EVENTDEV is defined, see examples/l3fwd/main.c.
> So, I suppose, yes.
>
My bad I was looking at wrong DPDK version (22.11).
> >
> > > + if (evt_rsrc->enabled)
> > > + l3fwd_event_service_setup();
> > > +#endif
> > > +
> > > printf("\n");
> > >
> > > for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
> > > --
> > > 2.35.3
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [EXTERNAL] [PATCH] examples/l3fwd: fix Rx over not ready port
2024-03-01 17:17 ` Pavan Nikhilesh Bhagavatula
@ 2024-03-04 10:13 ` Konstantin Ananyev
2024-03-07 8:43 ` Thomas Monjalon
1 sibling, 0 replies; 6+ messages in thread
From: Konstantin Ananyev @ 2024-03-04 10:13 UTC (permalink / raw)
To: Pavan Nikhilesh Bhagavatula, Konstantin Ananyev, dev; +Cc: Jerin Jacob, stable
> > > > From: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
> > > > Sent: Friday, March 1, 2024 10:10 PM
> > > > To: dev@dpdk.org
> > > > Cc: Jerin Jacob <jerinj@marvell.com>; Pavan Nikhilesh Bhagavatula
> > > > <pbhagavatula@marvell.com>; Konstantin Ananyev
> > > > <konstantin.ananyev@huawei.com>; stable@dpdk.org
> > > > Subject: [EXTERNAL] [PATCH] examples/l3fwd: fix Rx over not ready port
> > > >
> > > > Prioritize security for external emails: Confirm sender and content safety
> > > > before clicking links or opening attachments
> > > >
> > > > ----------------------------------------------------------------------
> > > > From: Konstantin Ananyev <konstantin.ananyev@huawei.com>
> > > >
> > > > Running l3fwd in event mode with SW eventdev, service cores
> > > > can start RX before main thread is finished with PMD installation.
> > > > to reproduce:
> > > > ./dpdk-l3fwd --lcores=49,51 -n 6 -a ca:00.0 -s 0x8000000000000 \
> > > > --vdev event_sw0 -- \
> > > > -L -P -p 1 --mode eventdev --eventq-sched=ordered \
> > > > --rule_ipv4=test/l3fwd_lpm_v4_u1.cfg --
> > rule_ipv6=test/l3fwd_lpm_v6_u1.cfg
> > > > \
> > > > --no-numa
> > > >
> > > > At init stage user will most likely see the error message like that:
> > > > ETHDEV: lcore 51 called rx_pkt_burst for not ready port 0
> > > > 0: ./dpdk-l3fwd (rte_dump_stack+0x1f) [15de723]
> > > > ...
> > > > 9: ./dpdk-l3fwd (eal_thread_loop+0x5a2) [15c1324]
> > > > ...
> > > >
> > > > And then all depends how luck/unlucky you are.
> > > > If there are some actual packet in HW RX queue, then the app will most
> > > > likely crash, otherwise it might survive.
> > > > As error message suggests, the problem is that services are started
> > > > before main thread finished with NIC setup and initialization.
> > > > The suggested fix moves services startup after NIC setup phase.
> > > >
> > > > Bugzilla ID: 1390
> > > > Fixes: 8bd537e9c6cf ("examples/l3fwd: add service core setup based on
> > > > caps")
> > > > Cc: stable@dpdk.org
> > > >
> > > > Signed-off-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
> > > > Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
>
> Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
>
> > > > ---
> > > > examples/l3fwd/main.c | 6 +++++-
> > > > 1 file changed, 5 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
> > > > index 3bf28aec0c..d4fb5d1971 100644
> > > > --- a/examples/l3fwd/main.c
> > > > +++ b/examples/l3fwd/main.c
> > > > @@ -1577,7 +1577,6 @@ main(int argc, char **argv)
> > > > l3fwd_lkp.main_loop = evt_rsrc->ops.fib_event_loop;
> > > > else
> > > > l3fwd_lkp.main_loop = evt_rsrc-
> > > > >ops.lpm_event_loop;
> > > > - l3fwd_event_service_setup();
> > > > } else
> > > > #endif
> > > > l3fwd_poll_resource_setup();
> > > > @@ -1609,6 +1608,11 @@ main(int argc, char **argv)
> > > > }
> > > > }
> > > >
> > > > +#ifdef RTE_LIB_EVENTDEV
> > >
> > > Is the ifdef required?
> >
> > Well, right now l3fwd_event_service_setup() is defined only when
> > RTE_LIB_EVENTDEV is defined, see examples/l3fwd/main.c.
> > So, I suppose, yes.
> >
>
> My bad I was looking at wrong DPDK version (22.11).
NP, thank you for taking a look.
As a FYI, I filled 2 more bugs on a similar subject (l3fwd event mode):
https://bugs.dpdk.org/show_bug.cgi?id=1393
https://bugs.dpdk.org/show_bug.cgi?id=1391
If you have bandwidth to have a look and provide some feedback,
would be great.
>
> > >
> > > > + if (evt_rsrc->enabled)
> > > > + l3fwd_event_service_setup();
> > > > +#endif
> > > > +
> > > > printf("\n");
> > > >
> > > > for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
> > > > --
> > > > 2.35.3
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [EXTERNAL] [PATCH] examples/l3fwd: fix Rx over not ready port
2024-03-01 17:17 ` Pavan Nikhilesh Bhagavatula
2024-03-04 10:13 ` Konstantin Ananyev
@ 2024-03-07 8:43 ` Thomas Monjalon
1 sibling, 0 replies; 6+ messages in thread
From: Thomas Monjalon @ 2024-03-07 8:43 UTC (permalink / raw)
To: Konstantin Ananyev, Konstantin Ananyev
Cc: dev, stable, Jerin Jacob, Pavan Nikhilesh Bhagavatula
> > > > Running l3fwd in event mode with SW eventdev, service cores
> > > > can start RX before main thread is finished with PMD installation.
> > > > to reproduce:
> > > > ./dpdk-l3fwd --lcores=49,51 -n 6 -a ca:00.0 -s 0x8000000000000 \
> > > > --vdev event_sw0 -- \
> > > > -L -P -p 1 --mode eventdev --eventq-sched=ordered \
> > > > --rule_ipv4=test/l3fwd_lpm_v4_u1.cfg --
> > rule_ipv6=test/l3fwd_lpm_v6_u1.cfg
> > > > \
> > > > --no-numa
> > > >
> > > > At init stage user will most likely see the error message like that:
> > > > ETHDEV: lcore 51 called rx_pkt_burst for not ready port 0
> > > > 0: ./dpdk-l3fwd (rte_dump_stack+0x1f) [15de723]
> > > > ...
> > > > 9: ./dpdk-l3fwd (eal_thread_loop+0x5a2) [15c1324]
> > > > ...
> > > >
> > > > And then all depends how luck/unlucky you are.
> > > > If there are some actual packet in HW RX queue, then the app will most
> > > > likely crash, otherwise it might survive.
> > > > As error message suggests, the problem is that services are started
> > > > before main thread finished with NIC setup and initialization.
> > > > The suggested fix moves services startup after NIC setup phase.
> > > >
> > > > Bugzilla ID: 1390
> > > > Fixes: 8bd537e9c6cf ("examples/l3fwd: add service core setup based on
> > > > caps")
> > > > Cc: stable@dpdk.org
> > > >
> > > > Signed-off-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
> > > > Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
>
> Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2024-03-07 8:43 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-03-01 16:39 [PATCH] examples/l3fwd: fix Rx over not ready port Konstantin Ananyev
2024-03-01 16:49 ` [EXTERNAL] " Pavan Nikhilesh Bhagavatula
2024-03-01 17:12 ` Konstantin Ananyev
2024-03-01 17:17 ` Pavan Nikhilesh Bhagavatula
2024-03-04 10:13 ` Konstantin Ananyev
2024-03-07 8:43 ` Thomas Monjalon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).