patches for DPDK stable branches
 help / color / mirror / Atom feed
* [dpdk-stable] [PATCH] net/mlx5: disable ConnectX-4 Lx Multi Packet Send by default
@ 2018-08-13  7:00 Shahaf Shuler
  2018-08-14 16:32 ` Yongseok Koh
  2018-08-15 12:17 ` [dpdk-stable] [PATCH v2] " Shahaf Shuler
  0 siblings, 2 replies; 5+ messages in thread
From: Shahaf Shuler @ 2018-08-13  7:00 UTC (permalink / raw)
  To: yskoh; +Cc: dev, rasland, alialnu, wisamm, olgas, stable

On ConnectX-4 Lx the Multi Packet Send (MPW) feature is considered
un-secure, as on some cases were the application provides incorrect mbufs
on the Tx burst the host or NIC can get stuck.

Hence, disabling the feature by default for this specific NIC.
Users can still enable this feature and enjoy the performance gain
(mostly for low number of cores) by using the txq_mpw_en devarg.

This patch will impact the out of the box performance of some application
using ConnectX-4 Lx for the sack of security and robustness.

Cc: stable@dpdk.org

Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
---
 doc/guides/nics/mlx5.rst       | 7 ++++++-
 drivers/net/mlx5/mlx5.c        | 9 +++++++--
 drivers/net/mlx5/mlx5_ethdev.c | 5 +++--
 drivers/net/mlx5/mlx5_prm.h    | 3 ++-
 4 files changed, 18 insertions(+), 6 deletions(-)

diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index 52e1213cf5..dbdb90b59b 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -339,7 +339,12 @@ Run-time configuration
   When those offloads are requested the MPS send function will not be used.
 
   It is currently only supported on the ConnectX-4 Lx, ConnectX-5 and Bluefield
-  families of adapters. Enabled by default.
+  families of adapters.
+  On ConnectX-4 Lx the MPW is considered un-secure hence disabled by default.
+  Users which enable the MPW should be aware that application which provides incorrect
+  mbuf descriptors in the Tx burst can lead to serious errors in the host including, on some cases,
+  NIC to get stuck.
+  On ConnectX-5 and Bluefield the MPW is secure and enabled by default.
 
 - ``txq_mpw_hdr_dseg_en`` parameter [int]
 
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index ec63bc6e22..2e8f906f35 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -477,7 +477,11 @@ mlx5_args_check(const char *key, const char *val, void *opaque)
 	} else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) {
 		config->txqs_inline = tmp;
 	} else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) {
-		config->mps = !!tmp ? config->mps : 0;
+		tmp = !!tmp;
+		if (tmp && config->mps == MLX5_MPW)
+			config->mps = MLX5_MPW_USER_FORCED;
+		else
+			config->mps = tmp ? config->mps : 0;
 	} else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) {
 		config->mpw_hdr_dseg = !!tmp;
 	} else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) {
@@ -1044,7 +1048,8 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
 	}
 	DRV_LOG(INFO, "%sMPS is %s",
 		config.mps == MLX5_MPW_ENHANCED ? "enhanced " : "",
-		config.mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
+		(config.mps != MLX5_MPW_DISABLED && config.mps != MLX5_MPW) ?
+		"enabled" : "disabled");
 	if (config.cqe_comp && !cqe_comp) {
 		DRV_LOG(WARNING, "Rx CQE compression isn't supported");
 		config.cqe_comp = 0;
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index 34c5b95ee6..48917b0f6b 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -1224,11 +1224,12 @@ mlx5_select_tx_function(struct rte_eth_dev *dev)
 				"port %u selected enhanced MPW Tx function",
 				dev->data->port_id);
 		}
-	} else if (config->mps && (config->txq_inline > 0)) {
+	} else if (config->mps == MLX5_MPW_USER_FORCED &&
+		   (config->txq_inline > 0)) {
 		tx_pkt_burst = mlx5_tx_burst_mpw_inline;
 		DRV_LOG(DEBUG, "port %u selected MPW inline Tx function",
 			dev->data->port_id);
-	} else if (config->mps) {
+	} else if (config->mps == MLX5_MPW_USER_FORCED) {
 		tx_pkt_burst = mlx5_tx_burst_mpw;
 		DRV_LOG(DEBUG, "port %u selected MPW Tx function",
 			dev->data->port_id);
diff --git a/drivers/net/mlx5/mlx5_prm.h b/drivers/net/mlx5/mlx5_prm.h
index 0870d32fdb..b64cd45eee 100644
--- a/drivers/net/mlx5/mlx5_prm.h
+++ b/drivers/net/mlx5/mlx5_prm.h
@@ -197,7 +197,8 @@ struct mlx5_wqe64 {
 /* MPW mode. */
 enum mlx5_mpw_mode {
 	MLX5_MPW_DISABLED,
-	MLX5_MPW,
+	MLX5_MPW, /* MPW is supported by the device. */
+	MLX5_MPW_USER_FORCED, /* MPW is supported and selected by the user. */
 	MLX5_MPW_ENHANCED, /* Enhanced Multi-Packet Send WQE, a.k.a MPWv2. */
 };
 
-- 
2.12.0

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2018-08-16 11:57 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-08-13  7:00 [dpdk-stable] [PATCH] net/mlx5: disable ConnectX-4 Lx Multi Packet Send by default Shahaf Shuler
2018-08-14 16:32 ` Yongseok Koh
2018-08-15 12:17 ` [dpdk-stable] [PATCH v2] " Shahaf Shuler
2018-08-15 17:11   ` Yongseok Koh
2018-08-16 11:57     ` Shahaf Shuler

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).